Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “crystalline systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Regenerable Iodine Water-Disinfection System

Iodinated resin bed for disinfecting water regenerated to extend useful life. Water flows through regeneration bed of crystalline iodine during regeneration. At other times, flow diverted around regeneration bed. Although regeneration cycle manually controlled readily automated to start and stop according to signals from concentration sensors. Further benefit of regeneration is bed provides highly concentrated biocide source when needed. Concentrated biocide used to superiodinate system after contamination from routine maintenance or unexpected introduction of large concentration of microbes.

Sauer, Richard L.↗

Interfacial and Activation Energies of Environmentally Abundant Heterogeneously Nucleated Iron(III) (Hydr)oxide on Quartz

Poorly crystalline iron(III) (hydr)oxide nanoparticles are ubiquitous in environmental systems and play a crucial role in controlling the fate and transport of contaminants. Yet, the thermodynamic and kinetic parameters, e.g., the effective interfacial (α^') and apparent activation (E a ) energies, of iron(III) (hydr)oxide nucleation on earth-abundant mineral surfaces have not been determined, which hinders an accurate prediction of iron(III) (hydr)oxide formation and its interactions with other toxic or reactive ions. Here, for the first time, we report experimentally obtained α^' and E a for iron(III) (hydr)oxide nucleation on quartz mineral surfaces, by employing a flow-through, time-resolved grazing incidence small angle X-ray scattering (GISAXS). GISAXS enabled the in situ detection of iron(III) (hydr)oxide nucleation rates under different supersaturations (σ, achieved by varying pH 3.3-3.6) and temperatures (12-35ºC). By quantitative analyses based on classical nucleation theory, α^' was obtained to be 34.6 mJ/m 2 and E a was quantified as 32.8 kJ/mol. The fundamental thermodynamic and kinetic parameters obtained here will advance our fundamental understanding of the surface chemistry and nucleation behavior of iron(III) (hydr)oxides in subsurface and water treatment systems, as well as their effects on the fate and transport of pollutants in natural and engineered water systems. The in situ flow-through GISAXS method can also be adapted to quantify thermodynamic and kinetic parameters at interfaces for many important solid–liquid environmental systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly textured metal anodes for stable aqueous batteries: Fabrication and characterization

We report a purely mechanical “cold-compression flow” method for fabricating Zn, Sn, and In substrates with tunable crystallographic textures. Using textured Zn as a model system, we investigate Zn electrocrystallization and demonstrate correlated growth of crystalline films with correlation lengths from tens to hundreds of micrometers. At 5 milliamperes per square centimeter (mA/cm 2 ), capacities between 20 and 82 milliampere hours per square centimeter (mA·hour/cm 2 ) are achieved depending on substrate texture level. At higher currents (40 mA/cm 2 ), capacities reach up to 604 mA·hour/cm 2 . Rotating disk electrode studies show that dominantly (002) textured Zn substrates exhibit enhanced corrosion resistance and reduced interphase passivation. We introduce an effective Damköhler number (Da*) to concisely describe morphological evolution during electrocrystallization across substrates with different textures. High-texture (002) Zn substrates substantially enhance performance in high-capacity (~20 mA·hour/cm 2 ) symmetric Zn||Zn cells and full cells (Zn||δ-MnO 2 and Zn||I 2 ), enabling fast-charging and prolonged energy storage in coin and pouch rechargeable Zn battery formats.

Science & Technology - Other Topics↗

Highly Reduced Forsterite and Enstatite from Stardust Track 61: Implications for Radial Transport of E Asteroid Material

The Stardust Mission returned a large fraction of high-temperature, crystalline material that was radially transported from the inner solar system to the Kuiper Belt [1,2]. The mineralogical diversity found in this single cometary collection points to an even greater number of source materials than most primitive chondrites. In particular, the type II olivine found in Wild 2 includes the three distinct Fe/Mn ratios found in the matrix and chondrules of carbonaceous chondrites (CCs) and unequilibrated ordinary chondrites (UOCs) [3]. We also find that low-Ca pyroxene is quite variable (approximately Fs3-29) and is usually indistinguishable from CC, UOC, and EH3 pyroxene as well. However, occasional olivine and pyroxene compositions are found in Wild 2 that are inconsistent with chondrites. The Stardust track 61 terminal particle (TP) is one such example and is the focus of this study. It s highly reduced forsterite and enstatite is consistent only with that in Aubrites, in which FeO is essentially absent from these phases (less than approximately 0.1 wt.% FeO) [4].

