Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “crystalline rock”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

Astrobiology Investigations at a Martian Hematite Site

Christensen et al, using data from the Mars Global Surveyor Thermal Emission Spectrometer (TES), have identified gray crystalline hematite in a 350 km by 750 km region near Sinus Meridiani. The deposit corresponds closely to the low-albedo highlands unit 'sm', mapped as a wind-eroded, ancient, subaqueous sedimentary deposit. Christensen et al interpreted the Sinus Meridiani deposit to be 'an in-place, rock-stratigraphic sedimentary unit characterized by smooth, friable layers composed primarily of basaltic sediments with approximately 10 to 15 % crystalline gray hematite.' Christensen et al discussed five possible mechanisms for the formation of this deposit: direct precipitation from standing, oxygenated, Fe-rich water; precipitation from Fe-rich hydrothermal fluids; low-temperature dissolution and precipitation through mobile groundwater leaching; surface weathering and coatings; thermal oxidation of magnetite-rich lavas. Four of these mechanisms involve the interactions of rock with water, and thus have implications in the search for evidence of microbial life.

Allen, Carlton, C.↗
NASA NTRS2003

Meridiani Planum Hematite Deposit: Potential for Preservation of Microfossils

Christensen et al., using data from the Mars Global Surveyor Thermal Emission Spectrometer (TES), have identified gray crystalline hematite in a 350 km by 750 km region near Meridiani Planum. The deposit corresponds closely to the low-albedo highlands unit sm, mapped as a wind-eroded, ancient, subaqueous sedimentary deposit. Christensen et al. interpreted the Meridiani Planum deposit to be an in-place, rock-stratigraphic sedimentary unit characterized by smooth, friable layers composed primarily of basaltic sediments with approximately 10 to 15% crystalline gray hematite. The Meridiani Planum hematite deposit has recently been designated as the prime landing site for one of the two Mars Exploration Rover (MER) spacecraft. The MER landings are scheduled for January, 2004. Christensen et al. discussed five possible mechanisms for the formation of this deposit: direct precipitation from standing, oxygenated, Fe-rich water; precipitation from Fe-rich hydrothermal fluids; low-temperature dissolution and precipitation through mobile groundwater leaching; surface weathering and coatings; thermal oxidation of magnetite-rich lavas. Four of these mechanisms involve the interactions of rock with water, and thus have implications in the search for evidence of microbial life.

C C Allen↗
NASA NTRS2012

The Alteration History of Clovis Class Rocks in Gusev Crater as Determined by Ti-Normalzed Mass Balance Analysis

The West Spur Clovis class rocks in Gusev Crater are some of the most altered rocks in Gusev Crater and likely contain a mixed sulfate and phyllosilicate mineralogy [1,2]. The high S and Cl content of the Clovis rocks suggests that acidic vapors or fluids of H2SO4 and HCl reacted with the Clovis parent rock to form Ca, Mg,- sulfates, iron-oxyhydroxides and secondary aluminosilicates (approx.60 wt.%) of a poorly crystalline nature (e.g., allophane) [1]. Up to 14-17 wt.% phyllosilicates (e.g., kaolinite, chlorite, serpentine) are hypothesized to exist in the Clovis materials suggesting that Clovis parent materials while possibly exposed to acidic pHs were likely neutralized by basalt dissolution which resulted in mildly acidic pHs (4-6) [1, 2]. This work proposes that subsequent to the alteration of the Clovis rocks, alteration fluids became concentrated in ions resulting in the addition of silicate and salts. The objective of this work is to utilize Ti-normalized mass balance analysis to evaluate (1) mineral gains and losses and (2) elemental gains and losses in the Clovis rocks. Results of this work will be used evaluate the nature of geochemical conditions that affect phyllosilicate and sulfate formation at Gusev crater.

Sutter, Brat↗
DOE OSTI2024

Measurement of the Static Nonlinear Third-Order Elastic Moduli of Rocks: Problems and Applicability

The third-order elastic (TOE) model has been used to describe the widely observed nonlinear mechanical behaviors of earth materials. In addition to linear elastic constants ( λ , μ ), three nonlinear elastic moduli ( A , B , C ) are required for isotropic rocks. Contrary to previous research on dynamic TOE moduli, this study followed the protocol to measure strain and stress under uniaxial and hydrostatic compressive tests statically, which were later used to invert for the full set of TOE moduli for four standard rock types with differing pore structures of a porous oolitic limestone, quartz-rich sandstones, and a dense crystalline basalt. The applicability of the TOE model to characterize nonlinearity depends on the fulfillment of path-independence and small-strain assumptions. Using the measured static TOE moduli, the finite element model demonstrates that the stress in the vicinity of the wellbore is more amplified than the stress in the linear elastic case, which leads to a wider zone of rock failure around the wellbore. Due to the long-standing discrepancy between static and dynamic moduli, the rarely reported full set of static TOE moduli is necessary and will benefit future research in understanding the effect of rock nonlinearity on geophysical and geomechanical applications, such as long-term safe storage of CO 2 and generating process of geohazards.

