Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “effective diffusivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Molecular dynamics studies of lattice defect effects on tritium diffusion in zirconium

Tritium diffusion in α-Zr containing point defects such as vacancies or self-interstitial atoms (SIAs) is simulated using molecular dynamics. Point defects rapidly aggregate to form extended defects, such as 3D nanoclusters and Frank loops. The geometry of extended defects is affected by the presence of tritium. At low temperature and in the absence of tritium, vacancies aggregate to form stacking fault pyramids. Addition of tritium at these temperatures promotes aggregation of vacancies to form 3D nanoclusters, within which the tritium concentration can be sufficiently high to suggest that these defects may serve as nucleation sites for hydride precipitation. Trapping of tritium in vacancy nanocluster reduces the calculated bulk diffusivity by an amount proportional to the vacancy concentration. At high temperature, vacancy clusters change shape to form planar basal dislocation loops, which bind tritium less strongly, leading to a sharp reduction in the fraction of trapped tritium and a corresponding increase in tritium diffusivity at high temperature. In contrast, SIAs increase tritium diffusion through α-Zr. Analysis of atomic trajectories shows that tritium does not interact directly with SIAs. In conclusion, diffusion enhancement is instead related to expansion of the lattice.

36 MATERIALS SCIENCE↗

($\mathrm{INVITED}$)Counter-ion effect on the diffusion behavior of $\mathrm{Y}$b, $\mathrm{L}$u, and $\mathrm{N}$d ions in $\mathrm{YAG}$ transparent ceramics

The ability to fabricate additively manufactured laser waveguides with sharp dopant concentration interfaces is limited by diffusion of the dopants at the temperatures required to fully densify the material. Compositional analysis of bilayer samples, where each layer was either undoped YAG or YAG doped with Yb, Lu, or Nd, were fabricated such that all combinations were available for testing. Samples were fabricated at both 1750°C and 1850°C to determine the diffusion behavior of each dopant alone and also in the presence of a second dopant. It was found that the experimental concentration profiles exhibited both intragranular (bulk) and grain boundary contributions, and thus fitting to a complementary error function equation required the use of two diffusion coefficients. Nd always diffused further along grain boundaries than the other dopants, due in part to its small segregation coefficient in YAG. It is shown that the presence of Nd as a counter dopant inhibits intragranular diffusion of other dopants while enhancing their grain boundary diffusion. All the observed trends were attributed to a combination of intragranular lattice strain due to: dopant ions replacing yttrium substitutionally, the relative driving forces for the segregation of dopant ions to grain boundaries, and the ability of one dopant to affect the diffusion of a different dopant in the other direction to maintain charge neutrality.

36 MATERIALS SCIENCE↗

Effects of Cd Diffusion and Doping in High-Performance Perovskite Solar Cells Using CdS as Electron Transport Layer

Perovskite solar cells with stabilized power conversion efficiency exceeding 15% have been achieved, using a methylammonium lead iodide (MAPbI 3 ) absorber and CdS as the electron transport layer. X-ray photoelectron spectroscopy reveals a small presence of Cd at the surface of most perovskite films fabricated on CdS. In this work, perovskite films were deliberately doped with Cd to understand the possible impacts of Cd diffusion into the perovskite absorber layer. Doping substantially increases the grain size of the perovskite films but also reduces device performance through the formation of an electrical barrier, as inferred by the S-shape of their $J–V$ curves. Time-resolved photoluminescence measurements of the doped films do not indicate substantial nonradiative recombination due to bulk defects, but a secondary phase is evident in these films, which experiments have revealed to be the organic–inorganic hybrid material methylammonium cadmium iodide, (CH 3 NH 3 ) 2 CdI 4 . It is further demonstrated that this compound can form via the reaction of CdS with methylammonium iodide and may form as a competing phase during deposition of the perovskite. Buildup of this insulating compound may act as an electrical barrier at perovskite interfaces, accounting for the drop in device performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonlinear Layer-by-Layer Films: Effects of Chain Diffusivity on Film Structure and Swelling