Frank, David R.↗

Modeling of Response of Thermoplastic Composites Under High Energy Impact

This work investigates the response of a thermoplastic panel under high energy ballistic impact. The composite material system is a carbon fiber reinforced low melt semi-crystalline resin TC1225 LMPAEK T700G (T700/LMPAEK3). Several high energy dynamic impact tests were performed where an aluminum projectile impacted various panels at different impact velocities. For this work, the test performed at an impact velocity of 73.2 m/s was investigated. The projectile rebounded upon impact, and the damage to the panel was characterized through ultrasonic and CT-scanning. Response of the panel under impact and the associated damage is discussed. Numerical simulation of the impact process was performed using the LS-DYNA® computer code [1] with a new material model MAT_COMPOSITE_DAMAGE_DGD (MAT 299), a modification over MAT 261 material model in terms of an improved representation of damage coupling and additional capability for strain rate effects. Delaminations were modeled using cohesive zone contact formulation in LS-DYNA®, wherein the mixed-mode fracture is captured via the Benzegaggh-Kenane (B-K) mode-dependent fracture energy interpolation law. Simulation of this impact test demonstrates a good match of results in terms of panel deflection and panel-projectile interactions. The overall extent of delaminations was under-predicted by the simulation. This work forms the basis to model tests performed at higher velocities, involving projectile penetration of panel.

Composite Materials↗

Environmental, health and safety assessment of photovoltaics

The environmental, health, and safety (E, H and S) concerns associated with the fabrication, deployment, and decommissioning of photovoltaic (PV) systems in terrestial applications are identified and assessed. Discussion is limited to crystalline silicon technologies. The primary E, H, and S concerns that arise during collector fabrication are associated with occupational exposure to materials of undetermined toxicity or to materials that are known to be hazardous, but for which process control technology may be inadequate. Stricter exposure standards are anticipated for some materials and may indicate a need for further control technology development. Minimizing electric shock hazards is a significant concern during system construction, operation and maintenance, and decommissioning.

Rose, E. C.↗

Nematicity and nematic fluctuations in iron-based superconductors

The reduction of rotational symmetry in a crystalline solid driven by an electronic mechanism is referred to as electronic nematicity. This phenomenon – initially thought to be rare – has by now been observed in an increasing number of systems. Here, the iron-based superconductors present an ideal material platform to study nematicity in crystalline solids. Their nematic transition is pronounced, it can be studied with a wide range of experimental techniques; it is easily tunable; and high-quality samples are widely available. As research on nematicity in iron-based materials is now in its second decade, it builds on tremendous progress in theoretical concepts and experimental techniques. Thus, a stage has been reached at which the nematic phase can be addressed with confidence in its full complexity, including momentum-, time- and material- dependence of the order parameter. Important open questions concern the mechanism by which nematicity affects superconducting pairing and normal-state properties, with a central role for the challenging issue of nematic quantum criticality.

Electronic properties and materials↗

Carbon Capture in Novel Porous Liquids

Direct air capture (DAC) of CO 2 is one of the negative emission technologies under development to limit the impacts of climate change. The dilute concentration of CO 2 in the atmosphere (~400 ppm) requires new materials for carbon capture with increased CO 2 selectivity that is not met with current materials. Porous liquids (PLs) are an emerging material that consist of a combination of solvents and porous hosts creating a liquid with permanent porosity. PLs have demonstrated excellent CO 2 selectivity, but the features that control how and why PLs selectively capture CO 2 is unknown. To elucidate these mechanisms, density functional theory (DFT) simulations were used to investigate two different PLs. The first is a ZIF-8 porous host in a water/glycol/2-methylimidazole solvent. The second is the CC13 porous organic cage with multiple bulky solvents. DFT simulations identified that in both systems, CO 2 preferentially bound in the pore window rather than in the internal pore space, identifying that the solvent-porous host interface controls the CO 2 selectivity. Additionally, SNL synthesized ZIF-8 based PL compositions. Evaluation of the long-term stability of the PL identified no change in the ZIF-8 crystallinity after multiple agitation cycles, identifying its potential for use in carbon capture systems. Through this project, SNL has developed a fundamental understanding of solvent-host interactions, as well as how and where CO 2 binds in PLs. Through these results, future efforts will focus not on how CO 2 behaves inside the pore, but on the porous host-solvent interface as the driving force for PL stability and CO 2 selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mid-Infrared Spectrum of the Zodiacal Emission: Detection of Crystalline Silicates in Interplanetary Dust

