Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Solar wind and substorm-related changes in the lobes of the geomagnetic tail

The relationship of the geomagnetic tail lobe energy density to solar wind dynamic pressure, the north-south component of the interplanetary magnetic field, and substorm expansion onsets is investigated. Enhanced lobe energy densities are observed to follow both southward turnings of the interplanetary magnetic field and solar wind dynamic pressure increases. An empirical relationship is developed relating the tail lobe magnetic energy density to the solar wind dynamic pressure by using data obtained when the interplanetary field was northward. Localized, off-center, or multiple-onset substorm expansion phases are shown to have little effect on the lobe magnetic field. A positive correlation is found between magnetosphere-wide substorm expansions and decreases in the lobe energy density. The positive correlation of the energy density with both the solar wind dynamic pressure and a southward interplanetary magnetic field and the positive correlation between magnetospheric substorm activity and lobe energy density decreases are demonstrated to be consistent with a phenomenological model of substorm behavior.

Caan, M. N.↗
NASA NTRS1985

Local density maxima - Progenitors of structure

Beginning with a short review of the observational data and of some previous theoretical ideas and numerical simulations, the question is addressed of how the large-scale structure that emerges around local density maxima depends on the nature of the primordial density perturbations field. The density contrast profile around local maxima is given, to a good approximation, by the primordial two-point correlation function. The mean number density of objects of a given core mass is calculated as a function of the primordial power spectrum, p(k). In an open universe, rich clusters should have halos steeper than galactic haloes. The observed structure is found to be consistent with omega-sub-zero less than 1.0 and n = -1.

Hoffman, Y.↗
NASA NTRS1997

Structure-Property Relationships of Bismaleimides

The purpose of this research was to control and systematically vary the network topology of bismaleimides through cure temperature and chemistry (addition of various coreactants) and subsequently attempt to determine structure-mechanical property relationships. Characterization of the bismaleimide structures by dielectric, rheological, and thermal analyses, and density measurements was subsequently correlated with mechanical properties such as modulus, yield strength, fracture energy, and stress relaxation. The model material used in this investigation was 4,4'-BismaleiMidodIphenyl methane (BMI). BMI was coreacted with either 4,4'-Methylene Dianiline (MDA), o,o'-diallyl bisphenol A (DABA) from Ciba Geigy, or Diamino Diphenyl Sulfone (DDS). Three cure paths were employed: a low- temperature cure of 140 C where chain extension should predominate, a high-temperature cure of 220 C where both chain extension and crosslinking should occur simultaneously, and a low-temperature (140 C) cure followed immediately by a high-temperature (220 C) cure where the chain extension reaction or amine addition precedes BMI homopolymerization or crosslinking. Samples of cured and postcured PMR-15 were also tested to determine the effects of postcuring on the mechanical properties. The low-temperature cure condition of BMI/MDA exhibited the highest modulus values for a given mole fraction of BMI with the modulus decreasing with decreasing concentration of BMI. The higher elastic modulus is the result of steric hindrance by unreacted BMI molecules in the glassy state. The moduli values for the high- and low/high-temperature cure conditions of BMI/MDA decreased as the amount of diamine increased. All the moduli values mimic the yield strength and density trends. For the high-temperature cure condition, the room- temperature modulus remained constant with decreasing mole fraction of BMT for the BMI/DABA and BMI/DDS systems. Postcuring PMR-15 increases the modulus over that of the cured material even though density values of cured and postcured PMR were essentially the same. Preliminary results of a continuous and intermittent stress relaxation experiment for BMI:MDA in a 2:1 molar ratio indicate that crosslinking is occurring when the sample is in the undeformed state. Computer simulation of properties such as density, glass transition temperature, and modulus for the low- temperature cure conditions of BMI/MDA and BMI/DABA were completed. The computer modeling was used to help further understand and confirm the structure characterization results. The simulations correctly predicted the trends of these properties versus mole fraction BMI and were extended to other BMI/diamine systems.

Tenteris-Noebe, Anita D.↗
NASA NTRS1988

Galactic interstellar abundance surveys with IUE. III - Silicon, manganese, iron, sulfur, and zinc

This paper continues a survey of intestellar densities, abundances, and cloud structure in the Galaxy using the IUE satellite. A statistical data set of 223 O3-B2.5 stars is constructed, including 53 stars in the Galactic halo. It is found that S II lines in B stars, of luminosity classes IV and V, have possible contamination from stellar S II, particular for stars with v sin i less than 200 km/s. The mean logarithmic depletions are -1.00, -1.19. -0.63, and -0.23 (Si, Mn,Fe,S, Zn). Depletions of Si, Mn, and Fe correlate with the mean hydrogen density n-bar along the line of sight, with a turnover for n-bar greater than 1/cm. Sulfur depletions correlate with n-bar along the line of sight. The slight Zn depletion correlation also appears to be statistically insignificant. No correlation of depletion is found with the physical density derived from H2 rotational states in 21 lines of sight. Depletion variations in the disk are consistent with a Galactic abundance gradient or with enhanced mean depletions in the anticenter region.

