Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dissipative systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Evidence for two-dimensional inertial turbulence in a cosmic-scale low-beta plasma

Magnetospheric electric-field power spectral densities measured from high-altitude balloons and the Hawkeye 1 satellite are combined in wavenumber space and exhibit a power-law spectrum with index -1.6 + or -0.3 below a wavenumber of 0.05 reciprocal km and index -2.8 + or -0.3 above 2 reciprocal km. This spectrum agrees with that predicted for the inertial subrange of an isotropic homogeneous two-dimensional fluid and for a two-dimensional plasma when energy enters the system at the spectral knee and there exists a viscous dissipation mechanism at large wavenumbers. The wavelength of the spectral knee corresponds to that of folds and curls in the aurora and may be due to an instability of the auroral particle beams.

Kelley, M. C.↗
NASA NTRS1990

Advanced spacecraft: What will they look like and why

The next century of spaceflight will witness an expansion in the physical scale of spacecraft, from the extreme of the microspacecraft to the very large megaspacecraft. This will respectively spawn advances in highly integrated and miniaturized components, and also advances in lightweight structures, space fabrication, and exotic control systems. Challenges are also presented by the advent of advanced propulsion systems, many of which require controlling and directing hot plasma, dissipating large amounts of waste heat, and handling very high radiation sources. Vehicle configuration studies for a number of theses types of advanced spacecraft were performed, and some of them are presented along with the rationale for their physical layouts.

Price, Humphrey W.↗
NASA NTRS1991

Microwave simulations of a tropical rainfall system with a three-dimensional cloud model

A three-dinensional cloud model-microwave radiative transfer model combination is used to study the relations among the precipitation and other microphysical characteristics of a tropical oceanic squall line and the upwelling radiance at pertinent microwave frequencies. Complex brightness temperature-rain rate relations are evident at the full horizontal resolution (1.5 km) of the models, with spatial averaging producing smoother, shifter relations in most cases. Nonprecipitating cloud water is shown to be important in understanding the resulting distribution of brightness temperature. At the mature stage, convective portions of the cloud system are shown to produce different brightness temperature relations than the stratiform portion, primarily related to the distribution of cloud water. The evolution of the convective system from a small convective complex through its mature stage and the beginning of its dissipation also is shown to result in a variation of brightness temperature-rain relations, related to the distribution of cloud water and the evolution of ice in the precipitating system. The results of the study point to the need to take into account the evolution of nonprecipitating cloud water and precipitation-sized ice in the retrieval of rain from passive microwave space observations. This effect is evident for both the life cycle of individual convective elements and the life cycle of the convective system as a whole.

Adler, Robert A.↗
NASA NTRS1992

CSI design of articulated space structures

Integrated control and structural design of flexible spacecraft with articulated appendages is considered. A procedure is proposed by which the resulting design is optimal with respect to a measure of performance for all possible system articulation conditions. The controller design is of the dynamic dissipative type which provides guaranteed closed-loop stability. The procedure is demonstrated for a simple multibody flexible spacecraft model with an articulated appendage.

Kelkar, Atul G.↗
NASA NTRS1994

Collapse of primordial gas clouds and the formation of quasar black holes

The formation of quasar black holes during the hydrodynamic collapse of protogalactic gas clouds is discussed. The dissipational collapse and long-term dynamical evolution of these systems is analyzed using three-dimensional numerical simulations. The calculations focus on the final collapse stages of the inner baryonic component and therefore ignore the presence of dark matter. Two types of initial conditions are considered: uniformly rotating spherical clouds, and iirotational ellipsoidal clouds. In both cases the clouds are initially cold, homogeneous, and not far from rotational support (T/(absolute value of W) approximately equals 0.1). Although the details of the dynamical evolution depend sensitively on the initial conditions, the qualitative features of the final configurations do not. Most of the gas is found to fragment into small dense clumps, that eventually make up a spheroidal component resembling a galactic bulge. About 5% of the initial mass remains in the form of a smooth disk of gas supported by rotation in the gravitational potential potential well of the outer spheroid. If a central seed black hole of mass approximately greater than 10(exp 6) solar mass forms, it can grow by steady accretion from the disk and reach a typical quasar black hole mass approximately 10(exp 8) solar mass in less than 5 x 10(exp 8) yr. In the absence of a sufficiently massive seed, dynamical instabilities in a strongly self-gravitating inner region of the disk will inhibit steady accretion of gas and may prevent the immediate formation of quasar.

