Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “clip”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

A simplified correlation technique for position location using earth satellites.

To derive range to a moving vehicle for surveillance and navigation purposes, the phase delays in sets of sinusoidal tones may be measured using synchronous satellites for signal relay. When the number of users is large, problems of rapid acquisition and measurement occur in multiple-access systems. This paper describes the selection and processing of an orthogonal tone set which has several useful features. The paper also presents a simulation of a simplified digital technique for the noise-free case, as well as for a composite signal buried in wideband noise. The digital simulation is also modified to include the proposed 'hard limiting' or clipping technique.

Martin, S. C.↗
NASA NTRS1972

Evidence for a metabolic limitation of survival in hypothermic hamsters.

The underlying factors limiting survival in the hypothermic state are studied. Hamsters of both sexes, clipped and unclipped, were inducted into profound hypothermia by the helium cold method until they reached a temperature between 7 and 10 C. It appears that the primary cause of death is failure of respiration due to the depletion of carbohydrate energy supplies and may explain why survival time in hypothermia is shorter than the normal hibernation time of the hamster.

Prewitt, R. L.↗
NASA NTRS1972

Subcritical crack growth of selected aerospace pressure vessel materials

This experimental program was undertaken to determine the effects of combined cyclic/sustained loads, stress level, and crack shape on the fatigue crack growth rate behavior of cracks subjected to plane strain conditions. Material/environment combinations tested included: 2219-T87 aluminum plate in gaseous helium, room air, and 3.5% NaCl solution at room temperature, liquid nitrogen, and liquid hydrogen; 5Al-2.5 Sn (ELI) titanium plate in liquid nitrogen and liquid hydrogen and 6AL-4V (ELI) STA titanium plate in gaseous helium and methanol at room temperature. Most testing was accomplished using surface flawed specimens instrumented with a clip gage to continuously monitor crack opening displacements at the specimen surface. Tapered double cantilever beam specimens were also tested. Static fracture and ten hour sustained load tests were conducted to determine fracture toughness and apparent threshold stress intensity values. Cyclic tests were performed using sinusoidal loading profiles at 333 MHz (20 cpm) and trapezoidal loading profiles at both 8.3 MHz (0.5 cpm) and 3.3 MHz (0.2 cpm). Data were evaluated using modified linear elastic fracture mechanics parameters.

Hall, L. R.↗
NASA NTRS1973

Apollo 15 mission. Temporary loss of command module television picture

An investigation was made into the temporary loss of command module color television picture by the ground station converter at Mission Control Center. Results show the picture loss was caused by a false synchronization pulse that resulted from the inability of the black level clipping circuit to respond adequately to the video signal when bright sunlight suddenly entered the camera's field of view.

Source record↗
NASA NTRS1973

Wind-tunnel roll-damping measurements of a winged space shuttle configuration in launch attitude

Ground-wind load studies were conducted on three model configurations to assess the importance of aeroelastic instabilities of erected space shuttle vehicles. Roll damping was measured on a fuselage-alone model, which had a D cross section, and a fuselage and tail surfaces in combination with either a clipped-delta wing or a low-sweep tapered wing as the primary lifting surface. The largest negative roll-damping coefficients were measured with the fuselage-alone configuration and were a function of wind azimuth. At the wind azimuths at which the wing-fuselage configuration was unstable, the negative roll-damping coefficients were a function of reduced frequency.

Hess, R. W.↗
NASA NTRS1973

Wind machines

The basic elements of the air/water momentum exchange are described by the environment, the potential, the air and water subsystems, the total system, and the rule. Many of these topics have direct analogues in aerogenerator design. Aspects of optimal sail design and of waveless hulls are briefly outlined. A wind driven vehicle capable of moving directly downwind faster than the wind, is reported. The lecture is illustrated with slides and movie clips showing surfing catamarans, land and water versions of the Bauer vehicle, hang gliding, land sailing, and wind surfing.

