Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data digitization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

REVISED MASS-TO-LIGHT RATIOS FOR NEARBY GALAXY GROUPS AND CLUSTERS

We present a detailed investigation of the cluster stellar mass-to-light (M*/L) ratio and cumulative stellar masses, derived on a galaxy-by-galaxy basis, for 12 massive (M {sub 500} ∼ 10{sup 14}-10{sup 15} M {sub ☉}), nearby clusters with available optical imaging data from the Sloan Digital Sky Survey Data Release 10 and X-ray data from the Chandra X-ray Observatory. Our method involves a statistical cluster membership using both photometric and spectroscopic redshifts when available to maximize completeness while minimizing contamination effects. We show that different methods of estimating the stellar mass-to-light ratio from observed photometry result in systematic discrepancies in the total stellar masses and average mass-to-light ratios of cluster galaxies. Nonetheless, all conversion methodologies point to a lack of correlation between M*/L{sub i} and total cluster mass, even though low-mass groups contain relatively more blue galaxies. We also find no statistically significant correlation between M*/L{sub i} and the fraction of blue galaxies (g – i < 0.85). For the mass range covered by our sample, the assumption of a Chabrier initial mass function (IMF) yields an integrated M*/L{sub i} ≅ 1.7 ± 0.2 M {sub ☉}/L {sub i,} {sub ☉}, a lower value than used in most similar studies, though consistent with the study of low-mass galaxy groups by Leauthaud et al. A light (diet) Salpeter IMF would imply a ∼60% increase in M*/L{sub i}.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

AutoEnRichness: A hybrid empirical and analytical approach for estimating the richness of galaxy clusters

ABSTRACT We introduce AutoEnRichness, a hybrid approach that combines empirical and analytical strategies to determine the richness of galaxy clusters (in the redshift range of 0.1 ≤ z ≤ 0.35) using photometry data from the Sloan Digital Sky Survey Data Release 16, where cluster richness can be used as a proxy for cluster mass. In order to reliably estimate cluster richness, it is vital that the background subtraction is as accurate as possible when distinguishing cluster and field galaxies to mitigate severe contamination. AutoEnRichness is comprised of a multistage machine learning algorithm that performs background subtraction of interloping field galaxies along the cluster line of sight and a conventional luminosity distribution fitting approach that estimates cluster richness based only on the number of galaxies within a magnitude range and search area. In this proof-of-concept study, we obtain a balanced accuracy of 83.20 per cent when distinguishing between cluster and field galaxies as well as a median absolute percentage error of 33.50 per cent between our estimated cluster richnesses and known cluster richnesses within r200. In the future, we aim for AutoEnRichness to be applied on upcoming large-scale optical surveys, such as the Legacy Survey of Space and Time and Euclid, to estimate the richness of a large sample of galaxy groups and clusters from across the halo mass function. This would advance our overall understanding of galaxy evolution within overdense environments as well as enable cosmological parameters to be further constrained.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

The disCO2ver Platform: Curating Data and Tools for Geologic Carbon Sequestration and Deep Subsurface Research Systems

The U.S. DOE National Energy Technology Laboratory has invested 12+ years of development into the data repository and digital laboratory, the Energy Data eXchange (EDX, edx.netl.doe.gov). Supporting a variety of research areas across the DOE Office of Fossil Energy and Carbon Management, the platform has successfully curated and preserved thousands of data products from DOE research. The Carbon Storage Program has successfully supported data curation, upload, and publishing of data products on EDX for many years, demonstrating a success story of how resources like EDX can effectively help with long term preservation and publishing of DOE data products. EDX continues to shift towards cloud-supported infrastructure, taking a hybrid approach combining on-premises compute and storage integrated with cloud-hosted services. The integration of cloud compute and hybrid architecture enables the development of EDX-hosted platforms that tailor the data and tools hosted on them to a specific community, enables implementation of machine learning tools for data discovery and filtering, and enables the hosting of virtual (online user interface) tools. Geologic carbon sequestration (GCS) research continues to scale up in response to the current administration goals to reduce greenhouse gas emissions and transition the energy economy. Over the last year, EDX’s disCO2ver platform has been developed in response to the need for access to data products and tools to support the scaling up of GCS research. disCO2ver provides access to data resources and tools, produced by DOE and outside authoritative external resources. The platform also provides a user-access control component for the virtualization and cloud hosting of tools. Tools that need to be virtualized, to eliminate the need for users to download the tool and use local compute resources, is essential to supporting big-data analysis and machine learning that is becoming common place in carbon storage modeling, risk analysis, and data publishing practices. This talk will review the EDX’s disCO2ver platform and the current work ongoing to curate data and tools to support GCS and deep subsurface systems research.

