Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cloud radiative effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Radiative Forcing of Nitrate Aerosols From 1975 to 2010 as Simulated by MOSAIC Module in CESM2-MAM4

In this work, we incorporate the Model for Simulating Aerosol Interactions and Chemistry (MOSAIC) module in the Community Earth System Model version 2 (CESM2) Community Atmosphere Model Version 6 with interactive chemistry (CAM6-chem), and couple it with the four mode version of the Modal Aerosol Module (MAM4). The MOSAIC module is used to simulate the thermodynamics of the gas-aerosol mass exchange, with a special focus on simulating nitrate aerosol. By comparing against ground and satellite observations, we found that the MOSAIC/MAM4 scheme performs reasonably well in simulating spatiotemporal distributions of aerosols, including nitrate aerosol. We conducted a series of model experiments with and without nitrate aerosols, and examined the radiative effect (RE) associated with nitrate aerosols in 1975, 2000, and 2010, and accessed the radiative forcing (RF) of nitrate aerosols between the present day and pre-industrial periods. Comparing with the nitrate aerosol RE, we predicted relatively small RF of anthropogenic nitrate aerosol from aerosol-radiation interactions (RF ari : -0.014 W m -2 ) and large RF from aerosol-cloud interactions (RF aci : -0.219 W m -2 ). Regional signatures of nitrate RE/RF are noticeable and important: for instance, very small changes in RE ari in Europe and USA, but 2.8–3 times increases in RE ari in India and China from 1975 to 2010, while RE aci /RF aci in China is a warming effect due to the competing effect between sulfate and nitrate aerosols as cloud condensation nuclei.

54 ENVIRONMENTAL SCIENCES↗

Retrieved Number Concentration of Cloud Condensation Nuclei (RNCCN) Profile Value-Added Product Report

The cloud condensation nuclei (CCN) concentration at cloud base is the most relevant measure of the aerosol that influences droplet formation in clouds. Since the CCN concentration depends on supersaturation, a more general measure of the CCN concentration is the CCN spectrum (values at multiple supersaturations). The CCN spectrum is now measured at the surface at several U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility observatories and by the ARM Mobile Facility (AMF) but is not measured at the cloud base. Rather than rely on expensive aircraft measurements for all studies of aerosol effects on clouds, a way to project CCN observations made at the surface to cloud base is needed. Remote sensing of aerosol extinction provides information about the vertical profile of the aerosol but cannot be directly related to the CCN concentration because the aerosol extinction is strongly influenced by humidification, particularly near cloud base. Ghan and Collins (2004) and Ghan et al. (2006) propose a method to remove the influence of humidification from the extinction profiles and tie the “dry extinction” retrieval to the surface CCN concentration, thus estimating the CCN profile. This methodology has been implemented as ARM’s Retrieved Number Concentration of CCN (RNCCN) Profile Value-Added Product (VAP).

54 ENVIRONMENTAL SCIENCES↗

The impacts of biomass burning activities on convective systems over the Maritime Continent

Convective precipitation associated with Sumatra squall lines and diurnal rainfall over Borneo is an important weather feature of the Maritime Continent in Southeast Asia. Over the past few decades, biomass burning activities have been widespread during summertime over this region, producing massive fire aerosols. These additional aerosols, when brought into the atmosphere, besides influencing the local radiation budget through directly scattering and absorbing sunlight, can also act as cloud condensation nuclei or ice nuclei to alter convective clouds and precipitation over the Maritime Continent via so-called aerosol indirect effects. Based on 4-month simulations with or without biomass burning aerosols, conducted using theWeather Research and Forecasting model coupled with a chemistry module (WRFChem), we have investigated the aerosol–cloud interactions associated with biomass burning aerosols over the Maritime Continent. Results from selected cases of convective events have specifically shown the significant impact of fire aerosols on weak convections by their increasing of the quantities of hydrometeors and rainfall in both the Sumatra and Borneo regions. Statistical analysis over the fire season also suggests that fire aerosols have impacts on the nocturnal convections associated with the local anticyclonic circulation in western Borneo and weaken nocturnal rainfall intensity by about 9 %. Such an effect is likely to have come from the near-surface heating due to absorbing aerosols emitted from fires, which could weaken land breezes and thus the convergence of anticyclonic circulation.

