Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diffusion flames”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

EGR Dilution and Fuel Property Effects on High-Efficiency Spark-Ignition Flames

Modern spark ignition internal combustion engines rely on fast combustion rates and high dilution to achieve high brake thermal efficiencies. To accomplish this, new engine designs have moved towards increased tumble ratios and stroke-to-bore ratios. Increased tumble ratios correlate positively with increases in turbulent kinetic energy and improved fuel and residual gas mixing, all of which favor faster and more efficient combustion. Longer stroke-to-bore ratios allow higher geometric compression ratios and use of late intake valve closing to control peak compression pressures and temperatures. The addition of dilution to improve efficiency is limited by the resulting increase in combustion instabilities manifested by cycle-to-cycle variability. A number of effects - preferential diffusion, turbulence-combustion interactions, stochastic flow patterns, laminar-turbulent flame kernel transitions, and relative length and velocity scales between flame and turbulence - are believed to be responsible for the increase in cycle-to-cycle variations, where their contributions are likely interlinked. Several studies have shown the influence of stochastic flow characteristics on the nature of combustion instabilities, such as velocity patterns on flame kernel formation and cycle-to-cycle variations in residual gas. However, few have focused on the specific effects of fuel properties. The objective of this work is to contrast the effects of dilution on propane stoichiometric combustion against gasoline. Dilution tolerance experiments were conducted in a purpose-built high stroke-to-bore ratio single cylinder engine with both gasoline and LPG. Three-dimensional full cycle computational fluid dynamics (CFD) simulations employing a level-set combustion approach and Reynolds averaged Navier-Stokes (RANS) turbulence modeling was used to qualitatively assess the changes in length and velocity scales for turbulence and the flame. The experimental results showed that LPG can tolerate higher exhaust gas recirculation (EGR) dilution under a variety of conditions. Analysis of CFD simulations showed that propane flames are likely less sensitive to influences from the flow field due to less thickening of the flame and higher effective flame speeds.

33 ADVANCED PROPULSION SYSTEMS↗

Large-eddy simulation of a multi-injection flame in a diesel engine environment using an unsteady flamelet/progress variable approach

In this work, large-eddy simulations (LESs) are conducted for a multiple-injection flame in a diesel engine environment using an unsteady flamelet/progress variable (UFPV) approach in which differential diffusion is considered. The suitability of the UFPV tabulation approach is first evaluated through a priori analyses using the state-of-the-art direct numerical simulation (DNS) dataset. Both the instantaneous data and the conditional values for the major and minor species' mass fractions are compared between the UFPV and the DNS. The comparisons show that the proposed UFPV tabulation approach can give good predictions for the multiple-injection flame at different injection phases. While the gas temperature and major species mass fractions can be accurately predicted with or without differential diffusion being considered in the UFPV flamelet library, the prediction accuracy for the highly diffusive species (e.g., hydrogen) in the main injection phase can be noticeably improved when differential diffusion is taken into account. The fully coupled LES/UFPV simulations show that the overall structure of the multiple-injection flame can be predicted, and the conditional thermo-chemical values are close to the filtered DNS dataset. The reasons for the remaining discrepancies found in the a priori analyses and the a posteriori simulations using the UFPV approach are analyzed.

Wen, Xu (ORCID:0000000331334292)↗

Analysis of second-order conditional moment closure applied to an autoignitive lifted hydrogen jet flame

The timing and location of autoignition can be highly sensitive to turbulent fluctuations of composition. Second-order Conditional Moment Closure (CMC) provides transport equations for conditional (co)variances in turbulent reacting flows. CMC equations accounting for compressibility and differential diffusion are analyzed using data from direct numerical simulation of an autoignitive lifted turbulent hydrogen jet flame [C.S. Yoo, R. Sankaran, J.H. Chen, Three-dimensional direct numerical simulation of turbulent lifted hydrogen/air jet flame in a heated coflow. Part 1. J. Fluid. Mech., (2008)]. At the flame base, second-order moments were required to accurately model the conditional reaction rates. However, over 80% of the second-order reaction rate component was obtainable with a small subset (16%) of the species-temperature covariances. The balance of the second-order CMC equation showed that turbulent transport across spatial composition gradients initiates generation of conditional variances.

