Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrical double layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Measurement of volt/meter vertical electric fields in the middle atmosphere

A test flight for a series of middle atmosphere electrodynamics rockets was launched from Wallops Island, Virginia, at 7:18 EST on July 31, 1980. The mother-daughter configuration contained a three axis symmetric double probe electric field instrument and a blunt probe on the daughter payload, and a Gerdien condenser and a single axis (vertical) asymmetric double probe electric field instrument on the mother payload. The payloads reached an apogee of 111 km, and data were gathered from all instruments on the downleg. A downward vertical electric field with a maximum amplitude of about 4 V/m was observed in a layer between about 57 and 67 km. The integrated potential across this layer was approximately 20 kV. Conductivity measurements indicated that free electrons were absent from the region of large electric fields; however, the decrease in conductivity was insufficient to maintain vertical current continuity through the layer. These results establish the existence of large mesospheric electric fields, supporting previous results from single axis measurements.

Maynard, N. C.↗
NASA NTRS1983

The plasmaspheric electric field as measured by ISEE 1

The electrodynamics of the plasmasphere has been a topic of considerable interest. Models predict a space charge buildup, or Alfven layer, at the inner edge of the ring current which opposes the dawn-dusk convection electric field in the magnetosphere and thus shields the plasmasphere from the convection electric field. The current study has the objective to present data from the ISEE 1 double cylindrical probe instrument. All measurements reported were made in the plasmasphere with electron densities of the order of 30-50 or greater per cu cm. The average electric field pattern for quiet conditions is found to be qualitatively consistent with previous average results from whistler measurements and radar backscattering measurements. The magnitudes and gross patterns are in qualitative agreement with representative ionospheric dynamo models. The basic convective flow vectors from the penetration of the magnetospheric electric field tend to follow contours which are parallel to those of the average plasmapause boundary on the nightside.

Maynard, N. C.↗
NASA NTRS2005

Energetic ion production and electrode erosion in hollow cathode discharges

Ions with energies significantly in excess of the discharge voltage have been reported in high current hollow cathode discharges. Models of DC potential hills downstream of the cathode and ion acoustic instabilities in a double layer postulated in the cathode orifice have been proposed to explain these energetic ions, but have not been substantiated in experiments.

ion thruster↗
DOE OSTI2021

A Double-side Cooled SiC MOSFET Power Module with Sintered-silver Interposers: I. Design, Simulation, Fabrication, and Performance Characterization

Planar, double-side cooled power modules are emerging in electric-drive inverters because of their low profile, better heat extraction, and lower package parasitic inductances. However, there is still concern about their reliability due to the rigid interconnection between the device chips and two substrates of the power module. In this paper, a porous interposer made of low-temperature sintered silver is introduced to reduce the thermo-mechanical stresses in the module. A double-side cooled half-bridge module consisting of two 1200 V, 149 A SiC MOSFETs was designed, fabricated, and characterized. By using the sintered-Ag instead of solid copper interposers, our simulation results showed that at a total power loss of 200 W, the thermo-mechanical stress at the most vulnerable interfaces (interposer-attach layer) was reduced by 42 % and in the SiC MOSFET by 50 % with a trade-off of only 3.6 % increase in junction temperature. The sintered-Ag interposers were readily fabricated into desired dimensions without post-machining and did not require any surface finishing for die-bonding and substrate interconnection by silver sintering. Here, the porous interposers were also deformable under a low force or pressure, which helped to accommodate chip thickness and/or substrate-to-substrate gap variations in the planar module structure, thus simplifying module fabrication. Experimental results on the electrical performance of the fabricated SiC modules validated the success of using the porous silver interposers for fabricating planar, double-side cooled power modules.

42 ENGINEERING↗
DOE OSTI2024

Electrochemical Capacitance Traces with Interlayer Spacing in Two‐dimensional Conductive Metal–Organic Frameworks

