Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cloud ice water content”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Icing Frequencies Experienced During Climb and Descent by Fighter-Interceptor Aircraft

Data and analyses are presented on the relative frequencies of occurrence and severity of icing cloud layers encountered by jet aircraft in the climb and descent phases of flights to high altitudes. Fighter-interceptor aircraft operated by the Air Defense Command (USAF) at bases in the Duluth and Seattle areas collected the data with icing meters installed for a l-year period. The project was part of an extensive program conducted by the NACA to collect Icing cloud data for evaluating the icing problem relevant to routine operations. The average frequency of occurrence of icing was found to be about 5 percent of the number of climbs and descents during 1 year of operations The icing encounters were predominantly in the low and middle cloud layers, decreasing above 15,000 feet to practically none above 25,000 feet. The greatest thickness of ice that would accumulate on any aircraft component (as indicated by the accretion on a small object) was measured with the icing meters. The ice thicknesses on a small sensing probe averaged less than 1/32 inch and did not exceed 1/2 inch. Such accumulations are relatively small when compared with those that can form during horizontal flight in icing clouds. The light accretions resulted from relatively steep angles of flight through generally thin cloud layers. Because of the limited statistical reliability of the results, an analysis was made using previous statistics on icing clouds below an altitude of 20,000 feet to determine the general icing severity probabilities. The calculations were made using adiabatic lifting as a basis to establish the liquid-water content. Probabilities of over-all ice accretions on a small object as a function of airspeed and rate of climb were computed from the derived water contents. These results were then combined with the probability of occurrence of icing in order to give the icing severity that can be expected for routine aircraft operations.

Perkins, Porter J.↗

The Winter 2010 and 2011 FRONT/NIRSS In-Flight Icing Hazard Detection Project

The NASA Icing Remote Sensing System (NIRSS) deploys a vertically-pointing K-band radar, a lidar ceiliometer, and a profiling microwave radiometer to obtain measurements for diagnosing local inflight icing conditions. RAL is working with NASA GRC to develop algorithms and data ingest and display software for the system. NASA has an ongoing activity to develop remote sensing technologies for the detection and measurement of icing conditions aloft. As part of that effort NASA teamed with NCAR to develop software that fuses data from multiple instruments into a single detected icing condition product. The multiple instrument approach, which is the current emphasis of this activity, utilizes a K-band vertical staring radar, a microwave radiometer that detects twelve frequencies between 22 and 59 GHz, and a lidar ceilometer. The radar data determine cloud boundaries, the radiometer determines the sub-freezing temperature heights and total liquid water content, and the ceilometer refines the lower cloud boundary. Data is post-processed in C++ program with a Java-based web display of resultant supercooled LWC profile and aircraft hazard identification. In 2010, a multi-channel scanning radiometer, designed and built by Radiometrics, Inc. under a SBIR grant,,was added to the system to assess its utility in improving icing diagnoses.

Serke, David↗

Ice water path estimation and characterization using passive microwave radiometry

Model computations of top-of-atmospheric microwave brightness temperatures T(B) from layers of precipitation-sized ice of variable bulk density and ice water content (IWC) are presented. It is shown that the 85-GHz T(B) depends essentially on the ice optical thickness. The results demonstrate the potential usefulness of scattering-based channels for characterizing the ice phase and suggest a top-down methodology for retrieval of cloud vertical structure and precipitation estimation from multifrequency passive microwave measurements. Attention is also given to radiative transfer model results based on the multiparameter radar data initialization from the Cooperative Huntsville Meteorological Experiment (COHMEX) in northern Alabama. It is shown that brightness temperature warming effects due to the inclusion of a cloud liquid water profile are especially significant at 85 GHz during later stages of cloud evolution.