54 ENVIRONMENTAL SCIENCES↗

Advancing the Understanding of Cloud Microphysical Processes and Aerosol Indirect Effects in High-Latitude Mixed-Phase Clouds by Linking ARM Measurements with Climate Model Simulations (Final Report)

The key objectives of this project were to advance our understanding of cloud microphysical characteristics and aerosol indirect effects on mixed-phase clouds in high latitudes. To improve the representation of ice and mixed-phase clouds in Earth System Models (ESMs), we propose an integrated observation and modeling study of cloud macro- and microphysical properties, including spatial heterogeneities, mass partitioning between ice crystals and supercooled liquid water, effects of ice nucleating particles (INPs), and efficiency of secondary ice production (SIP), etc. Specifically, we took four main approaches in this project: (1) examining macro- and microphysical properties of ice and mixed-phase clouds based on in-situ and ground-based observations from multiple field campaigns funded by the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) program, including the Mixed-Phase Arctic Cloud Experiment (M-PACE), Indirect and Semi-Direct Aerosol Campaign (ISDAC), Ice Nucleating Particle Sources at Oliktok Point (INPOP), ARM West Antarctic Radiation Experiment (AWARE), Measurements of Aerosols, Radiation, and Clouds over the Southern Ocean (MARCUS), and Macquarie Island Cloud and Radiation Experiment (MICRE); (2) evaluating the DOE Energy Exascale Earth System Model (E3SM) simulations based on observations, particularly for ice and mixed-phase cloud microphysical properties; (3) examining the impacts of INPs on ice and mixed-phase clouds. Specifically, a series of comparisons were conducted using observations over the Arctic, Southern Ocean, and Antarctica, including comparisons between the lower and higher southern latitudes as well as comparisons between the northern and southern hemispheres. In addition, aerosol indirect effects from distinct sources of dust particles were examined; and (4) investigating the impacts of SIP. Ultimately, these results helped to improve cloud microphysics and aerosol-cloud interaction parameterizations in the E3SM model. Overall, the project provided improved understanding regarding various factors, including thermodynamic, dynamic, and aerosol conditions, on the micro- and macrophysical properties of ice and mixed-phase clouds in the high latitudes. Resulting analysis helped to provide an improved physical basis for refining the current cloud microphysics parameterizations related to ice and mixed-phase clouds in E3SM.

54 ENVIRONMENTAL SCIENCES↗

Global Impacts of Marine Methanethiol Emissions and Chemistry in the Atmosphere

Oceanic emissions of dimethyl sulfide (DMS) have long been known to influence aerosol particle composition, cloud condensation nuclei (CCN) concentration, and Earth’s radiative budget. However, the impact of oceanic emissions of methanethiol (MeSH), a sulfur compound produced by the same oceanic precursor as DMS, has been relatively less explored. The gas-phase oxidation of MeSH has a higher effective yield of SO 2 and a shorter oxidative lifetime compared to DMS, highlighting the relevance of this pathway for the modeled representation of particle formation, growth, and CCN abundance in the marine atmosphere. Here, we use the global chemical transport model GEOS-Chem to explore possible scenarios representative of specific environmental conditions and MeSH emission schemes based on previous experimental studies. We further implement and test previously reported chemical mechanisms for MeSH oxidation, along with additional improvements, highlighting key uncertainties and sensitivities for regional and global sulfur budgets. We place our results in the context of recent modeling updates to DMS chemistry and cloud processing, which further impact SO 2 production in the marine atmosphere in parallel with MeSH oxidation. Within the overall marine sulfur budget, our findings highlight that MeSH plays a significant role in SO 2 production in the marine atmosphere, contributing to regional surface layer concentration increases of up to 40–60%. These results point to the importance of MeSH for efforts aimed at improving the modeled representation of sulfur spatiotemporal patterns relevant to air quality predictions and climate impact assessments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Distortions of the Rain Distribution With Warming, With and Without Self-Aggregation

