SEARCH · Engineering Papers

Results for “dynamic shock experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

All sources NASA NTRS DOE OSTI

NASA NTRS1975

Transonic flow about a thick circular-arc airfoil

An experimental and theoretical study of transonic flow over a thick airfoil, prompted by a need for adequately documented experiments that could provide rigorous verification of viscous flow simulation computer codes, is reported. Special attention is given to the shock-induced separation phenomenon in the turbulent regime. Measurements presented include surface pressures, streamline and flow separation patterns, and shadowgraphs. For a limited range of free-stream Mach numbers the airfoil flow field is found to be unsteady. Dynamic pressure measurements and high-speed shadowgraph movies were taken to investigate this phenomenon. Comparisons of experimentally determined and numerically simulated steady flows using a new viscous-turbulent code are also included. The comparisons show the importance of including an accurate turbulence model. When the shock-boundary layer interaction is weak the turbulence model employed appears adequate, but when the interaction is strong, and extensive regions of separation are present, the model is inadequate and needs further development.

Mcdevitt, J. B.↗

DOE OSTI2024

Visualization of post-detonation fireball flowfields and comparison to CFD modeling

Visualization of flow structures within post-detonation fireballs has been performed for benchmark validation of numerical simulations. Custom pressed PETN explosives with a 12-mm diameter hemispherical form factor were used to produce a spherically symmetric post-detonation flow with low soot yield. Hydroxyl-radical planar laser induce fluorescence (OH-PLIF) was employed to visualize the structure ranging from approximately 10 μs to 35 μs after shock breakout from the explosive pellet. Fireball simulations were performed using the HyBurn Computational Fluid Dynamics (CFD) package. Experimental OH-PLIF results were compared to synthetic OH-PLIF from post-processing of CFD simulations. From the comparison of experimental and synthetic OH-PLIF images, CFD is shown to replicate much of the flow structure observed in the experiments, revealing potential differences in turbulent length scales and OH kinetics. Furthermore, results provide significant advancement in experimental resolution of these harsh turbulent combustion environments and validate physical models thereof.

Detonator↗

DOE OSTI2020

An Eulerian multimaterial framework for simulating high-explosive aquarium tests

Aquarium tests of cylindrical high-explosive charges provide optical data of the detonation front velocity and shape, propagation of the shock wave in the surrounding water, and expansion rates of the detonation products behind the front. Data from aquarium experiments is often used for calibration of reactive burn models based on phenomenological equations of state (EOS) and reaction rate laws. This paper presents a multimaterial numerical modeling framework to solve the 2D axisymmetric reactive Euler equations for high-explosive aquarium tests, in particular for ammonium nitrate - fuel oil (ANFO) explosives. An extension of the Ghost Fluid Method (GFM) is used to handle the dynamic material interfaces for the ANFO explosion products, the charge-confining material (polymethyl methacrylate PMMA), and the surrounding water. This study analyzes the sensitivity of calculations (both computational efficiency and numerical accuracy) to different algorithms for the material interface models including the original GFM versus Riemann solver-based strategies. A novel method for defining the left and right states in the interfacial Riemann problem eliminates the need for sorting or nodal interpolation during the projection along the material interface. Numerical tests indicate that populating the interface node values using the Riemann solution mitigate the overheating error observed in steady-state calculations. Solution convergence and computational efficiency are explored as a function of the spatial and temporal order of the schemes. Results from the computational model with analytical equations of state and fitted reaction rate parameters show very good quantitative agreement with experimentally observed detonation front velocity, reaction products expansion, and shock wave propagation in the surrounding water for a cylindrical ANFO charge encased in PMMA. Finally, the proposed modeling framework, in conjunction with experimental tests, provides a reliable tool to assess equations of state and reaction rate expressions for reactive burn models of confined high explosives.