Abstract Electrically conductive metal–organic frameworks (MOFs) are promising candidates for electrochemical capacitors (EC) for fast energy storage due to their high specific surface areas and potential for redox activity. To maximize energy density, traditional inorganic pseudocapacitors have utilized faradaic processes in addition to double‐layer capacitance. Although conductive MOFs are usually comprised of redox active ligands which allow faradaic reactions upon electrochemical polarization, systematic studies providing deeper understanding of the charge storage processes and structure‐function relationships have been scarce. Here, we investigate the charge storage mechanisms of a series of triazatruxene‐based 2D layered conductive MOFs with variable alkyl functional groups, Ni 3 (HIR 3 ‐TAT) 2 (TAT=triazatruxene; R=H, Et, n ‐Bu, n ‐Pent). Functionalization of the triazatruxene core allows for systematic variation of structural parameters while maintaining in‐plane conjugation between ligands and metals. Specifically, R groups modulate interlayer spacing, which in turn shifts the charge storage mechanism from double‐layer capacitance towards pseudocapacitance, leading to an increase in molar specific capacitance from Ni 3 (HIH 3 ‐TAT) 2 to Ni 3 (HIBu 3 ‐TAT) 2 . Partial exfoliation of Ni 3 (HIBu 3 ‐TAT) 2 renders redox active ligand moieties more accessible, and thus increases the dominance of faradaic processes. Our strategy of controlling charge storage mechanism through tuning the accessibility of redox‐active sites may motivate further design and engineering of electrode materials for EC.

Su, Alice Y.↗
DOE OSTI2024

Electrochemical Capacitance Traces with Interlayer Spacing in Two‐dimensional Conductive Metal–Organic Frameworks

Abstract Electrically conductive metal–organic frameworks (MOFs) are promising candidates for electrochemical capacitors (EC) for fast energy storage due to their high specific surface areas and potential for redox activity. To maximize energy density, traditional inorganic pseudocapacitors have utilized faradaic processes in addition to double‐layer capacitance. Although conductive MOFs are usually comprised of redox active ligands which allow faradaic reactions upon electrochemical polarization, systematic studies providing deeper understanding of the charge storage processes and structure‐function relationships have been scarce. Here, we investigate the charge storage mechanisms of a series of triazatruxene‐based 2D layered conductive MOFs with variable alkyl functional groups, Ni 3 (HIR 3 ‐TAT) 2 (TAT=triazatruxene; R=H, Et, n ‐Bu, n ‐Pent). Functionalization of the triazatruxene core allows for systematic variation of structural parameters while maintaining in‐plane conjugation between ligands and metals. Specifically, R groups modulate interlayer spacing, which in turn shifts the charge storage mechanism from double‐layer capacitance towards pseudocapacitance, leading to an increase in molar specific capacitance from Ni 3 (HIH 3 ‐TAT) 2 to Ni 3 (HIBu 3 ‐TAT) 2 . Partial exfoliation of Ni 3 (HIBu 3 ‐TAT) 2 renders redox active ligand moieties more accessible, and thus increases the dominance of faradaic processes. Our strategy of controlling charge storage mechanism through tuning the accessibility of redox‐active sites may motivate further design and engineering of electrode materials for EC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Reducing Surface Recombination Velocity of Methylammonium-Free Mixed-Cation Mixed-Halide Perovskites via Surface Passivation

We control surface recombination in the mixed-cation, mixed-halide perovskite, FA0.83Cs0.17Pb(I0.85Br0.15)3, by passivating nonradiative defects with the polymerizable Lewis base (3-aminopropyl)trimethoxysilane (APTMS). We demonstrate average minority carrier lifetimes >4 µs, nearly single exponential monomolecular photoluminescence decays, and high external photoluminescence quantum efficiencies (>20%, corresponding to ~97% of the maximum theoretical quasi-Fermi-level splitting) at low excitation fluence. We confirm both the composition and valence band edge position of the FA0.83Cs0.17Pb(I0.85Br0.15)3 perovskite using multi-institutional, cross-validated, X-ray photoelectron spectroscopy and UV photoelectron spectroscopy measurements. We extend the APTMS surface passivation to higher bandgap double-cation (FA and Cs) compositions (1.7, 1.75, and 1.8 eV) as well as the widely used triple-cation (FA, MA, and Cs) composition. Finally, we demonstrate that the average surface recombination velocity decreases from ~1000 to ~10 cm/s post APTMS passivation for FA0.83Cs0.17Pb(I0.85Br0.15)3. Our results demonstrate that surface-mediated recombination is the primary nonradiative loss pathway in many methylammonium (MA)-free mixed-cation mixed-halide films with a range of different bandgaps, which is a problem observed for a wide range of perovskite active layers and reactive electrical contacts. Our study also provides insights to develop passivating molecules that help reduce surface recombination in MA-free mixed-cation mixed-halide films and indicates that surface passivation and contact engineering will enable near-theoretical device efficiencies with these materials.