Here in this paper, we report on the role of molecular diffusivity in the formation of nonlinearly growing polyelectrolyte multilayers (nlPEMs). Electrostatically bound polyelectrolyte multilayers were assembled from poly(methacrylic acid) (PMAA) as a polyanion and quaternized poly(2-(dimethylamino)ethyl methacrylate) (QPC) as a polycation. Film growth as measured by ellipsometry was strongly dependent on the time allowed for each polymer deposition step, suggesting that the diffusivities of the components are crucial in controlling the rate of film growth. Uptake of polyelectrolytes within nlPEMs was relatively slow and occurred on time scales ranging from minutes to hours, depending on the film thickness. Spectroscopic ellipsometry measurements with nlPEM films exposed to aqueous solutions exhibited high (severalfold) degrees of film swelling and different swelling values for films exposed to QPC or PMAA solutions. FTIR spectroscopy showed that the average ionization of film-assembled PMAA increased upon binding of QPC and decreased upon binding of PMAA, in agreement with the charge regulation mechanism for weak polyelectrolytes. The use of neutron reflectometry (NR) enabled quantification of chain intermixing within the film, which was drastically enhanced when longer times were allowed for polyelectrolyte deposition. Diffusion coefficients of the polycation derived from the uptake rates of deuterated chains within hydrogenated films were of the order of 10 –14 cm 2 /s, i.e., 5–6 orders of magnitude smaller than those found for diffusion of free polymer chains in solution. Exchange of the polymer solutions to buffer inhibited film intermixing. Taken together, these results contribute to understanding the mechanism of the growth of nonlinear polyelectrolyte multilayers and demonstrate the possibility of controlling film intermixing, which is highly desirable for potential future applications.

36 MATERIALS SCIENCE↗

Effect of Ni diffusion annealing temperature on crucial characterization of Bi-2223 superconducting system

In this current work, influence of diffusion annealing temperature (650-850°C) on the electrical, superconducting and structural characterizations of pure and Ni diffused Bi-2223 materials produced by conventional solid-state reaction route is surveyed by dc electrical resistivity (ρ-T), transport critical current density (J{sub c}) and powder X-ray diffraction (XRD) measurements. All the experimental findings indicate that the curial characteristics, being responsible for the novel and feasible applications, improve significantly with the enhancement of the diffusion annealing temperature up to the certain value of 700 °C after which they degrade dramatically, meaning that the properties initially get better and better as a consequence of the penetration of more and more Ni concentrations into the superconducting grains or over grain boundaries in the Bi-2223 crystal matrix. From the diffusion annealing temperature value of 700 °C onwards, the excess penetration of the Ni nanoparticles along with consecutively stacked layers in the Bi-2223 crystal structure is, however, unfavorable for the attractive and feasible applications due to new induced disorders, local structural distortions and artificial dislocations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atmospheric escape by magnetically driven wind from gaseous planets. II. Effects of magnetic diffusion

We investigate roles of Alfvénic waves in the weakly ionized atmosphere of hot Jupiters by carrying out non-ideal MHD simulations with ohmic diffusion in one-dimensional magnetic flux tubes. Turbulence at the surface excites Alfvén waves, and they propagate upward to drive hot (≈10{sup 4} K) outflows. The magnetic diffusion plays an important role in the dissipation of the Alfvénic waves in the weakly ionized atmosphere of hot Jupiters. The mass-loss rate of the spontaneously driven planetary wind is considerably reduced, in comparison with that obtained from ideal MHD simulations because the Alfvénic waves are severely damped at low altitudes in the atmosphere, whereas the wave heating is still important in the heating of the upper atmosphere. Dependence on the surface temperature, planetary radius, and velocity dispersion at the surface is also investigated. We find an inversion phenomenon of the transmitted wave energy flux; the energy flux carried by Alfvén waves in the upper atmosphere has a nonmonotonic correlation with the input energy flux from the surface in a certain range of the surface temperature because the resistivity is determined by the global physical properties of the atmosphere in a complicated manner. We also point out that the heating and mass loss are expected only in limited zones if the open magnetic field is confined in the limited regions.