42 ENGINEERING↗

DOE OSTI2023

Direct imaging of shock wave splitting in diamond at Mbar pressure

Understanding the behavior of matter at extreme pressures of the order of a megabar (Mbar) is essential to gain insight into various physical phenomena at macroscales—the formation of planets, young stars, and the cores of super-Earths, and at microscales—damage to ceramic materials and high-pressure plastic transformation and phase transitions in solids. Under dynamic compression of solids up to Mbar pressures, even a solid with high strength exhibits plastic properties, causing the induced shock wave to split in two: an elastic precursor and a plastic shock wave. This phenomenon is described by theoretical models based on indirect measurements of material response. The advent of x-ray free-electron lasers (XFELs) has made it possible to use their ultrashort pulses for direct observations of the propagation of shock waves in solid materials by the method of phase-contrast radiography. However, there is still a lack of comprehensive data for verification of theoretical models of different solids. Here, we present the results of an experiment in which the evolution of the coupled elastic–plastic wave structure in diamond was directly observed and studied with submicrometer spatial resolution, using the unique capabilities of the x-ray free-electron laser (XFEL). The direct measurements allowed, for the first time, the fitting and validation of the 2D failure model for diamond in the range of several Mbar. Our experimental approach opens new possibilities for the direct verification and construction of equations of state of matter in the ultra-high-stress range, which are relevant to solving a variety of problems in high-energy-density physics.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Development and evaluation of a skeletal mechanism for EHN additized gasoline mixtures in large Eddy simulations of HCCI combustion

Advanced Low Temperature Combustion modes, such as the Sandia proposed Additive-Mixing Fuel Injection (AMFI), can unlock significant potential to boost fuel conversion efficiency and ultimately improve the energy conversion of internal combustion engines. This is a novel improved combustion process that is enabled by supplying small (<5%) variable amounts of autoignition improver to the fuel to enhance the engine operation and control. Common, diesel-fuel ignition-quality enhancing additive, 2-ethylexyl nitrate (EHN), is doped into gasoline to enable Sandia LTGC + AMFI combustion. This manuscript focuses on the development of a reduced sub-mechanism for EHN chemical kinetics at engine relevant conditions that is implemented into a skeletal mechanism for chemical kinetic studies of gasoline surrogate fuels. The mechanism validation utilized zero-dimensional numerical simulations and comparison to shock tube ignition-delay data of pure and EHN-doped n-heptane. Additional validation is presented with Homogeneous Charge Compression-Ignition (HCCI) engine data of pure and EHN-doped research-grade E10 gasoline. Then, the mechanism was deployed in a 3-D computational fluid dynamics (CFD) using Large Eddy Simulations (LES) to model the HCCI engine experiments of 0.4% vol EHN additized E10 gasoline at several equivalence ratios. Simulations showed a very good performance of the mechanism, and the model accurately reproduced (a) the ignition point, (b) combustion phasing, (c) combustion duration, and (d) the peak of the heat release rates of the engine experiments. The results show that EHN promotes Low-Temperature Heat Release, ultimately driving the gasoline to autoignite at thermodynamic conditions where the fuel would not otherwise ignite. Overall, this work demonstrates a viable reduced chemical-kinetic mechanism for EHN and shows that it can be combined with a skeletal gasoline mechanism for CFD-LES analysis of well-mixed LTGC that matches well with experimental results. The CFD-LES analysis also shows the spatial distribution of EHN-fuel interactions that control the autoignition throughout the combustion chamber.

Guleria, Gaurav↗

DOE OSTI2023

Deformation and failure of the CrCoNi medium-entropy alloy subjected to extreme shock loading

The extraordinary work hardening ability and fracture toughness of the face-centered cubic (fcc) high-entropy alloys render them ideal candidates for many structural applications. Here, the deformation and failure mechanisms of an equiatomic CrCoNi medium-entropyalloy (MEA) were investigated by powerful laser-driven shock experiments. Multiscale characterization demonstrates that profuse planar defects including stacking faults, nanotwins, and hexagonal nanolamella were generated during shock compression, forming a three-dimensional network. During shock release, the MEA fractured by strong tensile deformation and numerous voids was observed in the vicinity of the fracture plane. High defect populations, nanorecrystallization, and amorphization were found adjacent to these areas of localized deformation. Molecular dynamics simulations corroborate the experimental results and suggest that deformation-induced defects formed before void nucleation govern the geometry of void growth and delay their coalescence. Our results indicate that the CrCoNi-based alloys are impact resistant, damage tolerant, and potentially suitable in applications under extreme conditions.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Three-dimensional signatures of self-similarity in a high-energy-density plasma shear-driven mixing layer

