Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrons”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Electronic structure of reduced CeO 2 (111) surfaces interacting with hydrogen as revealed through electron energy loss spectroscopy in comparison with theoretical investigations

Based on both, ab-initio cluster calculations as well as periodic density functional based loss function calculations, we have assigned the origins of the valence electron excitation regime in electron energy loss spectra of well-ordered ceria films in (111) orientation at various states of reduction as well as after exposing the reduced films to hydrogen from the gas phase (Li et al, Angew. Chem. Int. Ed., 58 (2019) 14686–14693). The explicit calculation of intensity distributions using the dipole approximation allow us to draw conclusions about the nature of oxygen vacancies, which occur upon reduction and how those interact with hydrogen to form hydride species. Herein, we also reports a brief discussion of vibrational excitations of hydrogen loaded ceria and corroborates previous interpretations, based on inelastic neutron scattering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic impact of Ni2P nanoparticle size on hydrogenation rates

Nickle phosphide, Ni2P, nanoparticles supported on SiO2 show a marked volcano shaped size dependence. Kinetic analysis and physicochemical characterization shows the electron density of Ni to increase with increasing Ni2P size, enhancing in turn the H2 adsorption strength. For particles below 15 nm, H adsorbs weakly causing a low surface coverage of H, gradually increasing with particle size. For large particles, hydrogen binds too strongly causing a high coverage but low catalytic activity. The remarkable size dependence of the electronic properties show that Ni2P particle size can be used to fine-tune its activity for hydrogenation.

Ni2P size effect, Electron density, H2 adsorption ↗

Transmission electron microscopy characterization of the fuel-cladding chemical interactions in HT9 cladded U-10Zr fuel

Fuel cladding chemical interaction (FCCI) is a key phenomenon needs to be better understood to establish the design basis for U-10Zr metallic fuel performance. Characterizing the microstructure and chemical composition of FCCI at micron and sub-micron scale is critically important toward a more mechanistic understanding of FCCI phenomenon and its potential effects on cladding integrity and metallic fuel performance. This paper, by using transmission electron microscopy, investigated the FCCI region in HT9 cladded U-10Zr fuel irradiated to 5.7% FIMA burnup at a peak inner cladding temperature of 615 °C in Fast Flux Test Facility (FFTF). Four distinct layers are identified in the FCCI region. The migration of Fe into the fuel side leads to the formation of several U-Zr-Fe ternary phases, including ?-Fe0.5Zr0.32U0.18, e-Fe0.3Zr0.4U0.3, and ?-Fe0.06Zr0.23U0.71, mingled with UFe2, U6Fe, and U phase at various Fe penetration depth up to ~ 150 µm. On the cladding side, grain coarsening and significant lanthanides infiltration along grain boundaries are observed. Laves phase, (Fe,Cr)2(Mo,W), which typically does not exist in fresh HT9, is identified in a wide radial range in the cladding. The typical HT9 martensitic lath structure and pre-existing M23C6 precipitates disappear, partially or completely, depending on the radial distance from the fuel-cladding interface. Those microstructural and compositional changes could cause mechanical degradation in the HT9 cladding. The present characterization results will improve the understanding of FCCI phenomenon and facilitate the development of microstructure-informed FCCI modeling for metallic fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

An Open-Cell Environmental Transmission Electron Microscopy Technique for In Situ Characterization of Samples in Aqueous Liquid Solutions

The desire to image specimens in liquids has led to the development of open-cell and closed-cell techniques in transmission electron microscopy (TEM). The closed-cell approach is currently more common in TEM and has yielded new insights into a number of biological and materials processes in liquid environments. The open-cell approach, which requires an environmental TEM (ETEM), is technically challenging but may be advantageous in certain circumstances due to fewer restrictions on specimen and detector geometry. Here, we demonstrate a novel approach to open-cell liquid TEM, in which we use salt particles to facilitate the in situ formation of droplets of aqueous solution that envelope specimen particles coloaded with the salt. This is achieved by controlling sample temperature between 1 and 10°C and introducing water vapor to the ETEM chamber above the critical pressure for the formation of liquid water on the salt particles. Our use of in situ hydration enables specimens to be loaded into a microscope in a dry state using standard 3 mm TEM grids, allowing specimens to be prepared using trivial sample preparation techniques. Furthermore, our future aim will be to combine this technique with an in situ light source to study photocorrosion in aqueous environments.

