Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Effect of loading path on grain misorientation and geometrically necessary dislocation density in polycrystalline aluminum under reciprocating shear

Solid phase processing (SPP) is a promising alloy fabrication technique to produce fine and homogeneous grain structures for high-performance alloys. However, there is very limited modeling capability to understand and predict the grain refinement during SPP. In this work, the crystal plasticity theory was used to study elastic-plastic deformation in polycrystalline aluminums under large shear deformation. Two approaches, kernel averaged misorientation (KAM) and grain reference orientation deviation (GROD), were used to assess the grain misorientations. The geometrically necessary dislocation (GND) density was computed with the plastic strain rate. The deformation simulations were carried out under two loading conditions to investigate the effect of loading paths on the evolutions of grain misorientation and GND density. The results show that the regions with high misorientation and GND density first appear near grain boundaries. These regions then extend toward interior grains. The loading path affects dislocation system activation and dislocation recovery, hence dislocation evolution and misorientation. In conclusion, both two- and three-dimensional simulations showed that the spatial and temporal evolutions of GROD, KAM, and GND density in are closely correlated, which indicates they all can be used as criteria of grain refinement or recrystallization.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Spectral density reconstruction with Chebyshev polynomials

Accurate calculations of the spectral density in a strongly correlated quantum many-body system are of fundamental importance to study its dynamics in the linear response regime. Typical examples are the calculation of inclusive and semiexclusive scattering cross sections in atomic nuclei and transport properties of nuclear and neutron star matter. Integral transform techniques play an important role in accessing the spectral density in a variety of nuclear systems. However, their accuracy is in practice limited by the need to perform a numerical inversion which is often ill-conditioned. Here, in the present work we extend a recently proposed quantum algorithm which circumvents this problem. We show how to perform controllable reconstructions of the spectral density over a finite energy resolution with rigorous error estimates. An appropriate expansion in Chebyshev polynomials allows for efficient simulations also on classical computers. We apply our idea to obtain the local density of states for graphene in a magnetic field as a proof of principle. This paves the way for future applications in nuclear and condensed matter physics.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Impact of Platinum Primary Particle Loading on Fuel Cell Performance: Insights from Catalyst/Ionomer Ink Interactions

A variety of electrochemical energy conversion technologies, including fuel cells, rely on solution-processing techniques (via inks) to form their catalyst layers (CLs). The CLs are heterogeneous structures, often with uneven ion-conducting polymer (ionomer) coverage and underutilized catalysts. Various platinum-supported-on-carbon colloidal catalyst particles are used, but little is known about how or why changing the primary particle loading (PPL, or the weight fraction of platinum of the carbon-platinum catalyst particles) impacts performance. Here, by investigating the CL gas-transport resistance and zeta-potentials of the corresponding inks as a function of PPL, a direct correlation between the CL high current density performance and ink zeta-potential is observed. This correlation stems from likely changes in ionomer distributions and catalyst-particle agglomeration as a function of PPL, as revealed by pH, zeta-potential, and impedance measurements. These findings are critical to unraveling the ionomer distribution heterogeneity in ink-based CLs and enabling enhanced Pt utilization and improved device performance for fuel cells and related electrochemical devices.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Imaging quantum melting in a disordered 2D Wigner solid

Two-dimensional strongly interacting electrons crystalize into a solid phase known as the Wigner crystal at low densities and form a Fermi liquid at high densities. At intermediate densities, the two-dimensional solid evolves into a strongly correlated liquid phase around a critical density. We observed this quantum melting of a disordered Wigner solid in bilayer molybdenum diselenide (MoSe2) using a noninvasive scanning tunneling microscopy imaging technique. At low densities, the Wigner solid forms nanocrystalline domains pinned by local disorder. It exhibits a quantum densification behavior with increased densities in the solid phase. Above a threshold density, the Wigner solid melts locally and enters a mixed phase in which solid and liquid regions coexist. The liquid regions expand and form a percolation network at even higher densities.