Energy & Fuels↗

Simulations of laminar flame propagation in droplet mists

In order to clarify the conditions conducive to propagation of premixed flames in quiescent sprays, a one-dimensional code with detailed chemistry and transport was used. n-Heptane and n-decane, distinguished by their volatility, were studied under atmospheric and low temperature, low pressure conditions. The effects of initial droplet diameter, overall equivalence ratio {phi}{sub 0} and droplet residence time before reaching the flame front were examined. Increasing the residence time had an effect only for n-heptane, with virtually no evaporation occurring before the flame front for n-decane. The trends were only marginally correlated with the local gaseous equivalence ratio {phi}{sub eff} at the location of maximum heat release rate. {phi}{sub eff} could be as low as 0.4 (beyond the lean flammability limit), but the flame speed could still be 40% of the gaseous stoichiometric flame speed S{sub L,0}. For n-heptane, {phi}{sub eff} increased towards {phi}{sub 0} with smaller droplets while high flame speeds occurred when {phi}{sub eff} was near 1. This implied that the highest flame speed was achieved with small droplets for {phi}{sub 0} {<=} 1 and with relatively large droplets for {phi}{sub 0} > 1. In the latter case, the oxidiser was completely consumed in the reaction zone and droplets finished evaporating behind the flame where the fuel was pyrolysed. The resulting small species, mainly C{sub 2}H{sub 2}, C{sub 2}H{sub 4} and H{sub 2}, diffused back to the oxidation zone and enhanced the reaction rate there. Ultimately, this could result in flame speeds higher than S{sub L,0} even with {phi}{sub 0} = 4. For n-decane, the same trends were followed but smaller droplets were needed to reach the same {phi}{sub eff} due to the slow evaporation rate. Under low pressure and low temperature, the effects of pressure and temperature on {phi}{sub eff} and the flame speed were competitive and resulted in values close to the ones at atmospheric conditions. (author)

33 ADVANCED PROPULSION SYSTEMS↗

Chemical explosive mode analysis of lean blowout in a gas turbine combustor

In this study, stabilization and lean blowout (LBO) mechanisms in a gas turbine combustor are numerically studied based on large eddy simulation (LES) data and the chemical explosive mode analysis (CEMA). Three CEMA-based local combustion modes, that is, auto-ignition, diffusion-assisted ignition, and extinction, are employed to quantify interactions between local diffusion and chemical processes in complex turbulent fields. The capability of CEMA-based local modes in extinction detection is first demonstrated in a one-dimensional non-premixed flamelet undergoing transient extinction. Flame structure and dynamics in the gas turbine combustor are then examined in detail using CEMA and the local combustion modes for both the stably burning and lean blowout conditions. Local structure comprised of all the three modes are identified, and each mode is found to play an important role in determining the overall burning rate. The heat release rate attributed to each local mode remains nearly constant at the stably burning condition. In contrast, the flame during LBO shows a two-stage extinction behavior: at the initial stage, the extinction mode is largely enhanced and becomes dominant over the assisted-ignition model; at the second stage, all three modes are suppressed, signifying global extinction. It is therefore suggested that the excessive local extinction mode, due to an increased amount of heat and radical losses through diffusion, finally leads to lean flame blowout.

