SEARCH · Engineering Papers

Results for “design augmentation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Large-scale wind tunnel studies of a jet-engined powered ejector-lift STOVL aircraft

A full-scale model of a supersonic STOVL single engine flighter aircraft employing an ejector to augment lift in hover and in low-speed flight was tested in the 40- by 80-ft and 80- by 120-ft test sections of the National Full-Scale Aerodynamics Complex located at the NASA Ames Research Center. The measured ejector augmentation ratio in hover met the design requirement of 1.6 and continued to provide the lift necessary in forward flight for good transition qualities. The up-and-away aerodynamics (ejector system stowed) were found to be conventional for this class of vehicle. The pitch control provided by the full-span blown flaps is sufficient to control the large pitching moments generated by ventral exhaust nozzle vectoring and propulsion induced aerodynamic effects such as the turning of the flow entrained into the ejectors.

Dudley, Michael R.↗

NASA NTRS1993

Augmented thermal bus

The present invention is directed to an augmented thermal bus. In the present design a plurity of thermo-electric heat pumps are used to couple a source plate to a sink plate. Each heat pump is individually controlled by a model based controller. The controller coordinates the heat pump to maintain isothermality in the source.

Schrage, Dean S.↗

NASA NTRS1995

Stable H(infinity) Controller Design for the Longitudinal Dynamics of an Aircraft

This report discusses different approaches to stable H infinity controller design applied to the problem of augmenting the longitudinal dynamics of an aircraft. Stability of the H infinity controller is investigated by analyzing the effects of changes in the performance index weights, and modifications in the measured outputs. The existence of a stable suboptimal controller is also investigated. It is shown that this is equivalent to finding a stable controller, whose infinity norm is less than a specified bound, for an unstable plant which is determined from parametrization of all H infinity controllers. Examples are given for a gust alleviation and a command tracking problem.

Oezbay, Hitay↗

NASA NTRS1996

Augmented Thermal Bus

The present invention is directed to an augmented thermal bus. In the present design a plurality of thermo-electric heat pumps are used to couple a source plate to a sink plate. Each heat pump is individually controlled by a model based controller. The controller coordinates the heat pumps to maintain isothermality in the source.

Schrage, Dean S.↗

NASA NTRS1990

NASA/University Technology Cooperation

NASA is extensively engaged in cooperative technology development efforts with the nation's research universities. An example of NASA/university cooperation is the work of the Space Technology Center at the University of Kansas (KU) and the KU Center for Research, Inc. (CRINC). Directed by Professor Bill G. Barr, the Space Technology Center is one of 27 interdisciplinary centers established as part of a NASA plan to set up a network of advanced facilities across the nation. Since 1981 CRINC has been involved in a technology transfer program supported by the NASA Technology Utilization Division and by industry. The objective of the technology transfer program is to encourage industrial innovation through utilization of NASA technology through improved industry/university cooperation. At KU, research is conducted by the Industrial Innovation Laboratory and the Computer Integrated Manufacturing Laboratory which utilize graduate students in engineering and computer science as research assistants. A new project of the Space Technology Center is one designed to advance NASA objectives in "augmented telerobotics." A telerobot is programmed to respond to commands from a human operator, or to mimic the movements of its human operator. The project is being conducted under the guidance of Langley Research Center.

Source record↗

NASA NTRS1952

Thrust Augmentation of a Turbojet Engine at Simulated Flight Conditions by Introduction of a Water-Alcohol Mixture into the Compressor

An investigation was conducted at simulated high-altitude flight conditions to evaluate the use of compressor evaporative cooling as a means of turbojet-engine thrust augmentation. Comparison of the performance of the engine with water-alcohol injection at the compressor inlet, at the sixth stage of the compressor, and at the sixth and ninth stages was made. From consideration of the thrust increases achieved, the interstage injection of the coolant was considered more desirable preferred over the combined sixth- and ninth-stage injection because of its relative simplicity. A maximum augmented net-thrust ratio of 1.106 and a maximum augmented jet-thrust ratio of 1.062 were obtained at an augmented liquid ratio of 2.98 and an engine-inlet temperature of 80 F. At lower inlet temperatures (-40 to 40 F), the maximum augmented net-thrust ratios ranged from 1.040 to 1.076 and the maximum augmented jet-thrust ratios ranged from 1.027 to 1.048, depending upon the inlet temperature. The relatively small increase in performance at the lower inlet-air temperatures can be partially attributed to the inadequate evaporation of the water-alcohol mixture, but the more significant limitation was believed to be caused by the negative influence of the liquid coolant on engine- component performance. In general, it is concluded that the effectiveness of the injection of a coolant into the compressor as a means of thrust augmentation is considerably influenced by the design characteristics of the components of the engine being used.