Xiang, Ziyu↗
DOE OSTI2021

Spatiotemporal mapping of mesoscopic liquid dynamics

The study of liquid dynamics at mesoscopic scales is still strewn with difficulty due to limitations in theory and experiment. Historically, significant attention has been given to the analysis of space-time correlation functions and their frequency-Fourier transforms at a few discrete wave numbers. The massive computing power afforded by modern high performance computing clusters and the advent of a wide-angle neutron spin-echo spectrometer, however, have unlocked a more intuitive and fruitful approach to this problem. Using molecular dynamics simulations, here we demonstrate the benefits of spatiotemporally mapping intermediate scattering functions on a dense grid of correlation times and wave numbers. Four model systems are investigated: a Lennard-Jones liquid, a coarse-grained bead-spring polymer, a molten sodium chloride, and a poly(ethylene oxide) melt. We show that the spatiotemporal mapping approach is particularly useful for elucidating the mesoscopic dynamics in these liquids, where several underlying mechanisms, such as molecular relaxations, hydrodynamic modes, and nonhydrodynamic excitations, are potentially at play. Therefore, compared to the traditional method, direct visualization of density space-time correlation functions on two-dimensional color maps permits appraisals of complicated dynamical behavior at mesoscales in a global manner. For example, the scaling relations between space and time for different types of molecular motions can be straightforwardly identified on these plots, without any model-dependent analysis. Additionally, we show how theoretical ideas regarding collective mesoscopic dynamics, such as the classical hydrodynamic theory, the convolution approximation, and a recently proposed phenomenological model, can be discussed in terms of the global features of spatiotemporal maps of intermediate scattering functions. The new perspective offered by the spatiotemporal mapping method should prove useful for the study of liquid dynamics in general.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Dynamical correlations and nonequilibrium sum rules in photodoped Hubbard ladders

Using matrix product state techniques we study the nonequilibrium dynamical response of the half-filled Hubbard ladder when subject to an optical pump. Optical pumping offers a way of producing and manipulating new strongly correlated phenomena by suppressing existing magnetic correlations. The ladder allows the effects of pump directionality to be investigated, and compared to a single chain it has strong spin-charge coupling and a fully gapped excitation spectrum, promising different nonequilibrium physics. We compute time-dependent correlations, including the nonequilibrium dynamical structure factors for spin and charge. By deriving a combined spin-charge sum rule that applies both in and out-of-equilibrium, we show that spectral weight is pumped directly from the antiferromagnetic spin response into a low energy 𝜔 ∼ 0 charge response below the Mott gap. The transfer of weight is pump direction dependent: pumping directed along the legs disrupts magnetic correlations more than pumping in the rung-direction, even if the post-pump energy density is similar. The charge correlation length is dramatically enhanced by the pump, whilst the spin correlations are most strongly suppressed at nearest- and next-nearest-neighbor spacings. After the pump the system is in a nonthermal correlated metallic state, with gapless charge excitations and approximately equal spin and charge correlation lengths, emphasizing the importance of treating these degrees of freedom on an equal footing in nonequilibrium systems.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Inhomogeneous high temperature melting and decoupling of charge density waves in spin-triplet superconductor UTe 2

Charge, spin and Cooper-pair density waves have now been widely detected in exotic superconductors. Understanding how these density waves emerge — and become suppressed by external parameters — is a key research direction in condensed matter physics. Here we study the temperature and magnetic-field evolution of charge density waves in the rare spin-triplet superconductor candidate UTe 2 using scanning tunneling microscopy/spectroscopy. We reveal that charge modulations composed of three different wave vectors gradually weaken in a spatially inhomogeneous manner, while persisting to surprisingly high temperatures of 10–12 K. We also reveal an unexpected decoupling of the three-component charge density wave state. Our observations match closely to the temperature scale potentially related to short-range magnetic correlations, providing a possible connection between density waves observed by surface probes and intrinsic bulk features. Importantly, charge density wave modulations become suppressed with magnetic field both below and above superconducting T c in a comparable manner. Our work points towards an intimate connection between hidden magnetic correlations and the origin of the unusual charge density waves in UTe 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Exact and Model Exchange-Correlation Potentials for Open-Shell Systems