Lissaman, P. B. S.↗
NASA NTRS1974

Effects of surface roughness on the aerodynamic characteristics of the modified 089 B shuttle orbiter at Mach 6 (LA15)

A one hundredth scale model of the modified 089B shuttle orbiter was tested in the Langley 20-Inch Mach 6 tunnel. Force and moment, surface pressure and oilflow data were obtained on one model, and phase-change coating data were obtained on another. The pressure tests were conducted first; the tubes were clipped near the base of the model and then the force and moment and oil flow tests conducted. Angles of attack for the tests were from 20 deg to 35 deg and are commensurate with the range of flight values from entry down to Mach 5. The design flight Reynolds number at Mach 6, based on model length, was 15 million, which could not be obtained in the tunnel; therefore, the tests were conducted at the highest and lowest values for this model in the tunnel, 9.4 million and 4.0 million, respectively, to indicate Reynolds number effects. Two control deflection combinations, representative of the bank and pitch control limits of the design flight trajectory, were used.

Ashby, G. C., Jr.↗
NASA NTRS1974

Subsonic and supersonic longitudinal stability and control characteristics of an aft tail fighter configuration with cambered and uncambered wings and uncambered fuselage

An investigation has been made in the Mach number range from 0.20 to 2.16 to determine the longitudinal aerodynamic characteristics of a fighter airplane concept. The configuration concept employs a single fixed geometry inlet, a 50 deg leading-edge-angle clipped-arrow wing, a single large vertical tail, and low horizontal tails. The wing camber surface was optimized in drag due to lift and was designed to be self-trimming at Mach 1.40 and at a lift coefficient of 0.20. An uncambered or flat wing of the same planform and thickness ratio was also tested. However, for the present investigation, the fuselage was not cambered. Further tests should be made on a cambered fuselage version, which attempts to preserve the optimum wing loading on that part of the theoretical wing enclosed by the fuselage.

Dollyhigh, S. M.↗
NASA NTRS1974

A magnetic field measurement technique using a miniature transducer

The development, fabrication, and application of a magnetometer are described. The magnetometer has a miniature transducer and is capable of automatic scanning. The magnetometer described here is capable of detecting static magnetic fields as low as 1.6 A/m and its transducer has an active area 0.64 mm by 0.76 mm. Thin and rugged, the transducer uses wire, 0.05 mm in diameter, which is plated with a magnetic film, enabling measurement of transverse magnetic fields as close as 0.08 mm from a surface. The magnetometer, which is simple to operate and has a fast response, uses an inexpensive clip-on milliammeter (commonly found in most laboratories) for driving and processing the electrical signals and readout. A specially designed transducer holding mechanism replaces the XY recorder ink pen; this mechanism provides the basis for an automatic scanning technique. The instrument has been applied to the measurements of magnetic fields arising from remanent magnetization in experimental plated-wire memory planes and regions of magnetic activity in geological rock specimens.

Fales, C. L., Jr.↗
NASA NTRS1975

A multidisciplinary study of earth resources imagery of Australia, Antarctica and Papua, New Guinea

The author has identified the following significant results. A thirteen category recognition map was prepared, showing forest, water, grassland, and exposed rock types. Preliminary assessment of classification accuracies showed that water, forest, meadow, and Niobrara shale were the most accurately mapped classes. Unsatisfactory results, were obtained in an attempt to discrimate sparse forest cover over different substrates. As base elevation varied from 7,000 to 13,000 ft, with an atmospheric visibility of 48 km, no changes in water and forest recognition were observed. Granodiorite recognition accuracy decreased monotonically as base elevation increased, even though the training set location was at 10,000 ft elevation. For snow varying in base elevation from 9400 to 8420 ft, recognition decreases from 99% at the 9400 ft training set elevation to 88% at 8420 ft. Calculations of expected radiance at the ERTS sensor from snow reflectance measured at the site and from Turner model calculations of irradiance, transmission and path radiance, reveal that snow signals should not be clipped, assuming that calculations and ERTS calibration constants were correct.

Fisher, N. H.↗
NASA NTRS1975

Wind tunnel investigation of a Centaur standard shroud compartment vent from Mach number of 0.70 to 1.96

An experimental investigation was conducted in the Lewis Research Center 8- by 6-foot supersonic wind tunnel to determine the vent discharge coefficient for the Centaur standard shroud/liquid hydrogen tank compartment vent. The test was conducted from Mach 0.70 to 1.96 with the vent mounted in a flat plate. Full scale simulated flight hardware, such as the vent, corrugations, aft field joint ring and ice bag clip was used. Air was discharged from a plenum chamber, located on the tunnel sidewall behind the plate, through five 6.35 cm diameter vent orifices into the free stream. Boundary layer thickeners, analytically predicted displacement thickness for the vehicle nominal flight trajectory could be simulated over the Mach number range. The highest vent discharge coefficient for any given Mach number and vent pressure ratio generally occurred at the maximum displacement thickness.