58 GEOSCIENCES↗
DOE OSTI2025

Stratigraphy‐Induced Localization of Microseismicity During CO 2 Injection in Illinois Basin

Abstract Subsurface fluid injection stimulates complex hydromechanical interaction, necessitating the integration of geomechanical data across spatial and temporal scales to consider the sophisticated behavior. Induced seismic response is usually associated with the complex reservoir architecture and pre‐existing features that are three‐dimensional, such as local stratigraphy, fractures, faults, and other discontinuities. This study encompasses laboratory characterization of the coupled hydromechanical response of cores extracted from rock formations in Illinois Basin: reservoir ‐ Mt. Simon sandstone, basal seal ‐ Argenta sandstone, and crystalline basement ‐ Precambrian rhyolite. High‐resolution numerical modeling allows considering the three‐dimensional complexity of the Illinois Basin Decatur Project with spatial resolution comparable to one of the active seismic surveys. A detailed reconstruction of the evolving state of stress in formations lacking direct stress measurements is achieved by numerical modeling that integrated laboratory‐derived hydromechanical properties, a porosity‐permeability relationship, active seismic data, and an inverted three‐dimensional porosity distribution. It appears that the microseismic clusters, mainly observed in the crystalline basement during the injection, are linked to zones experiencing more critically stressed conditions prior to injection. These zones have a potential for reactivation during the injection and are attributed to the specific local stratigraphy of the injection site, as well as transfer of triggering perturbations during the injection.

Bondarenko, N. [University of Illinois Urbana‐Cham↗
NASA NTRS1973

Utilizing ERTS-A imagery for tectonic analysis through study of Big Horn Mountains region

The author has identified the following significant results. MSS scene 1085-17294 of the Big Horn region has been subjected to detailed structural analysis. Band 7 is particularly good for revealing structural and drainage patterns because of enhance topographic detail and the subdued vegetational contrasts. Considerable stereo coverage through sidelap with adjoining scenes adds to the effectiveness of the study and has been used on both positive transparencies and enlarged prints. Negative prints of Band 7 positive transparencies have proven to be much more useful than positive prints because the higher resolution of the positive transparencies can be maintained. The Bighorn Mountains are crisscrossed by a number of prominent topographic linears, most of which can be correlated with known fault and shear zones in the Precambrian crystalline core. Many of these do not appear to continue into the flanking sedimentary rocks and a few that do (Tensleep, Tongue River lineaments) are very difficult to trace farther out into the basins. The Tongue River lineament, long a source of speculation and uncertainty as to its existence, appears as a very prominent discontinuity in the imagery.

Hoppin, R. A.↗
NASA NTRS1974

Scanning electron microscopy of lunar regolith from the Sea of Fertility

Scanning electron microscopy was used in studying the morphology and cathodoluminescence of lunar regolith particles. Surface and structure of two groups of particles are differentiated: (1) Crystalline with well defined facets and spalling surfaces, which are grains of minerals and rock fragments: and (2) amorphous, fused, and partially or entirely glazed particles. Local melting of particles and the round openings on their surfaces are attributed to secondary influence on the regolith of factors of lunar weathering and above all micrometeoric impacts.

Antoshin, M. K.↗
NASA NTRS1974

Lunar mascons - Another model and its implications

A mascon model is proposed in which the mass excess of the mare basalts in the circular maria is supported isostatically by mass deficits at depth. The model predicts the observed positive gravity anomalies surrounded by negative ring anomalies and explains the absence of gravity anomalies over the irregular maria. The model implies that mare basalts were derived by partial melting of a source region at depth due to pressure relief resulting from the excavation of the circular mare basins, and that the crystalline residuum in the source region is of lower density than the original source rock. The trace element enrichment and near cotectic character of Apollo 11 and 12 lavas reported by some investigators may be caused by extensive magma fractionation enroute from an origin in the circular maria to the final, distant emplacement sites.