Useller, James W.↗

NASA NTRS1994

Augmented thermal bus wih multiple thermoelectric devices individually controlled

Schrage, Dean S.↗

NASA NTRSDate not supplied

Realizing a Spacesuit Compatible Augmented Reality System to Meet the Work Needs of Future Human Spaceflight Exploration

In this paper, we identify the broad range of challenges associated with creating an augmented reality for future spaceflight missions. The challenges were framed within a sociotechnical framework to explore how an imagined augmented reality system might one day help crew cope with future exploration mission demands. Key challenges include an augmented reality system cannot simply be designed to help a single suited astronaut and must enable the broader mission team. There exists a host of optical, compute, and control technical challenges that must be simultaneously addressed while the work domain itself is in development. There exist limited methods to help cope with the envisioned world problem; however, we emphasize a few strategies to articulate work design assumptions and host this detail in a transparent fashion. Finally, we note the broader organizational constraints that shape the creation of such novel technology for spaceflight. By addressing these broad range of challenges directly, early in the design and development process, key trade-offs can be considered and fundamental concerns within the community can be addressed to yield desired mission outcomes.

Matthew J. Miller↗

NASA NTRS1983

Vortex Lift Augmentation by Suction

Lift performance is improved on a 60 degrees swept Gothic wing. Vortex lift at moderate to high angles of attack on highly swept wings used to improve takeoff performance and maneuverability. New design proposed in which suction of propulsion system augments vortex. Turbofan placed at down stream end of leading-edge vortex system induces vortex to flow into inlet which delays onset of vortex breakdown.

Taylor, A. H.↗

NASA NTRS1987

Design and numerical evaluation of full-authority flight control systems for conventional and thruster-augmented helicopters employed in NOE operations

The development and methodology is presented for development of full-authority implicit model-following and explicit model-following optimal controllers for use on helicopters operating in the Nap-of-the Earth (NOE) environment. Pole placement, input-output frequency response, and step input response were used to evaluate handling qualities performance. The pilot was equipped with velocity-command inputs. A mathematical/computational trajectory optimization method was employed to evaluate the ability of each controller to fly NOE maneuvers. The method determines the optimal swashplate and thruster input histories from the helicopter's dynamics and the prescribed geometry and desired flying qualities of the maneuver. Three maneuvers were investigated for both the implicit and explicit controllers with and without auxiliary propulsion installed: pop-up/dash/descent, bob-up at 40 knots, and glideslope. The explicit controller proved to be superior to the implicit controller in performance and ease of design.

Perri, Todd A.↗

NASA NTRS1981

Selected advanced aerodynamic and active control concepts development

A task for the Energy Efficient Transport program conducted: (1) The design and wind tunnel development of high-aspect-ratio supercritical wings, investigating the cruise speed regime and also high-lift. (2) The preliminary design and evaluation of an aircraft combining a high-aspect-ratio supercritical wing with a winglet. (3) Active Controls: The determination of criteria, configuration, and flying qualities associated with augmented longitudinal stability of a level likely to be acceptable for the next generation transport; and the design of a practical augmentation system. The baseline against which the work was performed and evaluated was the Douglas DC-X-200 twin engine derivative of the DC-10 transport. The supercritical wing development showed that the cruise and buffet requirements could be achieved and that the wing could be designed to realize a sizable advantage over today's technology. Important advances in high lift performance were shown. The design study of an aircraft with supercritical wing and winglet suggested advantages in weight and fuel economy could be realized. The study of augmented stability, conducted with the aid of a motion base simulator, concluded that a negative static margin was acceptable for the baseline unaugmented aircraft.

Source record↗

NASA NTRS1992

An intelligent control and virtual display system for evolutionary space station workstation design

Research and development of the Advanced Display and Computer Augmented Control System (ADCACS) for the space station Body-Ported Cupola Virtual Workstation (BP/VCWS) were pursued. The potential applications were explored of body ported virtual display and intelligent control technology for the human-system interfacing applications is space station environment. The new system is designed to enable crew members to control and monitor a variety of space operations with greater flexibility and efficiency than existing fixed consoles. The technologies being studied include helmet mounted virtual displays, voice and special command input devices, and microprocessor based intelligent controllers. Several research topics, such as human factors, decision support expert systems, and wide field of view, color displays are being addressed. The study showed the significant advantages of this uniquely integrated display and control system, and its feasibility for human-system interfacing applications in the space station command and control environment.