Vivekanandan, J.↗

Tropopause Laminar Cirrus and Its Role in the Lower Stratosphere Total Water Budget

Laminar cirrus are thin, extensive, isolated layers of ice clouds frequently observed in the tropical tropopause layer. Widespread laminar cirrus significantly affects tropical tropopause layer total water and thermal budget. In this study, we extract laminar cirrus from the Cloud‐Aerosol Lidar with Orthogonal Polarization Level 1 attenuated total backscatter images for January 2009, in order to characterize statistical properties of laminar cirrus cloud length, base, thickness, optical depth, and layer partial ice water path. These characteristics are used to develop an algorithm identifying laminar cirrus automatically from the Cloud‐Aerosol Lidar with Orthogonal Polarization Level 2 layer product for 2008–2017. The nearly 10‐year records reveal that tropopause laminar cirrus occurrence (30–40% of total cirrus) is strongly anticorrelated with the tropopause temperatures in that colder tropopause in frequent (super)saturation during boreal winter favors in situ formation of clouds. Interannually, anomalously warmer troposphere temperature (ΔT), easterly shear of the quasi‐biennial oscillation, and stronger upwelling branch of the Brewer‐Dobson circulation enhance laminar cirrus formation via cooling of the tropopause. The tropopause laminar cirrus carries ~0.05 mg/m(exp 3) (~0.5 ppmv) of ice water content during boreal winter and <0.01 mg/m(exp 3) during summer, which is anticorrelated with the seasonal variations of water vapor (H2O) observed by the Microwave Lime Sounder, indicating a temperature‐regulated partition between vapor and ice. Interannually, in cirrus‐rich region 1 ppmv decrease in H2O corresponds to 0.2–0.3 ppmv increase in ice water content. Frequently situated in (super)saturated air, tropopause laminar cirrus are likely to survive multiple lifecycles of the sublimation‐deposition processes, and may contribute up to 10% to the total water budget in the lower stratosphere. Satellites constantly observe thin, isolated, extensive layer of cirrus around the tropopause. The so‐called “laminar” cirrus occurrence and their ice amount are strongly regulated by temperature, such that colder temperatures favor more frequent (super)saturation, which results in more frequent laminar cirrus with more ice amount and therefore less water vapor. In this study we analyze laminar cirrus and water vapor from the Cloud‐Aerosol Lidar with Orthogonal Polarization and Microwave Lime Sounder observations, and hypothesize that laminar cirrus could act as an important transient water storage and contribute to the total water budget in the lower stratosphere.

Tao Wang↗

A satellite-borne radar wind sensor (RAWS)

Modeling global atmospheric circulations and forecasting the weather would improve if worldwide information on winds aloft were available. Accurate prediction of weather is important to agriculture, shipping, air traffic, and many other fields. Global system models of climate are of great importance. Current global atmospheric models use pressure measurements and thermodynamic properties to calculate the effects of wind for use in Numerical Weather Prediction (NWP) models. Inputs to the NWP models are temperature, pressure and wind velocities at different heights. Clearly direct wind measurements could significantly improve the NWP model performance. The RAdar Wind Sounder (RAWS) program at the University of Kansas is a study of the feasibility and the trade-offs in the design of a space-based radar system to measure wind vectors. This can be done by measuring the Doppler shift of cloud and rain returns from three or more points and calculating the components of the wind vector. The RAWS study to date uses the candidate system selected after preliminary study of frequencies and sensitivities. Two frequencies chosen, 10 and 35 GHz, allow higher sensitivity for clouds and more penetration for rain. The past year was devoted to modeling the signal-to-noise ratio (SNR) achievable for the two frequencies. The determination of SNR versus cloud penetration depth used a cloud backscattering and attenuation model in the appropriate radar equation. Calculations assumed reasonable losses in reception and transmission, in addition to the atmospheric attenuation. We discovered that ice clouds provide a higher SNR than previously calculated, but some water clouds give lower SNRs than we calculated before. One of the primary issues in the SNR calculation was the choice of the drop size distribution. Although Xin used several distributions (e.g., log normal, Khrigian and Mazin), this year we used the Deirmendjian cloud model. SNR versus cloud penetration plots were generated to validate the candidate system. Rain, which appears in the cloud models at the lower altitudes, provides ample SNR, as do the higher clouds composed of ice particles. However, in some cloud situations we found the sensitivity for the clouds was marginal or inadequate. At 35 GHz, two of the cloud models characterized by 1 to 2 g/cu m of water content at altitudes extending from 150 to 1500 meters, produced a sufficient SNR. Other models, however, with water contents ranging from 0.5 to 4 g/cu m and altitudes up to 4000 meters, exhibit SNR of -3 to -23 dB, largely because of attenuation in the upper cloud layers. These results coupled with the lower SNR at 10 GHz, led to an investigation of alternate frequencies. The rain present beneath these clouds provides adequate SNR at 10 GHz, and in most cases, at GHz.