Van Steenberg, Michael E.↗
NASA NTRS1988

Electron density distributions in the high-latitude magnetosphere

Electron density profiles were constructed to study the plasma density depletions in the nightside auroral zone and the density variations with increasing altitude in the polar cap, using electric field spectrum measurements from the plasma wave instrument on DE-1. Sharply defined regions of depleted plasma densities were commonly observed on nightside auroral field lines, in which electron densities were strongly depleted in relation to the adjacent plasmaspheric and polar densities, forming a low-density cavity at about 70 deg invariant latitude. A correlation was found between low auroral plasma densities, upflowing ion distributions, and an energetic precipitating electron population, indicating that electron density depletions in the nightside auroral zone are directly associated with auroral acceleration processes.

Persoon, Ann M.↗
NASA NTRS2008

Comparison of ALE and SPH Simulations of Vertical Drop Tests of a Composite Fuselage Section into Water

Simulation of multi-terrain impact has been identified as an important research area for improved prediction of rotorcraft crashworthiness within the NASA Subsonic Rotary Wing Aeronautics Program on Rotorcraft Crashworthiness. As part of this effort, two vertical drop tests were conducted of a 5-ft-diameter composite fuselage section into water. For the first test, the fuselage section was impacted in a baseline configuration without energy absorbers. For the second test, the fuselage section was retrofitted with a composite honeycomb energy absorber. Both tests were conducted at a nominal velocity of 25-ft/s. A detailed finite element model was developed to represent each test article and water impact was simulated using both Arbitrary Lagrangian Eulerian (ALE) and Smooth Particle Hydrodynamics (SPH) approaches in LS-DYNA, a nonlinear, explicit transient dynamic finite element code. Analytical predictions were correlated with experimental data for both test configurations. In addition, studies were performed to evaluate the influence of mesh density on test-analysis correlation.

Jackson, Karen E.↗
NASA NTRS1975

Short-term time variability of Cygnus X-1

Autocorrelation functions, power-density spectra, and cross-correlation functions were calculated for 71 observations of Cyg X-1 by the Uhuru satellite. The average autocorrelation function and power-density spectrum were found to be independent of energy and consistent with a shot-noise source with a characteristic time constant of 0.45 s. The data in different energy bands were found to be 100 percent correlated.

Weisskopf, M. C.↗
NASA NTRS1971

High-resolution electron microscope observation of voids in amorphous Ge.

Electron micrographs have been obtained which clearly show the existence of a void network in amorphous Ge films formed at substrate temperatures of 25 and 150 C, and the absence of a void network in films formed at higher substrate temperatures of 200 and 250 C. These results correlate quite well with density measurements and predictions of void densities by indirect methods.

Donovan, T. M.↗
NASA NTRS1972

The 6300 A predawn enhancement - Excitation by photoelectrons from the magnetic conjugate point.

Incoherent scatter and tilting filter photometer data from Arecibo Observatory were combined to search for a contribution to the 6300 A predawn enhancement due to impact excitation by photoelectrons from the magnetic conjugate point. Prior to about 105 deg conjugate solar zenith angle, calculations of the 6300 A intensities due to dissociative recombination gave good agreement with the observed intensities. Then, with the arrival of conjugate photoelectrons (confirmed by plasma line enhancements), the observed intensities rose above the calculated, the difference increasing until a plateau was achieved at a conjugate solar zenith angle of about 95 deg. The difference or residual intensity is attributed to direct photoelectron impact excitation. Significant day-to-day variations in the onset angle and intensity have a strong negative correlation with ionospheric electron density.

Wickwar, V. B.↗
NASA NTRS1973

Comparative evaluation of ERTS-A imagery for resource inventory in land use planning

There are no author-identified significant results in this report. Evaluation has begun on ERTS-1 imagery of Crook County for use in landform interpretation and geologic mapping and interpretation. Outside of Crook County the geology team has been impressed by the display of fault patterns in southeastern Oregon and has begun preliminary analyses of these. Using the color combiner a complete timber type map of (1) all the forest land within Crook County, and (2) all the Ochoco National Forest has been completed. The timber types consist of five density classes which are correlated with different species compositions as the first step in the multistage forest inventory. Using the ERTS magnetic tape data the computer center has produced a 12 by 25 mile strip printout of bands 5, 6, and 7. The computer printouts are to be analyzed for different timber types and possible insect damage. Other results are: (1) limited number of clearcuts in eastern Oregon and in Cascades evident; (2) positive transparencies of band 5 appear to be too dark for maximum information of forested areas; and (3) much more information in the computer printouts of bands 6 and 7, than 5, when analyzing forest conditions.

Simonson, G. H.↗
NASA NTRS1973

Comparison of results obtained with various sensors used to measure fluctuating quantities in jets.