Within a few astronomical units of the Sun the solar system is filled with interplanetary dust, which is believed to be dust of cometary and asteroidal origin. Spectroscopic observations of the zodiacal emission with moderate resolution provide key information on the composition and size distribution of the dust in the interplanetary space. They can be compared directly to laboratory measurements of candidate materials, meteorites, and dust particles collected in the stratosphere. Recently mid-infrared spectroscopic observations of the zodiacal emission have been made by two instruments on board the Infrared Space Observatory; the camera (ISOCAM) and the spectrophotometer (ISOPHOT-S). A broad excess emission feature in the 9-11 micron range is reported in the ISOCAM spectrum, whereas the ISOPHOT-S spectra in 6-12 microns can be well fitted by a blackbody radiation without spectral features.

Ootsubo, T.↗

Mechanisms and Consequences of Intra-Crystalline Enrichment of Ancient Radiogenic Pb in Detrital Hadean Zircons from the Jack Hills, Western Australia

The recent discovery of Pb* (radiogenic lead) -enriched domains (PEDs) in zircon using high-resolution scanning ion imaging, atom probe tomography and transmission electron microscopy indicates that the U-Pb isotopic system in zircon can be affected not only by Pb* loss but also by intra-crystalline Pb* enrichment. However, the formation mechanism of PEDs and the consequences for in-situ U-Pb dating remain elusive. To further understand these issues, scanning ion imaging and U-Pb dating were carried out on 51 Hadean detrital zircon grains from the Jack Hills, Western Australia. Of these, 8 grains were found to contain micrometer-scale PEDs with elevated Pb-207 and Pb-206 in the ion images. Isotope profiles across these PEDs confirm that they represent unsupported Pb* resulting from intra-grain mobilization and local enrichment of Pb* during ancient overprinting events. The PEDs are rare in most grains, with only 1 – 3 Pb* hotspots present in any ~70 μm × 70 μm imaged area, and are located either in dark-CL, high-U growth zones, or associated with bright-CL, low-Th recrystallized domains, suggesting that they were likely formed by local-scale processes. The PEDs located in dark-CL, high-U growth zones likely resulted from Pb* trapped in local, interconnected pathways produced by radiation damage during thermal overprinting events. Those associated with bright-CL, low-Th domains are interpreted as Pb* concentrated in nanoscale pores formed during fluid-present recrystallization of non-metamict zircon. Our interpretations therefore imply that intra-crystalline enrichment of Pb* in zircon can occur at various scales and through diverse mechanisms. Age calculations based on the ion images demonstrate that incorporation of PEDs in conventional in-situ SIMS spots produces spuriously old ages that are either reversely discordant or concordant, depending on the time of Pb* mobilization and the analytical precision. The implication is that careful investigation of intra-grain distribution of U-Th-Pb isotopes is required in order to better understand the U-Pb isotopic system and to obtain reliable crystallization ages for ancient zircons affected by complex Pb* mobilization and redistribution.

Unsupported radiogenic lead↗

Effects of Sodium and Magnesium Ions on the Photochemically Induced Heterogeneous Formation of Manganese Oxides and Their Structural Evolution

Manganese (Mn) oxides are abundant in aquatic and terrestrial environments, where they play significant roles in redox cycling and biological metabolisms. We recently observed that Mn oxides were homogeneously formed during the abiotic oxidation of Mn 2+ (aq) to Mn(IV) by O 2 •– via nitrate photolysis, at a rate comparable to that of biotic Mn oxide formation. On the other hand, for the heterogeneous formation of Mn oxides, the presence of a substrate can alter the required thermodynamic driving force, which may affect their crystalline phases and further influence the oxidative capability of redox cycling in environmental systems. However, little is known about the photochemically induced heterogeneous formation of Mn oxides on substrates. In this study, we investigated the heterogeneous formation of Mn oxides on a quartz substrate in the presence of two environmentally abundant cations, Na + and Mg 2+ . In contrast to homogeneously generated Mn oxides, the heterogeneously formed Mn oxides displayed faster crystalline phase evolutions and morphological changes over time. Additionally, the coexistence of Na + and Mg 2+ ions greatly affected the initial crystalline phases and the phase evolution, as well as the surface morphologies of the Mn oxides. Finally, these discoveries contribute to our understanding of how various Mn oxides form in nature and provide insights into the processes involved in manufacturing specific Mn oxide crystalline structures for engineering applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlling quantum many-body dynamics in driven Rydberg atom arrays

