Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrocatalytic oxidation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

High current density electroreduction of CO 2 into formate with tin oxide nanospheres

In this study, we demonstrate three-dimensional (3D) hollow nanosphere electrocatalysts for CO 2 conversion into formate with excellent H-Cell performance and industrially-relevant current density in a 25 cm 2 membrane electrode assembly electrolyzer device. Varying calcination temperature maximized formate production via optimizing the crystallinity and particle size of the constituent SnO 2 nanoparticles. The best performing SnO 2 nanosphere catalysts contained ~ 7.5 nm nanocrystals and produced 71–81% formate Faradaic efficiency (FE) between -0.9 V and -1.3 V vs. the reversible hydrogen electrode (RHE) at a maximum formate partial current density of 73 ± 2 mA cm geo -2 at -1.3 V vs. RHE. The higher performance of nanosphere catalysts over SnO 2 nanoparticles and commercially-available catalyst could be ascribed to their initial structure providing higher electrochemical surface area and preventing extensive nanocrystal growth during CO 2 reduction. Our results are among the highest performance reported for SnO 2 electrocatalysts in aqueous H-cells. We observed an average 68 ± 8% FE over 35 h of operation with multiple on/off cycles. In situ Raman and time-dependent X-ray diffraction measurements identified metallic Sn as electrocatalytic active sites during long-term operation. Further evaluation in a 25 cm 2 electrolyzer cell demonstrated impressive performance with a sustained current density of 500 mA cm geo -2 and an average 75 ± 6% formate FE over 24 h of operation. Our results provide additional design concepts for boosting the performance of formate-producing catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Construction of Lattice Strain in Bimetallic Nanostructures and Its Effectiveness in Electrochemical Applications

Bimetallic nanocrystals (NCs), associated with various surface functions such as ligand effect, ensemble effect, and strain effect, exhibit superior electrocatalytic properties. The stress-induced surface strain effect can alter binding strength between the surface active sites and reactants as well as their intermediates, and the electrochemical performance of bimetallic NCs can be significantly facilitated by the lattice-strain modification via their morphologies, sizes, shell-thickness, surface defectiveness as well as compositions. Here in this review, an overview of fundamental principles, characterization techniques, and quantitative determination of the surface lattice strain is provided. Various strategies and synthesis efforts on creating lattice-strain-engineered bimetallic NCs, including the de-alloying process, atomic layer-by-layer deposition, thermal treatment evolution, one-pot synthesis, and other efforts are also discussed. It is further outlined how the lattice strain effect promotes electrochemical catalysis through the selected case studies. The reactions on oxygen reduction reaction, small molecular oxidation, water splitting reaction, and electrochemical carbon dioxide reduction reactions are focused. In particular, studies of lattice strain arisen from core–shell nanostructure and defectiveness are highlighted. Lastly, the potential challenges are summarized and the prospects of lattice-strain-based engineering on bimetallic nanocatalysts with suggestion and guidance of the future electrocatalyst design are envisioned.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Electrocatalytic alkene epoxidation at disrupted metal ensembles in blended electrolytes

The project aims to achieve a molecular understanding of oxygen-atom transfer from water to alkenes at electrocatalytic interfaces. Molecular oxygen is the most common oxygen-atom source for epoxidations, and our group is developing sustainable routes through which epoxidation of olefins is achieved using water as the oxygen source. This route can improve the safety of the reaction while also co-producing hydrogen, demonstrating the relevance of this reaction to the energy transition. If successful in our efforts, we may enable oxygen-atom transfer reactions at the anode of water electrolyzers in the place of conventional oxygen evolution, allowing for the synthesis of sustainable value-added co-products. In this vein, we explore several approaches to acquiring high selectivity toward epoxidation over competing reactions, such as oxygen evolution. One of our aims is to allow for rational control of epoxide selectivity by disrupting contiguous metal ensembles at the surface of catalytic metal oxide nanoparticles. Specifically, we aim to synthesize single-atom, few-atom, and many-atom clusters supported on metal oxides and study the mechanism of oxygen evolution and alkene epoxidation on these materials. Thus, this approach will determine the impact of disrupting metal ensembles on the selectivity for alkene epoxidation versus oxygen evolution in blended electrolytes. Another aim is to develop a molecular-level understanding of how a blended electrolyte (i.e., a mixture of aqueous and organic solvents) influences rates of alkene epoxidation versus oxygen evolution. In other words, we are interested in understanding the catalytic influence of the solvent, as our preliminary work shows that the selectivity and reactivity of epoxidation depend strongly on the solvent composition. This investigation includes blended electrolytes and electrolytes containing redox mediator species that improve selectivity toward the desired epoxidation reaction. Overall, our proposed work will help to provide a detailed molecular-level picture of how solvents interact with substrates at the electrode-electrolyte interface, including their involvement in proton transfer reactions and screening of electric fields.