An experimental investigation has been conducted to compare the results obtained with six different instruments that sense fluctuating quantities in free jets. These sensors are typical of those that have recently been used by various investigators who are engaged in experimental studies of jet noise. Intensity distributions and two-point correlations with space separation and time delay were obtained. The static pressure, density, and velocity fluctuations are well correlated over the entire cross section of the jet and the cross-correlations persist for several jet diameters along the flow direction. The eddies appear to be flattened in the flow direction by a ratio of 0.4.

Parthasarathy, S. P.↗
NASA NTRS1974

Skylab 2 ground winds data reduction and statistical analysis

A ground winds test was conducted on the Skylab 2 spacecraft in a subsonic wind tunnel and the results were tape recorded for analysis. The data reduction system used to analyze the tapes for full scale, first and second mode bending moments, or acceleration plots versus dynamic pressure or wind velocity is explained. Portions of the Skylab 2 tape data were analyzed statistically in the form of power spectral densities, autocorrelations, and cross correlations to introduce a concept of using system response decay as a measure of linear system damping.

Source record↗
NASA NTRS1974

Electromagnetic processes in the atmosphere of pulsars

The work consists of two parts. The first deals with the fine structure of radio pulses. Based on kinetic theory, processes occurring in the plasma shell of a pulsar when external electromagnetic radiation is present are investigated. It is shown that electromagnetic waves cause electrons to drift relative to ions, and initiate longitudinal oscillations. A dispersion equation describing the longitudinal oscillations in magnetized plasma is derived. Conditions for excitation of oscillations are found. Correlation functions of electron density are calculated, along with the coefficients of electromagnetic wave scattering. It is shown that variations in the amplitude of pulsar pulses are associated with scintillations caused by fluctuations in the plasma electron density. The second part of the study presents a mechanism for the radio emission of pulsars. The model of a rotating and a pulsating star, a neutron star with dipolar or more complex magnetic field, is examined.

Yukhimuk, A. K.↗
NASA NTRS1976

Cubic spline function interpolation in atmosphere models for the software development laboratory: Formulation and data

A tabulation of selected altitude-correlated values of pressure, density, speed of sound, and coefficient of viscosity for each of six models of the atmosphere is presented in block data format. Interpolation for the desired atmospheric parameters is performed by using cubic spline functions. The recursive relations necessary to compute the cubic spline function coefficients are derived and implemented in subroutine form. Three companion subprograms, which form the preprocessor and processor, are also presented. These subprograms, together with the data element, compose the spline fit atmosphere package. Detailed FLOWGM flow charts and FORTRAN listings of the atmosphere package are presented in the appendix.

Kirkpatrick, J. C.↗
NASA NTRS1976

Pc 3, 4 activity and interplanetary field orientation

Analysis of Pc 3, 4 micropulsation wave forms recorded at Calgary in September 1969 shows a tendency toward signal enhancement in cases where the interplanetary magnetic field is at a small angle to the sun-earth line. Scatter plots of hourly Pc 3, 4 amplitudes exhibit a definite trend toward large signals when this angle is less than 50 or 60 degrees, and a corresponding disappearance of significant amplitudes when the angle is greater than 60 degrees. There is, however, an appreciable variability in individual cases. Power density spectrograms improved the correlation of pulsation strength with low angle in some cases.

Greenstadt, E. W.↗
NASA NTRS1977

On the photographic processing and digital texture for remote sensing of Kujukuri Coast of Chiba in Japan

Remote sensing of various coastal phenomena on the Kujukuri Coast and Kashimanada Coast was done by the use of aircraft for the purpose of investigating the characteristics of shore reefs and floating sand, and the depth of the sea. A multispectral camera and a video ITV camera were used as sensors. The first flight was over the Kashimanada and Kujukuri Coasts and the next flight was over the Katsuura Bay. The shape of shore reefs, the state of floating sand, the depth of the sea, etc., are represented by equidensitographs using texture. The interval of density slices is 0.05. Correlations between the textures represented by equidensitographs, digital graphs and analog display are estimated.

Genda, H.↗
NASA NTRS1980

Mass loss of a TEOS-coated, reinforced carbon-carbon composite subjected to a simulted shuttle entry environment

Coated, reinforced carbon-carbon (RCC) is used for the leading edges of the space shuttle. The mass loss characteristics of RCC specimens coated with tetraethyl orthosilicate (TEOS) were determine for conditions which simulated the environment expected at the lug attachment area of the leading edge. Mission simulation included simultaneous application of load, temperature, and oxygen partial pressure. Maximum specimen temperature was 900 K (1160 F). Specimens were exposed for up to 80 simulated missions. Stress levels up to 6.8 MPa (980 psi) did not significantly affect the mass loss characteristics of the TEOS-coated RCC material. Mass loss was correlated with the bulk density of the specimens.

Stroud, C. W.↗