A hydrodynamic shear mixing layer experiment at the National Ignition Facility had previously demonstrated Eulerian scaling of integrated, late-time quantities, including turbulent kinetic energy. In this manuscript, the experiment is repeated with new materials. In this work, using the new dataset, we demonstrate that Euler-number scalings hold not just for late time, but dynamically throughout the experiment, for measurements in all three spatial dimensions. Incorporating the dynamic scaling leads to an enhanced calculation that the heavier of the two scaled experiments has approached three generations of mergers of its primary instability's structures and a consistent observation of such a merger in action in the lighter of the two scaled experiments. Furthermore, the improved scrutiny of the time evolution of instability structures leads to sharper estimates of turbulent kinetic energy, including a demonstration of different behaviors correlating with surface roughness (quantitatively consistent with transitions between laminar and turbulent initial states), as predicted by a Reynolds-averaged turbulent model, which evidently correctly handles the differing shock-roughness interactions to drive its internal state of the model into different regimes. Altogether, a picture arises of the analytical improvements in treating these variations (of times, densities, and roughnesses) as a unified whole and of multiple ways by which deviations from the scaling could indicate an onset of non-hydrodynamic behavior. Such deviations were not expected for these experiments (which models correctly indicated would remain hydrodynamic) but could be introduced by, for example, imposing external fields or increasing drive energy to test conditions relevant to inertial confinement fusion or other high-energy-density experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRSDate not supplied

Summary of Shock Wave Turbulent Boundary Layer Interaction Experiments In a Circular Test Section

A series of experiments were performed at Mach 2.5 in a 17 cm diameter circular test section to characterize an impinging/reflected shock wave turbulent boundary layer interaction generated by a cone-cylinder centerbody. The cone-cylinder centerbody generates a conical shock wave that interacts with the naturally occurring boundary layer developing on the test section wall. Three different cone angles were used in the experiment to study unseparated, incipiently separated, and separated interactions. When the cone-cylinder centerbody is positioned on the centerline, a flowfield which is two-dimensional in the mean is generated. Three dimensional interactions were also created by offsetting the cone-cylinder centerbody from the test section centerline. The results are intended to provide benchmark quality datasets for computational fluid dynamics (CFD) validation without the pitfalls inherent in rectangular configurations where corner effects prohibit a truly two-dimensional flow in the mean. The experimental measurements included surface flow visualization, wall static pressure, flowfield Pitot tube pressure, constant-voltage anemometry (CVA) normal hot-wire, and particle image velocimetry (PIV) measurements. The hot-wire measurements were used to calculate mean mass flux and total temperature profiles, mass flux and total temperature turbulence intensities, and the mass flux-total temperature correlation. The PIV measurements provide three-dimensional mean velocity measurements. Agreement between the pressure, hot-wire, and PIV measurements is established in the undisturbed upstream flowfield.

Supersonic↗

NASA NTRSDate not supplied

Summary of Shock Wave Turbulent Boundary Layer Interaction Experiments in a Circular Test Section

compressible flow↗

DOE OSTI2026

First-principles simulation of a shocked H-He mixture along the principal Hugoniot

Recent laser-shock experiments on an H–He mixture containing 11% helium (atomic fraction) have suggested the presence of an immiscibility region inside Jupiter. Reflectivity measurements were used as the primary diagnostic of H–He demixing, with discontinuities in the optical reflectivity proposed as a signature of phase separation under conditions relevant to Jupiter's interior. Here, we investigate shock-compressed H–He using ab initio molecular dynamics simulations with optical properties evaluated within the Kubo–Greenwood formalism. The equation of state and ionic configurations were obtained using the thermal Tr 2 SCANL meta-GGA exchange–correlation (XC) functional, while optical properties were computed using the recently developed RS-KDT0 range-separated thermal hybrid XC, which provides state-of-the-art accuracy for band-gap predictions in the warm dense matter regime. The calculated reflectivity shows overall good agreement with experimental measurements; however, no discontinuity is observed at elevated temperatures. Moreover, the reflectivity predictions for the mixed system are consistent with the experimental measurements in the temperature range where the mixture is inferred to be demixed. Furthermore, these results suggest that reflectivity alone may not provide a unique or sensitive diagnostic of H–He demixing at low helium concentrations under these conditions.