Feng, Xin↗

NASA NTRS1980

Flight software requirements and design support system

The desirability and feasibility of computer-augmented support for the pre-implementation activities occurring during the development of flight control software was investigated. The specific topics to be investigated were the capabilities to be included in a pre-implementation support system for flight control software system development, and the specification of a preliminary design for such a system. Further, the pre-implementation support system was to be characterized and specified under the constraints that it: (1) support both description and assessment of flight control software requirements definitions and design specification; (2) account for known software description and assessment techniques; (3) be compatible with existing and planned NASA flight control software development support system; and (4) does not impose, but may encourage, specific development technologies. An overview of the results is given.

Riddle, W. E.↗

NASA NTRS2011

Percussive Augmenter of Rotary Drills (PARoD)

A percussive augmenter is being developed and it is designed to add ultrasonic hammering to a conventional commercial rotary drill through an adapter using a piezoelectric actuator. The combination of ultrasonic hammering and rotation creates a drill that requires low power and low axial load while providing faster penetration than conventional rotary-only drills. These characteristics make percussive augmentation of rotary drills ideal for not only planetary exploration but commercial applications as well. The purpose of this internship was to produce, test, and optimize an augmenter that drives a 2 inch diameter bit. This task was part of the percussive augmenter's phase II of an ongoing contract and it involved increasing the capability of the .25 inch version of the augmenter prototype that was developed in phase I. Due to fabrication delays of the augmenter, an extensive part of the test effort was conducted using previous rotary and hammer drill prototypes. These tests focused on drilling deep over long periods of time to provide for effective stress test of the drill. Modifications were made to the drill, its components, and the testing procedure to achieve desired borehole depths. These results were used to start initial testing on the 2 inch augmenter and provide preliminary data on the augmenter's ability to significantly improve penetration rate over conventional rotary-only drills.

rotraty hammer↗

NASA NTRS1979

An overview of current Navy programs to develop thrust augmenting ejectors

The primary objective of Navy sponsored research in thrust augmentation is the development of an improved augmenter for V/STOL application. In support of this goal, a data base is being established to provide an accurate prediction capability for use in ejector design. A general technology development of ejectors and associated effects presently is split into the more specific areas of lift and control, since thrust augmenting ejectors may be suitable for both. Research areas examined include advanced diffuser and end wall design; advanced primary nozzles; analytic studies; augmenting reaction controls; and nozzle design.

Green, K. A.↗

NASA NTRS2015

Flight Envelope Information-Augmented Display for Enhanced Pilot Situation Awareness

This paper presents an interface system display which is conceived to improve pilot situation awareness with respect to a flight envelope protection system developed for a mid-sized transport aircraft. The new display is designed to complement existing cockpit displays, and to augment them with information that relates to both aircraft state and the control automation itself. In particular, the proposed display provides cues about the state of automation directly in terms of pilot control actions, in addition to flight parameters. The paper also describes a forthcoming evaluation test plan that is intended to validate the developed interface by assessing the relevance of the displayed information, as well as the adequacy of the display layout.

Ackerman, Kasey A.↗

NASA NTRS1981

Control augmentation for lateral control wheel steering

Flight control system design for lateral control wheel steering is discussed. Two alternate designs are presented. The first design is a roll-rate command, bank-angle hold system with a wings-level track-hold submode. The second is a curved-track-hold system. Design details and real-time flight simulator results are included.

Foulkes, R. H., Jr.↗

NASA NTRS1982

Unified results of several analytical and experimental studies of helicopter handling qualities in visual terrain flight

The studies were undertaken to investigate the effects of rotor design parameters, interaxis coupling, and various levels of stability and control augmentation on the flying qualities of helicopters performing low-level, terrain-flying tasks in visual meteorological conditions. Some unified results are presented, and the validity and limitations of the flying-qualities data obtained are interpreted. Selected results, related to various design parameters, provide guidelines for the preliminary design of rotor systems and aircraft augmentation systems.

Chen, R. T. N.↗