SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
System to improve space communication by refocusing spent electron beams is described. System reduces transverse velocity components in beam and dilutes current densities to acceptable levels. Diagram of principles of operation is included.
Relationships between radiographic quality and nonvacuum electron beam welding procedures
An analysis is conducted of the University of Minnesota Electron Echo experiments, which so far have included five sounding rocket experiments. The concept of the Echo experiment is to inject electron beam pulses from a rocket into the ionosphere at altitudes in the range from 100 to 300 km. The electrons move to the conjugate hemisphere following magnetic field lines and return on neighboring field lines to the neighborhood of the rocket where the pulses may be detected and analyzed. Attention is given to the detection and analysis of echoes, the structure of echoes, and the Echo V experiment. The Echo V experiment showed clearly that detection of remote echo beams by atmospheric fluorescence using low light level TV system is not a viable technique. A future experiment is to use throw-away detectors for direct remote echo detection.
Argon plasma oscillations stimulated by high energy pre-bunched electron beam from linear accelerator
During the third Space Shuttle Columbia flight (STS 3) in March 1982, investigations were conducted to assess the electrical, electromagnetic, and plasma environment of the orbiter and to diagnose wave emissions and related plasma effects due to the injection of an electron beam into the surrounding ionosphere. Attention is given to wave emissions and related plasma processes which were stimulated by the first electron beam emissions from the Space Shuttle. The on-orbit measurements are compared to measurements made in a space simulation chamber. Instrumentation and operations are considered along with the plasma effects of beam emissions, wave emissions from dc beams, wave emissions from VLF-modulated beams, and wave emissions from ELF-modulated beams.
The charging and discharging of a dielectric material which has bulk and surface conductivities is discussed. Two model problems are solved. In the first problem, a semi-infinite dielectric plane, attached to an infinite grounded conducting substrate and exposed to a monoenergetic electron beam, is analyzed. Bulk and surface conductivities and secondary emission characteristics are taken into account as parameters. In the second problem the dielectric is charged but the electron beam is shut off so only the bulk and surface conductivities enter the calculation. The principal result of the latter calculation is to show that steep tangential gradients develop in the presence of a surface conductivity during decay, and that for asymptotic times the temporal behavior, for a fixed position, is proportional to the square root of t rather than exponential, as expected in the presence of a bulk conductivity.
Requirements for advanced aircraft have led to more extensive use of titanium alloys and the resultant search for joining processes which can produce lightweight, high strength airframe structures efficiently. As a result, electron beam welding has been investigated. The following F-14A components are now being EB welded in production and are mainly annealed Ti-6Al-4V except for the upper wing cover which is annealed Ti-6Al-6V-2Sn: F-14A wing center section box, and F-14A lower and upper wing covers joined to wing pivot fitting assemblies. Criteria for selection of welding processes, the EB welding facility, development work on EB welding titanium alloys, and F-14A production and sliding seal electron beam welding are reported.
Manufacturing of structural metal parts directly from computer aided design (CAD) data has been investigated by numerous researchers over the past decade. Researchers at NASA Langley REsearch Center are developing a new solid freeform fabrication process, electron beam freeform fabrication (EBF), as a rapid metal deposition process that works efficiently with a variety of weldable alloys. The EBF process introduces metal wire feedstock into a molten pool that is created and sustained using a focused electron beam in a vacuum environment. Thus far, this technique has been demonstrated on aluminum and titanium alloys of interest for aerospace structural applications nickel and ferrous based alloys are also planned. Deposits resulting from 2219 aluminum demonstrations have exhibited a range of grain morphologies depending upon the deposition parameters. These materials ave exhibited excellent tensile properties comparable to typical handbook data for wrought plate product after post-processing heat treatments. The EBF process is capable of bulk metal deposition at deposition rated in excess of 2500 cubic centimeters per hour (150 cubic inches per our) or finer detail at lower deposition rates, depending upon the desired application. This process offers the potential for rapidly adding structural details to simpler cast or forged structures rather than the conventional approach of machining large volumes of chips to produce a monolithic metallic structure. Selective addition of metal onto simpler blanks of material can have a significant effect on lead time reduction and lower material and machining costs.
Electron beam evaporation of silicon dioxide producing storage layers for automatic picture transmission vidicon, analyzing causes of signal loss after short operating time in flight tubes
Flow visualization via afterglow produced in pure low temperature nitrogen and air by electron beam projection
Electric field meter for ionosphere, using electron beam deflection technique
Spectroscopic analysis of electron beam induced fluorescence in hypersonic helium flow
Electron beam welded hollow balls for high speed ball bearings, comparing fatigue life with solid balls
Electron beam welding of tungsten to tungsten/rhenium and tungsten/rhenium to niobium, discussing techniques for assembly of thermionic converter fuel elements
An electron beam flash evaporation technique is described which reproduces the stoichiometry of superconducting YBa(2)Cu(3)O(x) (123), Bi(2)CaSr(2)Cu(2)O(y) (2122), and Bi(2)Ca(2)Sr(2)Cu(3)O(z) (2223) source powders. Films of each material deposited with this technique exhibit zero resistance temperatures of 78 K or above when furnace annealed; 75 K zero temperatures are obtained for 123 films in situ annealed with atomic oxygen at 775 C. Transport critical current densities are 10,000 A/sq cm in 25-micron stripes patterned from 123 films, and 60,000 A/sq cm in 1-mm stripes of 2122 and 2223 films using a 1-microV/mm measurement criteria. Typical normal state resistivities are 700 micro-ohm cm for 2122 and 2223 films and 5 micro-ohm cm for 123 films. The 2122 films are highly textured with the c axis normal to the substrate. All results are for films deposited on MgO.
The use of high-current short-pulse electron beams in low-density gas flow diagnostics is introduced. Efficient beam propagation is demonstrated for pressure up to 300 microns. The beams, generated by low-pressure pseudospark discharges in helium, provide extremely high fluorescence levels, allowing time-resolved visualization in high-background environments. The fluorescence signal frequency is species-dependent, allowing instantaneous visualization of mixing flowfields.
In this paper the short circuit current Isc induced by the electron beam of a scanning electron microscope in a back surface field solar cell will be determined theoretically. It will be shown that, in a configuration used previously for solar cells with an ohmic back surface, the Isc gives a convenient means for estimating the back surface recombination velocities and thus the quality of back surface field cells. Numerical data will be presented applicable to a point source model for the electron-hole pair generation.
The transient charging and photon emission from the vacuum chamber testing of the Cooperative High Altitude Rocket Gun Experiment are studied. Graphs of the mother-daughter voltage versus time and high time resolution data related to the return current to the vehicle are examined. It is observed that for average sounding rocket densities of 10 to the -6th torr the slope of the voltage rise of the rocket begins to flatten 40 microsec after the onset of electron beam emission, and for higher gas pressure the rocket reaches a maximum voltage of 25 or 30 microsec after the onset of electron beam emission. The data reveal that the return current mechanism for the higher gas pressure is through the sheath.