Moore, Richard K.↗

Microwave radiometry for monitoring the diverse cloudiness regimes on Earth: A review

Recent work concerning the use of microwave radiometers in space to provide views of the water content of clouds is reported. Recently, theoretical algorithms were refined and the sampling by microwave radiometers for polar orbiting satellite became more commensurate in resolution and coverage with the scale of the meteorological phenomena. Parameters available from the Special Sensor Microwave/Imager (SSM/I) include total integrated water vapor (kg/sq m), integrated cloud liquid water (kg/sq m), rain rate (mm/hr), and an index for the presence and concentration of large ice particles; this so called scattering index can also be converted to a rain rate, although conversion is still rather uncertain. The hydrologic aspects of climatically important cloud systems on the Earth such as subtropical stratus decks, tropical convection, and midlatitude and polar cyclone can thus be monitored with the SSM/I parameters. The diagnostic as well as prognostic potential of these satellite derived water content properties of cloud systems are also discussed.

Katsaros, Kristina B.↗

Observed and Simulated Variability of Droplet Spectral Dispersion in Convective Clouds Over the Amazon

Abstract In this study, the variability of the spectral dispersion of droplet size distributions (DSDs) in convective clouds is investigated. Analyses are based on aircraft measurements of growing cumuli near the Amazon basin, and on numerical simulations of an idealized ice‐free cumulus. In cleaner clouds, the relative dispersion , defined as the ratio of the standard deviation to the mean value of the droplet diameter, is negatively correlated with the ratio of the cloud water content ( ) to the adiabatic liquid water content ( ), while no strong correlation between and is seen in polluted clouds. Bin microphysics numerical simulations suggest that these contrasting behaviors are associated with the effect of collision‐coalescence in cleaner clouds, and secondary droplet activation in polluted clouds, in addition to the turbulent mixing of parcels that experienced different paths within the cloud. Collision‐coalescence simultaneously broadens the DSDs and decreases , explaining the inverse relationship between and in cleaner clouds. Secondary droplet activation broadens the DSDs but has little direct impact on . The combination of a rather modest DSD broadening due to weak collision‐coalescence with enhanced droplet activation in both diluted and highly undiluted cloud regions may contribute to maintain a relatively uniform within polluted clouds. These findings can be useful for parameterizing the shape parameter ( ) of gamma DSDs in bulk microphysics cloud‐resolving models. It is shown that emulating the observed relationship improves the estimation of the collision‐coalescence rate in bulk microphysics simulations compared to the bin simulations.

54 ENVIRONMENTAL SCIENCES↗

Implementation of Combined Feather and Surface-Normal Ice Growth Models in LEWICE/X

Experimental observations have shown that discrete rime ice growths called feathers, which grow in approximately the direction of water droplet impingement, play an important role in the growth of ice on accreting surfaces for some thermodynamic conditions. An improved physical model of ice accretion has been implemented in the LEWICE 2D panel-based ice accretion code maintained by the NASA Lewis Research Center. The LEWICE/X model of ice accretion explicitly simulates regions of feather growth within the framework of the LEWICE model. Water droplets impinging on an accreting surface are withheld from the normal LEWICE mass/energy balance and handled in a separate routine; ice growth resulting from these droplets is performed with enhanced convective heat transfer approximately along droplet impingement directions. An independent underlying ice shape is grown along surface normals using the unmodified LEWICE method. The resulting dual-surface ice shape models roughness-induced feather growth observed in icing wind tunnel tests. Experiments indicate that the exact direction of feather growth is dependent on external conditions. Data is presented to support a linear variation of growth direction with temperature and cloud water content. Test runs of LEWICE/X indicate that the sizes of surface regions containing feathers are influenced by initial roughness element height. This suggests that a previous argument that feather region size is determined by boundary layer transition may be incorrect. Simulation results for two typical test cases give improved shape agreement over unmodified LEWICE.