Density functional calculations↗

DOE OSTI2022

High-precision inversion of dynamic radiography using hydrodynamic features

While radiography is routinely used to probe complex, evolving density fields in research areas ranging from materials science to shock physics to inertial confinement fusion and other national security applications, complications resulting from noise, scatter, complex beam dynamics, etc. prevent current methods of reconstructing density from being accurate enough to identify the underlying physics with sufficient confidence. In this work, we show that using only features that are robustly identifiable in radiographs and combining them with the underlying hydrodynamic equations of motion using a machine learning approach of a conditional generative adversarial network (cGAN) provides a new and effective approach to determine density fields from a dynamic sequence of radiographs. In particular, we demonstrate the ability of this method to outperform a traditional, direct radiograph to density reconstruction in the presence of scatter, even when relatively small amounts of scatter are present. Our experiments on synthetic data show that the approach can produce high quality, robust reconstructions. We also show that the distance (in feature space) between a testing radiograph and the training set can serve as a diagnostic of the accuracy of the reconstruction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2025

Planar shock-induced bubble collapse and jetting in water captured via X-ray phase contrast imaging

Shock wave–bubble interactions in water manifest rich dynamics driven by a combination of strong pressure and density mismatches. They have a wide variety of applications, including the injection of pharmaceuticals, and through scaling, enable the exploration of various aspects of high-energy-density systems such as inertial confinement fusion. In this work, the interaction between a micrometric nitrogen bubble and a planar shock wave, characterized by a Mach number of M = 1.24 and a peak pressure of p max = 0.57 , is experimentally recorded using ultra-high-speed x-ray phase contrast imaging. Highly resolved radiographs provide access to all phase discontinuities along the beam path, offering quantities such as the time-varying bubble size, the speed of a jet produced during the bubble collapse, and the time evolution of the shock wave front, which are critical benchmark data for numerical scheme validation. This study addresses the lack of well-characterized, repeatable, and high spatiotemporal resolution experiments at negative Atwood numbers by providing shock–bubble visualization and corresponding numerical simulation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2025

Customizable wave tailoring nonlinear materials enabled by bilevel inverse design

Abstract Passive wave transformation via nonlinearity is ubiquitous in settings from acoustics to optics and electromagnetics. It is well known that different nonlinearities yield different effects on propagating signals, which raises the question of “what precise nonlinearity is the best for a given wave tailoring application?” In this work, considering a one-dimensional spring-mass chain connected by polynomial springs (a variant of the Fermi-Pasta-Ulam-Tsingou system), we introduce a bilevel inverse design method which couples the shape optimization of structures for tailored constitutive responses with reduced-order nonlinear dynamical inverse design. We apply it to two qualitatively distinct problems—minimization of peak transmitted kinetic energy from impact, and pulse shape transformation—demonstrating our method’s breadth of applicability. For the impact problem, we obtain two fundamental insights. First, small differences in nonlinearity can drastically change the dynamic response of the system, from severely under- to outperforming a comparative linear system. Second, the oft-used strategy of impact mitigation via “energy locking” bistability can be significantly outperformed by our optimal nonlinearity. We validate this case with impact experiments and find excellent agreement. This study establishes a framework for broader passive nonlinear mechanical wave tailoring material design, with applications to computing, signal processing, shock mitigation, and autonomous materials.

Science & Technology - Other Topics↗

NASA NTRS1993

Exploratory study of shock reflection near an expansion corner

Experiments were performed at Mach 8 in which a shock was reflected off a low Reynolds number, turbulent boundary layer past an expansion corner. The shock was generated by 2- and 4-deg sharp wedges, and the corner was either 2.5 or 4.25 deg. The inviscid shock reflection was one boundary layer thickness ahead or behind the corner or at the corner itself. All interactions were unseparated. The dynamic surface pressure distributions were examined together with the case of shock reflection on a flat plate. With shock reflection ahead of the corner, the mean surface pressure downstream was attenuated due to the proximity of the corner. With shock reflection downstream of the corner, the surface pressure distribution showed a reduced upstream influence. The highly swept expansion fan produced a surface pressure which rose gently downstream with no minima, unlike in supersonic flows with the same shock-corner separation distance. In many of the interactions, an anomalous pressure peak was found downstream. The surface pressure through the interaction exhibited unsteadiness.