14 SOLAR ENERGY↗
DOE OSTI2022

Electrocatalytic decarboxylation of carboxylic acids over RuO 2 and Pt nanoparticles

Here, we report electrocatalytic decarboxylation (ECDX) of valeric acid into paraffins, olefins, and alcohols via (non-)Kolbe electrolysis on electrodes with RuO 2 and Pt nanoparticles (NPs) as a greener alternative to thermocatalytic decarboxylation. The turnover frequency of ECDX increases, while the specific activity peaks as RuO 2 NP size increases. These opposing trends make the particle size of ∼ 12 nm the optimum size for ECDX on RuO 2 . Bulk Pt was active for ECDX, while Pt NPs were only active for the oxygen evolution reaction under our conditions. ECDX current efficiency remained constant in the studied potential range on RuO 2 NPs. Esterification was the favored reaction at 2.5 V vs. RHE; however, Kolbe electrolysis was the favored reaction at the expense of the esterification at 4.5 V vs. RHE. This work highlights the performance of nanostructured materials as an alternative to bulk materials as anodes for oxidative upgrading of carboxylic acids.

Kolbe electrolysis↗
DOE OSTI2024

A Straightforward Model for Quantifying Local pH Gradients Governing the Oxygen Evolution Reaction

The production and consumption of protons by an electrocatalyst will, under certain conditions, generate localized microenvironments with properties distinct from those of the bulk solution. These local properties are particularly impactful for reactions involving proton-coupled electron transfer, where the generation of locally basic or acidic environments may significantly influence the energy efficiency and reaction selectivity of the electrocatalyst. Whereas local pH environments have been observed and characterized in reductive half-reactions, including the CO 2 reduction and hydrogen evolution reactions, the incompatibility of conventional techniques and materials has limited studies in oxidative half-reactions, including the oxygen evolution reaction (OER), which provides the reducing equivalents for solar-to-fuels electrolysis. With the straightforward parameters bulk pH, buffer composition and pK a , and mass transport, we develop a model for describing local pH as a function of current density regardless of the microscopic details of the mechanism. Using an acid-stable PbO x OER catalyst, we observe the formation and dissipation of pH gradients during the OER and validate the model with voltammetric and potentiometric studies. Here, the model predicts how local acidic environments can develop over a narrow OER current density window, thus providing further motivation for the development of OER catalysts that are stable to acid, even when operating in basic aqueous conditions. More generally, the model is not restricted to the OER and is useful for determining the onset of local pH gradients for other electrocatalytic reactions that involve the consumption or generation of protons in energy conversion reactions.

Anions↗
DOE OSTI2023

Synthesis and Surface Attachment of Molecular Re(I) Complexes Supported by Functionalized Bipyridyl Ligands