14 SOLAR ENERGY↗
DOE OSTI2022

Layer pseudospin magnetism in a transition metal dichalcogenide double-moiré system

Spontaneous order of layer pseudospins in two-dimensional bilayers is common in quantum Hall systems, where it is responsible for hysteretic responses to gate fields in states with Ising order and giant drag voltages in states with XY (spontaneous interlayer phase coherence) order. In this article we predict that layer pseudospin order will also occur in double-moiré strongly correlated two-dimensional electron systems. Here, we comment on similarities and differences in the competition between the two types of order in quantum Hall and double-moiré systems, and relate our findings to previous work on Falicov-Kimball models of electronic ferroelectrics.

36 MATERIALS SCIENCE↗
NASA NTRS1981

Physics of auroral arc formation; Proceedings of the Chapman Conference on Formation of Auroral Arcs, Fairbanks, AK, July 21-25, 1980

The results of satellite, balloon-borne, and ground-based observations of auroral phenomena are discussed in terms of the morphology of auroral arcs and the behavior and characteristics of auroral electrons and ions. Further attention is given to auroral electric fields and field aligned currents, and to the development of models of auroral potential structures and energization of auroral particles. A simulation of space plasma phenomena is presented, along with numerical simulations of auroral potential structures and related phenomena, including the V-potential double layers and auroral arc deformations, and a simulation of auroral arcs. Plasma waves observed on auroral field lines and in laboratory conditions are reported, and theoretical studies of waves and turbulence in auroral plasmas are described.

Akasofu, S.-I.↗
NASA NTRS1992

The growth and characterization of Al(x)Ga(1-x)As/Ge heterostructures

The effects of the growth temperature and the Al(x)Ga(1-x)As layer thickness on the structural, optical, and electrical properties of Al(x)Ga(1-x)As/Ge heterostructures grown for photovoltaic applications were investigated using different-thickness (between 1 micron and 5 microns) Al(x)Ga(1-x)As layers grown by MOCVD in the temperature range between 660 and 780 C. Results obtained from double-crystal X-ray rocking curve measurements, electron beam induced current, cross-sectional TEM, Raman spectroscopy, SIMS, and steady-state and time-resolved photoluminescence measurements are presented. It was found that the highest minority carrier lifetime, 2.41 ns, was obtained for T(G) = 780 C, but the lowest interfacial recombination velocity, 1.6 x 10 exp 4, was obtained at 660 C.

Choi, S. W.↗
NASA NTRS2016

Magnetospheric Multiscale Satellites Observations of Parallel Electric Fields Associated with Magnetic Reconnection

We report observations from the Magnetospheric Multiscale satellites of parallel electric fields (E (sub parallel)) associated with magnetic reconnection in the subsolar region of the Earth's magnetopause. E (sub parallel) events near the electron diffusion region have amplitudes on the order of 100 millivolts per meter, which are significantly larger than those predicted for an antiparallel reconnection electric field. This Letter addresses specific types of E (sub parallel) events, which appear as large-amplitude, near unipolar spikes that are associated with tangled, reconnected magnetic fields. These E (sub parallel) events are primarily in or near a current layer near the separatrix and are interpreted to be double layers that may be responsible for secondary reconnection in tangled magnetic fields or flux ropes. These results are telling of the three-dimensional nature of magnetopause reconnection and indicate that magnetopause reconnection may be often patchy and/or drive turbulence along the separatrix that results in flux ropes and/or tangled magnetic fields.

Ergun, R. E.↗
NASA NTRS1991

Thermal performance of a liquid hydrogen tank multilayer insulation system at warm boundary temperatures of 630, 530, and 152 R

The results are presented of a study conducted to obtain experimental heat transfer data on a liquid hydrogen tank insulated with 34 layers of MLI (multilayer insulation) for warm side boundary temperatures of 630, 530, and 150 R. The MLI system consisted of two blankets, each blanket made up of alternate layers of double silk net (16 layers) and double aluminized Mylar radiation shields (15 layers) contained between two cover sheets of Dacron scrim reinforced Mylar. The insulation system was designed for and installed on a 87.6 in diameter liquid hydrogen tank. Nominal layer density of the insulation blankets is 45 layers/in. The insulation system contained penetrations for structural support, plumbing, and electrical wiring that would be representative of a cryogenic spacecraft. The total steady state heat transfer rates into the test tank for shroud temperatures of 630, 530, 152 R were 164.4, 95.8, and 15.9 BTU/hr respectively. The noninsulation heat leaks into the tank (12 fiberglass support struts, tank plumbing, and instrumentation lines) represent between 13 to 17 pct. of the total heat input. The heat input values would translate to liquid H2 losses of 2.3, 1.3, and 0.2 pct/day, with the tank held at atmospheric pressure.