Johns, A. L.↗
NASA NTRS1974

Influences of physical training on the heart of dogs

To investigate the effects of physical training on cardiac dimensions and function, eight dogs were exercised for 12 weeks by treadmill running 1 hour/day, 5 days/week. Five dogs were confined in cages as controls for an 8-week period. Heart rates were monitored by telemetry during rest and exercise. Maximum QRS spatial magnitudes were calculated from records of McFee lead electrocardiograms. Left ventricular end-diastolic dimensions were determined radiographically by the bead and clip technique. Training produced statistically significant decreases in heart rate at rest and at a standard work load of 6.1 mph on a level treadmill and statistically significant increases in work load at a standard heart rate of 194 beats/min. Improvements were rapid during the first 4 weeks of training but gradual during the remaining 8 weeks. Training caused small but statistically significant increases in left ventricular end-diastolic wall thickness, estimated left ventricular mass, and maximum QRS spatial magnitude.

Wyatt, H. L.↗
NASA NTRS1977

Capacitively-coupled data receiver clipper stage

Circuit technique compensates for dc offset and asymmetry in dc clipping levels, negates unbalance in input waveform that causes voltage offset at end of data word, blocks any dc component that is generated by asymmetrical operation of clipper, and improves data threshold detection.

Saunders, F. W.↗
NASA NTRS1977

Fireman's lamp

Rugged lamp used by miners is adapted for firefighters by utilization of smaller, rechargeable 3-hour-life gel-cell battery. Lighter, maintenance free unit can be clipped to outer clothing for convenience. Small monitor circuit indicates need to recharge battery.

Britz, W. J.↗
NASA NTRS1977

Subsonic and supersonic longitudinal stability and control characteristics of an aft-tail fighter configuration with cambered and uncambered wings and cambered fuselage

The longitudinal aerodynamic characteristics of a fighter airplane concept has been determined through an investigation over a Mach number range from 0.50 to 2.16. The configuration incorporates a cambered fuselage with a single external compression horizontal ramp inlet, a clipped arrow wing, twin horizontal tails, and a single vertical tail. The wing camber surface was optimized in drag due to lift and was designed to be self trimming at Mach 1.40 and at a lift coefficient of 0.20. The fuselage was cambered to preserve the design wing loadings on the part of the theoretical wing enclosed by the fuselage. An uncambered of flat wing of the same planform and thickness ratio distribution was also tested.

Dollyhigh, S. M.↗
NASA NTRS1976

Static inverter with synchronous output waveform synthesized by time-optimal-response feedback

Time-optimal-response 'bang-bang' or 'bang-hang' technique, using four feedback control loops, synthesizes static-inverter sinusoidal output waveform by self-oscillatory but yet synchronous pulse-frequency-modulation (SPFM). A single modular power stage per phase of ac output entails the minimum of circuit complexity while providing by feedback synthesis individual phase voltage regulation, phase position control and inherent compensation simultaneously for line and load disturbances. Clipped sinewave performance is described under off-limit load or input voltage conditions. Also, approaches to high power levels, 3-phase arraying and parallel modular connection are given.

Kernick, A.↗
NASA NTRS1977

Resolution of grass canopy biomass classes

Analysis of variance methods has been applied to in situ grassland spectral reflectance data in order to determine the classes or levels of total wet biomass that can be resolved spectrally by a single narrow band measurement. Ground-truth clipping of blue grama grass plots was performed immediately following spectral reflectance measurements at 91 wavelength intervals which were 0.005 microns apart over the spectral range from 0.350 to 0.800 microns. It was found that the photographic infrared region of 0.750 to 0.800 microns could be used to distinguish three classes or levels of total wet biomass. Four or five classes, particularly at higher biomass levels, could not be distinguished by this technique.

Tucker, C. J.↗
NASA NTRS1979

Quick locking/unlocking retainer

Spring clip retainer may prove more convenient than clamps or wingnut and stud combination when holding two small parts together in test fixtures and other applications where parts must be frequently moved or changed.

Okamoto, G.↗