chemical explosive mode↗

HIGH-FIDELITY SIMULATION OF SOOT FORMATION AND THERMAL RADIATION IN A LABORATORY-SCALE RICH-QUENCH-LEAN BURNER

High-fidelity simulations of a swirl-stabilized turbulent spray flame in a laboratory-scale aero-combustor have been performed to evaluate the predictability of state-of-the-art models in capturing soot formation. The simulations employ a complex chemical mechanism developed for Jet-A with PAH chemistry, coupled with the Hybrid Method of Moments (HMOM) soot model, and a Lagrangian dilute spray model for the fuel injection. Two simulations are performed to compare the results when thermal radiation is neglected or included in the solution with a mean spectral model. Modeling closures for the soot differential diffusion effects in mixture fraction space, as well as turbulence-radiation interaction are also evaluated using the data generated by the simulations. Given the degree of complexity of the simulation, the results showed good agreement with experimental measurements of the spatial distribution of the soot volume fraction ensemble average. A closer agreement with the experiment is observed when thermal radiation is included in the solution. Thermal radiation is observed to reduce the flame temperature and increase the flame intermittency, denoted by the increase in the temperature standard deviation in mixture fraction space. The reduction in temperature also leads to a reduction in PAH production and soot volume fraction. Turbulence is observed to have different effects on radiative emission depending on the mixture fraction. Turbulent scalar fluctuations significantly enhance radiative emission in fuel lean mixtures and can also play a role for fuel rich conditions. The statistical description of the turbulence-radiation interaction, previously proposed in the literature, was observed to correctly reproduce the high-fidelity results. Model coefficients were provided for swirl-stabilized flames. The soot differential diffusion model, previously proposed in the literature, based on the residual between the exact term and its model approximation, was also evaluated. The residual correction term further improved the agreement with exact differential diffusion term evaluated with the high-fidelity simulation data in mixture fraction space. The results suggest that the effective turbulent Lewis number can be equal to unity in simulations of turbulent non-premixed recirculating flames.

Soriano, Bruno [Sandia National Laboratories (SNL)↗

(Towards) DNS of a Laboratory Lean CH4/H2 Low-Swirl Flame Impinging on an Inclined Wall

Due to downsizing trends, flame-wall interaction (FWI) is increasingly prominent in gas turbines (GTs). FWI has direct consequences on flame stabilization and pollutant emissions, but it is not well understood in turbulent flows representative of GTs. We present results from a direct numerical simulation (DNS) of a turbulent CH4/H2 model GT low-swirl laboratory-scale flame interacting with an inclined wall. The results from the laboratory flame include simultaneous measurements of velocity using stereo particle imaging velocimetry and OHxCH2O planar laser induced fluorescence. The adaptive-mesh refinement solver PeleLMeX is used, with 24-species, 105-reaction reduced Aramco chemical kinetics mechanism. The premixed fuel-air mixture consists of hydrogen-enriched methane with 70% hydrogen volume fraction and 0.4 equivalence ratio. The inflow is prescribed to match experimental measurements at the burner exit. Karlovitz and turbulent Reynolds numbers are 300 and 400, respectively. The simulation and experimental results show excellent agreement. The flame features a bowl-shape stabilization, with a corrugated, continuous flame front at the leading edge, followed by fragmented reaction zones downstream. A large diffuse cloud of CH2O is formed downstream of the quenching point. The simulation results indicate that the cloud of CH2O is the result of incomplete methane combustion, with CH2O "leaking" from the locally quenched reaction zones.The DNS provides fine-grain resolution of turbulence-flame-wall interaction that cannot be captured with experimental measurements. With access to the entire solution vector at each cell of the computational domain, the local quenching.

flame-wall interactions↗

Analysis of ignition and stabilization modes in diesel spray flames using large eddy simulations and chemical explosive mode analysis

In this work, spray flames under diesel engine conditions are numerically investigated to understand the ignition and stabilization characteristics, based on state-of-the-art large eddy simulations (LES) and chemical explosive mode analysis (CEMA). In particular, CEMA is employed to identify such critical flame features as auto-ignition, premixed flame fronts, cool and strongly burning flames, and local extinction. In particular, a recently developed CEMA-based criterion for demarcating local combustion modes, that is, auto-ignition, diffusion-assisted ignition, and extinction, is applied to gain in-depth insights into the interactions of local chemical and transport processes. A series of one-dimensional non-premixed flamelets with varying air temperatures and scalar dissipation rates are first analyzed using CEMA with a focus on the role of each local mode in the transient ignition process. CEMA-based diagnostics are then applied to diesel spray flames at different ambient temperatures. The structure of local combustion modes is identified, while the contribution from each local mode to overall flame burning is quantified at different stages of the flame developing process. Effects of the ambient temperature on local combustion mode distribution, and subsequently on the ignition and stabilization mechanisms, are further examined. Results show that auto-ignition is the main mechanism for flame initiation and stabilization, while the role of diffusion is substantially enhanced as ambient temperature decreases.

assisted-ignition↗

Large Eddy simulation of the Sandia Flame series (D-F) using the Eulerian stochastic field method

