Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “first principles calculation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Thermodynamics of boron incorporation in BGaN

We study the thermodynamics of boron (B) incorporation into gallium nitride (GaN) using first-principles calculations. In the dilute limit, we have calculated the formation energies of different configurations of the B impurity in GaN and found that substitution on the cation site is favored over substitution on the anion site. Furthermore, under p-type conditions, interstitial boron can become the more favorable configuration and will ultimately limit the p-type conductivity. At higher B concentrations we use the generalized quasi-chemical approximation to elucidate the thermodynamic stability of boron gallium nitride (BGaN) alloys. We also investigate the effects of strain, which will be present if BGaN alloys are grown pseudomorphically on a GaN substrate.Without strain, B incorporation at typical growth conditions is limited to about 1.4% at 800 °C. Pseudomorphic strain raises the limit to 3.0% at the same temperature, close to experimentally observed levels of B incorporation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Elastic behavior of binary and ternary refractory multi-principal-element alloys

Elastic properties are essential to the mechanical performance of materials, and therefore, can be tuned to design high-performance materials. In this study, the elastic constants of the equiatomic ternary refractory multi-principal-element alloys, NbTiV, and MoNbV, were investigated, using in-situ neutron diffraction and first-principles calculations. The experimentally measured and theoretically predicted elastic constants show a good agreement. The alloying effect of adding Ti and Mo into NbV base alloy on the elastic constants is studied. Particularly, adding Ti elements into the NbV alloy results in the increase of the Zener anisotropy ratio from 0.59 to 0.99, leading to the formation of the elastically isotropic NbTiV alloy, while the addition of Mo decreases the anisotropy ratio to 0.52. Pugh’s ratio (B/G), Cauchy pressure (C 12 -C 44 ), and Poisson’s ratio (ν) are used to predict the brittle/ductile nature of the studied alloys, which is consistent with the mechanical results. The present work provides valuable insights into the design of ductile and strong refractory high-entropy alloys by tuning the elastic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2020

On the elastic anisotropy of the entropy-stabilized oxide (Mg, Co, Ni, Cu, Zn)O compound

Herein, we study the elastic properties of the entropy-stabilized oxide (Mg, Co, Ni, Cu, Zn)O using experimental and first principles techniques. Our measurements of the indentation modulus on grains with a wide range of crystallographic orientations of the entropy-stabilized oxide revealed a high degree of elastic isotropy at ambient conditions. First principles calculations predict mild elastic anisotropy for the paramagnetic structure, which decreases when the system is considered to be non-magnetic. When the antiferromagnetic state of CoO, CuO, and NiO is accounted for in the calculations, a slight increase in elastic anisotropy is observed, suggesting a coupling between magnetic ordering and the orientation dependent elastic properties. Furthermore, an examination of the local structure reveals that the isotropy is favored through local ionic distortions of Cu and Zn—due to their tendencies to form tenorite and wurtzite phases. The relationships between the elastic properties of the multicomponent oxide and those of its constituent binary oxides are reviewed. These insights open up new avenues for controlling isotropy for technological applications through tuning composition and structure in the entropy-stabilized oxide or the high-entropy compounds in general.

Entropy↗
DOE OSTI2023

Modeling laser interactions with aluminum and tantalum targets using a hybrid atomistic-continuum model

A hybrid atomistic-continuum method can model the microstructure evolution of metals subjected to laser irradiation. This method combines classical molecular dynamics (MD) simulations with the two-temperature model (TTM) to account for the laser energy absorption and heat diffusion behavior. Accurate prediction of the temperature evolution in the combined MD-TTM method requires reliable accuracy in electron heat capacity, electron thermal conductivity, and electron–phonon coupling factor across the temperatures generated. This study uses the electronic density of states (DOS) obtained from first-principle calculations. The calculated electron temperature-dependent parameters are used in MD-TTM simulations to study the laser metal interactions in FCC and BCC metals and the phenomenon of laser shock loading and melting. This study uses FCC Al and BCC Ta as model systems to demonstrate this capability. When subjected to short pulsed laser shocks, the dynamic failure behavior predicted using temperature-dependent parameters is compared with the experimentally reported single-crystal and nanocrystalline Al and Ta systems. The MD-TTM simulations also investigate laser ablation and melting behavior of Ta to compare with the ablation threshold reported experimentally. In conclusion, this manuscript demonstrates that integrating the temperature-dependent parameters into MD-TTM simulations leads to the accurate modeling of the laser–metal interaction and allows the prediction of the kinetics of the solid–liquid interface.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Superconductivity and topological properties of MgB 2 -type diborides from first principles