We investigate how mesoscale circulations associated with convective aggregation can modulate the sensitivity of the hydrologic cycle to warming. We quantify changes in the full distribution of rain across radiative-convective equilibrium states in a cloud-resolving model. For a given Sea Surface Temperature (SST), the shift in mean rainfall between disorganized and organized states is associated with a shift in atmospheric radiative cooling, and is roughly analogous to the effect of a 4K SST increase. With rising temperatures, the increase in mean rain rate is insensitive to the presence of organization, while extremes can intensify faster in the aggregated state, leading to a faster amplification in the sporadic nature of rain. When convection aggregates, heavy rain is enhanced by 20%–30% and nonlinear behaviors are observed as a function of SST and strength of aggregation feedbacks. First, radiative- and surface-flux aggregation feedbacks have multiplicative effects on extremes, illustrating a non-trivial sensitivity to the degree of organization. Second, alternating Clausius-Clapeyron and super-Clausius-Clapeyron regimes in extreme rainfall are found as a function of SST, corresponding to varying thermodynamic and dynamic contributions, and a large sensitivity to precipitation efficiency variations in some SST ranges. The potential for mesoscale circulations in amplifying the hydrologic cycle is established. However, these nonlinear distortions question the quantitative relevance of idealized self-aggregation. This calls for a deeper investigation of relationships which capture the coupling between global energetics, aggregation feedbacks and local convection, and for systematic tests of their sensitivity to domain configurations, surface boundary conditions, microphysics, and turbulence schemes.

54 ENVIRONMENTAL SCIENCES↗

Image masks of global ship tracks for NASA MODIS data products

Ship tracks, long thin artificial cloud features formed from the pollutants in ship exhaust, are satellite-observable examples of aerosol-cloud interactions (ACI) that can lead to increased cloud albedo and thus increased solar reflectivity, phenomena of interest in solar radiation management. In addition to ship tracks being of interest to meteorologists and policy makers, their observed cloud perturbations provide benchmark evidence of ACI that remain poorly captured by climate models. To broadly analyze the effects of ship tracks, high-resolution satellite imagery data highlighting their presence are required. To support this, we provide a hand labelled dataset to serve as a benchmark for a variety of subsequent analyses. Established from a previous dataset that identified ship track presence using NASA’s MODIS Aqua satellite imager, our first-of-its-kind dataset is comprised of image masks: capturing full ship track regions, including their contours, emission points and dispersive patterns. In total, 300 images, or around 2,500 masked ship tracks, observed under varying conditions are provided, and may facilitate training of machine learning algorithms to automate extraction.

Atmospheric dynamics↗

Constraining the Aerosol Effects on Deep Convective Clouds by Considering the Coupling Between Clouds and the Planetary Boundary Layer

Several mechanisms have been proposed for the aerosol invigoration effect. Although their principles are well established, their actual magnitudes and roles in cloud development remain uncertain and debatable. This uncertainty partly stems from observational-based studies, in which it has been challenging to separate the co-variability between aerosols and meteorology. Addressing this problem requires large data samples. To this end, this study employs the Atmospheric Radiation Measurement data set expanding to 16 years (some up to 17 years, compared to 10 years in previous work) in the U.S. Southern Great Plains. It also conducts a more careful and rigorous analysis to isolate the influences of convective available potential energy (CAPE) and synoptic patterns to address a previously raised concern. We incorporated a new key process affecting aerosol-cloud interaction: cloud-surface coupling. The state/degree of the coupling relationship turns out to play an important role in the invigoration effect. Our analysis reinforces earlier findings of a robust positive relationship between cloud thickness and aerosol loading across CAPE percentiles—but only under cloud-surface coupled conditions. The increase in cloud thickness with aerosol loading is most pronounced in coupled clouds with high CAPE and bases below 1 km. Coupled clouds with bases below 1 km thicken between 1 and 4 km, depending on the CAPE percentile. Decoupled clouds show no such systematic changes. Synoptic patterns also lead to different strengths of the invigoration effect. Clean and polluted air masses are predominantly associated with northerly and southerly winds, respectively, with a stronger invigoration effect in cleaner air masses.

Geosciences↗

Characterization of the aerosol vertical distributions and their impacts on warm clouds based on multi-year ARM observations

Aerosol vertical distribution plays a crucial role in cloud development and thus precipitation since both aerosol indirect and semi-direct effects significantly depend on the relative position of aerosol layer in reference to cloud, but its precise influence on cloud remains unclear. In this study, we integrated multi-year Raman Lidar measurements of aerosol vertical profiles from the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) facility with available Value-Added Products of cloud features to characterize aerosol vertical distributions and their impacts on warm clouds over the continental and marine ARM atmospheric observatories, i.e., Southern Great Plains (SGP) and Eastern North Atlantic (ENA). A unimodal seasonal distribution of aerosol optical depths (AODs) with a peak in summer is found at upper boundary layer over SGP, while a bimodal distribution is observed at ENA for the AODs at lower levels with a major winter-spring maximum. The diurnal mean of upper-level AOD at SGP shows a maximum in the early evening. According to the relative positions of aerosol layers to clouds we further identify three primary types of aerosol vertical distribution, including Random, Decreasing, and Bottom. It is found that the impacts of aerosols on cloud may or may not vary with aerosol vertical distribution depending on environmental conditions, as reflected by the wide variations of the relations between AOD and cloud properties. For example, as AOD increases, the liquid water paths (LWPs) tend to be reduced at SGP but enhanced at ENA. The relations of cloud droplet effective radius with AOD largely depend on aerosol vertical distributions, particularly showing positive values in the Random type under low-LWP condition (<50gm -2 ). In conclusion, the distinct features of aerosol-cloud interactions in relation to aerosol vertical distribution are likely attributed to the continental-marine contrast in thermodynamic environments and aerosol conditions between SGP and ENA.