Dynamic stabilization of an array Large-scale systems comprising one-dimensional chains and two-dimensional arrays of excited atoms held in a programmable optical lattice are a powerful platform with which to simulate emergent phenomena. Bluvstein et al. built an array of up to 200 Rydberg atoms and subjected the system to periodic excitation. Under such driven excitation, they found that the array of atoms stabilized, freezing periodically into what looked like time crystals. Understanding and controlling the dynamic interactions in quantum many-body systems lies at the heart of contemporary condensed matter physics and the exotic phenomena that can occur. Science , this issue p. 1355

Science & Technology - Other Topics↗

Crystal-liquid-vapor equilibrium experiments at high temperature (less than or equal to 1800 C) and low, controlled oxygen and hydrogen pressure (10(-1) to 10(-9) PA)

Evidence from carbonaceous chrondrites points to refractory oxides in the system CaO-MgO-Al2O3-TiO2-SiO2-Fe-O as being among the earliest phases to condense from the solar nebula. It is necessary to establish the equilibrium relationships between the relevant crystalline and amorphous phases before the chemical constraints can be meaningfully applied to models of solar system history. Preliminary experiments on earth show that such experiments are feasible. Earth-based experiments suffer from several unavoidable problems. These problems can be overcome by experimentation in the Space Station where the experiments can be conducted under near static pressure conditions and where total pressure equals the sum of controlled hydrogen and oxygen pressures and can be controlled for periods exceeding several hours.

Mysen, B. O.↗

Impacts of sulfonic acids on fungal manganese oxide production

Microbial manganese (Mn) oxidation plays a critical role in Mn(III/IV) oxide formation in modern day environmental systems. These oxidation processes and resulting biominerals are sensitive to aqueous conditions, such as pH and dissolved constituent concentrations. With Mn and sulfur (S) biogeochemical cycling closely linked in many environmental systems, and dissolved organic sulfur comprising a substantial pool of total sulfur in several environments, the impact of dissolved organic sulfur compounds on Mn redox processes is important to consider. Sulfonic acids, environmentally ubiquitous organosulfur compounds, play substantial roles in S cycling in many natural and contaminated systems. Research to assess the effects of these abundant sulfonic acids on Mn biogeochemical cycling, microbial Mn oxidation processes, and Mn biominerals is needed for understanding and predicting the impact of coupled S and Mn biogeochemical cycles, particularly in environments with dynamic redox gradients or in anthropogenically contaminated systems. Further, with research on microbial and abiotic Mn oxidation processes often using aminosulfonic acids to control pH, understanding the impact of such sulfonic acids on microbial Mn oxidation processes is critical. Several recent studies found that commonly used zwitterionic N substituted aminosulfonic acids, known as Good’s buffers, such as HEPES and MES, can alter abiotic birnessite sheet structures. Here we investigate the impact of two sulfonic acids with broad applications to natural and contaminated sites as well as laboratory settings (HEPES and MES) on fungal Mn oxidation relative to a carbonate buffer and a buffer-free control by three Ascomycete fungi known to oxidize Mn(II): Stagonospora sp. SRC1lsM3a, Paraphaeosphaeria sporulosa AP3s5–JAC2a, and Plectosphaerella cucumerina DS2psM2a2. Structural analyses of the products show that sulfonic acids promote Mn oxidation by P. cucumerina, producing hexagonally symmetric phyllomanganates analogous to hexagonal birnessite or c–disordered H + birnessite [(Ca,Na,K)(Mn 4+ ,Mn 3+ ,$\square$)O 2 nH 2 O], with solid–associated Mn(II) bound to vacancy sites and biomass, while in their absence almost all Mn remains as either aqueous Mn(II) or solid–associated Mn(II) bound to biomass. In contrast, sulfonic acids exert the opposite effect on Mn oxidation by P. sporulosa, with their presence suppressing Mn(II) oxidation to Mn(IV), likely leading to the formation of mycogenic bixbyite (Mn 3+ 2 O 3 ) while the buffer–free control forms a poorly crystalline phyllo- or tectomanganate. Meanwhile, all treatments exert a minimal effect on Mn(II) uptake from solution and Mn oxidation with Stagonospora sp., with all experimental systems and controls forming poorly crystalline, hexagonally symmetric phyllomanganates. The fact that the sulfonic acids here studied exert similar effects on Mn oxidation, but substantially different effects for each fungus, suggests they affect Mn oxidation via mechanistically similar pathways that are likely dependent on interactions with fungal exudates (which vary from species to species) or specific fungal Mn oxidation processes. Interestingly, for all fungi, MES increases Mn(III) in the resulting biominerals, while the carbonate buffer consistently decreases Mn(III). Further, these results clearly demonstrate that sulfonic acids not only alter Mn oxide structures, as has been previously noted in abiotic studies, but can interfere with Mn oxidation reactions themselves, highlighting the incredible sensitivity of both Mn oxide structures and the Mn oxidation process to the aqueous environment.