The superconductivities and topological properties of MgB 2 -type diborides are investigated by means of first-principles calculations with different exchange-correlation functionals. Functionals with the van der Waals (vdW) correction (such as OptB88-vdW) may predict critical temperature (T c ) comparable with experimental results for several MgB 2 -type superconductors, particularly for the pristine MgB 2 (39.3 vs 39 K). Interestingly, the spin-fluctuation is found to play a significant role in the superconducting behavior of diborides with transition metal elements, and their T c can be enhanced monotonically by applying tensile strains. Furthermore, Dirac surface states of Ta B 2 and NbB 2 are revealed, suggesting their potential use as topological superconducting materials. Finally, this paper provides a useful guideline for ab initio studies of superconductivities and topological properties of vdW layered materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Digital twins and deep learning segmentation of defects in monolayer MX 2 phases

Developing methods to understand and control defect formation in nanomaterials offers a promising route for materials discovery. Monolayer MX 2 phases represent a particularly compelling case for defect engineering of nanomaterials due to the large variability in their physical properties as different defects are introduced into their structure. However, effective identification and quantification of defects remain a challenge even as high-throughput scanning transmission electron microscopy methods improve. This study highlights the benefits of employing first principles calculations to produce digital twins for training deep learning segmentation models for defect identification in monolayer MX 2 phases. Around 600 defect structures were obtained using density functional theory calculations, with each monolayer MX 2 structure being subjected to multislice simulations for the purpose of generating the digital twins. Several deep learning segmentation architectures were trained on this dataset, and their performances evaluated under a variety of conditions such as recognizing defects in the presence of unidentified impurities, beam damage, grain boundaries, and with reduced image quality from low electron doses. Further, this digital twin approach allows benchmarking different deep learning architectures on a theory dataset, which enables the study of defect classification under a broad array of finely controlled conditions. It thus opens the door to resolving the underpinning physical reasons for model shortcomings and potentially chart paths forward for automated discovery of materials defect phases in experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Carbon trimer as a 2 eV single-photon emitter candidate in hexagonal boron nitride: A first-principles study

The generation of single-photon emitters in hexagonal boron nitride around 2 eV emission is experimentally well recognized; however, the atomic nature of these emitters is unknown. In this Letter, we use first-principles calculations to demonstrate that carbon trimer substitutional defect (C 2 C N ) is a possible source of 2 eV single-photon emitter in hBN. Here, we showcase the calculations of a complete set of static and dynamical properties related to quantum defects, including exciton-defect couplings and electron-phonon interactions, from both density functional theory and many-body perturbation theory. In particular, we show that it is critical to consider both radiative and nonradiative processes when comparing with experimental lifetime for known 2 eV emitters. We find that C 2 C N has several key physical properties matching the ones of experimentally observed single-photon emitters. These include the zero-phonon line (2.13 eV), Huang-Rhys factor (1.35), photoluminescence lifetime (2.19 ns), phonon-sideband energy (180 meV), and photoluminescence spectrum. The identification of defect candidates for 2 eV emission paves the way for controllable single-photon emission generation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Unlocking Mesoscopic Disorder in Graphitic Carbon with Spectroelectrochemistry

Intrinsic structural and oxidic defects activate graphitic carbon electrodes towards electrochemical reactions underpinning energy conversion and storage technologies. Yet, these defects can also disrupt the long-range and periodic arrangement of carbon atoms, thus, the characterization of graphitic carbon electrodes necessitates in-situ atomistic differentiation of graphitic regions from mesoscopic bulk disorder. Here, we leverage the combined techniques of in-situ attenuated total reflectance infrared spectroscopy and first-principles calculations to reveal that graphitic carbon electrodes exhibit electric-field dependent infrared activity that is sensitive to the bulk mesoscopic intrinsic disorder. With this platform, we identify graphitic regions from amorphous domains by discovering that they demonstrate opposing electric-field-dependent infrared activity under electrochemical conditions. Our work provides a roadmap for identifying mesoscopic disorder in bulk carbon materials under potential bias.