Matthew T Velazquez↗

The DC-8 Submillimeter-Wave Cloud Ice Radiometer

An airborne radiometer is being developed to demonstrate the capability of radiometry at submillimeter-wavelengths to characterize cirrus clouds. At these wavelengths, cirrus clouds scatter upwelling radiation from water vapor in the lower troposphere. Radiometric measurements made at multiple widely spaced frequencies permit flux variations caused by changes in scattering due to crystal size to be distinguished from changes in cloud ice content. Measurements at dual polarizations can also be used to constrain the mean crystal shape. An airborne radiometer measuring the upwelling submillimeter-wave flux should then able to retrieve both bulk and microphysical cloud properties. The radiometer is being designed to make measurements at four frequencies (183 GHz, 325 GHz, 448 GHz, and 643 GHz) with dual-polarization capability at 643 GHz. The instrument is being developed for flight on NASA's DC-8 and will scan cross-track through an aircraft window. Measurements with this radiometer in combination with independent ground-based and airborne measurements will validate the submillimeter-wave radiometer retrieval techniques. The goal of this effort is to develop a technique to enable spaceborne characterization of cirrus, which will meet a key climate measurement need. The development of an airborne radiometer to validate cirrus retrieval techniques is a critical step toward development of spaced-based radiometers to investigate and monitor cirrus on a global scale. The radiometer development is a cooperative effort of the University of Colorado, Colorado State University, Swales Aerospace, and Jet Propulsion Laboratory and is funded by the NASA Instrument Incubator Program.

Walter, Steven J.↗

Laboratory and field observations related to ice particle and aircraft charging in convective storms

Graupel particle charging in simulated cloud conditions which show the need for the presence of ice crystals and cloud water simultaneously except under conditions where secondary ice crystal production occurs when charging initially occurs in the absence of ice crystals was examined. The magnitude of the charging increases with size of ice crystals, and impact velocity; it is also sensitive to impurities. The magnitude of the charge is also sensitive to temperature and the sign changes between -10 and -20 C, depending on cloud liquid water content. Aircraft studies were carried out in Montana convective clouds to test the validity of the extrapolation of the laboratory data to the atmosphere from the viewpoint of generation of charge, electric field, and aircraft charging during cloud penetration.

Christian, H.↗

Analysis of the Meteorology Associated with the 1997 NASA Glenn Twin Otter Icing Events

This part of the document contains an analysis of the meteorology associated with the premier icing encounters from the January-March 1997 NASA Twin Otter dataset. The purpose of this analysis is to provide a meteorological context for the aircraft data collected during these flights. For each case, the following data elements are presented: (1) A detailed discussion of the Twin Otter encounter, including locations, liquid water contents, temperatures and microphysical makeup of the clouds and precipitation aloft, (2) Upper-air charts, providing hand-analyzed locations of lows, troughs, ridges, saturated/unsaturated air, temperatures, warm/cold advection, and jet streams, (3) Balloon-borne soundings, providing vertical profiles of temperature, moisture and winds, (4) Infrared satellite data, providing cloud locations and cloud top temperature, (5) 3-hourly surface charts, providing hand-analyzed locations of lows, highs, fronts, precipitation (including type) and cloud cover, (6) Hourly plots of icing pilot reports, providing the icing intensity, icing type, icing altitudes and aircraft type, (7) Hourly, regional radar mosaics, providing fine resolution of the locations of precipitation (including intensity and type), pilot reports of icing (including intensity and type), surface observations of precipitation type and Twin Otter tracks for a one hour window centered on the time of the radar data, and (8) Plots of data from individual NEXRAD radars at times and elevation angles that have been matched to Twin Otter flight locations. Outages occurred in nearly every dataset at some point. All relevant data that was available is presented here. All times are in UTC and all heights are in feet above mean sea level (MSL).