Morkner, Paige↗
DOE OSTI2022

Quasar Identification Using Multivariate Probability Density Estimated from Nonparametric Conditional Probabilities

Nonparametric estimation for a probability density function that describes multivariate data has typically been addressed by kernel density estimation (KDE). A novel density estimator recently developed by Farmer and Jacobs offers an alternative high-throughput automated approach to univariate nonparametric density estimation based on maximum entropy and order statistics, improving accuracy over univariate KDE. This article presents an extension of the single variable case to multiple variables. The univariate estimator is used to recursively calculate a product array of one-dimensional conditional probabilities. In combination with interpolation methods, a complete joint probability density estimate is generated for multiple variables. Good accuracy and speed performance in synthetic data are demonstrated by a numerical study using known distributions over a range of sample sizes from 100 to 10 6 for two to six variables. Performance in terms of speed and accuracy is compared to KDE. The multivariate density estimate developed here tends to perform better as the number of samples and/or variables increases. As an example application, measurements are analyzed over five filters of photometric data from the Sloan Digital Sky Survey Data Release 17. The multivariate estimation is used to form the basis for a binary classifier that distinguishes quasars from galaxies and stars with up to 94% accuracy.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

Radio Luminosity Function of Flat-spectrum Radio Quasars

We present the radio luminosity function (LF) of flat-spectrum radio quasars (FSRQ), using the the largest and most complete sample to date. Cross-matching between the FIRST 20 cm and GB6 6 cm radio surveys, we find 638 flat-spectrum radio sources above 220 mJy at 1.4 GHz; of these, 327 are are classified and verified using optical spectroscopy data, mainly from Sloan Digital Sky Survey Data Release 12. We also considered flat-spectrum radio sources that lack both literature references and optical spectroscopy, and we identified 12 out of the 43 such sources to potentially be FSRQs, using their WISE colors. From the fully identified sample of 242 FSRQs, we derived the radio LF and cosmic evolution of blazars at 1.4 GHz, finding good agreement with previous work at 5 GHz. The number density of FSRQs increases dramatically to a redshift of z ∼ 2 and then declines for higher redshifts. Furthermore, the redshift at which the quasar density peaks is clearly dependent on luminosity, with more luminous sources peaking at higher redshifts. The approximate best-fit LF for a luminosity-dependent evolutionary model is a broken power-law with slopes ∼0.7 and ∼1.7 below and above the break luminosity, logL{sub 1.4}∼43.8 erg s{sup −1}, respectively.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Changing-look Active Galactic Nuclei from the Dark Energy Spectroscopic Instrument. II. Statistical Properties from the First Data Release

We present the identification of changing-look active galactic nuclei (CL-AGNs) from the Dark Energy Spectroscopic Instrument First Data Release and Sloan Digital Sky Survey Data Release 16 at z ≤ 0.9. To confirm the CL-AGNs, we utilize spectral flux calibration assessment via an [O III ]-based calibration, pseudophotometry examination, and visual inspection. This rigorous selection process allows us to compile a statistical catalog of 561 CL-AGNs, encompassing 527 Hβ, 149 Hα, and 129 Mg II CL behaviors. In this sample, we find (1) a 283:278 ratio of turn-on to turn-off CL-AGNs. (2) The median Eddington ratio for CL-AGNs in the dim state is approximately λ Edd ∼ 0.01. (3) A strong correlation between the change in the luminosity of the broad emission lines (BELs) and variation in the continuum luminosity, with Mg II and Hβ displaying similar responses during CL phases. (4) The Baldwin–Phillips–Terlevich diagram for CL-AGNs shows no statistical difference from the general AGN catalog. (5) Five CL-AGNs are associated with asymmetrical mid-infrared flares, possibly linked to tidal disruption events. Given the large CL-AGN sample and the stochastic sampling of spectra, we propose that some CL phenomena are inherently due to typical AGN variability during low accretion rates, particularly for CL phenomenon only occurring on one BEL. Finally, we introduce a monotonically dimming CL phase for objects characterized by a gradual decline over decades in the light curve and the complete disappearance of entire BELs in faint spectra, indicative of a real transition in the accretion disk.