Eleven 2,2'-bipyridine (bpy) ligands functionalized with attachment groups for covalent immobilization on silicon surfaces were prepared. Five of the ligands feature silatrane functional groups for attachment to metal oxide coatings on the silicon surfaces, while six contain either alkene or alkyne functional groups for attachment to hydrogen-terminated silicon surfaces. The bpy ligands were coordinated to Re(CO) 5 Cl to form complexes of the type Re(bpy)(CO) 3 Cl, which are related to known catalysts for CO 2 reduction. Six of the new complexes were characterized using X-ray crystallography. As proof of principle, four molecular Re complexes were immobilized on either a thin layer of TiO 2 on silicon or hydrogen-terminated silicon. The surface-immobilized complexes were characterized using X-ray photoelectron spectroscopy, IR spectroscopy, and cyclic voltammetry (CV) in the dark and for one representative example in the light. The CO stretching frequencies of the attached complexes were similar to those of the pure molecular complexes, but the CVs were less analogous. For two of the complexes, comparison of the electrocatalytic CO 2 reduction performance showed lower CO Faradaic efficiencies for the immobilized complexes than the same complex in solution under similar conditions. In particular, a complex containing a silatrane linked to bpy with an amide linker showed poor catalytic performance and control experiments suggest that amide linkers in conjugation with a redox-active ligand are not stable under highly reducing conditions and alkyl linkers are more stable. So a conclusion of this work is that understanding the behavior of molecular Re catalysts attached to semiconducting silicon is more complicated than related complexes, which have previously been immobilized on metallic electrodes.

14 SOLAR ENERGY↗
DOE OSTI2022

Elucidating facet dependent electronic and electrochemical properties of Cu 2 O nanocrystals using AFM/SCEM and DFT

Cuprous oxide (Cu 2 O) has extensively been studied owing to its excellent optical, magnetic, and catalytic properties. Many of these properties are facet-dependent and have not been well elucidated. This work synthesized cubic, cuboctahedral, octahedral, and rhombic dodecahedral shaped Cu 2 O nanocrystals of ~300 nm in size to evaluate the facet-dependent electrochemical activities. Here, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were firstly used to reveal the average electrochemical activities at the ensemble level. Atomic force microscopy-scanning electrochemical microscopy (AFM-SECM) was further used to assess the electrochemical activities of different Cu 2 O nanocrystals at the facet level. Hexaammineruthenium (III) chloride ({Ru(NH 3 ) 6 }Cl 3 ) was employed as the probe molecules that reacted with four different Cu 2 O nanocrystals under —400mV and yielded ~300 pA current between the probing tip and the nanocrystal surface. The tip-current mapping results indicate that rhombic dodecahedral Cu 2 O exhibits higher electrocatalytic activity than other shaped Cu 2 O, due to the presence of dominant exposed facet of {110} as indicated by the relatively high tip current. Density-functional theory (DFT) calculations confirmed the facet dependence of local surface energy and electronic structure of Cu 2 O nanocrystals. Besides electrochemical activity, the surface work function and adsorptive properties were both observed to vary with the shape and dominant exposed facets of Cu 2 O. This study presented a unique experimental and computational chemistry approach to analyze surface electrochemical properties of Cu 2 O crystals at a crystalline facet level.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Boosting the performance of reversible solid oxide electrochemical cells with a novel hybrid oxygen electrode, Pr 1.39 Ba 0.14 Sr 0.53 Co 1.48 Fe 0.76 O 6- δ -Ba 0.66 Sr 0.34 CoO 3- δ

Solid oxide electrochemical cells (SOECs) stand out as a highly promising clean energy technology that offers several benefits, showing significant potential to play a pivotal role in the transition towards a sustainable and low-carbon energy future. SOECs can efficiently convert the chemical energy stored in fuels to electricity in fuel cell mode, and produce various chemicals from abundant feedstocks (e.g., CO 2 , H 2 O) and intermittent solar/wind-based renewable electricity. Despite extensive efforts that have been devoted to designing novel materials and optimizing SOEC manufacturing processes, aiming to achieve enhanced energy efficiency, the current SOECs still suffer from poor performance, which is mainly due to the sluggish oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) kinetics. To address this challenge, in this work, we have successfully designed an in situ formed hybrid oxygen electrode material (Pr 1.39 Ba 0.14 Sr 0.53 Co 1.48 Fe 0.76 O 6- δ -Ba 0.66 Sr 0.34 CoO 3- δ ), which significantly improves the surface oxygen exchange coefficient and bulk oxygen-ion diffusion coefficient, enhancing the OER and ORR electrocatalytic activities. Further, the SOECs equipped with this newly developed oxygen electrode achieved exceptional performance for power generation using both hydrogen and propane as the fuels. At 750 °C, a peak power density of 2.4 W cm -2 was obtained with H 2 as the fuel. Additionally, the SOECs attain unprecedented performance in steam electrolysis mode. A current density of 4.4 A cm -2 was achieved at 1.3 V and 750 °C, which represents the highest performance among all yttria-stabilized zirconia (YSZ) electrolyte-based SOECs. The SOECs also deliver remarkable stability during the accelerated stability testing, highlighting the great potential of Pr 1.39 Ba 0.14 Sr 0.53 Co 1.48 Fe 0.76 O 6- δ -Ba 0.66 Sr 0.34 CoO 3- δ as a high-performance oxygen electrode for next generation SOECs.