Disordered graphitic carbon electrodes↗
DOE OSTI2026

Altermagnetism Induced Surface Chern Insulator

We propose a new pathway to the quantized anomalous Hall effect (QAHE) by coupling an altermagnet to a topological crystalline insulator (TCI). The former gaps the topological surface states of the TCI, thereby realizing the QAHE in a robust and switchable platform with near-vanishing magnetization. We demonstrate the feasibility of this approach by studying a slab of the TCI SnTe coupled to an altermagnetic RuO 2 layer. Our first-principles calculations reveal that the d-wave altermagnetism in RuO 2 induces a 7 meV gap to the Dirac surface states on the (110) surface of SnTe, producing a finite anomalous Hall effect. Our approach generalizes to broader classes of altermagnetic materials and TCIs, thereby providing a family of topological altermagnetic heterostructures with small or vanishing magnetization that support nontrivial Chern numbers. In conclusion, our results highlight a promising new topological platform with great tunability and applications to spintronics.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Temperature dependence of electron-phonon interactions in vanadium

First-principles calculations were used to study the Fermi surface of body-centered cubic vanadium at elevated temperatures. Supercell calculations accounted for effects of thermal atom displacements on band energies, and band unfolding was used to project the spectral weight of the electron states into the Brillouin zone of a standard bcc unit cell. An electronic topological transition (ETT, or Lifshitz transition) occurred near the Γ point with increasing temperature, but the large thermal smearings from the atomic disorder and the Fermi-Dirac distribution reduced the effect of this ETT on the electron-phonon interactions. The phonon dispersions showed thermal stiffening of their Kohn anomalies near the Γ point and of the longitudinal N phonon mode. Finally, in general the effects of the ETT were overcome by the thermal smearing of the Fermi surface that reduces the spanning vector densities for anomalous phonon modes.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Coexisting structural disorder and robust spin-polarization in half-metallic FeMnVAl

We report half-metallic ferromagnets (HMFs) are one of the most promising materials in the field of spintronics due to their unique band structure, consisting of one spin subband having metallic characteristics along with another subband with semiconductor-like behavior. In this work, we report the synthesis of a novel quaternary Heusler alloy—FeMnVAl—and we have studied the structural, magnetic, transport, and electronic properties complemented with first-principles calculations. Among different possible structurally ordered arrangements, the optimal structure is identified by theoretical energy minimization. The corresponding spin-polarized band-structure calculations indicate the presence of a half-metallic ferromagnetic ground state. A detailed and careful investigation of the x-ray diffraction data, Mössbauer spectra, and nuclear magnetic resonance spectra suggests the presence of site disorder between the Fe and Mn atoms in the stable ordered structure of the system. The magnetic susceptibility measurement clearly establishes a ferromagnetic-like transition below ~213 K. The Fe Mössbauer spectrometry measurements suggest that only the Mn spins could be responsible for the magnetic order, which is consistent with our theoretical calculation. Surprisingly, the density-functional-theory calculations reveal that the spin-polarization value is almost immunized (92.4% → 90.4%) from the Mn-Fe structural disorder, even when nonmagnetic Fe and moment-carrying Mn sites are entangled inseparably. The robustness of spin polarization and half-metallicity in the studied FeMnVAl compound comprising structural disorder is thus quite interesting and could provide a new direction to investigate and understand the exact role of disorders on spin polarization in this class of materials, beyond the available knowledge.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Hex-C 558 : A new porous metallic carbon allotrope for lithium-ion battery anode