Three turbulent piloted methane jet flames with increasing levels of local extinction (Sandia Flames D-F) have been computed using Large Eddy simulation. The smallest unresolved scales of the flow, in which combustion occurs, are represented using the filtered probability density function method where the corresponding evolution equation is solved directly. A dynamic model for the sub-grid stresses together with a simple gradient diffusion approximation for the scalar fluxes is applied in conjunction with the linear mean square estimation closure for sub-filter scale mixing. An augmented reduced mechanism (ARM) derived from the full GRI 3.0 mechanism is incorporated to describe the chemical reaction. The results demonstrate the ability of the method in capturing quantitatively finite rate effects such as extinction and re-ignition in turbulent flames. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spherical flame characteristics of heptane/iso-butanol mixture droplets

Experimental data and detailed numerical modelling are presented on the burning characteristics of a model gasoline/biofuel mixture consisting of n-heptane and iso-butanol. A droplet burning in an environment that minimises the influence of buoyant and forced convective flows in the standard atmosphere is used to promote one-dimensional gas transport to facilitate numerical modelling of the droplet burning process. The numerical model includes a detailed combustion kinetic mechanism, unsteady gas and liquid transport, multicomponent diffusion inside the droplet, variable properties, and non-luminous radiative heat transfer from the flame. The numerical simulation was validated by experimental measurements in the standard atmosphere which showed good agreement with the evolutions of droplet and flame diameters. The iso-butanol concentration had a strong effect on formation of particulates. Above ~20% (volume) iso-butanol, flame luminosity was significantly diminished anddecreased with increasing iso-butanol concentration, while CO2 emissions as a representative greenhouse gas were not strongly influenced by the iso-butanol loading. The soot shell was located near a 1350 K isotherm for concentrations up to 20% (volume) iso-butanol, suggesting this value as a possible soot inception temperature for the mixture droplet. The combustion rate decreased with increasing iso-butanol concentration which was attributed to iso-butanol's higher liquid density. No evidence of a low temperature burning regime, or of extinction, was found (in experiments and simulations) for the small droplet sizes investigated.

Dalili, Alireza↗

Flame tolerant secondary fuel nozzle

A combustor for a gas turbine engine includes a plurality of primary nozzles configured to diffuse or premix fuel into an air flow through the combustor; and a secondary nozzle configured to premix fuel with the air flow. Each premixing nozzle includes a center body, at least one vane, a burner tube provided around the center body, at least two cooling passages, a fuel cooling passage to cool surfaces of the center body and the at least one vane, and an air cooling passage to cool a wall of the burner tube. The cooling passages prevent the walls of the center body, the vane(s), and the burner tube from overheating during flame holding events.

33 ADVANCED PROPULSION SYSTEMS↗

DNS of spark ignition and edge flame propagation in turbulent droplet-laden mixing layers

A parametric study of forced ignition at the mixing layer between air and air carrying fine monosized fuel droplets is done through one-step chemistry direct numerical simulations to determine the influence of the size and volatility of the droplets, the spark location, the droplet-air mixing layer initial thickness and the turbulence intensity on the ignition success and the subsequent flame propagation. The propagation is analyzed in terms of edge flame displacement speed, which has not been studied before for turbulent edge spray flames. Spark ignition successfully resulted in a tribrachial flame if enough fuel vapour was available at the spark location, which occurred when the local droplet number density was high. Ignition was achieved even when the spark was offset from the spray, on the air side, due to the diffusion of heat from the spark, provided droplets evaporated rapidly. Large kernels were obtained by sparking close to the spray, since fuel was more readily available. At long times after the spark, for all flames studied, the probability density function of the displacement speed was wide, with a mean value in the range 0.55-0.75S{sub L}, with S{sub L} the laminar burning velocity of a stoichiometric gaseous premixed flame. This value is close to the mean displacement speed in turbulent edge flames with gaseous fuel. The displacement speed was negatively correlated with curvature. The detrimental effect of curvature was attenuated with a large initial kernel and by increasing the thickness of the mixing layer. The mixing layer was thicker when evaporation was slow and the turbulence intensity higher. However, high turbulence intensity also distorted the kernel which could lead to high values of curvature. The edge flame reaction component increased when the maximum temperature coincided with the stoichiometric contour. The results are consistent with the limited available experimental evidence and provide insights into the processes associated with ignition of practical spray flames. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A reduced thermal diffusion model for H and H 2