Lu, Frank K.↗

NASA NTRS1998

Quantitative Interferometry in the Severe Acoustic Environment of Resonant Supersonic Jets

There is renewed interest in the study of supersonic jets due to advances in high speed jet propulsion, supersonic combustion, and jet noise suppression for the next generation supersonic commercial transport. Understanding fundamental fluid dynamic and acoustic processes for these applications requires quantitative velocity, density and temperature measurements. In this paper we present data demonstrating a new, robust interferometer that can provide accurate data even in the presence of intense acoustic fields. This novel interferometer, the Liquid Crystal Point Diffraction Interferometer (LCPDI), was developed earlier for space flight experiments and is applied here to the case of a supersonic shock-containing jet. The LCPDI is briefly described, then integrated line-of-sight density data from the LCPDI for two underexpanded free jets are presented. The experimental shock spacings agree well with theory.

Mercer, Carolyn R.↗

DOE OSTI2021

On the study of hydrodynamic instabilities in the presence of background magnetic fields in high-energy-density plasmas

Blast-wave-driven hydrodynamic instabilities are studied in the presence of a background B-field through experiments and simulations in the high-energy-density (HED) physics regime. In experiments conducted at the Laboratoire pour l’utilisation des lasers intenses (LULI), a laser-driven shock-tube platform was used to generate a hydrodynamically unstable interface with a prescribed sinusoidal surface perturbation, and short-pulse x-ray radiography was used to characterize the instability growth with and without a 10-T B-field. The LULI experiments were modeled in FLASH using resistive and ideal magnetohydrodynamics (MHD), and comparing the experiments and simulations suggests that the Spitzer model implemented in FLASH is necessary and sufficient for modeling these planar systems. These results suggest insufficient amplification of the seed B-field, due to resistive diffusion, to alter the hydrodynamic behavior. Although the ideal-MHD simulations did not represent the experiments accurately, they suggest that similar HED systems with dynamic plasma-β (=2μ0ρv2/B2) values of less than ∼100 can reduce the growth of blast-wave-driven Rayleigh–Taylor instabilities. These findings validate the resistive-MHD FLASH modeling that is being used to design future experiments for studying B-field effects in HED plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Stress field measurements using quantitative schlieren

Quantitative schlieren analysis is extended here to optically transparent solids in quasi-static and dynamic experiments to measure stress distributions. The quasi-static experiments in polymethyl methacrylate (PMMA) compared refraction angles and stress gradients calculated from schlieren images to the analytical Flamant solution of a line load on a half-space. The quantitative schlieren measurements of the stress field in the thin sample with a load compared well to the analytical solution. The analysis method was then extended to explosive induced shock waves in PMMA. The explosive induced response of PMMA was experimentally studied using high-speed schlieren to visualize the shock propagation in conjunction with Photon Doppler Velocimetry (PDV) to record surface velocity histories. The stress state estimated from the schlieren images was compared to the stress calculated from the PDV measurements. High-speed imaging limitations caused the shock wave to not be fully resolved in the images, but was resolved in the PDV measurement. The stress state behind the shock calculated from the high-speed images followed a similar trend to the stress calculated from the PDV measurements.

Physics↗

NASA NTRS1977

Ignition of magnesium powders in shock wave induced flows

Ignition of magnesium powders, resulting from an interaction with incident shock wave-induced flows, has been studied. A numerical analysis of particle dynamics and heating is presented and compared with experimental measurements. The induction period is strongly dependent on convective heat transfer and not on chemical reaction rate. Experimentally observed ignition delays were on the order of 100 microns and were inversely dependent on shock strength and initial pressure, directly dependent on particle size and cloud concentration, and independent of oxygen concentration down to 2.3 percent oxygen. Good agreement between experiment and theory was realized.

Fox, T. W.↗