Due to the limited specific capacity of graphite anodes in lithium-ion batteries (LIBs), it is imperative to find alternatives with better performance. Here in this work, we propose, for the first time, a three dimensional (3D) porous metallic 5-5-8 carbon monolith with hexagonal lattice as a potential candidate. With 5-5-8 carbon nanoribbon as the building block, this material, named Hex-C558, goes beyond graphene-nanoribbon-based 3D porous carbon structures. Using first-principles calculations, we show that Hex-C 558 is not only dynamically and thermally stable, but also is energetically more favorable than many other theoretically predicted carbon allotropes. More importantly, Hex-C 558 is metallic with ordered ionic conducting channels and possesses a low mass density of 1.05 gcm -3 , exhibiting great potential for ion-battery applications. As an anode for LIBs, Hex-C558 possesses a large specific capacity of 591 mAhg -1 , low diffusion energy barrier of 0.27 eV (at low Li concentration) and 0.52 eV (at high Li concentration), a low open-circuit voltage of 0.51 V, and a small volume change of 2.4%. This work provides a new route for the design and synthesis of novel carbon materials for battery applications by using pentagon-based building units.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Density functional theory-based surrogate kinetic models for heterogeneous reactions of hydrocarbon intermediates on silicon carbide

The increasing demand for high-performance materials in advanced technologies highlights the importance of achieving a fundamental understanding and potential control of silicon carbide (SiC) deposition processes. However, existing models often lack sufficient theoretical detail, relying heavily on empirical data and offering limited predictive capability. In particular, the complex surface chemistry governing SiC growth remains poorly understood. This study addresses these challenges by employing density functional theory (DFT) to investigate key heterogeneous reactions involving hydrocarbon intermediates on SiC surfaces, including dehydrogenation, hydrogenation, and carbon deposition. Transition state searches were conducted to identify reaction pathways and energy barriers. While first-principles calculations offer high accuracy, they are computationally intensive. To extend the utility of these first-principles results, vibrational analyses were performed using phonon-based statistical thermochemistry to compute temperature-dependent reaction rates which were used to develop Arrhenius-type surrogate kinetic models. Furthermore, the resulting framework provides a more rigorous, physically grounded basis for integrating atomistic insights into continuum-scale modeling, ultimately enabling improved prediction and optimization of SiC film growth in high-performance material systems.

Density Functional Theory↗
DOE OSTI2020

Thermal conductivity of rutile germanium dioxide

Power electronics seek to improve power conversion of devices by utilizing materials with a wide bandgap, high carrier mobility, and high thermal conductivity. Due to its wide bandgap of 4.5 eV, b-Ga 2 O 3 has received much attention for high-voltage electronic device research. However, it suffers from inefficient thermal conduction that originates from its low-symmetry crystal structure. Rutile germanium oxide (r-GeO 2 ) has been identified as an alternative ultra-wide-bandgap (4.68 eV) semiconductor with predicted high electron mobility and ambipolar dopability; however, its thermal conductivity is unknown. Here, we characterize the thermal conductivity of r-GeO 2 as a function of temperature by first-principles calculations, experimental synthesis, and thermal characterization. The calculations predict an anisotropic phonon-limited thermal conductivity for r-GeO 2 of 37W m –1 K –1 along the a direction and 58W m –1 K –1 along the c direction at 300K where the phonon-limited thermal conductivity predominantly occurs via the acoustic modes. Experimentally, we measured the value of 51W m –1 K –1 at 300K for hot-pressed, polycrystalline r-GeO2 pellets. The measured value is close to our directionally averaged theoretical value, and the temperature dependence of ~1/T is also consistent with our theory prediction, indicating that thermal transport in our r-GeO 2 samples at room temperature and above is governed by phonon scattering. Furthermore, our results reveal that high-symmetry UWBG materials, such as r-GeO 2 , may be the key to efficient power electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effects of aluminum content on thermoelectric performance of Al x CoCrFeNi high-entropy alloys