54 ENVIRONMENTAL SCIENCES↗

Overview of the Nephele Perturbed Parameter Ensemble for Aerosol‐Cloud Interactions in E3SMv3

Aerosol-cloud interactions (aci) are the leading source of uncertainty in inferring climate sensitivity from the historical record. Earth system models (ESMs) struggle to represent aci because the processes responsible for these phenomena occur at much finer time and space scales than can be resolved by any ESM. Observational constraints provide key benchmarks to test ESMs, but cannot be used alone to fully understand aci processes except in very specific cases where causality is controlled; some degree of modeling is required to infer aci and estimate radiative forcing. Here, we generate and characterize a perturbed parameter ensemble (PPE) in version 3 of the Energy Exascale ESM (E3SMv3). We perturb 25 parameters that govern aci processes over 250 members and integrate the model over present-day and preindustrial aerosol emissions. We find that the process representation in E3SMv3 is flexible and can generate global-mean effective radiative forcings due to aci (ERFaci) ranging from −3.0 to +0.9 W m −2 . The positive ERFaci values simulated by a portion of the PPE are implausible and result from parameter combinations that produce unrealistic top-of-atmosphere energy fluxes. While global-mean cloud droplet number concentration always increases in response to anthropogenic aerosol, cloud liquid water path can both increase and decrease, suggesting that precipitation suppression is not the only aerosol-cloud adjustment represented by E3SMv3. Analysis of which processes control liquid cloud adjustment in the PPE points toward stratiform precipitation processes and aerosol activation, which is consistent with many previous ESMs, as well as the new two-moment convective cloud microphysics in E3SMv3.

Nugent, Jacqueline M. [Univ. of Wyoming, Laramie, ↗

Review of particle deposition to and removal from clothing, skin, and hair after a radioactive airborne dispersal event

Explosive Radiological Dispersal Devices (RDD) – aka dirty bombs – are seen as a credible method to carry out a radiological terror attack. After exploding a radioactive source, the radionuclide-laden plume will be blown downwind of ground zero, with particles falling out and potentially depositing on people caught in and under the cloud. Some of these people may not show any sign of radiation sickness and therefore not realize they have been contaminated and may take the radioactive particulate with them on their daily activities, thus spreading the radioactive particulate outside the initially contaminated area. This paper reviews the scientific literature to better understand the rate at which particulate deposits on and is removed from the different “surfaces” of a person, i.e., hair, skin, and clothing. Prior research indicates that: 1) particle deposition is usually higher on skin than on hair and clothing; 2) particle deposition is greater for a person with higher skin moisture, 3) stronger wind increases the deposition flux onto a person, and 4) the fraction of particulate deposited on the hair, skin, and clothing respectively depends on the length of the hair, assuming all the hair surface is available for deposition. The studies taken into consideration show that the largest uncertainty in particulate deposition onto a person is due to clothing type because of the different possible weave arrangements and tightness which translate into differences in actual surface area and surface roughness. A factor of 2-to-20 variation in deposition rate was found. Removal of the particulate from the contaminated person may be due to wind, a person's movement, and/or contact transfer, i.e., by touching a different clean surface. Experiments show that the majority of the particulate is resuspended within 2–6 h mostly depending on the intensity of physical activity. The largest uncertainty in particulate removal from skin depends on the skin moisture, transfer rate of single-contact, and how many objects/people a person touches per hour. No data for hair were found for particle removal and resuspension. The studies considered did not utilize radionuclides directly; however, data on adhesion of radioactive vs. their non-radioactive counterpart have shown that the uncertainty due to the radioactivity of the particles is lower than that due to other factors. In conclusion, an idealized scenario involving a single building in the path of the cloud showed the impact of building-influenced flow on the cloud transport path and mixing, which affects the radiological dose the downwind population is exposed to and consequently the health effects.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Liquid Containing Clouds at the North Slope of Alaska Demonstrate Sensitivity to Local Industrial Aerosol Emissions