The conventional approaches to the inverse density functional theory problem typically assume nondegeneracy of the Kohn–Sham (KS) eigenvalues, greatly hindering their use in open-shell systems. Here, we present a generalization of the inverse density functional theory problem that can seamlessly admit degenerate KS eigenvalues. Additionally, we allow for fractional occupancy of the Kohn–Sham orbitals to also handle noninteracting ensemble-v-representable densities, as opposed to just noninteracting pure-v-representable densities. We present the exact exchange-correlation (XC) potentials for six open-shell systems–four atoms (Li, C, N, and O) and two molecules (CN and CH 2 )–using accurate ground-state densities from configuration interaction calculations. We compare these exact XC potentials with model XC potentials obtained using nonlocal (B3LYP, SCAN0) and local/semilocal (SCAN, PBE, PW92) XC functionals. Although the relative errors in the densities obtained from these DFT functionals are of $O$(10 –3 to 10 –2 ), the relative errors in the model XC potentials remain substantially large–$O$(10 –1 to 10 0 ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Metal Chalcogenides for Neuromorphic Computing: Emerging Materials and Mechanisms

The approaching end of Moore's Law scaling has significantly accelerated multiple fields of research including neuromorphic-, quantum-, and photonic computing, each of which possesses unique benefits unobtained through conventional binary computers. One of the most compelling arguments for neuromorphic computing systems is power consumption, noting that computations made in the human brain are approximately 106 times more efficient than conventional CMOS logic. This review article focuses on the materials science and physical mechanisms found in metal chalcogenides that are currently being explored for use in neuromorphic applications. We begin by reviewing the key biological signal generation and transduction mechanisms within neuronal components of mammalian brains and subsequently compare with observed experimental measurements in chalcogenides. With robustness and energy efficiency in mind, we will focus on short-range mechanisms such as structural phase changes and correlated electron systems that can be driven by low-energy stimuli, such as temperature or electric field. We aim to highlight fundamental materials research and existing gaps that need to be overcome to enable further integration or advancement of metal chalcogenides for neuromorphic systems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Evidence for Ga clusters in β-Ga 2 O 3 from Raman spectroscopy and density functional theory

Monoclinic gallium oxide (β-Ga 2 O 3 ) single crystals have a Raman mode at ∼250 cm −1 that is strongly correlated with free-electron density. Prior work attributed this peak to an electronic excitation of a shallow donor impurity band. However, heavily n-type thin films grown by metalorganic chemical vapor deposition or molecular beam epitaxy do not have the peak. In the present work, an alternate model is proposed: the 250 cm −1 Raman peak arises from Ga clusters, defined as two or more Ga atoms that form Ga–Ga bonds. Raman mapping reveals variations in the frequency that are consistent with a distribution of cluster sizes. The intensity of the peak decreases as the temperature is raised, attributed to melting of the Ga clusters. First-principles calculations indicate that the 250 cm −1 mode is due to Ga–Ga bond-stretching vibrations. As the Fermi energy is raised, the formation of Ga–Ga dimers becomes energetically favorable, explaining the correlation between n-type conductivity and the appearance of the Raman peak.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Validation of IMEP on Alcator C-Mod and JET-ILW ELMy H-mode plasmas

Abstract The recently developed integrated model based on engineering parameters (IMEP) (Luda et al 2020 Nucl. Fusion 61 126048; Luda et al 2021 Nucl. Fusion 60 036023), so far validated on ASDEX Upgrade, has been tested on a database of 3 Alcator C-Mod and 55 JET-ILW ELMy (type I) H-mode stationary phases. The empirical pedestal transport model included in IMEP, consisting now of imposing a fixed value of R < ∇ T e > / T e , t o p = − 82.5 , allows an accurate prediction of the pedestal top temperature (when the pedestal top density is fixed to the experimental measurements) across these three machines with different sizes, when the pedestal is peeling–ballooning (PB) limited. Cases far from the ideal PB boundary, corresponding to high edge Spitzer resistivity, are instead strongly overpredicted by IMEP. A comparison between the predictions of Europed and IMEP for a subset of JET-ILW cases shows that IMEP can more accurately reproduce the experimental pedestal width. This allows IMEP to better capture profile effects on the pedestal stability, and therefore to correctly describe the negative effect of fueling on the pedestal pressure for PB limited cases. A strong correlation between the separatrix density and the fueling rate has been identified for a subset of JET-ILW cases, when taking into account different divertor configurations. Overall, these promising results encourage further developments of integrated models to obtain reliable predictions of pedestal and global confinement using only engineering parameters for present and future machines.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Pt-Ligand single-atom catalysts: tuning activity by oxide support defect density