Here this work details the development of a new, reduced thermal diffusion model. The proposed model derives from the thermal diffusion model of Chapman and Cowling (1970). In its derivation, a set of mixture-averaged like approximations are made, which results in the number of operations being reduced from $\mathscr{O}$($\mathcal{n}^2$) to sub-linear, where n is the number of species in the chemical model. With these approximations, the new, reduced model thermal diffusion coefficients can be calculated independently for each species. The model is validated against multicomponent thermal diffusion cases using multiple fuel and diluent mixtures at various pressures, temperatures, and equivalence ratios. The resulting reduced model thermal diffusion fluxes agree well with the multicomponent values, with a multiplicative scaling factor identified using a least squares regression. Unstretched laminar flame speeds are compared using the multicomponent and newly developed models. Finally, an a posteriori comparison in a turbulent configuration shows excellent agreement of both the mean and fluctuations of the thermal diffusion coefficients.

42 ENGINEERING↗

Flame acceleration and transition to detonation in a pre-/main-chamber combustion system

Numerical simulations are performed to study the mechanism of deflagration to detonation transition (DDT) in a pre-/main-chamber combustion system with a stoichiometric ethylene–oxygen mixture. A Godunov algorithm, fifth-order in space, and third-order in time, is used to solve the fully compressible Navier–Stokes equations on a dynamically adapting mesh. A single-step, calibrated chemical diffusive model described by Arrhenius kinetics is used for energy release and conservation between the fuel and the product. The two-dimensional simulation shows that a laminar flame grows in the pre-chamber and then develops into a jet flame as it passes through the orifice. A strong shock forms immediately ahead of the flame, reflecting off the walls and interacting with the flame front. The shock–flame interactions are crucial for the development of flame instabilities, which trigger the subsequent flame development. The DDT arises due to a shock-focusing mechanism, where multiple shocks collide at the flame front. A chemical explosive mode analysis (CEMA) criterion is developed to study the DDT ignition mode. Preliminary one-dimensional computations for a laminar propagating flame, a fast flame deflagration, and a Chapman–Jouguet detonation are conducted to demonstrate the validity of CEMA on the chemical-diffusive model, as well as to determine the proper conditioning value for CEMA diagnostic. The two-dimensional analysis with CEMA indicates that the DDT initiated by the shock-focusing mechanism can form a strong thermal expansion region at the flame front that features large positive eigenvalues for the chemical explosive mode and dominance of the local autoignition mode. Thus, the CEMA criterion proposed in this study provides a robust diagnostic for identifying autoignition-supported DDT, of which the emergence of excessive local autoignition mode is found to be a precursor. The effect of grid size, initial temperature, and orifice size are then evaluated, and results show that although the close-chamber DDT is highly stochastic, the detonation initiation mechanism remains robust.

42 ENGINEERING↗

Integrating population connectivity into pollution assessment: Overwintering mixing reveals flame retardant contamination in breeding areas in a migratory raptor

Highlights: • This multidisciplinary study integrates population connectivity into pollution assessment. • Flame retardants in inviable eggs of black kites were assessed in two populations. • A much higher occurrence and concentration of flame retardants were found in Madrid than Doñana. • Kites from Western Europe showed a strong winter intermixing in Africa. • Diffuse migratory connectivity reveals breeding areas as the main contamination grounds. Determining the exposure and magnitude at which various pollutants are differentially assimilated at the breeding and non-breeding grounds of migratory wildlife is challenging. Here, the possibility of applying the migratory connectivity framework to understanding contamination in birds is illustrated by considering flame retardants in inviable eggs of a migratory raptor, the black kite (Milvus migrans). The occurrence and concentration of legacy and emerging compounds in eggs from the southeastern peri-urban area of Madrid city, central Spain, were compared with those from Doñana National Park in southern Spain. A much higher occurrence and concentration of multiple polybrominated diphenyl ethers and Dechlorane 602 were found in Madrid than Doñana, but the opposite patterns were found for Dechlorane Plus. Individuals from these and other breeding areas in western Europe showed a strong intermixing pattern over widespread wintering areas in Africa, as assessed by ringing recoveries and movements tracked by satellite devices. This diffuse migratory connectivity reveals breeding areas as the main contamination grounds. High contamination burdens sequestered in eggs point to rapid assimilation of these compounds before laying, associated with important emission sources in Madrid, especially landfills of partially incinerated urban refuse, and other anthropogenic operations. Diet composition regarding aquatic vs. terrestrial prey, and bioaccumulation and biomagnification processes are suggested to explain differential assimilation of some compounds, especially Dechlorane Plus in Doñana, although a local emission source polluting this area cannot be ruled out. Insight from the migratory connectivity framework can help to disentangle large-scale patterns of contaminant uptake and refocus attention on key regions and potential causes of chemical hazards in declining migratory species and human populations.