Stochl, Robert J.↗
NASA NTRS1991

Thermal performance of a liquid hydrogen tank multilayer insulation system at warm boundary temperatures of 630, 530, and 152 R

The results are presented of a study conducted to obtain experimental heat transfer data on a liquid hydrogen tank insulated with 34 layers of MLI (multilayer insulation) for warm side boundary temperatures of 630, 530, and 150 R. The MLI system consisted of two blankets, each blanket made up of alternate layers of double silk net (16 layers) and double aluminized Mylar radiation shields (15 layers) contained between two cover sheets of Dacron scrim reinforced Mylar. The insulation system was designed for and installed on an 87.6 in. diameter liquid hydrogen tank. Nominal layer density of the insulation blankets is 45 layers/in. The insulation system contained penetrations for structural support, plumbing, and electrical wiring that would be representative of a cryogenic spacecraft. The total steady state heat transfer rates into the test tank for shroud temperatures of 630, 530, 152 R were 164.4, 95.8, and 15.9 BTU/hr, respectively. The noninsulation heat leaks into the tank (12 fiberglass support struts, tank plumbing, and instrumentation lines) represent between 13 to 17 pct. of the total heat input. The heat input values would translate to liquid H2 losses of 2.3, 1.3, and 0.2 pct/day, with the tank held at atmospheric pressure.

Stochl, Robert J.↗
NASA NTRS1991

Current collection by conducting bodies in the low earth orbit

Collection of electrons by a conducting cylinder in a flowing magnetized plasma is studied by means of numerical simulations. Transport of electrons across magnetic field lines in regions of large electric fields in the sheath structure of the cylinder is demonstrated. The potential structures, current flow in the plasma and plasma distributions around the cylinder are presented with and without a release of a neutral gas plume near the cylinder. The simulation with the plume shows current enhancement and formation of a double layer, which is found to be highly dynamic. The simulation with the neutral gas plume simulates the plasma processes occurring in a plasma contactor.

Singh, Nagendra↗
NASA NTRS2004

Charge-Dissipative Electrical Cables

Electrical cables that dissipate spurious static electric charges, in addition to performing their main functions of conducting signals, have been developed. These cables are intended for use in trapped-ion or ionizing-radiation environments, in which electric charges tend to accumulate within, and on the surfaces of, dielectric layers of cables. If the charging rate exceeds the dissipation rate, charges can accumulate in excessive amounts, giving rise to high-current discharges that can damage electronic circuitry and/or systems connected to it. The basic idea of design and operation of charge-dissipative electrical cables is to drain spurious charges to ground by use of lossy (slightly electrically conductive) dielectric layers, possibly in conjunction with drain wires and/or drain shields (see figure). In typical cases, the drain wires and/or drain shields could be electrically grounded via the connector assemblies at the ends of the cables, in any of the conventional techniques for grounding signal conductors and signal shields. In some cases, signal shields could double as drain shields.

Kolasinski, John R.↗
DOE OSTI2023

Direct imaging of electron density with a scanning transmission electron microscope

Abstract Recent studies of secondary electron (SE) emission in scanning transmission electron microscopes suggest that material’s properties such as electrical conductivity, connectivity, and work function can be probed with atomic scale resolution using a technique known as secondary electron e-beam-induced current (SEEBIC). Here, we apply the SEEBIC imaging technique to a stacked 2D heterostructure device to reveal the spatially resolved electron density of an encapsulated WSe 2 layer. We find that the double Se lattice site shows higher emission than the W site, which is at odds with first-principles modelling of valence ionization of an isolated WSe 2 cluster. These results illustrate that atomic level SEEBIC contrast within a single material is possible and that an enhanced understanding of atomic scale SE emission is required to account for the observed contrast. In turn, this suggests that, in the future, subtle information about interlayer bonding and the effect on electron orbitals could be directly revealed with this technique.

36 MATERIALS SCIENCE↗
NASA NTRS1988

Electric potential structures and propagation of electron beams injected from a spacecraft into a plasma

One-dimensional Vlasov simulations are used to study the propagation of electron beams injected from a spacecraft into an ambient plasma and the associated potential structures. It is shown that, for a given beam velocity, the propagation velocity and the potential structure depends on the beam density. In the case of moderate beams, a double layer forms near the beam head which propagates into the ambient plasma much more slowly than the initial beam velocity.

Singh, Nagendra↗