08 HYDROGEN↗
DOE OSTI2026

Morphology-driven oxygen evolution performance of NiO x nanostructures and implications for hole transport in perovskite solar cells

Morphology-controlled nanostructures provide an effective strategy to modulate both oxygen evolution reaction (OER) activity and photovoltaic performance in perovskite solar cells (PSCs). However, achieving low OER overpotentials and high power conversion efficiency (PCE) simultaneously through morphology engineering remains challenging. In this work, nickel oxide (NiO x ) nanostructures with spindle-like (NiO x -NS) and plate-like (NiO x -NP) morphologies were synthesized and evaluated as bi-functional OER catalysts and hole transport layers (HTLs) in inverted PSCs. Structural and thermal analyses reveal that NiO x -NS crystallizes into a cubic phase at a lower temperature (300 °C), whereas NiO x -NP requires higher calcination temperatures, reflecting differences in precursor microstructure. Electrochemical measurements indicate that NiO x -NS calcined at 300 °C delivers the lowest OER overpotential (395 mV at 10 mA cm −2 ), outperforming NiO x -NP calcined at 400 °C (565 mV) and 500 °C (474 mV). This enhanced activity is ascribed to favorable surface strain, increased defect density, and advantageous facet exposure. When used as HTLs, NiO x -NS also delivers the highest PCE (13.25%) among all tested devices, exceeding those based on NiO x -NP and commercial NiO x , owing to improved hole extraction and interfacial contact. Overall, this study highlights the importance of morphology control and thermal processing in tailoring NiO x for multifunctional nanomaterials in electrocatalytic and photovoltaic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The Influence of Transitional Metal Dopants on Reducing Chlorine Evolution during the Electrolysis of Raw Seawater

Electrocatalytic water splitting is a possible route to the expanded generation of green hydrogen; however, a long-term challenge is the requirement of fresh water as an electrolyzer feed. The use of seawater as a direct feed for electrolytic hydrogen production would alleviate fresh water needs and potentially open an avenue for locally generated hydrogen from marine hydrokinetic or off-shore power sources. One environmental limitation to seawater electrolysis is the generation of chlorine as a competitive anodic reaction. This work evaluates transition metal (W, Co, Fe, Sn, and Ru) doping of Mn-Mo-based catalysts as a strategy to suppress chlorine evolution while sustaining catalytic efficiency. Electrochemical evaluations in neutral chloride solution and raw seawater showed the promise of a novel Mn-Mo-Ru electrode system for oxygen evolution efficiency and enhanced catalytic activity. Subsequent stability testing in a flowing raw seawater flume highlighted the need for improved catalyst stability for long-term applications of Mn-Mo-Ru catalysts. This work highlights that elements known to be selective toward chlorine evolution in simple oxide form (e.g., RuO2) may display different trends in selectivity when used as isolated dopants, where Ru suppressed chlorine evolution in Mn-based catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Defect-Engineered High-Entropy Spinel Oxide@Onion-Like Carbon Catalysts for High-Areal-Energy Rechargeable Zinc–Air Batteries