79 ASTRONOMY AND ASTROPHYSICS↗

Recent Advances in Continuum Modeling of Interfacial and Transport Phenomena in Electric Double Layer Capacitors

Here, whis paper reviews recent advances in physical modeling of interfacial and transport phenomena in electric double layer capacitors (EDLCs) under both equilibrium and dynamic cycling. The models are based on continuum theory and account for (i) the Stern layer at the electrode/electrolyte interface, (ii) finite ion sizes, (iii) steric repulsions, (iv) asymmetric electrolytes featuring ions with different valencies, effective diameters, or diffusion coefficients, (v) electric-field-dependent dielectric permittivity of the electrolyte, and/or (vi) porous three-dimensional morphology of the electrodes. Typical characterization methods such as electrochemical impedance spectroscopy, cyclic voltammetry, and galvanostatic cycling were reproduced numerically to identify the dominant physical phenomena and to gain insight into experimental observations. In addition, recent thermal models derived from first principles for EDLCs under constant-current cycling accounting for irreversible Joule heating and reversible heat generation rates due to ion diffusion, steric effects, and changes in entropy are discussed. Scaling analyses of both equilibrium and dynamic models are also presented as a way to identify self-similar and asymptotic behaviors as well as to develop design rules for electrodes and electrolytes of next generation EDLCs. Throughout the document, special effort has been made to compare model predictions with experimental observations and reported data.

25 ENERGY STORAGE↗

Effects of surface diffusion on high temperature selective emitters

Using morphological and optical simulations of 1D tantalum photonic crystals at 1200K, surface diffusion was determined to gradually reduce the efficiency of selective emitters. This was attributed to shifting resonance peaks and declining emissivity caused by changes to the cavity dimensions and the aperture width. Decreasing the structure’s curvature through larger periods and smaller cavity widths, as well as generating smoother transitions in curvature through the introduction of rounded cavities, was found to alleviate this degradation. As a result, an optimized structure, that shows both high efficiency selective emissivity and resistance to surface diffusion, was presented.

36 MATERIALS SCIENCE↗

Effect of a Diffuser on Conditioning Flow Field Fluctuations at the Exit of a Rotating Detonation Combustor

Pressure gain combustion (PGC) seeks to convert fuel’s chemical energy simultaneously into thermal energy and mechanical energy, thereby reducing the entropy production in the process. Recent research has shown that the rotating detonation combustion or combustor (RDC) can provide excellent specific thrust, specific impulse, and large pressure gain through rapid energy release by continuous detonation in the circumferential direction. In this study, we present experimental results from RDC operated on methane and oxygen-enriched air to represent reactants used in gas turbines for land-based power generation. A thorough understanding of the velocity flow field exiting the combustor is important to develop future rotating detonation engine (RDE) designs, as well as to successfully implement the flow conditioning devices to power generating turbine hardware located downstream. The RDC is operated at high pressures in two ways through this study: 1) placing a back-pressure plate (BPP) downstream of the annular combustor, and 2) placing a diffuser downstream of the annular combustor. Time-resolved particle image velocimetry (TR-PIV) is applied at a frame rate of 50 kHz to quantify the RDC exit flow. A qualitative analysis is presented with vector data obtain from experimental testing. Results show that for the BPP configuration the highly periodic exit flow tilts in the azimuthal direction, indicating a significant circumferential velocity component. For the diffuser configuration the flow is dominantly axial, with an insignificant circumferential velocity component. The flow field undergoes cyclic fluctuations with the BPP, but not so with the diffuser. Results also show the challenges associated with achieving uniform seed distribution in this highly transient and rapidly changing flow field.

03 NATURAL GAS↗

Examination of the effect of differential molecular diffusion in DNS of turbulent non-premixed flames

Here, the effect of differential molecular diffusion (DMD) in turbulent non-premixed flames is studied by examining two previously reported DNS of temporally evolving planar jet flames, one with CO/H 2 as the fuel and the other with C 2 H 4 as the fuel. The effect of DMD in the CO/H 2 DNS flames in which H 2 is part of fuel is found to behave similar to laminar flamelet, while in the C 2 H 4 DNS flames in which H 2 is not present in the fuel it is similar to laminar flamelet in early stages but becomes different from laminar flamelet later. The scaling of the effect of DMD with respect to the Reynolds number Re is investigated in the CO/H 2 DNS flames, and an evident power law scaling (~Re –a with a a positive constant) is observed. The scaling of the effect of DMD with respect to the Damkohler number Da is explored in both laminar counter-flow jet C 2 H 4 diffusion flames and the C 2 H 4 DNS flames. A power law scaling (~ Da a with a a positive constant) is clearly demonstrated for C 2 H 4 nonpremixed flames.

08 HYDROGEN↗