SEARCH · Engineering Papers

Results for “forward sensitivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

All sources NASA NTRS DOE OSTI

NASA NTRS2009

Hardware Implementation of Serially Concatenated PPM Decoder

A prototype decoder for a serially concatenated pulse position modulation (SCPPM) code has been implemented in a field-programmable gate array (FPGA). At the time of this reporting, this is the first known hardware SCPPM decoder. The SCPPM coding scheme, conceived for free-space optical communications with both deep-space and terrestrial applications in mind, is an improvement of several dB over the conventional Reed-Solomon PPM scheme. The design of the FPGA SCPPM decoder is based on a turbo decoding algorithm that requires relatively low computational complexity while delivering error-rate performance within approximately 1 dB of channel capacity. The SCPPM encoder consists of an outer convolutional encoder, an interleaver, an accumulator, and an inner modulation encoder (more precisely, a mapping of bits to PPM symbols). Each code is describable by a trellis (a finite directed graph). The SCPPM decoder consists of an inner soft-in-soft-out (SISO) module, a de-interleaver, an outer SISO module, and an interleaver connected in a loop (see figure). Each SISO module applies the Bahl-Cocke-Jelinek-Raviv (BCJR) algorithm to compute a-posteriori bit log-likelihood ratios (LLRs) from apriori LLRs by traversing the code trellis in forward and backward directions. The SISO modules iteratively refine the LLRs by passing the estimates between one another much like the working of a turbine engine. Extrinsic information (the difference between the a-posteriori and a-priori LLRs) is exchanged rather than the a-posteriori LLRs to minimize undesired feedback. All computations are performed in the logarithmic domain, wherein multiplications are translated into additions, thereby reducing complexity and sensitivity to fixed-point implementation roundoff errors. To lower the required memory for storing channel likelihood data and the amounts of data transfer between the decoder and the receiver, one can discard the majority of channel likelihoods, using only the remainder in operation of the decoder. This is accomplished in the receiver by transmitting only a subset consisting of the likelihoods that correspond to time slots containing the largest numbers of observed photons during each PPM symbol period. The assumed number of observed photons in the remaining time slots is set to the mean of a noise slot. In low background noise, the selection of a small subset in this manner results in only negligible loss. Other features of the decoder design to reduce complexity and increase speed include (1) quantization of metrics in an efficient procedure chosen to incur no more than a small performance loss and (2) the use of the max-star function that allows sum of exponentials to be computed by simple operations that involve only an addition, a subtraction, and a table lookup. Another prominent feature of the design is a provision for access to interleaver and de-interleaver memory in a single clock cycle, eliminating the multiple clock-cycle latency characteristic of prior interleaver and de-interleaver designs.

Moision, Bruce↗

NASA NTRS2012

Deriving Plasma Densities and Elemental Abundances from SERTS Differential Emission Measure Analysis

We use high-resolution spectral emission line data obtained by the SERTS instrument during three rocket flights to demonstrate a new approach for constraining electron densities of solar active region plasma.We apply differential emission measure (DEM) forward-fitting techniques to characterize the multithermal solar plasma producing the observed EUV spectra, with constraints on the high-temperature plasma from the Yohkoh Soft X-ray Telescope. In this iterative process, we compare line intensities predicted by an input source distribution to observed line intensities for multiple iron ion species, and search a broad range of densities to optimize chi-square simultaneously for the many available density-sensitive lines. This produces a density weighted by the DEM, which appears to be useful for characterizing the bulk of the emitting plasma over a significant range of temperature. This "DEM-weighted density" technique is complementary to the use of density-sensitive line ratios and less affected by uncertainties in atomic data and ionization fraction for any specific line. Once the DEM shape and the DEM-weighted density have been established from the iron lines, the relative elemental abundances can be determined for other lines in the spectrum. We have also identified spectral lines in the SERTS wavelength range that may be problematic

corona↗

NASA NTRSDate not supplied

Coherence Analysis of the Space Launch System using Unsteady Pressure Sensitive Paint