58 GEOSCIENCES↗

Space Application Requirements for Organic Avionics

The NASA Marshall Space Flight Center is currently evaluating polymer based components for application in launch vehicle and propulsion system avionics systems. Organic polymers offer great advantages over inorganic corollaries. Unlike inorganics with crystalline structures defining their sensing characteristics, organic polymers can be engineered to provide varying degrees of sensitivity for various parameters including electro-optic response, second harmonic generation, and piezoelectric response. While great advantages in performance can be achieved with organic polymers, survivability in the operational environment is a key aspect for their practical application. The space environment in particular offers challenges that must be considered in the application of polymer based devices. These challenges include: long term thermal stability for long duration missions, extreme thermal cycling, space radiation tolerance, vacuum operation, low power operation, high operational reliability. Requirements for application of polymer based devices in space avionics systems will be presented and discussed in light of current polymer materials.

Watson, Michael D.↗

Accreting Gas and Dust in Pre-Main Sequence Disk Systems

Infrared spectroscopy of pre-main sequence stars with dusty protostellar disks provide information about the evolution of refractory materials in such systems. These systems exhibit varying degrees of strength and structure in the silicate emission band situated at 10 microns wavelength. Band strength is affected by the mean grain size, while band structure is determined by the chemical composition and degree of crystallinity. In some objects, the silicate band is strong and featureless, similar to that seen in the interstellar medium. In others, the band is often weaker, and exhibits structure consistent with the presence of crystalline olivine. In these latter objects, the band is similar to that of some solar system comets. The strength and structure of the silicate band may be related to the processing history of the system.

Sitko, M. L.↗

Regenerable Iodine Water-Disinfection System

Iodinated resin bed for disinfecting water regenerated to extend its useful life. Water flows through regeneration bed of crystalline iodine during regeneration. At other times, flow diverted around regeneration bed. Although regeneration cycle was manually controlled in demonstration, readily automated to start and stop according to signals and stop according to signals from concentration sensors. Further benefit of regeneration is that regeneration bed provides highly concentrated biocide source (200 mg/L) when needed. Concentrated biocide used to superiodinate system after contamination from routine maintenance or unexpected introduction of large concentration of microbes.

Sauer, Richard L.↗

Temperature Effect of Cesium Exchange onto Crystalline Silicotitanate in AP-107 and AP-105 Hanford Tank Wastes and Two Simulants

Washington River Protection Solutions, LLC (WRPS) is charged with the development of the Tank Side Cesium Removal (TSCR) system to process Hanford tank waste supernates in preparation for vitrification. In addition to a filtration step, TSCR will remove cesium (Cs) using ion exchange columns filled with crystalline silicotitanate (CST) ion exchange media. CST is produced by Honeywell UOP, LLC. The documented safety analysis (DSA) developed for the TSCR system limits a single column loading to 141,600 Ci 137 Cs. Given a 137 Cs isotopic mass fraction of 20% and the planned CST bed size of 596 L (157.5 gal) in a TSCR column, this equates to 0.10 mmole Cs per g CST (Cs distribution coefficient, K d , 1400 mL/g). Factors that influence Cs uptake by CST include (but are not limited to) (1) CST production (lot-to-lot variations), (2) contact temperature, (3) contact duration, (4) competitors in the tank waste feed, (5) anionic composition of the tank waste feed, and (6) the 137 Cs isotopic mass fraction (differs slightly among tank wastes and decreases with time).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