Bernstein, Ben C.↗

On the Effects of Cloud Water Content on Passive Microwave Snowfall Retrievals

The Bayesian passive microwave retrievals of snowfall often rely on mathematical matching of the observed vectors of brightness temperature with an a priori database of precipitation profiles and their corresponding brightness temperatures. Mathematical proximity does not necessarily lead to consistent retrievals due to limited information content of passive microwave observations. This paper defines imposter (genuine) vectors of brightness temperature as those that are mathematically close but physically inconsistent (consistent) and characterizes them through the Silhouette Coefficient (SC) analysis. The Neyman–Pearson (NP) hypothesis testing is used to separate the imposter and genuine brightness temperatures based on their associated values of cloud ice (IWP) and liquid water path (LWP), given by coincidences of CloudSat Profiling Radar (CPR) and the Global Precipitation Measurement (GPM) Microwave Imager (GMI). The study determines thresholds for IWP and LWP that allow optimal identification of imposter brightness temperatures of non-snowing and snowing clouds, which can mislead the passive microwave retrieval algorithms to falsely detect or miss the snowfall events. It is demonstrated that emission signal of supercooled liquid water in snowing clouds can lead to improved passive microwave retrieval of snowfall and conditioning the retrievals to the cloud IWP and LWP can result in marginal correction of the snowfall detection probability; however, reduce the probability of false alarm by 6%–8% over sea ice and open oceans.

Snowfall↗

Measurements of the aerosol and ice crystal populations in tropical stratospheric cumulonimbus anvils

A pair of particle size spectrometers was flown aboard the NASA U-2 operating from the Canal Zone to make measurements of the aerosol and ice crystal budgets in cirrus produced by thunderstorms in the tropics. Measurements indicate that fairly large crystals up to 1 mm in size are injected into the stratosphere during cumulonimbus activity. Ice water contents range from a few thousandths to a few hundredths of a gram per cubic meter. Because the ambient temperature is typically around -80 C the mass of the larger crystals largely returns to lower altitudes before evaporating. Aerosol size distributions indicate a curious narrow growth mode between 0.15 and 0.2 micron in cirrus anvils which is absent outside these clouds. The presence of this narrow mode is attributed to near water saturation produced at cloud top. Nucleation of new ice crystals as well as aerosol is hypothesized

Knollenberg, R. G.↗

Experimental comparison of icing cloud instruments

Icing cloud instruments were tested in the spray cloud Icing Research Tunnel (IRT) in order to determine their relative accuracy and their limitations over a broad range of conditions. It was found that the average of the readings from each of the liquid water content (LWC) instruments tested agreed closely with each other and with the IRT calibration; but all have a data scatter (+ or - one standard deviation) of about + or - 20 percent. The effect of this + or - 20 percent uncertainty is probably acceptable in aero-penalty and deicer experiments. Existing laser spectrometers proved to be too inaccurate for LWC measurements. The error due to water runoff was the same for all ice accretion LWC instruments. Any given laser spectrometer proved to be highly repeatable in its indications of volume median drop size (DVM), LWC and drop size distribution. However, there was a significant disagreement between different spectrometers of the same model, even after careful standard calibration and data analysis. The scatter about the mean of the DVM data from five Axial Scattering Spectrometer Probes was + or - 20 percent (+ or - one standard deviation) and the average was 20 percent higher than the old IRT calibration. The + or - 20 percent uncertainty in DVM can cause an unacceptable variation in the drag coefficient of an airfoil with ice; however, the variation in a deicer performance test may be acceptable.