47 OTHER INSTRUMENTATION↗

Electron Spin-Polarization Dependent Damage to Chiral Amino Acid l-Histidine

The damage of approximately monolayer films of L-histidine by low-energy spin-polarized electrons (SPE) ejected from a magnetized cobalt substrate has been probed using X-ray photoelectron spectroscopy (XPS). Average damage cross sections for N-containing motifs of L-histidine are 25-30 and 2-5 Mb for zwitterions and neutral molecules, respectively. Here, the magnetization direction of the substrate, which controls the ejected SPE helicity, was reversed in situ, and statistically significant differences in the damage cross sections of 10-30% were measured between positive and negative electron helicities. This is the first measurement of spin dichroism (SD) in an amino acid. The differential cross sections suggest that inelastic scattering of SPE with chiral molecules could contribute to the persistence of one enantiomer vs the other under certain irradiation conditions, particularly for the zwitterionic species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lattice Strain Measurement of Core@Shell Electrocatalysts with 4D Scanning Transmission Electron Microscopy Nanobeam Electron Diffraction

Strain engineering enables the direct modification of atomic bonding and is currently an active area of research aimed at improving electrocatalytic activity. However, directly measuring the lattice strain of individual catalyst nanoparticles is challenging, especially at the scale of a single unit cell. In this study, we quantitatively map the strain present in rhodium@platinum (core@shell) nanocube electrocatalysts using conventional aberration-corrected scanning transmission electron microscopy (STEM) and the recently developed technique of 4D-STEM nanobeam electron diffraction. We demonstrate that 4D-STEM combined with data preconditioning allows for quantitative lattice strain mapping with subpicometer precision and without the influence of scan distortions. When combined with multivariate curve resolution, 4D-STEM allows us to distinguish the nanocube core from the shell and to quantify the unit cell size as a function of distance from the core–shell interface. Our results demonstrate that 4D-STEM has significant precision and accuracy advantages in strain metrology of catalyst materials compared to aberration-corrected STEM imaging and is beneficial for extracting information about the evolution of strain in catalyst nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase Transitions in Metal–Organic Frameworks Directly Monitored through In Situ Variable Temperature Liquid-Cell Transmission Electron Microscopy and In Situ X-ray Diffraction

Zr 6 -based metal–organic frameworks (MOFs) with tetratopic organic linkers have been extensively investigated owing to their versatile structural tunability. While diverse topologies and polymorphism in the resulting MOFs are often encountered with tetratopic linkers and Zr 6 nodes, reports on phase transitions within these systems are rare. Thus, we have a limited understanding of polymorph transformations, hindering the rational development of pure phase materials. In this study, a phase transition from a microporous MOF, scu-NU-906, to a mesoporous MOF, csq-NU-1008, was discovered and monitored through in situ variable temperature liquid-cell transmission electron microscopy (VT-LCTEM), high-resolution transmission electron microscopy (HRTEM), and in situ variable temperature powder X-ray diffraction (VT-PXRD). Furthermore, it was found that the microporous- to-mesoporous transformation in the presence of formic acid occurs via a concomitant dissolution–reprecipitation process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

How well do one-electron self-interaction-correction methods perform for systems with fractional electrons?

Recently developed locally scaled self-interaction correction (LSIC) is a one-electron SIC method that, when used with a ratio of kinetic energy densities (z σ ) as iso-orbital indicator, performs remarkably well for both thermochemical properties as well as for barrier heights overcoming the paradoxical behavior of the well-known Perdew–Zunger self-interaction correction (PZSIC) method. In this work, we examine how well the LSIC method performs for the delocalization error. Our results show that both LSIC and PZSIC methods correctly describe the dissociation of $H$$^{+}_{2}$ and $H$$^{+}_{2}$ but LSIC is overall more accurate than the PZSIC method. Likewise, in the case of the vertical ionization energy of an ensemble of isolated He atoms, the LSIC and PZSIC methods do not exhibit delocalization errors. For the fractional charges, both LSIC and PZSIC significantly reduce the deviation from linearity in the energy vs number of electrons curve, with PZSIC performing superior for C, Ne, and Ar atoms while for Kr they perform similarly. The LSIC performs well at the endpoints (integer occupations) while substantially reducing the deviation. The dissociation of LiF shows both LSIC and PZSIC dissociate into neutral Li and F but only LSIC exhibits charge transfer from Li + to F – at the expected distance from the experimental data and accurate ab initio data. Overall, both the PZSIC and LSIC methods reduce the delocalization errors substantially.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reconstruction of magnetic island electron temperature in mixed second and third harmonic electron cyclotron emission conditions