Loeb, Abraham↗
NASA NTRS2004

Flow field topology of transient mixing driven by buoyancy

Transient mixing driven by buoyancy occurs through the birth of a symmetric Rayleigh-Taylor morphology (RTM) structure for large length scales. Beyond its critical bifurcation the RTM structure exhibits self-similarity and occurs on smaller and smaller length scales. The dynamics of the RTM structure, its nonlinear growth and internal collision, show that its genesis occurs from an explosive bifurcation which leads to the overlap of resonance regions in phase space. This event shows the coexistence of regular and chaotic regions in phase space which is corroborated with the existence of horseshoe maps. A measure of local chaos given by the topological entropy indicates that as the system evolves there is growth of uncertainty. Breakdown of the dissipative RTM structure occurs during the transition from explosive to catastrophic bifurcation; this event gives rise to annihilation of the separatrices which drives overlap of resonance regions. The global bifurcation of explosive and catastrophic events in phase space for the large length scale of the RTM structure serves as a template for which mixing occurs on smaller and smaller length scales. Copyright 2004 American Institute of Physics.

Nonlinear Dynamics↗
NASA NTRS2015

Is the Electron Avalanche Process in a Martian Dust Devil Self-Quenching?

Viking era laboratory experiments show that mixing tribocharged grains in a low pressure CO2 gas can form a discharge that glows, indicating the presence of an excited electron population that persists over many seconds. Based on these early experiments, it has been predicted that martian dust devils and storms may also contain a plasma and new plasma chemical species as a result of dust grain tribo-charging. However, recent results from modeling suggest a contrasting result: that a sustained electron discharge may not be easily established since the increase in gas conductivity would act to short-out the local E-fields and quickly dissipate the charged grains driving the process. In essence, the system was thought to be self-quenching (i.e., turn itself off). In this work, we attempt to reconcile the difference between observation and model via new laboratory measurements. We conclude that in a Mars-like low pressure CO2 atmosphere and expected E-fields, the electron current remains (for the most part) below the expected driving tribo-electric dust currents (approx. 10 microA/m(exp. 2)), thereby making quenching unlikely.

Electron↗
NASA NTRS2002

Operating SIRTF for maximum lifetime

The instruments of the Space Infrared Telescope Facility (SIRTF) are cooled directly by liquid helium, while the optical system is cooled by helium vapor. The greater the power dissipation into the liquid helium, the more vapor is produced, and the colder the telescope. Observations at shorter wavelengths do not require telescope temperatures as low as those required at longer wavelengths. By taking advantage of this, it may be possible to extend the helium and mission lifetime by 10% or even 20%.

cryogenics↗
NASA NTRS1973

Evolution of satellite resonances by tidal dissipation.

Analysis of a realistic model shows how satellites' gravitational interaction can halt their differential tidal evolution when resonant commensurabilities of their orbital periods are reached. The success of this study lends support to the hypothesis that orbit-orbit resonances among satellites in the solar system, including the Titan-Hyperion case, did evolve as a result of tidal energy dissipation. Consideration of the time scale for this evolution process, possible now that the capture mechanism has been revealed, can offer more sophisticated constraints on the tidal dissipation function, Q, and on past orbital conditions.

Greenberg, R.↗
NASA NTRS1988

Nonlinear modeling and estimation of slew induced structural deformations

A model of the nonlinear dynamics of a deformable maneuvering multibody system is described, whereby elastic deformation are modeled by restoring forces and dissipative forces at point mass appendages. This model is brought into bilinear form. Estimation of deformations occasioned by rapid slewing maneuvers is carried out by a filter based on a globally equivalent linear model of the bilinear dynamics, and is shown to be an improvement over the extended Kalman filter. To further alleviate the computational burden, the estimated deformation state is propagated between observations by a low dimensional operator spline interpolator of bilinear system Volterra series, which is easily implemented.

Dwyer, T. A. W., III↗
NASA NTRS1991

Bilinear modeling and state estimation of slew-induced deformations of a flexible multibody system

A model of the nonlinear dynamics of a deformable maneuvering multibody system is described, whereby elastic deformations are modeled by restoring forces and dissipative forces at point mass appendages. This model is brought into bilinear form. Estimation of deformations occasioned by rapid slewing maneuvers is carried out by a filter based on a globally equivalent linear model of the bilinear dynamics, and is shown to be an improvement over the extended Kalman filter. To further alleviate the computational burden, the estimated deformation state is propagated between observations by a low dimensional operator spline interpolator of bilinear system Volterra series, which is easily implemented.

Dwyer, Thomas A. W., III↗
NASA NTRS1982

Orbital evolution of the Galilean satellites

The orbital motions of the Galilean satellites exert dramatic control over their physical properties (most notably Io's) through tidal heating. In turn, tidal dissipation in the satellites, as well as in Jupiter, has governed the evolution of the orbits and, in particular, of the Laplace resonance. If the system started out of the resonance and evolved into it, forced eccentricities would have increased with time. Hence, the tidal melting of Io and the cracking of Europa'a surface may have occurred relatively recently. This theory requires that Jupiter's tidal dissipation factor be greater than about two million, a rather low value (high rate of tidal dissipation) compared with most models of Jovian interior processes. Alternatively, the system may have started even deeper in the resonance than it is today, a scenario which is consistent with larger values of the tidal dissipation factor. This model, with its correspondingly large initial forced eccentricities, would imply (1) that Io melted early and fast, and may have remained molten with only a thin solid skin until the present and (2) that the water mantles of both Europa and Ganymede remained largely molten for considerably longer than Callisto did, but later froze as their eccentricities and tidal heating decreased.