accretion↗
DOE OSTI2016

A detection of the integrated sachs-wolfe imprint of cosmic superstructures using a matched-filter approach

We present a new method for detection of the integrated Sachs–Wolfe (ISW) imprints of cosmic superstructures on the cosmic microwave background (CMB), based on a matched-filtering approach. The expected signal-to-noise ratio for this method is comparable to that obtained from the full cross-correlation, and unlike other stacked filtering techniques it is not subject to an a posteriori bias. We apply this method to Planck CMB data using voids and superclusters identified in the CMASS galaxy data from the Sloan Digital Sky Survey Data Release 12, and measure the ISW amplitude to be A{sub ISW}=1.64±0.53 relative to the ΛCDM expectation, corresponding to a 3.1σ detection. In contrast to some previous measurements of the ISW effect of superstructures, our result is in agreement with the ΛCDM model.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Changing-look Active Galactic Nuclei from the Dark Energy Spectroscopic Instrument. II. Statistical Properties from the First Data Release

We present the identification of changing-look active galactic nuclei (CL-AGNs) from the Dark Energy Spectroscopic Instrument First Data Release and Sloan Digital Sky Survey Data Release 16 at z≤ 0.9. To confirm the CL-AGNs, we utilize spectral flux calibration assessment via an [O iii]-based calibration, pseudophotometry examination, and visual inspection. This rigorous selection process allows us to compile a statistical catalog of 561 CL-AGNs, encompassing 527 Hβ, 149 Hα, and 129 Mg ii CL behaviors. In this sample, we find (1) a 283:278 ratio of turn-on to turn-off CL-AGNs. (2) The median Eddington ratio for CL-AGNs in the dim state is approximately λ$_{Edd}$ ∼ 0.01. (3) A strong correlation between the change in the luminosity of the broad emission lines (BELs) and variation in the continuum luminosity, with Mg ii and Hβ displaying similar responses during CL phases. (4) The Baldwin–Phillips–Terlevich diagram for CL-AGNs shows no statistical difference from the general AGN catalog. (5) Five CL-AGNs are associated with asymmetrical mid-infrared flares, possibly linked to tidal disruption events. Given the large CL-AGN sample and the stochastic sampling of spectra, we propose that some CL phenomena are inherently due to typical AGN variability during low accretion rates, particularly for CL phenomenon only occurring on one BEL. Finally, we introduce a monotonically dimming CL phase for objects characterized by a gradual decline over decades in the light curve and the complete disappearance of entire BELs in faint spectra, indicative of a real transition in the accretion disk.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

Providing plant data analytics through a seamless digital environment - 211

As technology continues to evolve and become more integrated into a worker's daily routine in the commercial nuclear power industry the need for easy access to data becomes a priority. Not only does the need for data increase but the amount of data collected increases. In most cases the data is collected and stored in various software applications, many of which are legacy systems, which do not offer any other option to access the data except through the application's user interface. Furthermore the data get grouped in 'silos' according to work function and not necessarily by subject. Hence, in order to access all the information needed for a particular task or analysis one may have to access multiple applications to gather all the data needed. The industry and the research community have identified the need for a digital architecture and more importantly the need for a Seamless Digital Environment (SDE). An SDE provides a means to access multiple applications, gather the data points needed, conduct the analysis requested, and present the result to the user with minimal or no effort by the user. The study researches the potential approaches to building an analytics solution for equipment reliability, on a small scale, focusing on either a single piece of equipment or a single system. The analytics solution will consist of a data integration layer, predictive and machine learning layer and the user interface layer that will display the output of the analysis in a straight forward, easy to consume manner. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Control-Agnostic Beam Instrumentation with Redis at the Core

Redis isn’t a database — it’s our protocol. Fermilab’s RedisAdapter provides a high-performance, control-system-agnostic bridge between digitized beam data and downstream consumers such as ACNET and EPICS. It forms the foundation of three new software components deployed across MicroTCA-based digitizers: GMMDM, a runtime for memory-mapped data movement from Zynq-based platforms; GRAFE, a front end for Redis-to-ACNET presentation; and GREFE, an EPICS IOC front end. Together, these tools enable modular, standardized instrumentation pipelines. Precision timing is handled via White Rabbit PPS distribution, allowing nanosecond-scale synchronization across crates. This architecture, originally prototyped in Booster BPM systems, is now deployed on modern hardware and designed to meet the performance, modularity, and scalability requirements of the PIP-II era.