Kunze, A. W. G.↗
NASA NTRS1978

Origin and modal petrography of Luna 24 soils

Petrographic modal analyses of polished grain mounts of fractions in the 20 to 250 micron size range from Luna 24 soil samples are presented and used to infer the nature and relative contributions of source rocks. It is found that more than 90% of the identifiable rock fragments are mare basalts, with about 11% of the soil consisting of the crystalline form. Soil breccias, which make up nearly 10% of the soil, are found to be immature. Electron probe analysis of glass particles reveals principle clusters conforming to anorthosite, anorthositic gabbro and mare basalts. More than half of the soil is composed of monomineralic particles, with pyroxene as the most abundant mineral. It is concluded that 85% of the regolith is derived from local mare basalts and gabbros and about 10% is derived from early cumulates of local mare basalt magma. Highland sources are considered to contribute not more than 3% of the regolith.

Basu, A.↗
NASA NTRS2015

Constraining the Texture and Composition of Pore-Filling Cements at Gale Crater, Mars

The Mars Science Laboratory (MSL) rover Curiosity has encountered a wide variety of sedimentary rocks deposited in fluvio-lacuestrine sequences at the base of Gale Crater. The presence of sedimentary rocks requires that initial sediments underwent diagenesis and were lithified. Lithification involves sediment compaction, cementation, and re-crystallization (or authigenic) processes. Analysis of the texture and composition of the cement can reveal the environmental conditions when the cements were deposited, enabling better understanding of early environments present within Gale Crater. The first step in lithification is sediment compaction. The Gale crater sediments do not show evidence for extensive compaction prior to cementation; the Sheepbed mudstone in Yellowknife Bay (YKB) has preserved void spaces ("hollow nodules"), indicating that sediments were cemented around the hollow prior to compaction, and conglomerates show imbrication, indicating minimal grain reorganization prior to lithification. Furthermore, assuming the maximum burial depth of these sediments is equivalent to the depth of Gale Crater, the sediments were never under more than 1 kb of pressure, and assuming a 15 C/km thermal gradient in the late Noachian, the maximum temperature of diagenesis would have been approximately 75 C. This is comparable to shallow burial diagenetic conditions on Earth. The cementation and recrystallization components of lithification are closely intertwined. Cementation describes the precipitation of minerals between grains from pore fluids, and recrystallization (or authigenesis) is when the original sedimentary mineral grains are altered into secondary minerals. The presence of authigenic smectites and magnetite in the YKB formation suggests that some recrystallization has taken place. The relatively high percentage of XRD-amorphous material (25-40%) detected by CheMin suggests that this recrystallization may be limited in scope, and therefore may not contribute significantly to the cementing material. However, relatively persistent amorphous components could exist in the Martian environment (e.g. amorphous MgSO4), so recrystallization, including loss of crystallinity, cannot yet be excluded as a method of cementation. In order to describe the rock cementation, both the rock textures and their composition must be considered. Here, we attempt to summarize the current understanding of the textural and compositional aspects of the cement across the rocks analyzed by Curiosity to this point.

Siebach, K. L.↗
DOE OSTI2022

Evaluation of crystalline quality of traveling heater method (THM) grown Cd0.9Zn0.1Te0.98Se0.02 crystals

Because of its excellent opto-electronic properties, CdZnTe (CZT) has been the material of choice for x- and gamma-ray detectors operable at room temperature. CZT is the leading commercially available room-temperature radiation detector material today. Although much progress has been made over the past three decades, today's CZT crystals still face certain challenges, especially the presence of the performance-limiting materials defects and the associated relatively high production cost. In this regard, CdxZn1−xTeySe1−y (CZTS) is emerging as a next-generation compound semiconductor, which overcomes some of the limitations of CZT technology for the stated applications. Here, we conducted a study to evaluate the crystalline quality of the traveling heater method grown CZTS with an optimized alloy composition, i.e., Cd0.9Zn0.1Te0.98Se0.02. The as-grown samples were evaluated by low-temperature photoluminescence (PL) spectroscopy and high-resolution x-ray diffraction using the synchrotron light source at Brookhaven National Laboratory. The full width at half maximum of both the PL and x-ray rocking curves was observed to be broadened due to the lattice disorder of the quaternary compound, eventually degrading the crystalline quality. This was consistent with density functional theory calculations.