Transonic buffet forces are a major source of unsteady loading on launch vehicles, thus requiring accurate estimation for efficient vehicle design. The state of the art in modeling these unsteady loads utilizes wind-tunnel tests where the fluctuating pressures are measured by pressure transducers (PTs) at discrete locations on a rigid buffet model. These pressures are then integrated over the surface of the vehicle to yield a series of orthogonal centerline loads called buffet forcing functions (BFFs). Typically, the PT layout aims at resolving the pressure correlation along the longitudinal axis of the vehicle. As a result, the distribution of azimuthal correlation and its impact on the estimated BFFs are not well known. To fill these gaps, extremely high-spatial-resolution uPSP data were collected for three different configurations of the Space Launch System in the NASA Ames Research Center 11-Foot Transonic Unitary Plan Wind Tunnel. The spatio-temporal behavior of the pressure correlation on these vehicles is analyzed and flow features of interest are investigated. It is shown that terminal shocks interacting with turbulence are a source of increased azimuthal coherence, especially when the shock develops at a junction. Vortex shedding off the forward attachment hardware that connects the core stage to the solid rocket boosters (SRBs) is the most severe buffet environment on the vehicle. The associated fluctuating pressures are shown to be highly coherent as far as the vehicle tail and up to 40 degrees away from the boosters. For selected areas of the vehicle, factoring the azimuthal coherence into the attenuation of discrete-measurements-based BFFs results in under prediction relative to the BFFs obtained from full integration of the uPSP data.

buffet↗

NASA NTRS1962

Experimental Research on 4-Duct Tandem VTOL Aircraft Configurations

This paper presents a brief summary of several wind-tunnel investigations conducted at the Langley Research Center of the NASA to study the aerodynamic and stability and control characteristics of several VTOL aircraft configurations powered by four tilting ducted propellers arranged in tandem pairs. Specifically the two rear ducts could be mounted close alongside the upper rear portion of the fuselage with small wing panels attached to the outboard side of the ducts or could be mounted outboard on the tips of a small wing located high on the rear portion of the fuselage. The two front ducts were always mounted close inboard on the forward part of the fuselage and could be mounted either in a high or low position on the fuselage. The results of the investigation indicated that aircraft of this type could have acceptable aerodynamic and static longitudinal and lateral stability and control characteristics in both transition and normal cruise flight except for the possible qualification that the lateral force due to sideslip is abnormally high and might cause the aircraft to be too sensitive to side gusts.

VTOL AIRCRAFT↗

NASA NTRS2003

Air Cargo Transportation Route Choice Analysis

Using a unique feature of air cargo transshipment data in the Northeast Asian region, this paper identifies the critical factors that determine the transshipment route choice. Taking advantage of the variations in the transport characteristics in each origin-destination airports pair, the paper uses a discrete choice model to describe the transshipping route choice decision made by an agent (i.e., freight forwarder, consolidator, and large shipper). The analysis incorporates two major factors, monetary cost (such as line-haul cost and landing fee) and time cost (i.e., aircraft turnaround time, including loading and unloading time, custom clearance time, and expected scheduled delay), along with other controls. The estimation method considers the presence of unobserved attributes, and corrects for resulting endogeneity by use of appropriate instrumental variables. Estimation results find that transshipment volumes are more sensitive to time cost, and that the reduction in aircraft turnaround time by 1 hour would be worth the increase in airport charges by more than $1000. Simulation exercises measures the impacts of alternative policy scenarios for a Korean airport, which has recently declared their intention to be a future regional hub in the Northeast Asian region. The results suggest that reducing aircraft turnaround time at the airport be an effective strategy, rather than subsidizing to reduce airport charges.

Obashi, Hiroshi↗

NASA NTRSDate not supplied

Aeroacoustic Analysis using Dynamic Mode Decomposition of Unsteady Pressure-Sensitive Paint Measurements

In this paper, we present a new method for the diagnosis and analysis of aeroacoustic phenomena. Taking advantage of the well-known property that the measurements of the Unsteady Pressure-Sensitive Paint (uPSP) have much higher spatial resolution compared to those of the conventional pressure transducers, the method is based on the visualization and analysis of the outputs of the Dynamic Mode Decomposition (DMD) of the uPSP measurements. The uPSP measurements were collected with four Phantom high-speed cameras in the Ascent Transient Aerodynamics Test (ATAT) of the Space Launch System (SLS) Block 1 cargo vehicle in the 11-by-11-foot transonic test section of the Unitary Plan Wind Tunnel (UPWT) at NASA Ames Research Center in September 2019. The method presented in this paper is demonstrated by investigating an interesting phenomenon observed in the SLS ATAT – the vortex shedding tone generated by the forward attachment of the Solid Rocket Booster (SRB). As examples, the DMD outputs of the uPSP measurements in a subsonic test in the SLS ATAT are presented. It is shown the information retrieved from the DMD outputs of the uPSP measurements can be effectively used in the identification and diagnosis of the aeroacoustic phenomena. The work described in this paper is a part of NASA’s development of a new state-of-the-art uPSP capability in production wind tunnels. Funding was provided by the NASA Aerosciences Evaluation and Test Capabilities Portfolio Office.