54 ENVIRONMENTAL SCIENCES↗

Experimental and numerical investigation of ester droplet combustion: Application to butyl acetate

This paper presents an experimental and numerical study of the combustion of isolated n–butyl acetate droplets in the standard atmosphere. Numerical simulations are reported using a model that incorporates unsteady gas and liquid transport, variable properties, and radiation. Three skeletal mechanisms of n-butyl acetate, derived from a large detailed mechanism comprised of 819 species and 52,698 reactions, were used in the numerical simulations to evaluate the influence of the kinetic mechanism on burning. The reduced mechanisms comprised 212 species and 5413 reactions, 157 species and 3089 reactions, and 105 species and 1035 reactions. The numerical model did not include soot formation, though qualitatively mild sooting was noted only for droplets larger than 0.7 mm. The numerical predictions were in good agreement with experimental measurements of droplet and flame diameters. Flame extinction was numerically predicted which was attributed to a decrease of the characteristic diffusion time relative to the chemical time as droplet burned. Effects of initial droplet diameter on the evolution of maximum gas temperature (T max ) and peak mole fractions of CO 2 and CO are also examined numerically.

09 BIOMASS FUELS↗

On the combustion of n-butyl acetate droplets

This paper presents an experimental and numerical study of the combustion of isolated n‑butyl acetate droplets in the standard atmosphere. Numerical simulations are reported using a model that incorporates unsteady gas and liquid transport, variable properties, and radiation. Three skeletal mechanisms of n‑butyl acetate, derived from a large detailed mechanism comprised of 819 species and 52,698 reactions, were used in the numerical simulations to evaluate the influence of the kinetic mechanism on burning. The reduced mechanisms comprised 212 species and 5413 reactions, 157 species and 3089 reactions, and 105 species and 1035 reactions. The numerical model did not include soot formation, though qualitatively mild sooting was noted only for droplets larger than 0.7 mm. The numerical predictions were in good agreement with experimental measurements of droplet and flame diameters. Flame extinction was numerically predicted which was attributed to a decrease of the characteristic diffusion time relative to the chemical time as droplet burned. Effects of initial droplet diameter on the evolution of maximum gas temperature (Tmax) and peak mole fractions of CO2 and CO are also examined numerically.

09 BIOMASS FUELS↗

3D simulations of spinlike flames in Co/Al multilayers with enhanced conduction losses

Reactive Co/Al multilayers are uniformly structured materials that may be ignited to produce rapid and localized heating. Prior studies varying the bilayer thickness (i.e., sum of two individual layers of Co and Al) have revealed different types of flame morphologies, including: (a) steady/planar, (b) wavy/periodic, and (c) transverse bands, originating in the flame front. These instabilities resemble the “spin waves” first observed in the early studies of solid combustion (i.e., Ti cylinder in a N 2 atmosphere), and are likewise thought to be due to the balance of heat released by reaction and heat conduction forward into the unreacted multilayer. However, the multilayer geometry and three-dimensional (3D) edge effects are relatively unexplored. In this work, a new diffusion-limited reaction model for Co/Al multilayers was implemented in large, novel 3D finite element analysis (FEA) simulations, in order to study the origins of these spinlike flames. This reaction model builds upon previous work by introducing three new phase-dependent property models for: (1) the diffusion coefficient, (2) anisotropic thermal conductivity tensor, and (3) bulk heat capacity, as well as one additional model for the bilayer-dependent heat of reaction. These novel 3D simulations are the first to predict both steady and unsteady flames in Co/Al multilayers. Moreover, two unsteady modes of flame propagation are identified, which depend on the enhanced conduction losses with slower flames, as well as flame propagation around notched edges. Finally, future work will consider the generality of the current modeling approach and also seek to define a more generalized set of stability criteria for additional multilayer systems.

42 ENGINEERING↗