Rechargeable zinc-air batteries (ReZAB) have emerged as the next-generation batteries with several advantages over the conventional lithium-ion battery. In this work, single nanocrystals of inverse-type high-entropy spinel oxides (HESOx, particle size of 10−12 nm) confined in highly curved defective onion-like carbons (HESOx/OLC AT ) as efficient electrocatalysts for oxygen evolution reaction (OER), oxygen reduction reaction (ORR), and ReZAB, have been synthesized. The HESOx materials were thoroughly characterized using several analytical techniques, including X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning transmission electron microscopy (STEM), Raman, and electron paramagnetic resonance (EPR). HESOx/OLC AT catalyst was tested for ReZAB using literature-recommended parameters that would allow for real technological application. These parameters include a current loading of 10 mA cm −2 and a discharge areal energy density of 35 mWh cm geometric −2 , which maps a Li-ion battery pack-level specific energy of 120 Wh kg pack −1 . HESOx/OLC AT electrocatalysts allowed for continuous discharging and charging at a current loading of 10 mA cm −2 with discharge areal energy densities between 37 and 74 mWh cm geometric −2 , thus outperforming the recommended threshold of 35 mWh cm geometric −2 . Considering that most studies (>90%) hardly meet the recommended threshold for technological application of ReZAB, the present work represents one of the top-performing electrocatalysts for ReZAB. The excellent electrocatalytic properties of defect-rich HESOx/OLC AT toward ORR/OER and ReZAB are governed by the strong electronic modulation arising from d-π hybridization, the availability of multiple catalytic sites for intermediates, and weakened d-band centers of the rate-determining intermediates (i.e., *O adsorption for ORR and *OOH formation for OER) compared to the pristine HESOx. This work introduces an effective approach for the design and synthesis of single nanocrystals of high-entropy electrocatalysts for the development of low-cost, robust, and technologically relevant rechargeable zinc−air batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

Carbon Free and Noble Metal Free Ni 2 Mo 6 S 8 Electrocatalyst for Selective Electrosynthesis of H 2 O 2

Electrocatalytic two-electron reduction of oxygen is a promising method for producing sustainable H 2 O 2 but lacks low-cost and selective electrocatalysts. Here, the Chevrel phase chalcogenide Ni 2 Mo 6 S 8 is presented as a novel active motif for reducing oxygen to H 2 O 2 in an aqueous electrolyte. Although it has a low surface area, the Ni 2 Mo 6 S 8 catalyst exhibits exceptional activity for H 2 O 2 synthesis with >90% H 2 O 2 molar selectivity across a wide potential range. Chemical titration verified successful generation of H 2 O 2 and confirmed rates as high as 90 mmol H 2 O 2 g cat –1 h –1 . The outstanding activities are attributed to the ligand and ensemble effects of Ni that promote H 2 O dissociation and proton-coupled reduction of O 2 to HOO*, and the spatial effect of the Chevrel phase structure that isolates Ni active sites to inhibit O—O cleavage. The synergy of these effects delivers fast and selective production of H 2 O 2 with high turn-over frequencies of ≈30 s –1 . Additionally, the Ni 2 Mo 6 S 8 catalyst has a stable crystal structure that is resistive for oxidation and delivers good catalyst stability for continuous H 2 O 2 production. The described Ni-Mo6S8 active motif can unlock new opportunities for designing Earth-abundant electrocatalysts to tune oxygen reduction for practical H 2 O 2 production.

36 MATERIALS SCIENCE↗
DOE OSTI2020

LixNiO/Ni Heterostructure with Strong Basic Lattice Oxygen Enables Electrocatalytic Hydrogen Evolution with Pt-like Activity

The low-cost hydrogen production from water electrolysis is crucial for practical deployment of sustainable hydrogen economy, but is often constrained by the lack of active and robust electrocatalysts from Earth-abundant materials. We describe here an unconventional heterostructure composed of strongly coupled Ni-deficient LixNiO nanoclusters and polycrystalline Ni nanocrystals, and its exceptional activities toward hydrogen evolution reaction (HER) in aqueous electrolytes. The presence of unique lattice oxygen species with strong Brønsted basicity is a significant feature, which spontaneously split water molecules and effectively accelerate the sluggish Volmer H-OH dissociation step in neutral and alkaline HER. In combination with the unpreceded level of intimate LixNiO and Ni interfacial junctions that produces abundant “hotspots” for promoted hydride coupling, the catalyst exhibited kinetic activities almost identical as Pt/C and decent long term stability in universal pH.