acoustics↗

NASA NTRSDate not supplied

Aeroacoustic Analysis using Dynamic Mode Decomposition of Unsteady Pressure-Sensitive Paint Measurements

acoustics↗

NASA NTRS1993

A sensitivity study for pneumatic vortex control on a chined forebody

A study was conducted to assess the sensitivity of yaw control on a chined forebody to the longitudinal location of a blowing slot at the chine edge. In addition, the effects of port blowing were also studied. NASA Langley's thin-layer Navier-Stokes code CFL3D was used to compare flow field characteristics and total yawing moment coefficients for the blowing configurations. Based upon equivalent blowing momentum coefficients, a significant increase in yaw control effectiveness was attained from the forward slot, relative to the aft slot, and port blowing was less effective than either slot blowing configuration.

Boalbey, R. E.↗

NASA NTRS1995

Fission foil detector calibrations with high energy protons

Fission foil detectors (FFD's) are passive devices composed of heavy metal foils in contact with muscovite mica films. The heavy metal nuclei have significant cross sections for fission when irradiated with neutrons and protons. Each isotope is characterized by threshold energies for the fission reactions and particular energy-dependent cross sections. In the FFD's, fission fragments produced by the reactions are emitted from the foils and create latent particle tracks in the adjacent mica films. When the films are processed surface tracks are formed which can be optically counted. The track densities are indications of the fluences and spectra of neutrons and/or protons. In the past, detection efficiencies have been calculated using the low energy neutron calibrated dosimeters and published fission cross sections for neutrons and protons. The problem is that the addition of a large kinetic energy to the (n,nucleus) or (p,nucleus) reaction could increase the energies and ranges of emitted fission fragments and increase the detector sensitivity as compared with lower energy neutron calibrations. High energy calibrations are the only method of resolving the uncertainties in detector efficiencies. At high energies, either proton or neutron calibrations are sufficient since the cross section data show that the proton and neutron fission cross sections are approximately equal. High energy proton beams have been utilized (1.8 and 4.9 GeV, 80 and 140 MeV) for measuring the tracks of fission fragments emitted backward and forward.

Benton, E. V.↗

NASA NTRS2017

Radar Detectability Studies of Slow and Small Zodiacal Dust Cloud Particles. III. The Role of Sodium and the Head Echo Size on the Probability of Detection

We present a path forward on a long-standing issue concerning the flux of small and slow meteoroids, which are believed to be the dominant portion of the incoming meteoric mass flux into the Earth's atmosphere. Such a flux, which is predicted by dynamical dust models of the Zodiacal Cloud, is not evident in ground-based radar observations. For decades this was attributed to the fact that the radars used for meteor observations lack the sensitivity to detect this population, due to the small amount of ionization produced by slow-velocity meteors. Such a hypothesis has been challenged by the introduction of meteor head echo (HE) observations with High Power and Large Aperture radars, in particular the Arecibo 430 MHz radar. Janches et al. developed a probabilistic approach to estimate the detectability of meteors by these radars and initially showed that, with the current knowledge of ablation and ionization, such particles should dominate the detected rates by one to two orders of magnitude compared to the actual observations. In this paper, we include results in our model from recently published laboratory measurements, which showed that (1) the ablation of Na is less intense covering a wider altitude range; and (2) the ionization probability, Beta ip, for Na atoms in the air is up to two orders of magnitude smaller for low speeds than originally believed. By applying these results and using a somewhat smaller size of the HE radar target we offer a solution that reconciles these observations with model predictions.

