Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “continuum modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

High-energy continuum emission from solar flares

The properties of solar flare continuum emission at energies of greater than 300 keV have been determined from observations obtained during the 21st solar maximum by gamma-ray detectors aboard the SMM and Hinotori satellites. The temporal structure of the high-energy continuum is modeled by two-step acceleration and particle trapping. The results suggest that the very high-energy emission noted must be a mixture of pion-decay radiation and primary electron bremsstrahlung.

Vestrand, W. Thomas↗
NASA NTRS1991

Faint object spectrograph observations of the low-luminosity Seyfert galaxy NGC 1566

FOS observations of the Seyfert galaxy NGC 1566 show it to possess the broad lines characteristic of a typical Seyfert 1 galaxy, even in states of very low luminosity. The continuum, however, is steep with no suggestion of the ultraviolet excess seen in higher luminosity AGNs. The broad emission lines have symmetric profiles, but are redshifted by 200-1000 km/s relative to the systemic velocity. The broad-line ratios indicate a low ionization parameter, and the strength of lines such as Fe II, Mg II, and the Balmer continuum relative to the UV continuum supports models for X-ray heating of the broad-line cloud interiors.

Kriss, G. A.↗
NASA NTRS1990

Photodissociation regions

Photodissociation regions are interstellar regions of predominantly neutral gas where the FUV radiation field plays a significant role in the chemistry and/or the heating. Photodissociation, grain attenuation of the FUV flux and grain photoelectric heating lead to copious emission of C II (158 microns), O I (63 microns), Si II (35 microns), C I (370,609 microns), H2 vibrotational and CO rotational transitions, and IR continuum. Theoretical models compared with observations diagnose such physical parameters as the density and temperature structure, the elemental abundances, and the FUV radiation field. Applications are made to Orion, M17 and galactic nuclei. Theoretical photodissociation models can explain the correlation in the C II (158 microns) and CO J = 1-0 emission and the correlation of the CO J = 1-0 luminosity with the molecular mass. Theoretical models also point to feedback mechanisms which may control the rate of star formation in galaxies and which may regulate the column density through giant molecular clouds.

Hollenbach, David J.↗
NASA NTRS1995

Robust Rocket Engine Concept

The potential for a revolutionary step in the durability of reusable rocket engines is made possible by the combination of several emerging technologies. The recent creation and analytical demonstration of life extending (or damage mitigating) control technology enables rapid rocket engine transients with minimum fatigue and creep damage. This technology has been further enhanced by the formulation of very simple but conservative continuum damage models. These new ideas when combined with recent advances in multidisciplinary optimization provide the potential for a large (revolutionary) step in reusable rocket engine durability. This concept has been named the robust rocket engine concept (RREC) and is the basic contribution of this paper. The concept also includes consideration of design innovations to minimize critical point damage.

Lorenzo, Carl F.↗
NASA NTRS1994

Pre- and postperihelon abundances of gas and dust in comet Halley

Photometrically calibrated spectra of comet P/Halley (1986 III) were recorded between 1985 September 12-1986 June 10 using the Ohio State University Image Dissector Scanner on the Perkins 72 inch telescope at the Lowell Observatory. Column densities of CN, C3, CH, C2, and NH2 were calculated from measured fluxes in these spectra, and molecular scale lengths were deduced from the radial distribution of CN, C3, C2, and NH2. Production rates were computed using the new scale lengths and a Haser model analysis. Continuum emission at 4260 A was used to derive gas-to-dust ratios. The data indicate than comet Halley was approximately 2-5 times more abundant in gas and dust at postperihelion than preperihelion. On 1986 June 8 we observed the onset of a cometary ourburst which appeared very strong in dust production. The gas-to-dust ratios appeared to be subject to changes as a result of short-term outbursts but otherwise did not exhibit any systematic dependence on heliocentric distance. Reflectivity gradients of the continuum were also measured from the spectra. While most of the continua were red, blue continua were also observed which may be correlated with dust outbursts.