Abstract Cloud condensation nucleus control alter cloud solar albedo through cloud droplet size. Here, we leverage anthropogenic emissions at the North Slope of Alaska as a natural laboratory to study relationships between aerosols and Arctic liquid‐containing clouds. Averaging 14 years of MODIS observations, we found a reduction in temporally averaged cloud effective radius ( ) of up to 1.0 μm related to localized pollution. Pronounced regional gradients in cloud frequency of occurrence and liquid water path prohibit the detection of potential changes of these variables. Observed changes of alter radiative fluxes and increase cloud‐reflected shortwave radiation by up to 0.8 W m − 2 in the Prudhoe Bay area for the period covered by observations (April–September). Due to the frequent occurrence of liquid‐containing clouds, this implies that enhanced local emissions in Arctic regions can impact climate processes.

54 ENVIRONMENTAL SCIENCES↗

Enhancing fire emissions inventories for acute health effects studies: integrating high spatial and temporal resolution data

Daily fire progression information is crucial for public health studies that examine the relationship between population-level smoke exposures and subsequent health events. Issues with remote sensing used in fire emissions inventories (FEI) lead to the possibility of missed exposures that impact the results of acute health effects studies. This paper provides a method for improving an FEI dataset with readily available information to create a more robust dataset with daily fire progression. High temporal and spatial resolution burned area information from two FEI products are combined into a single dataset, and a linear regression model fills gaps in daily fire progression. The combined dataset provides up to 71% more PM 2.5 emissions, 69% more burned area, and 367% more fire days per year than using a single source of burned area information. The FEI combination method results in improved FEI information with no gaps in daily fire emissions estimates. The combined dataset provides a functional improvement to FEI data that can be achieved with currently available data.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Targeted Mobile Measurements to Isolate the Impacts of Aerosols and Meteorology on Deep Convection

One of the main goals of the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Tracking Aerosol Convection Interactions Experiment (TRACER) field campaign near Houston, TX was to improve understanding of meteorology and aerosol effects on deep convective storms. To help TRACER achieve its goals of disentangling aerosol-cloud interactions from meteorology, the Texas A&M University (TAMU) team deployed the new fully mobile Rapid Onsite Atmospheric Measurement Van (ROAM-V) carrying instruments to measure aerosol and atmospheric properties that was moved to multiple locations on a deployment day of isolated convection initiated by the sea breeze.

54 ENVIRONMENTAL SCIENCES↗

Comparison of aircraft measurements during GoAmazon2014/5 and ACRIDICON-CHUVA

The indirect effect of atmospheric aerosol particles on the Earth's radiation balance remains one of the most uncertain components affecting climate change throughout the industrial period. The large uncertainty is partly due to the incomplete understanding of aerosol–cloud interactions. One objective of the GoAmazon2014/5 and the ACRIDICON (Aerosol, Cloud, Precipitation, and Radiation Interactions and Dynamics of Convective Cloud Systems)-CHUVA (Cloud Processes of the Main Precipitation Systems in Brazil) projects was to understand the influence of emissions from the tropical megacity of Manaus (Brazil) on the surrounding atmospheric environment of the rainforest and to investigate its role in the life cycle of convective clouds. During one of the intensive observation periods (IOPs) in the dry season from 1 September to 10 October 2014, comprehensive measurements of trace gases and aerosol properties were carried out at several ground sites. In a coordinated way, the advanced suites of sophisticated in situ instruments were deployed aboard both the US Department of Energy Gulfstream-1 (G1) aircraft and the German High Altitude and Long-Range Research Aircraft (HALO) during three coordinated flights on 9 and 21 September and 1 October. Here, we report on the comparison of measurements collected by the two aircraft during these three flights. Such comparisons are challenging but essential for assessing the data quality from the individual platforms and quantifying their uncertainty sources. Similar instruments mounted on the G1 and HALO collected vertical profile measurements of aerosol particle number concentrations and size distribution, cloud condensation nuclei concentrations, ozone and carbon monoxide mixing ratios, cloud droplet size distributions, and downward solar irradiance. We find that the above measurements from the two aircraft agreed within the measurement uncertainties. The relative fraction of the aerosol chemical composition measured by instruments on HALO agreed with the corresponding G1 data, although the total mass loadings only have a good agreement at high altitudes. Furthermore, possible causes of the discrepancies between measurements on the G1 and HALO are examined in this paper. Based on these results, criteria for meaningful aircraft measurement comparisons are discussed.