Roy, U. N. (ORCID:0000000282089680)↗
NASA NTRS1977

Effects of shock pressures on calcic plagioclase

Calcic plagioclase single crystals were subjected to shock loading up to a pressure of 496 kbar; optical and electron microscope studies were conducted to investigate the shock-induced effects on the mineral, which is found in terrestrial and lunar rocks and in meteorites. It was observed that up to 287 kbar pressure, the recovered samples are essentially crystalline, while samples subjected to pressures between 300 and 400 kbar are almost 100% diaplectic glasses, suggesting shock transformation in the solid state. Samples shock-loaded to pressures greater than 400 kbar yielded glasses with refractive indices similar to those of thermally fused glass. It is concluded that planar features, absent in all the specimens, may not be definitive shock indicators, but may be linked to local heterogeneous dynamic stresses experienced by plagioclase grains within shocked rocks.

Gibbons, R. V.↗
DOE OSTI2025

Nucleation-promoting and growth-limiting synthesis of disordered rock-salt Li-ion cathode materials

Disordered rock-salt oxides and oxyfluorides are promising positive electrode materials for high-performance lithium-ion batteries free of nickel and cobalt. However, conventional synthesis methods rely on post-synthesis pulverization to achieve cycling-appropriate particle sizes, offering limited control over particle microstructure and crystallinity. This accelerates degradation and complicates secondary particle processing. Here we present a synthesis strategy that enhances nucleation while suppressing particle growth and agglomeration across various disordered rock-salt compositions, including lithium–manganese–titanium oxide, lithium–manganese–niobium oxide, and lithium–nickel–titanium oxide systems. Applied to Li 1.2 Mn 0.4 Ti 0.4 O 2 , this method yields highly crystalline, well-dispersed sub-200 nm particles that form homogeneous electrode films with stable cycling behavior. Tested in cells with lithium metal as the counter electrode, these electrodes deliver ~200 mAh/g with 85% capacity retention relative to the first cycle after 100 cycles (20 mA/g, 1.5–4.8 V), and an average discharge voltage loss of 4.8 mV per cycle, compared to 38.6% retention and 7.5 mV loss per cycle for electrodes derived from pulverized solid-state particles. This approach suggests a route to enhance the performance and durability of disordered rock-salt electrodes for sustainable lithium-ion batteries.

Batteries↗
NASA NTRS1974

Lunar highland rock types: Their implications for impact induced fractionation

The first step in a petrologic study must be a classification based on observed textures and mineralogy. Lunar rocks, may be classified into three major groups: (1) coarse-grained igneous rocks, (2) fine-grained igneous rocks and (3) breccias. Group 1 is interpreted as primitive lunar crustal rocks that display various degrees of crushing and/or annealing. Group 2 is interpreted as volcanic rocks. Group 3 is interpreted as resulting from impacts on the lunar surface and is subdivided on the basis of matrix textures into fragmental breccias, crystalline breccias that have been annealed, and crystalline breccias with igneous matrices. A synthesis of the relevant data concerning lunar highlands polymict breccias from the fields of petrography, chemistry, photogeology, and impact studies compels the prediction that the breccias should have homogeneous matrices from rock to rock within regions of the highlands of limited size where impact mixing has been efficient and extensive.

Phinney, W. C.↗
DOE OSTI2025

New K-feldspar Pb isotope results for Mesozoic arc crust in the Pacific Northwest, U.S.A. and Canada: comparison with the Mojave-Salinia province of southern California and Implications for Baja-BC

Measurements of lead isotopic compositions in detrital K-feldspar have been increasingly used as a tool to assess sediment provenance. We compiled a database of previously published Pb isotope data from 700 bedrock K-feldspar samples and 1,423 age-corrected bedrock whole rock samples from western North American igneous and metamorphic bodies. Additionally, we report 66 new K-feldspar Pb isotope data for plutons throughout the Pacific Northwest region of the United States and British Columbia. Results show that the Pb isotope values of plutonic K-feldspar depend on the isotopically juvenile or evolved nature of underlying crust. Samples obtained from the mid Cretaceous – mid Eocene Coast Plutonic Complex, North Cascades, and Intermontane superterrane that occur west of the initial 87 Sr/ 86 Sr (Sri) = 0.706 isopleth exhibit a highly restricted 207 Pb/ 206 Pb and 208 Pb/ 206 Pb values centred upon 0.83 and 2.03, respectively. Conversely, rocks overlying older continental crust further east such as the Middle Jurassic – Late Cretaceous Omineca crystalline belt, Idaho batholith, and Boulder Batholith exhibit far greater variation of Pb isotope values that parallel the 100 Ma isochron calculated from a two-stage Pb evolution model. We demonstrate that Pb isotopic results from the Idaho and Boulder Batholith region can be used to define distinctive subregions for Pb isotopic provenance analysis, and compare these signatures to the Mojave-Salinian batholith of southern California and western Arizona, as these two areas have previously been proposed as source regions for extraregional sediment that was deposited within the Nanaimo Basin during the Campanian – Maastrichtian. Future Pb isotopic analysis of detrital K-feldspar from the Nanaimo Basin of southwestern British Columbia may effectively distinguish between potential extraregional sources separated by thousands of kilometres.