The support–metal interaction is an important element of heterogeneous catalyst design and is particularly critical for the rapidly growing field of single-atom catalysts (SACs). In this work, we investigate the impact of varying the defect density of the titania support on metal–organic Pt SACs for hydrosilylation reactions. Pt SACs are decorated on the powder titania support, employing a metal–ligand interaction with a dipyridyl-tetrazine ligand (DPTZ). The single-atom nature of Pt is verified by X-ray absorption spectroscopy (XAS) on both pristine and defective titania surfaces. These Pt species have a +2 oxidation state and are stabilized by bonding with DPTZ, surface oxygen, and residual chloride from the metal precursor. The catalytic activity is evaluated for the alkene hydrosilylation reaction and it is discovered that the activity of Pt-ligand is positively correlated with the defect density of the titania support. The turn-over number (TON) is calculated to be 12 530 for Pt SACs on a defective surface, which is significantly higher than Pt SACs on a pristine titania surface (830) for the same reaction period (10 min) under the same conditions (70 °C). We ascribe the high activity of Pt SACs on defective titania surfaces to two aspects: the coordination of Pt with more chloride than on pristine titania surfaces, which shortens the induction period of the reaction, and the preferential dispersion of Pt–DPTZ units on defective regions of titania surfaces, allowing facile contact between Pt sites and reactants. The supported Pt–DPTZ SACs show high stability through multiple cycles of batch reactions. This work demonstrates an efficient approach to improve the activity and stability of SACs by optimizing the metal–support interaction, which can also be applied to other oxide surfaces to further develop next-generation heterogeneous single-atom catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Quantum-classical hybrid algorithm for the simulation of all-electron correlation

While chemical systems containing hundreds to thousands of electrons remain beyond the reach of quantum devices, hybrid quantum-classical algorithms present a promising pathway toward a quantum advantage. Hybrid algorithms treat the exponentially scaling part of the calculation-the static correlation-on the quantum computer and the non-exponentially scaling part-the dynamic correlation-on the classical computer. While a variety of algorithms have been proposed, the dependence of many methods on the total wave function limits the development of easy-to-use classical post-processing implementations. Here, we present a novel combination of quantum and classical algorithms, which computes the all-electron energy of a strongly correlated molecular system on the classical computer from the 2-electron reduced density matrix (2-RDM) evaluated on the quantum device. Significantly, we circumvent the wave function in the all-electron calculations by using density matrix methods that only require input of the statically correlated 2-RDM. Although the algorithm is completely general, we test it with two classical density matrix methods, the anti-Hermitian contracted Schrödinger equation (ACSE) and multiconfiguration pair-density functional theories, using the recently developed quantum ACSE method for simulating the statically correlated 2-RDM. Furthermore, we obtain experimental accuracy for the relative energies of all three benzyne isomers and thereby demonstrate the ability of the developed algorithm to achieve chemically relevant and accurate results on noisy intermediate-scale quantum devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

On the three-dimensional spatial correlations of curved dislocation systems

Abstract Coarse-grained descriptions of dislocation motion in crystalline metals inherently represent a loss of information regarding dislocation-dislocation interactions. In the present work, we consider a coarse-graining framework capable of re-capturing these interactions by means of the dislocation-dislocation correlation functions. The framework depends on a convolution length to define slip-system-specific dislocation densities. Following a statistical definition of this coarse-graining process, we define a spatial correlation function which will allow the arrangement of the discrete line system at two points—and thus the strength of their interactions at short range—to be recaptured into a mean field description of dislocation dynamics. Through a statistical homogeneity argument, we present a method of evaluating this correlation function from discrete dislocation dynamics simulations. Finally, results of this evaluation are shown in the form of the correlation of dislocation densities on the same slip-system. These correlation functions are seen to depend weakly on plastic strain, and in turn, the dislocation density, but are seen to depend strongly on the convolution length. Implications of these correlation functions in regard to continuum dislocation dynamics as well as future directions of investigation are also discussed.