47 OTHER INSTRUMENTATION↗

Ultraviolet H 2 luminescence in molecular clouds induced by cosmic rays

Context. Galactic cosmic rays (CRs) play a crucial role in ionisation, dissociation, and excitation processes within dense cloud regions where UV radiation is absorbed by dust grains and gas species. CRs regulate the abundance of ions and radicals, leading to the formation of more and more complex molecular species, and determine the charge distribution on dust grains. A quantitative analysis of these effects is essential for understanding the dynamical and chemical evolution of star-forming regions. Aims. The CR-induced photon flux has a significant impact on the evolution of the dense molecular medium in its gas and dust components. This study evaluates the flux of UV photons generated by CRs to calculate the photon-induced dissociation and ionisation rates of a vast number of atomic and molecular species, as well as the integrated UV photon flux. Methods. To achieve these goals, we took advantage of recent developments in the determination of the spectra of secondary electrons, in the calculation of state-resolved excitation cross sections of H 2 by electron impact, and of photodissociation and photoionisation cross sections. Results. We calculated the H 2 level population of each rovibrational level of the X, B, C, B′, D, B″, D′, and a states. We then computed the UV photon spectrum of H 2 in its line and continuum components between 72 and 700 nm, with unprecedented accuracy, as a function of the CR spectrum incident on a molecular cloud, the H 2 column density, the isomeric H 2 composition, and the dust properties. The resulting photodissociation and photoionisation rates are, on average, lower than previous determinations by a factor of about 2, with deviations of up to a factor of 5 for the photodissociation of species such as AlH, C 2 H 2 , C 2 H 3 , C 3 H 3 , LiH, N 2 , NaCl, NaH, O 2 + , S2, SiH, l-C 4 , and l-C 5 H. A special focus is given to the photoionisation rates of H 2 , HF, and N 2 , as well as to the photodissociation of H 2 , which we find to be orders of magnitude higher than previous estimates. We give parameterisations for both the photorates and the integrated UV photon flux as a function of the CR ionisation rate, which implicitly depends on the H 2 column density, as well as the dust properties.

79 ASTRONOMY AND ASTROPHYSICS↗

Ultraviolet H 2 luminescence in molecular clouds induced by cosmic rays

Context. Galactic cosmic rays (CRs) play a crucial role in ionisation, dissociation, and excitation processes within dense cloud regions where UV radiation is absorbed by dust grains and gas species. CRs regulate the abundance of ions and radicals, leading to the formation of more and more complex molecular species, and determine the charge distribution on dust grains. A quantitative analysis of these effects is essential for understanding the dynamical and chemical evolution of star-forming regions. Aims. The CR-induced photon flux has a significant impact on the evolution of the dense molecular medium in its gas and dust components. This study evaluates the flux of UV photons generated by CRs to calculate the photon-induced dissociation and ionisation rates of a vast number of atomic and molecular species, as well as the integrated UV photon flux. Methods. To achieve these goals, we took advantage of recent developments in the determination of the spectra of secondary electrons, in the calculation of state-resolved excitation cross sections of H 2 by electron impact, and of photodissociation and photoionisation cross sections. Results. We calculated the H 2 level population of each rovibrational level of the X, B, C, B', D, B", D', and a states. We then computed the UV photon spectrum of H 2 in its line and continuum components between 72 and 700 nm, with unprecedented accuracy, as a function of the CR spectrum incident on a molecular cloud, the H 2 column density, the isomeric H 2 composition, and the dust properties. The resulting photodissociation and photoionisation rates are, on average, lower than previous determinations by a factor of about 2, with deviations of up to a factor of 5 for the photodissociation of species such as AlH, C 2 H 2 , C 2 H 3 , C 3 H 3 , LiH, N 2 , NaCl, NaH, O$^+_2$, S 2 , SiH, l-C 4 , and l-C 5 H. A special focus is given to the photoionisation rates of H 2 , HF, and N 2 , as well as to the photodissociation of H 2 , which we find to be orders of magnitude higher than previous estimates. We give parameterisations for both the photorates and the integrated UV photon flux as a function of the CR ionisation rate, which implicitly depends on the H 2 column density, as well as the dust properties.

79 ASTRONOMY AND ASTROPHYSICS↗