Lu, Ke↗
DOE OSTI2024

Unveiling the Role of Surface Ir-Oxo Species in O 2 Evolution at IrO 2 Electrocatalysts via Embedded Cluster Multireference Calculations

Understanding the mechanisms driving the oxygen evolution reaction (OER) on iridium oxide (IrO 2 )-based catalysts is essential to improving their performance and enabling an actual scale-up of water-splitting photoelectrochemical cells. The mechanistic pathways at IrO 2 interfaces have been extensively investigated computationally using density functional theory (DFT), which predicts a high-energy barrier for the last step of the OER of molecular oxygen detachment and release from the catalyst surface. Nevertheless, surface O 2 over- and under-binding results by standard generalized gradient approximation and hybrid density functionals, respectively, call for further analysis of this crucial step via multireference methods. Aiming at unveiling the nature of such a barrier, we hereby address the formation of O 2 from the most-stable IrO 2 (110) surface with both periodic DFT and an electrostatic embedded cluster approach at the n-electron valence-state perturbation theory. With this multireference approach, we find a value for the aforementioned energy barrier that is much closer to experimental indications than DFT ones. Here, an in-depth analysis of the involved molecular orbitals suggests that the origin of this barrier is related to the breaking of a π interaction between O 2 and Ir surface atom and to a significant additional O 2 interaction with adjacent electrophilic Ir-oxo species, which is present under experimental operating conditions. Besides shedding light on the mechanism of the OER on IrO 2 , these findings point out the importance of multireference methods for dissecting complex reactions at electrocatalytic interfaces and pave the route for further investigations with effective embedding approaches.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Synthetic Access to a Framework-Stabilized and Fully Sulfided Analogue of an Anderson Polyoxometalate that is Catalytically Competent for Reduction Reactions

Polyoxometalates (POMs) featuring 7, 12, 18, or more redox-accessible transition metal ions are ubiquitous as selective catalysts, especially for oxidation reactions. The corresponding synthetic and catalytic chemistry of stable, discrete, capping-ligand-free polythiometalates (PTMs), which could be especially attractive for reduction reactions, is much less well developed. Among the challenges are the propensity of PTMs to agglomerate and the tendency for agglomeration to block reactant access of catalyst active sites. Nevertheless, the pervasive presence of transition metal sulfur clusters metalloenzymes or cofactors that catalyze reduction reactions and the justifiable proliferation of studies of two-dimensional (2D) metal-chalcogenides as reduction catalysts point to the promise of well-defined and controllable PTMs as reduction catalysts. Here, we report the fabrication of agglomeration-immune, reactant-accessible, capping-ligand-free Co II Mo 6 IV S 24 n– clusters as periodic arrays in a water-stable, hierarchically porous Zr-metal–organic framework (MOF; NU1K) by first installing a disk-like Anderson polyoxometalate, Co III Mo 6 VI O 24 m– , in size-matched micropores where the siting is established via difference electron density (DED) X-ray diffraction (XRD) experiments. Flowing H 2 S, while heating, reduces molybdenum(VI) ions to Mo(IV) and quantitatively replaces oxygen anions with sulfur anions (S 2– , HS – , S 2 2– ). DED maps show that MOF-templated POM-to-PTM conversion leaves clusters individually isolated in open-channel-connected micropores. Importantly, the structure of the immobilized cluster as determined, in part, by X-ray photoelectron spectroscopy (XPS), X-ray absorption fine structure (XAFS) analysis, and pair distribution function (PDF) analysis of total X-ray scattering agrees well with the theoretically simulated structure. PTM@MOF displays both electrocatalytic and photocatalytic competency for hydrogen evolution. Nevertheless, the initially installed PTM appears to be a precatalyst, gaining competency only after the loss of ~3 to 6 sulfurs and exposure to hydride-forming metal ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