Anderson, Joseph Pierre (ORCID:0000000329760903)↗
DOE OSTI2023

Dynamics of multilayer Rayleigh–Taylor instability at moderately high Atwood numbers

This paper investigates the multilayer Rayleigh–Taylor instability (RTI) using statistically stationary experiments conducted in a gas tunnel. Employing diagnostics such as particle image velocimetry (PIV) and planar laser induced fluorescence (PLIF), we make simultaneous velocity–density measurements to study how dynamics and mixing are linked in this variable density flow. Experiments are conducted in a newly built, blow-down three-layer gas tunnel facility. Mixing between three gas streams is studied, where the top and bottom streams are comprised of air, and the middle stream is an air–helium mixture. Shear is minimized between these streams by matching their inlet velocities. The four experimental conditions investigated here consist of two different density ratios (Atwood numbers 0.3 and 0.6), each investigated at two instability development times (or equivalently, two streamwise locations), and all experiments are with the same middle stream thickness of 3 cm. The growth of the middle layer is measured using laser-based planar Mie scattering visualization. The mixing width is found to grow linearly with time at late times. Various quantitative measures of molecular mixing indicate a very high degree of molecular mixing at late times in the multilayer RTI flow. The vertical turbulent mass flux $a_y$ is calculated. In addition to mostly negative values of $a_y$ , typical of buoyancy-dominated flows due to negative correlation between velocity and density fluctuations, positive regions are also observed in profiles of $a_y$ due to entrainment and erosion at the lower edge of the mixing region. Global energy budgets are calculated for the multilayer RTI flow at late times and it is found that the majority of potential energy released has been dissipated due to viscous effects, and a large value of mixing efficiency ( $\sim$ 60 %) is observed.

Mechanics↗
DOE OSTI2024

Approaching periodic systems in ensemble density functional theory via finite one-dimensional models

Ensemble density functional theory (EDFT) is a generalization of ground-state DFT, which is based on an exact formal theory of finite collections of a system's ground and excited states. EDFT in various forms has been shown to improve the accuracy of calculated energy level differences in isolated model systems, atoms, and molecules, but it is not yet clear how EDFT could be used to calculate band gaps for periodic systems. We extend the application of EDFT toward periodic systems by estimating the thermodynamic limit with increasingly large finite one-dimensional 'particle in a box' systems, which approach the uniform electron gas (UEG). Using ensemble-generalized Hartree and local spin density approximation exchange-correlation functionals, we find that corrections go to zero in the infinite limit, as expected for a metallic system. However, there is a correction to the effective mass, with results comparable to other calculations on 1D, 2D, and 3D UEGs, which indicates promise for non-trivial results from EDFT on periodic systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Enhanced superconductivity by near-neighbor attraction in the doped extended Hubbard model

A recent experiment has unveiled an anomalously strong electron-electron attraction in the one-dimensional copper-oxide chain Ba 2–x Sr x CuO 3+δ . While the effect of the near-neighbor electron attraction V in the one-dimensional extended Hubbard chain has been examined recently, its effect in the Hubbard model beyond the one-dimensional chain remains unclear. Here, in this work, we report a density matrix renormalization group study of the extended Hubbard model on long four-leg cylinders on the square lattice. We find that the near-neighbor electron attraction V can notably enhance the long-distance superconducting correlations while simultaneously suppressing the charge-density-wave (CDW) correlations. Specifically, for a modestly strong electron attraction, the superconducting correlations become dominant over the CDW correlations with a Luttinger exponent K sc ~1 and strong divergent superconducting susceptibility. Our results provide a promising way to realize long-range superconductivity in the doped Hubbard model. The relevance of our numerical results to cuprate materials is also discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Corrosion and repassivation of Super 13Cr stainless steel in artificial 1D pit electrodes at elevated temperature

Repassivation behavior of Super 13Cr martensitic stainless steel was investigated using a one-dimensional artificial pit electrode in deaerated NaCl solutions at 85 °C. Critical potentials for pit repassivation (E crit ) were measured by downward potential scans. E crit and the final current density (i f ) at the end of the scan can be correlated to the pit repassivation, showing that repassivation is more probable with smaller i f and higher E crit . Pit repassivation at a constant potential was correlated with if and average current density (i avg ). A combination of lower i f and i avg suggests a higher probability for pit repassivation.

36 MATERIALS SCIENCE↗