Here we develop a method to use the mixed third and second harmonic electron cyclotron emission (ECE) signal in the DIII-D tokamak to reconstruct the electron temperature profile of a rotating magnetic island. The third harmonic ECE is removed by extracting the rotating-island-associated fluctuations in the mixed signal, and the extracted fluctuation is combined with the equilibrium temperature obtained from other diagnostics after correcting for the third harmonic reabsorption. The accuracy of the reconstruction is studied by considering a DIII-D shot where an unmixed signal from an island is available on the low field side of the plasma and a mixed signal from the same island is available from the high field side. It is found that the reconstruction method successfully reproduces the island shape and temperature perturbation magnitude without the distortion caused by third harmonic ECE mixing. However, the radial location of the reconstructed island is somewhat displaced relative to the location of the q = 2 surface in the axisymmetric equilibrium reconstruction, resulting in a corresponding inaccuracy in the absolute temperature of the island. It is conjectured that this may arise from an inaccuracy of the reconstructed axisymmetric equilibrium in this region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Revealing the structure of light pseudoscalar mesons at the electron–ion collider

The questions of how the bulk of the Universe's visible mass emerges and how it is manifest in the existence and properties of hadrons are profound, and probe the heart of strongly interacting matter. Paradoxically, the lightest pseudoscalar mesons appear to be key to a further understanding of the emergent mass and structure mechanisms. These mesons, namely, the pion and kaon, are the Nambu-Goldstone boson modes of quantum chromodynamics (QCD). Unravelling their partonic structure and the interplay between emergent and Higgs-boson mass mechanisms is a common goal of three interdependent approaches - continuum QCD phenomenology, lattice-regularised QCD, and the global analysis of parton distributions - linked to experimental measurements of hadron structure. Experimentally, the anticipated electron-ion collider will enable a revolution in our ability to study pion and kaon structures, accessed by scattering from the 'meson cloud' of the proton through the Sullivan process. With the goal of enabling a suite of measurements that can address these questions, we examine key reactions that identify the critical detector-system requirements needed to map tagged pion and kaon cross-sections over a wide range of kinematics. The excellent prospects for extracting pion structural, functional, and form-factor data are outlined, and similar prospects for kaon structures are discussed in the context of a worldwide programme. Finally, the successful completion of the programme outlined herein will deliver deep, far-reaching insights into the emergence of pions and kaons, their properties, and their role as QCD's Goldstone boson modes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

True molecular conformation and structure determination by three-dimensional electron diffraction of PAH by-products potentially useful for electronic applications

The true mol­ecular conformation and the crystal structure of benzo[e]di­naphtho­[2,3-a;1',2',3',4'-ghi]fluoranthene, 7,14-di­phenyl­naphtho­[1,2,3,4-cde]bis­anthene and 7,16-di­phenyl­naphtho­[1,2,3,4-cde]heli­anthrene were determined ab initio by 3D electron diffraction. All three mol­ecules are remarkable polycyclic aromatic hydro­carbons. The mol­ecular conformation of two of these com­pounds could not be determined via classical spectroscopic methods due to the large size of the mol­ecule and the occurrence of multiple and reciprocally connected aromatic rings. The mol­ecular structure of the third mol­ecule was previously considered provisional. These com­pounds were isolated as by-products in the synthesis of similar products and were at the same time nanocrystalline and available only in very limited amounts. 3D electron diffraction data, taken from submicrometric single crystals, allowed for direct ab initio structure solution and the unbiased determination of the inter­nal mol­ecular conformation. Detailed synthetic routes and spectroscopic analyses are also discussed. Based on many-body perturbation theory simulations, benzo[e]di­naphtho­[2,3-a;1',2',3',4'-ghi]fluoranthene may be a promising candidate for triplet–triplet annihilation and 7,14-di­phenyl­naphtho­[1,2,3,4-cde]bis­anthene may be a promising candidate for inter­molecular singlet fission in the solid state.

36 MATERIALS SCIENCE↗

Power Electronic Development Challenges for High Power Density Integrated Electric Drive Applications

The ever-increasing demand for compact, efficient, and high-performance traction drive systems for transportation applications has accelerated the development of integrated electric drives. In these systems, the electric machine and inverter are integrated within a single housing, offering significant advantages in electrical performance, volume, weight, cost, and overall system efficiency. Despite these benefits, such high levels of integration introduce a new set of challenges, particularly in power electronic design and component selection. This article presents an in-depth investigation of a highly integrated electric drive architecture with an internal stator-mounted inverter, highlighting key design considerations and trade-offs aimed exclusively at maximizing system power density.Based on a comprehensive review of the literature, the power density of a voltage-source-inverter-driven electric drive is primarily governed by the volumetric contributions of the power modules, heat sinks, and DC-link capacitors. Accordingly, this work focuses on the optimization of these three critical components to enhance the inverter's overall power density. The proposed design achieves a power density of 100 kW/L, demonstrating the effectiveness of the presented approach for next-generation integrated electric drive systems.