Coast Plutonic Complex↗
DOE OSTI2024

Compositional zoning of the Otowi Member of the Bandelier Tuff, Valles caldera, New Mexico, USA

The Otowi Member of the Bandelier Tuff erupted at ca. 1.60 Ma from the Valles caldera (New Mexico, USA). It consists of as much as 400 km 3 (dense rock equivalent) of strongly differentiated high-silica rhyolite and shows systematic upward variations in crystallinity, mineral chemistry, and trace element concentrations through its thickness, but the major element composition is almost constant and is near the low-pressure granite minimum. Incompatible trace elements in whole pumice fragments and glasses show well-correlated linear covariations. Upward zoning to lower abundances of incompatible trace elements is accompanied by development of overgrowths on quartz and alkali feldspar, although earlier-formed interiors of quartz and feldspar have near-constant compositions throughout the tuff, modified by cation diffusion in the case of feldspar. Melt inclusions in remnant quartz cores show diverse Pb isotope ratios, pointing to a wide range of distinct protoliths that contributed rhyolitic melt to the Otowi magma. Mineral thermometers suggest a modest temperature gradient through the melt body, perhaps of 40 °C, at the time of eruption. Chemical, textural, and mineralogical variations and volume-composition relations through the tuff are consistent with an origin for zoning by melting of a high-crystallinity cumulate layer beneath cognate supernatant liquid to produce denser, remobilized liquid of accumulative composition (i.e., the “modified mush model”). Melting may have occurred in several episodes. The latest of these episodes, probably thousands of years prior to eruption, introduced new rhyolitic liquid into the system and was associated with a thermal excursion, recorded in core compositions of pyroxene, during which much of the earlier crystal mass was dissolved. This left inherited cores and interiors of accumulated quartz and feldspar mantled with new growth having less-evolved compositions (higher Ti, Sr, and Ba). Changing solubility of zircon during cumulate melting produced a reversal of Zr concentrations. There is no clear petrologic evidence of a recharge eruption trigger; nonetheless, compositional zoning resulted mainly from repeated recharge-induced remobilization of quartz-feldspar cumulate. The Otowi system was built, evolved, and modified by several events over the course of a few hundred thousand years.

Wolff, J. A.↗
NASA NTRS1973

Apollo 17 lunar samples - Chemical and petrographic description

Some of the Apollo 17 rocks have the cataclastic, highly crushed textures common in the Apollo 16 return. Many are crystalline breccias whose petrographic characteristics indicate varying degrees of recrystallization or partial melting. Others are friable and dark gray like the many regolith breccias of previous missions. A few have the coarse-grained igneous textures typically developed during the slow crystallization from basaltic melts. Petrographic and soil characteristics are discussed together with the results of X-ray fluorescence analyses.

Source record↗
NASA NTRS2018

Amorphous Phase Characterization Through X-Ray Diffraction Profile Modeling: Implications for Amorphous Phases in Gale Crater Rocks and Soils

The CheMin X-ray diffraction instrument on the Mars Science Laboratory rover has analyzed 18 rock and soil samples in Gale crater. Diffraction data allow for the identification of major crystalline phases based on the positions and intensities of well-defined peaks and also provides information regarding amorphous and poorly-ordered materials based on the shape and positions of broad scattering humps. The combination of diffraction data, elemental chemistry from APXS (Alpha Particle X-ray Spectrometer) and evolved gas analyses (EGA) from SAM (Sample Analysis at Mars) help constrain possible amorphous materials present in each sample (e.g., glass, opal, iron oxides, sulfates) but are model dependent. We present a novel method to characterize amorphous material in diffraction data and, through this approach, aim to characterize the phases collectively producing the amorphous profiles in CheMin diffraction data. This method may be applied to any diffraction data from samples containing X-ray amorphous materials, not just CheMin datasets, but we re-strict our discussion to Martian-relevant amorphous phases and diffraction data measured by CheMin or CheMin-like instruments.

Achilles, C. N.↗