Greenberg, R.↗
NASA NTRS1976

Air-bearing spin facility for measuring energy dissipation

The air-bearing spin facility was developed to determine experimentally the effect of energy dissipation upon the motion of spinning spacecraft. The facility consists of an air-bearing spin table, a telemetry system, a command system, and a ground control station. The air-bearing spin table was designed to operate in a vacuum chamber. Tests were run on spacecraft components such as fuel tanks, nutation dampers, reaction wheels, and active nutation damper systems. Each of these items affected the attitude of a spinning spacecraft. An experimental approach to determine these effects was required because the dissipation of these components could not be adequately analyzed. The results of these experiments have been used, with excellent results, to predict spacecraft motion.

Peterson, R. L.↗
NASA NTRS1973

A study of space shuttle energy management, approach and landing analysis

The steering system of the space shuttle vehicle is presented for the several hundred miles of flight preceding landing. The guidance scheme is characterized by a spiral turn to dissipate excess potential energy (altitude) prior to a standard straight-in final approach. In addition, the system features pilot oriented control, drag brakes, phugoid damping, and a navigational capacity founded upon an inertial measurement unit and an on-board computer. Analytic formulas are used to calculate, represent, and insure the workability of the system's specifications

Morth, R.↗
NASA NTRS1990

Damping and vibration considerations for the design of optical systems in a launch/space environment

Engineering philosophies for the design of optical systems launched into space and operating in a vacuum or cryovacuum environment are reviewed. Particular attention is given to sources of energy dissipation which are usually lumped under a single modal parameter denoted as the equivalent viscous damping coefficient. Caging and/or damping system components or application of viscoelastic materials and/or dry friction devices are considered to be alternative methods for stabilizing instruments sensitive to motion.

Richard, Ralph M.↗
NASA NTRS2003

TAMDAR Capabilities Development

In this viewgraph presentation, information is provided on a collaboration between NASA, the FAA (Federal Aviation Administration), and NOAA (National Oceanographic and Atmospheric Association), particularly regarding the development of a TAMDAR Sensor system. TAMDAR is envisioned to downlink weather data such as icing, temperature, pressure altitude, humidity, magnetic heading, eddy dissipation rate, true airspeed, dew point, density altitude, and winds at altitude from non-jet aircraft. The weather data will be sent to FSL (Forecast Systems Laboratory), FSS (Flight Service Station), ATC (Air Traffic Control), AWC (Aviation Weather Center), and others via a ground-based infrastructure and to other aircraft. New weather products will be generated and uplinked to the cockpit.

Daniels, Taumi↗
NASA NTRS1988

Wavenumber selection for single-wave steady states in a nonlinear baroclinic system

The principles involved in the selection of a wavenumber for single-wave steady states are examined numerically and analytically in the framework of an Eady-type model with uneven Ekman dissipation. The process of selection involves the determination of the preferred wavenumber for a given parameter setting in the nonlinear system by testing the stability of steady single-wave states in a triad with wavenumbers n(0) - 1, n(0), and n(0) + 1, where n(0) may change successively in the selection procedure. In a given triad for a given parameter setting, the preferred wave is the wave with the nonlinear Eady angle that is last to vanish.

Weng, H.-Y.↗
NASA NTRS1989

Modeling and control of flexible space platforms with articulated payloads

The first steps in developing a methodology for spacecraft control-structure interaction (CSI) optimization are identification and classification of anticipated missions, and the development of tractable mathematical models in each mission class. A mathematical model of a generic large flexible space platform (LFSP) with multiple independently pointed rigid payloads is considered. The objective is not to develop a general purpose numerical simulation, but rather to develop an analytically tractable mathematical model of such composite systems. The equations of motion for a single payload case are derived, and are linearized about zero steady-state. The resulting model is then extended to include multiple rigid payloads, yielding the desired analytical form. The mathematical models developed clearly show the internal inertial/elastic couplings, and are therefore suitable for analytical and numerical studies. A simple decentralized control law is proposed for fine pointing the payloads and LFSP attitude control, and simulation results are presented for an example problem. The decentralized controller is shown to be adequate for the example problem chosen, but does not, in general, guarantee stability. A centralized dissipative controller is then proposed, requiring a symmetric form of the composite system equations. Such a controller guarantees robust closed loop stability despite unmodeled elastic dynamics and parameter uncertainties.

Graves, Philip C.↗