meteorites↗

NASA NTRS2024

Mineral Dust Optical Properties for Remote Sensing and Global Modeling: A Review

Dust plays a key role in many Earth system processes and is ubiquitous in the Martian atmosphere. Various intensive field campaigns, laboratory analyses, space-based remote sensing missions, and global modeling efforts aim to characterize dust optical properties. This is a bountiful time for dust scientists, and yet the interpretation of retrievals and comparison to models remains complicated by various conflicting assumptions that are part of each algorithm. For example, the conversion of satellite radiance measurements into products like aerosol optical depth for model evaluation depends upon aerosol properties like particle size and shape that are often prescribed and not part of the retrieval. Conversely, the model calculation of aerosol optical depth often uses different assumptions. The goal of this review is to first document algorithmic assumptions by various satellite retrieval products and models, and identify where there is consistency and where there are differences. In general, the differences documented in this paper reflect uncertainties resulting from incomplete observational characterization of dust aerosols and limitations in our understanding. Second, we note what observations might reduce uncertainties in our knowledge and bring greater consistency to retrievals and models, allowing for a more rigorous and harmonious comparison. The lack of comprehensive and realistic shape models for dust is an outstanding issue, such that closure between forward modeling from particle refractive index, shape, and size and observed optical properties cannot be achieved. Limitations in the computational methods that must be applied to model scattering from complex shapes also makes accurate optical modeling for dust challenging. Field observations indicate the persistence of coarse and giant dust particles at higher altitudes and farther downwind from their source than previously expected. Remote sensing retrieval algorithms based on observations at visible wavelengths have limited sensitivity to these particles and generally do not consider them, although a recent product based on longwave radiances is encouraging. Current measurements of the refractive index of bulk dust and fundamental dust minerology components such as hematite vary widely, inhibiting attempts to represent the variability in dust optical properties and forcing, as expected from different major dust source regions on Earth that have varying mineralogical composition. Some remote sensing retrieval algorithms allow for limited refractive index variability in their inversion solutions through mixing with other fine mode aerosol models, or optimizing the single scattering albedo, but Earth system models surveyed for this paper assume a globally uniform, size-invariant refractive index. Although no Martian dust samples have yet been returned to Earth, remote sensing observations indicate that Martian dust is globally homogenous in composition, and a single spectral refractive index assumption has been widely adopted to represent Martian dust. The lack of comprehensive, statistically representative measurements of dust particle microphysical properties (size distribution, morphology, complex index of refraction spectra, internal structure heterogeneity), and the resulting optical properties, limits our ability to verify the fidelity of these assumptions. A chain of measurements is needed, ranging from characterizing individual dust mineralogy components (e.g., pure hematite and goethite) to in situ sampling of complex atmospheric aerosol mixtures. Such results could be applied to both remote sensing retrievals that characterize the optical properties of the total aerosol burden in the atmosphere from total radiance measurements, and to global models that represent the total aerosol burden in the atmosphere by building it up from the balance of individual aerosol sources and sinks.

Aeolian dust↗

NASA NTRS1989

Integrated aerodynamic-structural design of a forward-swept transport wing

The introduction of composite materials is having a profound effect on aircraft design. Since these materials permit the designer to tailor material properties to improve structural, aerodynamic and acoustic performance, they require an integrated multidisciplinary design process. Futhermore, because of the complexity of the design process, numerical optimization methods are required. The utilization of integrated multidisciplinary design procedures for improving aircraft design is not currently feasible because of software coordination problems and the enormous computational burden. Even with the expected rapid growth of supercomputers and parallel architectures, these tasks will not be practical without the development of efficient methods for cross-disciplinary sensitivities and efficient optimization procedures. The present research is part of an on-going effort which is focused on the processes of simultaneous aerodynamic and structural wing design as a prototype for design integration. A sequence of integrated wing design procedures has been developed in order to investigate various aspects of the design process.

Haftka, Raphael T.↗

NASA NTRS2008

Dynamic Stability and Gravitational Balancing of Multiple Extended Bodies

Feasibility of a non-invasive compensation scheme was analyzed for precise positioning of a massive extended body in free fall using gravitational forces influenced by surrounding source masses in close proximity. The N-body problem of classical mechanics is a paradigm used to gain insight into the physics of the equivalent N-body problem subject to control forces. The analysis addressed how a number of control masses move around the proof mass so that the proof mass position can be accurately and remotely compensated when exogenous disturbances are acting on it, while its sensitivity to gravitational waves remains unaffected. Past methods to correct the dynamics of the proof mass have considered active electrostatic or capacitive methods, but the possibility of stray capacitances on the surfaces of the proof mass have prompted the investigation of other alternatives, such as the method presented in this paper. While more rigorous analyses of the problem should be carried out, the data show that, by means of a combined feedback and feed-forward control approach, the control masses succeeded in driving the proof mass along the specified trajectory, which implies that the proof mass can, in principle, be balanced via gravitational forces only while external perturbations are acting on it. This concept involves the dynamic stability of a group of massive objects interacting gravitationally under active control, and can apply to drag-free control of spacecraft during missions, to successor gravitational wave space borne sensors, or to any application requiring flying objects to be precisely controlled in position and attitude relative to another body via gravitational interactions only.