33 ADVANCED PROPULSION SYSTEMS↗

AlGaN High Electron Mobility Transistor for High-Temperature Logic

Here we report on AlGaN high electron mobility transistor (HEMT)-based logic development, using combined enhancement- and depletion-mode transistors to fabricate inverters with operation from room temperature up to 500°C. Our development approach included: (a) characterizing temperature-dependent carrier transport for different AlGaN HEMT heterostructures, (b) developing a suitable gate metal scheme for use in high temperatures, and (c) over-temperature testing of discrete devices and inverters. Hall mobility data (from 30°C to 500°C) revealed the reference GaN-channel HEMT experienced a 6.9x reduction in mobility, whereas the AlGaN channel HEMTs experienced about a 3.1x reduction. Furthermore, a greater aluminum contrast between the barrier and channel enabled higher carrier densities in the two-dimensional electron gas for all temperatures. The combination of reduced variation in mobility with temperature and high sheet carrier concentration showed that an Al-rich AlGaN-channel HEMT with a high barrier-to-channel aluminum contrast is the best option for an extreme temperature HEMT design. Three gate metal stacks were selected for low resistivity, high melting point, low thermal expansion coefficient, and high expected barrier height. The impact of thermal cycling was examined through electrical characterization of samples measured before and after rapid thermal anneal. The 200-nm tungsten gate metallization was the top performer with minimal reduction in drain current, a slightly positive threshold voltage shift, and about an order of magnitude advantage over the other gates in on-to-off current ratio. After incorporating the tungsten gate metal stack in device fabrication, characterization of transistors and inverters from room temperature up to 500°C was performed. The enhancement-mode (e-mode) devices’ resistance started increasing at about 200°C, resulting in drain current degradation. This phenomenon was not observed in depletion-mode (d-mode) devices but highlights a challenge for inverters in an e-mode driver and d-mode load configuration.

42 ENGINEERING↗

Mediated Inner‐Sphere Electron Transfer Induces Homogeneous Reduction of CO 2 via Through‐Space Electronic Conjugation**

Abstract The electrocatalytic reduction of CO 2 is an appealing method for converting renewable energy sources into value‐added chemical feedstocks. We report a co‐electrocatalytic system for the reduction of CO 2 to CO comprised of a molecular Cr complex and dibenzothiophene‐5,5‐dioxide (DBTD) as a redox mediator, which achieves high activity (TOF=1.51–2.84×10 5 s −1 ) and quantitative selectivity. Under aprotic or protic conditions, DBTD produces a co‐electrocatalytic response with 1 by coordinating trans to the site of CO 2 binding and mediating electron transfer from the electrode with quantitative efficiency for CO. This assembly is reliant on through‐space electronic conjugation between the π frameworks of DBTD and the bpy fragment of the catalyst ligand, with contributions from dispersive interactions and weak sulfone coordination.

Hooe, Shelby L.↗

Mediated Inner–Sphere Electron Transfer Induces Homogeneous Reduction of CO 2 via Through–Space Electronic Conjugation

The electrocatalytic reduction of CO 2 is an appealing method for converting renewable energy sources into value-added chemical feedstocks. We report a co-electrocatalytic system for the reduction of CO 2 to CO comprised of a molecular Cr complex and dibenzothiophene-5,5-dioxide (DBTD) as a redox mediator, which achieves high activity (TOF=1.51–2.84×10 5 s –1 ) and quantitative selectivity. Under aprotic or protic conditions, DBTD produces a co-electrocatalytic response with 1 by coordinating trans to the site of CO 2 binding and mediating electron transfer from the electrode with quantitative efficiency for CO. Furthermore, this assembly is reliant on through-space electronic conjugation between the π frameworks of DBTD and the bpy fragment of the catalyst ligand, with contributions from dispersive interactions and weak sulfone coordination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, Crystal and Electronic Structure of Layered AM Sb Compounds ( A = Rb, Cs; M = Zn, Cd): Synthesis, Crystal and Electronic Structure of Layered AM Sb Compounds ( A = Rb, Cs; M = Zn, Cd)

Synthesis, crystal structure, thermal stability, and electronic band structure of four new metal antimonides AMSb (A = Rb, Cs; M = Zn, Cd) are reported. CsZnSb and RbZnSb crystallize in the hexagonal ZrBeSi structure type, in a P6 3 /mmc space group (no. 194, Z = 2) and unit cell dimensions of a = 4.5588(2)/4.5466(4) Å and c = 11.9246(6)/11.0999(10) Å. CsCdSb and RbCdSb crystallize in the tetragonal PbFCl structure type in a P4/nmm space group (no. 129; Z = 2) and unit cell parameters of a = 4.8884(5)/4.8227(3) Å and c = 8.8897(9)/8.5492(7) Å. All four compounds are air- and water-sensitive and are shown through DSC measurements to decompose between 975 K and 1060 K. Analysis of the calculated electronic band structure shows that the Zn-containing antimonides are topologically trivial narrow bandgap semiconductors, whereas Cd-containing compounds exhibit a band inversion along Γ-Z direction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