(Photo)Electrocatalytic CO 2 Reduction at the Defective Anatase TiO 2 (101) Surface

Excessive carbon dioxide (CO 2 ) emissions by combustion of fossil fuels are linked to global warming and rapid climate change. One promising route to lowering the concentration of CO 2 in the atmosphere is to reduce it to useful small molecules via photoelectrocatalytic hydrogenation, which would enable solar energy storage with a zero-carbon emission cycle and perform a more efficient separation of the photogenerated electron and hole pair than pure photocatalysis. Indeed, photoelectrocatalytic CO 2 reduction has been an intense focus of research. Using the density functional theory (DFT), we studied the CO 2 reduction reaction on the defective anatase TiO 2 (101) surface, at both the solvent/catalyst and the electrolyte/catalyst interfaces. The analysis of the electronic structure of the surface shows a contrast between the solvent/catalyst and the electrolyte/catalyst interfaces, which results in the two corresponding catalytic cycles being distinct. Furthermore, our study explains at the electronic and mechanistic levels why methanol is the main product in the presence of the electrolyte and why the overpotential is not only controlled by the reaction process but also by the diffusion process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Cobalt(II) Phthalocyanine Substituents Tune the Electrocatalytic CO 2 Conversion to Methanol

Cobalt phthalocyanine (Co(II)Pc) and its derivatives are promising molecular electrocatalysts for the electrochemical reduction of CO 2 to CO and methanol (CH 3 OH). Despite increasing interest, a detailed mechanistic understanding of how ligand substituents influence catalytic activity, selectivity, and efficiency remains limited. In this study, we employ density functional theory (DFT) to systematically investigate the influence of electron-donating groups (EDGs) and electron-withdrawing groups (EWGs) on the electronic structure and redox properties of the Co(II)Pc electrocatalyst, and to elucidate CO 2 RR mechanistic pathways. Our results reveal that EWGs cause a positive shift in the reduction potentials, favor CO 2 binding over protonation of the Co metal center and promote downstream methanol formation at mild potentials. EDGs show opposite trends including favorable protonation steps, promoting a negative shift in the reduction potential, and facilitating the hydrogen evolution reaction (HER), which competes with the desired CO 2 RR pathway. Notably, CO dissociation is thermodynamically and kinetically unfavorable across all systems, positioning the redox potential versus CO dissociation energy as a key factor for methanol selectivity. Furthermore, these insights provide a predictive framework for rational catalyst design and underscore the critical role of electronic tuning in advancing molecular electrocatalysts for sustainable CO 2 conversion.

Alcohols↗
DOE OSTI2026

Alkali Cation-Mediated Modulation of CO 2 Reduction Activity on Tin Electrodes in [EMIM][BF 4 ]/H 2 O Electrolytes

The development of efficient CO 2 reduction technologies hinges upon a thorough understanding of the intricate interplay between solution cations and the characteristics of the electrode surface. Recently, ionic liquids (ILs) have emerged as promising electrolytes for the CO 2 reduction reaction. However, the effect of alkali cations on the electrochemical CO 2 reduction (CO 2 R) reaction remains unclear in ILs. Here, in this report, we studied alkali cation effects by assessing the electrocatalytic CO 2 R activity with the IL 1-ethyl-3-methylimidazolium tetrafluoroborate, [EMIM][BF 4 ], in water with alkali metal co-cations (i.e., Li + , Na + , and K + ) using a polycrystalline Sn catalyst. Contrary to previous findings in purely aqueous media with inorganic cations, where alkali cations strongly enhance CO 2 R via pH modulation and strengthening of interfacial electric fields, alkali cations in electrolytes containing the IL [EMIM][BF4] negatively impact CO 2 R activity on Sn electrodes. These results were attributed to the larger radius and higher concentration of the IL organic cation [EMIM] + that mitigates the impact of alkali cations. These findings highlight the complex interplay between IL cations and alkali metals in shaping CO 2 R performance.

Chemistry↗