Womack, Maria↗
NASA NTRS1998

Exploring the Full Range of Properties of Quasar Spectral Distributions

The aim of this work is to support our ISO, far-infrared (IR) observing program of quasars and active galaxies. We have obtained, as far as possible, complete spectral energy distributions (radio-X-ray) of the ISO sample in order to fully delineate the continuum shapes and to allow detailed modelling of that continuum. This includes: ground-based optical, near-IR and mm data, the spectral ranges closest to the ISO data, within 1-2 years of the ISO observations themselves. ISO was launched in Nov 1995 and is currently observing routinely. It has an estimated lifetime is 2 years. All near-IR and optical imaging and spectroscopy are now in hand and in the process of being reduced, mm data collection and proposal writing continues.

Wilkes, B.↗
NASA NTRS1999

Exploring the Full Range of Properties of Quasar Spectral Distribution

The aim of this work is to obtain multi-wavelength supporting data for the sample of quasars and active galaxies observed in the far-infrared (IR) by ISO as part of our Key Project on quasars and active galaxies. This dataset then provides complete spectral energy distributions (radio-X-ray) of the ISO sample in order to fully delineate the continuum shapes and to allow detailed modeling of that continuum. The report is made up of a short project summary, and a bibliography of published papers, proceedings and presentations.

Wilkes, B.↗
NASA NTRS2007

A Stellar-mass Black Hole in the Ultra-luminous X-ray Source M82 X-1

We have analyzed the archival XMM-Newton data of the archetypal Ultra-Luminous X-ray Source (ULX) M82 X-1 with an LO5 ksec exposure when the source was in the steady state. Thanks to the high photon statistics from the large effective area and long exposure, we were able to discriminate different X-ray continuum spectral models. Neither the standard accretion disk model (where the radial dependency of the disk effective temperature is T(r) proportional to r(sup -3/4)) nor a power-law model gives a satisfactory fit. In fact, observed curvature of the M82 X-1 spectrum was just between those of the two models. When the exponent of the radial dependence (p in T(r) proportional to r(sup -P)) of the disk temperature is allowed to be free, we obtained p = 0.61 (sup +0.03)(sub -0.02). Such a reduction of p from the standard value 3/4 under extremely high mass accretion rates is predicted from the accretion disk theory as a consequence of the radial energy advection. Thus, the accretion disk in M82 X-1 is considered to be in the Slim disk state, where an optically thick Advection Dominant Accretion Flow (ADAF) is taking place. We have applied a theoretical slim disk spectral model to M82 X-1, and estimated the black hole mass approximately equal to 19 - 32 solar mass. We conclude that M82 X-1 is a stellar black hole which has been produced through evolution of an extremely massive star, shining at a several times the super-Eddington luminosity.

Okajima, Takashi↗
NASA NTRS2008

Growth Control and Disease Mechanisms in Computational Embryogeny

This paper presents novel approach to applying growth control and diseases mechanisms in computational embryogeny. Our method, which mimics fundamental processes from biology, enables individuals to reach maturity in a controlled process through a stochastic environment. Three different mechanisms were implemented; disease mechanisms, gene suppression, and thermodynamic balancing. This approach was integrated as part of a structural evolutionary model. The model evolved continuum 3-D structures which support an external load. By using these mechanisms we were able to evolve individuals that reached a fixed size limit through the growth process. The growth process was an integral part of the complete development process. The size of the individuals was determined purely by the evolutionary process where different individuals matured to different sizes. Individuals which evolved with these characteristics have been found to be very robust for supporting a wide range of external loads.

Genetic algorithm↗
NASA NTRS2017

Growth Angle: A Microscopic View

A microscopic continuum mechanical model of the growth angle is proposed. It is based on the van der Waals type framework that is used for surface force phenomena. The obtained augmented Laplace type integro-differential equations are, in general, difficult to analyze. Here we focused primarily on the particular case of equal melt and crystal surface energies. We derived an approximate equation for the meniscus shape, and obtained an analytical relationship between the contact and the growth angle. Interestingly, the same result can be obtained using the macroscopic model of Herring. The case of a macroscopically sharp corner is also considered. For this case, the macroscopic angle is not defined and it can be any angle between the contact angles of both flat surfaces. The microscopic model yields the smooth shape for the meniscus that also is not unique, but depends on the initial position of the meniscus.