Quadrelli, Marco↗

NASA NTRS1992

A dynamic study of fragmentation and energy loss during high velocity impact

Research conducted under this contract can be divided into two main areas: hypervelocity (in the range up to 7 km/s) and high velocity (less than 1 km/s). Work in the former was performed at NASA-MSFC using the Light Gas Gun Facility. The lower velocity studies were conducted at Auburn University using the ballistic gun. The emphasis of the project was on the hypervelocity phenomenon especially in the characterization of the debris cloud formed by the primary impact events. Special devices were made to determine the angular distributions of momentum and energy of the debris cloud as a function of impact conditions. After several iteration processes, it was decided to concentrate on the momentum effort. Prototype devices were designed, fabricated, and tested. These devices were based on the conservation of momentum. Distributions of the debris cloud formed were measured by determining the amount of momentum transferred from the debris cloud to strategically placed pendulum measurement devices. The motion of the pendula was monitored using itegrated opto-interrupters. The distribution of momentum in the debris cloud was found to be a strong function of the impact condition. Small projectiles at high velocities were observed to produce finely dispersed debris whereas large projectiles generated discrete particles in the debris. Results also show that the momentum in the forward direction was enhanced due to the impact. This phenomenon of momentum multiplication was also observed in other studies and in computer simulations. It was initially planned to determine the energy distribution using deformation energy in a rod with strain gauges. Results from preliminary studies show that this technique is acceptable but too tedious. A new technique was explored based on measuring the heating effect of the debris cloud using an IR camera. The feasibility and sensitivity was established at Auburn University. This type of energy distribution measurement method can easily be adapted to the gas gun facility at MSFC. The objective of the lower velocity studies at Auburn was to simulate the damage produced in advanced materials by the lower energy debris cloud.

Zee, Ralph H.↗

NASA NTRS2007

Development of a Pressure Sensitive Paint System for Measuring Global Surface Pressures on Rotorcraft Blades

This paper will describe the results from a proof of concept test to examine the feasibility of using Pressure Sensitive Paint (PSP) to measure global surface pressures on rotorcraft blades in hover. The test was performed using the U.S. Army 2-meter Rotor Test Stand (2MRTS) and 15% scale swept rotor blades. Data were collected from five blades using both the intensity- and lifetime-based approaches. This paper will also outline several modifications and improvements that are underway to develop a system capable of measuring pressure distributions on up to four blades simultaneously at hover and forward flight conditions.

Watkins, A. Neal↗

NASA NTRSDate not supplied

Optimizing Proprotor Blades Using Coupled Aeroacoustic and Aerodynamic Sensitivities

A quieter and aerodynamically more efficient proprotor design requires high-fidelity and well-integrated optimization and analysis tools. To fulfill that requirement, the present paper delivers a methodology based on multidisciplinary, adjoint-based, discrete optimization. SU2-based code development involves the implementation of aeroacoustic analysis, adjoint computations, and integrations into a multidisciplinary rotorcraft optimization suite. Submodules utilized in the optimization are verified with wind tunnel data to demonstrate the accuracy of aerodynamic and aeroacoustic analyses. The developed code is used for NASA's helically twisted proprotor to maximize the aeroacoustic performance of the proprotor while holding thrust constant. The optimization process considers multiple flight conditions (hence, multipoint), which are forward flight and hovering. As an outcome of the analyses, the optimized blade design propagates lower noise as perceived by multiple observers in both flight conditions

R Omur Icke↗

NASA NTRS1974

Application of a parameter identification technique to a hingeless helicopter rotor

A mathematical model of a gyro-controlled, three-bladed hingeless helicopter rotor was developed and parameters of the model were estimated using a parameter identification technique. The flapping and feathering degrees of freedom of the blades were modeled. The equations of the model contain time-varying, periodic coefficients due to the forward speed of the rotor. A digital simulation of the analytical model was compared with wind-tunnel measurements to establish the validity of the model. Comparisons of steady-state and transient solutions of the analytical model with the tunnel measurements gave reasonably good matching of gyro angle but less satisfactory matching of hub moment measurements. Further improvements were obtained by use of a parameter identification technique to adjust as many as 10 parameters of the analytical model. The sensitivity of the blade response to small changes in the parameters was also calculated.

Kanning, G.↗

NASA NTRS1980

Comparison of calculated and measured helicopter rotor lateral flapping angles

Calculated and measured values of helicopter rotor flapping angles in forward flight are compared for a model rotor in a wind tunnel and an autogiro in gliding flight. The lateral flapping angles can be accurately predicted when a calculation of the nonuniform wake-induced velocity is used. At low advance ratios, it is also necessary to use a free wake geometry calculation. For the cases considered, the tip vortices in the rotor wake remain very close to the tip-path plane, so the calculated values of the flapping motion are sensitive to the fine details of the wake structure, specifically the viscous core radius of the tip vortices.

Johnson, W.↗