Steinkamp, Derek [Fermilab] (ORCID:000900027228626↗
DOE OSTI2023

Overview and first measurements of the MAST Upgrade bolometer diagnostic

Here, a suite of multi-channel resistive bolometers has been implemented to measure the total radiation from Mega Amp Spherical Tokamak Upgrade plasmas, with cameras covering the core plasma and lower divertor chamber. Data are digitized and processed using novel field-programmable gate array-based electronics, offering improved compactness and new operational capabilities. A synthetic diagnostic has been developed to explore the quality of 2D reconstructions available from the system and to quantify the uncertainty on quantities such as the total radiated power. Measurements in the first campaign have demonstrated correct functioning of the diagnostic while also highlighting issues with electrical noise and some failure mechanisms of the detectors, as well as significant neutral beam fast-particle losses.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Glass Additive and Subtractive Manufacturing of a Fiber Optic Rotary Encoder for Downhole Pressure Sensing

This article presents a fiber optic rotary encoder-based pressure sensor for downhole applications. The rotary encoder, which is composed of an encoding pad and an all-glass optical fiber sensing head, converts the rotation angles of a pressure transducer to digital codes. The optical fiber only serves as the telemetry channel to directly transmit the data in digital format such that the environmental temperature influence and the long-time drift are minimized. The glass additive and subtractive manufacturing (ASM) techniques are used to embed the multichannel optical fibers into a bulk-fused silica glass substrate. Because the fused silica glass shares a similar material property to the optical fiber (e.g., thermal expansion coefficient), the optical fiber sensing head is well sealed and fixed even at an elevated temperature. The picosecond laser blackening technique is used to fabricate the high reflectivity contrast encoding pad with high accuracy. Here, the proposed pressure sensor was manufactured and experimentally verified to have a signal-to-noise ratio (SNR) of 23 dB and a linear pressure response with a root-mean-square error (RMSE) of 0.37. During the 400-h 250 °C long-term stability test, there was no digital code variation. In addition, a mathematical model to study the relationships between the sensor’s performances and design parameters was established. According to the model, a 12-bit encoder (0.02% pressure sensitivity) can be achieved with a radius of 20 mm.

02 PETROLEUM↗
DOE OSTI2021

Analysis of digitized herbarium records and community science observations provides a glimpse of downy mildew species diversity of North America, reveals potentially undescribed species, and documents the need for continued digitization and collecting

Downy mildew diseases caused by Peronosporaceae cause significant crop losses globally, with several emerging and resurgent threats in recent decades. Biodiversity data from digitized herbarium specimens provide an opportunity to develop a baseline census of species diversity, however, these resources may represent aggregations of nonrandom and opportunistic collecting efforts, which could lead to spurious results. Here, the MyCoPortal census of digitized herbarium records for downy mildew species collected from North America 1800 to present were analyzed. From 9838 unique records, 196 species were identified, reflecting ~28% of known species diversity. Temporal and geographic collecting biases were observed, with 90% of the collections made prior to 1960 and the efforts of six “super-collectors” accounting for 25% of the collections. The presence of 50–100 undescribed species in North America was inferred from the records. Together, these results highlight the need for continued downy mildew collections, taxonomic research and digitization efforts.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Database of low‐temperature absorption and fluorescence spectra of native photosynthetic tetrapyrrole macrocycles

Low-temperature (77 K) absorption and fluorescence spectra of 12 naturally occurring photosynthetic tetrapyrrole macrocycles have been recorded in a frozen glass (2-methyltetrahydrofuran). The compounds encompass distinct chromophore classes: porphyrin, chlorophyll c 2 ; chlorin, chlorophylls a, b, d, f and bacteriochlorophylls c, d, e, f; and bacteriochlorin, bacteriochlorophylls a, b, g. The spectra are compared with those of the same pigment in liquid solution (predominantly 2-methyltetrahydrofuran) at room temperature (293 K). The measured Stokes shifts at 77 K across the 12 macrocycles range from ~30 to 300 cm −1 . The spectral data in digital form are made available as part of the PhotochemCAD databases. Literature searches have revealed extensive published data for Chl a (often in biological matrices) but at best rather limited data for less common macrocycles. The availability of a systematic collection of curated spectral data collected at low temperature should be useful for a variety of assessments, including reconstruction of absorption spectra of (bacterio)chlorophyll-containing protein complexes, vibrational analysis of absorption and fluorescence spectra, and calculations where knowledge of energy levels is important.

Niedzwiedzki, Dariusz M. [Washington University in↗