Mazuruk, Konstantin↗
NASA NTRS1982

Theoretical quasar emission-line ratios. V - Balmer continuum emission

Isothermal, isobaric models of quasar emission line regions are presented which include an improved treatment of radiative transfer in the bound-free continua, based on a generalization of frequency-integrated line transfer techniques and on the use of a probabilistic radiative transfer equation which explicitly distinguishes between the flux divergence coefficient and the photon escape probability. It is found that Balmer continuum emission can be obtained without compromising observed line ratios. It is also established that optically thin or thick Balmer continuum emission models with blended Fe II line are consistent with 4000-2000 A 'blue bump' observations, and that the improved radiative transfer treatment makes order-of-magnitude corrections to level populations and local cooling rates calculated with past techniques.

Puetter, R. C.↗
NASA NTRS2008

Multiscale Modeling of Intergranular Fracture in Aluminum: Constitutive Relation For Interface Debonding

Intergranular fracture is a dominant mode of failure in ultrafine grained materials. In the present study, the atomistic mechanisms of grain-boundary debonding during intergranular fracture in aluminum are modeled using a coupled molecular dynamics finite element simulation. Using a statistical mechanics approach, a cohesive-zone law in the form of a traction-displacement constitutive relationship, characterizing the load transfer across the plane of a growing edge crack, is extracted from atomistic simulations and then recast in a form suitable for inclusion within a continuum finite element model. The cohesive-zone law derived by the presented technique is free of finite size effects and is statistically representative for describing the interfacial debonding of a grain boundary (GB) interface examined at atomic length scales. By incorporating the cohesive-zone law in cohesive-zone finite elements, the debonding of a GB interface can be simulated in a coupled continuum-atomistic model, in which a crack starts in the continuum environment, smoothly penetrates the continuum-atomistic interface, and continues its propagation in the atomistic environment. This study is a step towards relating atomistically derived decohesion laws to macroscopic predictions of fracture and constructing multiscale models for nanocrystalline and ultrafine grained materials.

Yamakov, V.↗
NASA NTRS1990

Gamma rays from active galactic nuclei

The general properties of Active Galactic Nuclei (AGN) and quasars are reviewed with emphasis on their continuum spectral emission. Two general classes of models for the continuum are outlined and critically reviewed in view of the impending GRO (Gamma Ray Observatory) launch and observations. The importance of GRO in distinguishing between these models and in general in furthering the understanding of AGN is discussed. The very broad terms the status of the current understanding of AGN are discussed.

Kazanas, Demosthenes↗
NASA NTRS1994

Computing Incompressible Flows With Free Surfaces

RIPPLE computer program models transient, two-dimensional flows of incompressible fluids with surface tension on free surfaces of general shape. Surface tension modeled as volume force derived from continuum-surface-force model, giving RIPPLE both robustness and accuracy in modeling surface-tension effects at free surface. Also models wall adhesion effects. Written in FORTRAN 77.

Kothe, D.↗
NASA NTRS2004

Constitutive Modeling of Crosslinked Nanotube Materials

A non-linear, continuum-based constitutive model is developed for carbon nanotube materials in which bundles of aligned carbon nanotubes have varying amounts of crosslinks between the nanotubes. The model accounts for the non-linear elastic constitutive behavior of the material in terms of strain, and is developed using a thermodynamic energy approach. The model is used to examine the effect of the crosslinking on the overall mechanical properties of variations of the crosslinked carbon nanotube material with varying degrees of crosslinking. It is shown that the presence of the crosslinks has significant effects on the mechanical properties of the carbon nanotube materials. An increase in the transverse shear properties is observed when the nanotubes are crosslinked. However, this increase is accompanied by a decrease in axial mechanical properties of the nanotube material upon crosslinking.

Odegard, G. M.↗
NASA NTRS2007

Elastic Response and Failure Studies of Multi-Wall Carbon Nanotube Twisted Yarns

Experimental data on the stress-strain behavior of a polymer multiwall carbon nanotube (MWCNT) yarn composite are used to motivate an initial study in multi-scale modeling of strength and stiffness. Atomistic and continuum length scale modeling methods are outlined to illustrate the range of parameters required to accurately model behavior. The carbon nanotubes yarns are four-ply, twisted, and combined with an elastomer to form a single-layer, unidirectional composite. Due to this textile structure, the yarn is a complicated system of unique geometric relationships subjected to combined loads. Experimental data illustrate the local failure modes induced by static, tensile tests. Key structure-property relationships are highlighted at each length scale indicating opportunities for parametric studies to assist the selection of advantageous material development and manufacturing methods.

Gates, Thomas S.↗