Olsen, W.↗

An examination of the effects of explicit cloud water in the UCLA GCM

The effect of explicit cloud water on the climate simulation by the University of California of Los Angeles GCM is investigated by adding the mixing ratios of cloud ice and cloud liquid water to the prognostic variables of the model. The detrained cloud ice and cloud liquid water are obtained by the microphysical calculation in the Arakawa-Schubert (1974) cumulus scheme. The results are compared with the observations concerned with cloudiness, planetary albedo, OLR, and the dependence of cloud water content on temperature.

Ose, Tomoaki↗

Analysis of the Meteorology Associated with the 1998 NASA Glenn Twin Otter Icing Flights

This document contains a basic analysis of the meteorology associated with the NASA Glenn Twin Otter icing encounters between December 1997 and March 1998. The purpose of this analysis is to provide a meteorological context for the aircraft data collected during these flights. For each case, the following data elements are presented: (1) A brief overview of the Twin Otter encounter, including locations, liquid water contents, temperatures and microphysical makeup of the clouds and precipitation aloft, (2) Upper-air charts, providing hand-analyzed locations of lows, troughs, ridges, saturated/unsaturated air, temperatures, warm/cold advection, and jet streams, (3) Balloon-borne soundings, providing vertical profiles of temperature, moisture and winds, (4) Infrared and visible satellite data, providing cloud locations and cloud top temperature, (5) 3-hourly surface charts, providing hand-analyzed locations of lows, highs, fronts, precipitation (including type) and cloud cover, (6) Hourly, regional radar mosaics, providing fine resolution of the locations of precipitation (including intensity and type), pilot reports of icing (including intensity and type), surface observations of precipitation type and Twin Otter tracks for a one hour window centered on the time of the radar data, and (7) Hourly plots of icing pilot reports, providing the icing intensity, icing type, icing altitudes and aircraft type. Outages occurred in nearly every dataset at some point. All relevant data that was available is presented here. All times are in UTC and all heights are in feet above mean sea level (MSL).

Bernstein, Ben C.↗

Phase Doppler Interferometry for Efficient Cloud Drop Size Distribution, Number Density, and LWC Measurements

Threats to aviation safety as a result of super-cooled large drops (SLD) has been addressed by the FAA rules change (14 CFR Part 25) with the additional icing certification requirement. SLD clouds often consist of bi-modal drop size spectra leading to significant problems in simulating and characterizing these conditions in situ and in icing wind tunnels. Legacy instrumentation for measuring drop size distributions and liquid water content are challenged under these conditions. The large size range measurement problem is addressed with the development of the Phase Doppler Interferometer, Flight Probe Dual-Range (PDI FPDR). The method is described in this report along with the measurement capabilities including the dynamic measurement range and overall working size range. The PDI instrument bases drop size measurements on the light wavelength as the measurement length scale. The light wavelength is a much more robust scale, especially as compared to the light scattering intensity. Additionally, methods for accurately characterizing the sample volume in situ based on measured drop velocity and transit time are reviewed, given the importance of this parameter for merging results and measuring LWC. Droplet coincidence in the sample volume can be problematic so this condition is treated with an innovative signal parsing approach. Measurement examples acquired in the NASA IRT are provided. Measurements of LWC showed good agreement with the Artium Particle Imaging (PI) instrument but diverged from the tunnel calibration results for larger MVD values.

42 ENGINEERING↗

Forecast model applications of retrieved three dimensional liquid water fields

Forecasts are made for tropical storm Emily using heating rates derived from the SSM/I physical retrievals described in chapters 2 and 3. Average values of the latent heating rates from the convective and stratiform cloud simulations, used in the physical retrieval, are obtained for individual 1.1 km thick vertical layers. Then, the layer-mean latent heating rates are regressed against the slant path-integrated liquid and ice precipitation water contents to determine the best fit two parameter regression coefficients for each layer. The regression formulae and retrieved precipitation water contents are utilized to infer the vertical distribution of heating rates for forecast model applications. In the forecast model, diabatic temperature contributions are calculated and used in a diabatic initialization, or in a diabatic initialization combined with a diabatic forcing procedure. Our forecasts show that the time needed to spin-up precipitation processes in tropical storm Emily is greatly accelerated through the application of the data.

Raymond, William H.↗