Introducing a non-regular distribution in the mass and bonding by including distinctly different elements can reduce the phonon transport even within structurally well-ordered materials. These distributions are a quality of all high-entropy alloys (HEAs), however the inclusion of aluminum in Al x CoCrFeNi is particularly impactful due to the large mismatch in atomic mass with other components. The resultant low phonon conductivity is a requirement for high thermoelectric performance, motivating the investigation of the effects of Al content on phonon transport as well as other thermoelectric properties. This work examines the phonon and electron transport and thermoelectric conversion properties with various Al contents (0 ≤ x Al ≤ 2) in this Cantor alloy using first-principles calculations, molecular dynamics, and semi-classical Boltzmann transport theory. The calculated phonon density of states and thermoelectric properties present reasonable agreements with experiments, including neutron scattering. A large reduction of phonon conductivity (k L ) is observed even with low x Al s, which we attribute to effective phonon scatterings by the large mass mismatch. However, its temperature dependence is not significant, demonstrating a minor contribution of interphonon scattering. In contrast, electrical conductivity (σ) and Seebeck coefficient (S) increase with temperature at higher x Al s with body-centered cubic structures. Therefore, the thermoelectric figure of merit (ZT) of Al x CoCrFeNi HEAs is enhanced by increasing the Al content mainly due to the increase of the thermoelectric power factor (σS 2 ) at high temperatures, while at low temperatures the phonon-scattering enhancement by mass mismatch is also important.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Structural, electronic, and magnetic properties of CoFeVGe-based compounds: Experiment and theory

We have carried out a combined theoretical and experimental investigation of both stoichiometric and nonstoichiometric CoFeVGe alloys. In particular, we have investigated CoFeVGe, Co 1.25 Fe 0.75 VGe, Co 0.75 Fe 1.25 VGe, and CoFe 0.75 VGe bulk alloys. Our first principles calculations suggest that all four alloys show ferromagnetic order, where CoFeVGe, Co 1.25 Fe 0.75 VGe, and Co 0.75 Fe 1.25 VGe are highly spin polarized with spin polarization values of over 80%. However, the spin polarization value of CoFe 0.75 VGe is only about 60%. We have synthesized all four samples using arc melting and high-vacuum annealing at 600 °C for 48 hours. The room temperature x-ray diffraction of these samples exhibits a cubic crystal structure with disorder. All the samples show single magnetic transitions at their Curie temperatures, where the Curie temperature and high field (3T) magnetization are 288 K and 42 emu/g; 305 K and 1.5 emu/g; 238 K and 39 emu/g; and 306 K and 35 emu/g for CoFeVGe, Co 1.25 Fe 0.75 VGe, Co 0.75 Fe 1.25 VGe, and CoFe 0.75 VGe, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Elastic Properties and Deformation Mechanisms in the van der Waals Single-Crystalline Indium Selenide

The bulk van der Waals (vdW) single-crystalline indium selenide (β-InSe) displays exceptional plasticity in a layered crystalline form at both micro- and macroscale. However, the nanoscale origin of plasticity remains unclear. Herein, an atomic-level study on the deformation mechanisms of InSe by using first-principles calculations is reported. Remarkable anisotropic elasticity is observed in the vdW InSe layered crystal, and the stiffness is dramatically softened because of the vdW gap in the layered structure. The simulations capture the distinct fracture modes in the uniaxial tensile deformation, depending on the loading directions—brittle fracture in the [100] and [110] directions while ductile failure in the [001] direction. The InSe layered crystal structure exhibits superplastic deformability under uniaxial compression. Different transition pathways, including interlayer tangling, amorphization, and cross-linking, are tracked along respective deformation directions. The unprecedented plasticity of InSe layered crystals can be attributed to the phase transition coupled with interlayer gliding and cross-layer dislocation slipping. Here, this study deepens our understanding of the deformation mechanisms of layered materials at the atomistic level and provides insights into tailoring material properties for low-dimensional material design based on its deformation mechanisms.

2D materials↗
DOE OSTI2024

On the origin of magnetic anisotropy in 4f-free ferromagnets based on the CaCu 5 structure *

Using first-principles calculations, we investigate the origin of magnetocrystalline anisotropy in a series of 4f-electron-free intermetallics with CaCu 5 -based structures: YCo 5 , YCo 4 B, and Y 3 Co 13 B 2 . The electronic structure of these compounds is characterized by a set of narrow 3d bands near the Fermi level. In YCo 5 the easy-axis anisotropy originates primarily in the spin–orbit coupling-induced mixing of the electronic states with Co d x 2 -y 2 and d xy character. The analysis of k-resolved anisotropy shows that positive contributions accumulate from the entire Brillouin zone but are particularly large near the k z = 0 plane. The analysis of the single-site and two-site terms reveals a large positive single-site contribution to the magnetocrystalline anisotropy from the Co atoms on the honeycomb sublattice, along with two-site contributions from both honeycomb and kagome sublattices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