Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “calculator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Inelastic deformation of diamond single crystals shock compressed to multimegabar stresses: Wave profile calculations

As the archetypal strong solid, the response of diamond shock compressed to multimegabar stresses is important for fundamental science and for numerical simulations of wave profiles for applications in high energy density physics experiments. Previous experiments and analysis have shown that the commonly used hydrodynamic assumption is invalid for diamond shock compressed to stresses below melt and an elastic–inelastic description is needed. Here, we present a phenomenological material model for calculating wave profiles in shock compressed diamond single crystals that incorporates this description. Also, to support the modeling effort, we carried out wave profile measurements on shock compressed diamond single crystals at the Sandia Z facility to augment previous measurements. Wave profiles for [100] and [111] diamond calculated using the material model provide a good match to the elastic–inelastic response (observed two-wave structure) measured at ∼325 and ∼360 GPa. Furthermore, the calculated peak stresses for single (overdriven) waves provide a good match to the measured Hugoniot states for stresses reaching ∼700 GPa, which is near melting conditions. The present results show that the diamond single crystal response at multimegabar shock stresses is characteristic of a brittle solid—pressure-dependent strength and strength loss due to inelastic deformation.

Deformation↗
DOE OSTI2020

First-principles calculation of excited states of diatomic molecules: a benchmark for the Gutzwiller conjugate gradient minimisation method

We recently proposed the Gutzwiller conjugate gradient minimisation (GCGM) method for efficient and accurate calculation of the ground state total energy of molecular and bulk systems. The GCGM method is developed under the framework of Gutzwiller wave function but goes beyond the commonly adopted Gutzwiller approximation to improve the accuracy and flexibility in treating the correlation effects. In this conference proceeding, we benchmark the GCGM method with the calculation of excited state potential energy curves of three diatomic molecules, namely H 2 , N 2 , and O 2 . Our calculations demonstrate the flexibility and reasonable accuracy of the method.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Serpent and MCNP Calculations of the Energy Deposition in the Transformational Challenge Reactor

This paper focuses on the calculation of the energy deposition in the Transformational Challenge Reactor by two major Monte Carlo codes: Serpent and MCNP. The first software computation relies on Kinetic Energy Released per unit Mass (KERMA) factors while the second one relies on Q-values. The results from these two independent computation methodologies are in very good agreement; however, Serpent runs much faster than MCNP (for the same computational model) and allows for a detailed energy deposition distribution from a 1-mm-side square mesh with a relative statistical error between 0.5% and 1%. This detailed energy deposition is suitable for multiphysics analyses aimed at design optimizations. In order to calculate the energy deposition, Serpent needs enhanced ACE files (distributed by the software developers). Unlike other Monte Carlo software that uses inputs based on Python or Java languages, the Serpent input syntax is very similar to that of MCNP; a Python script can convert a MCNP input to a Serpent input in seconds. For simulations not requiring the calculation of the energy deposition, Serpent can also read nuclear data from MCNP ACE files, which eventually improves the comparison of the results of the two codes.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

A Standardized Analysis Process Using Digital Image Correlation to Calculate In Situ Cladding Strain from Modified Burst Tests for Fuel Performance Code Validation

Historical data collection on nuclear fuel cladding materials has focused on generating a statistically significant amount of data to assess the material and its failure behavior. Furthermore, data generated to support material model and failure criteria development were previously posttest evaluations, so a large number of tests was required to gain new understanding. A way to expedite this process is to develop techniques capable of generating large, high-fidelity data sets from a single test with lower uncertainty or quantified uncertainty. One such example of this approach is Oak Ridge National Laboratory’s use of modified burst tests (MBTs) to analyze the mechanical behavior and failure conditions of cladding during a simulated reactivity-initiated accident (RIA). Each test incorporates digital image correlation (DIC) analysis techniques that are used to assess the accumulated strain in situ, as well as eventual cladding failure. This work has been fruitful in defining strain-to-failure conditions for materials like silicon carbide (SiC) fiber–reinforced/SiC matrix composite tubes (SiC/SiC), iron-chromium-aluminum (FeCrAl) alloy tubes, and chromium-coated Zircaloy-4 tubes. However, there are numerous DIC software available, including open-source and proprietary software. The different DIC software use various algorithms to process images and calculate displacement values. Using these different software and algorithms can lead to varying results, and perhaps larger-than-expected uncertainties. In the present study, previously published MBT data encompassing a variety of test conditions were reanalyzed with two different DIC software to assess the variance in the calculated strain results. The data consisted of SiC/SiC, FeCrAl, and chromium-coated Zircaloy-4 tubes. Plots of the calculated strains during the transient revealed good agreement between the two DIC software. The average root-mean-square errors between the two software was 0.20% strain, which is slightly larger than a previously reported error value for these tests. In conclusion, this variance in results is low enough that this analysis method can be used for code validation.

Reactivity-initiated accident↗
DOE OSTI2026

Calculations of enrichment cascade performance using enrichment probabilities – a new method

A new method for calculating the performance of uranium enrichment cascades is presented. The method assigns a unique “enrichment probability” for each isotope to move up or down from the basic enrichment unit, allowing independent material balance calculations for each isotope. The formulation is much simpler than previous methods, which rely on isotopic ratios, and this method can be used when previous methods fail. This method gives the same results as published cases for 235 U enrichment and also gives good agreement with published data on minor isotopes. Some comparisons with measured data and other calculations are given. One case shows that the maximum 235 U enrichment that can be obtained by enrichment of reprocessed uranium (0.02% 234 U initial) is 82%. Another example shows a large difference in the minor isotopic content of material enriched in batches compared to continuous enrichment.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

A Dirac R-matrix calculation for the electron-impact excitation of W +

Abstract Aims : tungsten has been chosen for use as a plasma facing component in the divertor for the ITER experiment, and is currently being used on existing tokamaks such as JET. W + plays an integral role in assessing the impurity influx from plasma facing component of tokamaks and subsequent redeposition. Together with previously calculated a neutral tungsten electron-impact dataset this study allows us to determine neighbouring spectral lines in the same wavelength window of the spectrometer, and detect if there is strong blending of overlapping lines between these two ion stages as well as providing ionisation per photon ratios for both species. The new data is to be used for tungsten erosion/redeposition diagnostics. Methods : a significantly modified version of the GRASP0 atomic structure code in conjunction with DARC (Dirac Atomic R -matrix Code) are used to calculate the Einstein A coefficients and collisional rates used to generate a synthetic W II spectrum. The W II spectrum is compared against tungsten spectral emission experiments. Results : this study is used to model the spectrum of W ii , providing the predictive capability of identifying spectral lines from recent experiments. These results provide an integral part of impurity influx and redeposition determination, as the ionisation rates may be used to calculate S/XB ratios.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

A superconfiguration calculation of opacity with consistent bound and continuum electron treatments using green’s functions

One of the challenges in calculating the opacity of dense plasmas is the difficulty in consistently modeling electrons bound to nuclei and those that exist within the continuum of free states in electronic structure models. We address this issue by adapting the green's function approach, originally developed for use in average atom calculations, to the determination of superconfiguration (SC) electronic structure. The spectra created using these SCs indicate that a consistent treatment of continuum electronic structure is important for phenomena involving electrons near ionization thresholds, such as the pressure ionization of bound states and the opacity due to transitions near bound-free edges. Though important for dense plasmas, the detailed incorporation of continuum electrons into structure calculations does not have significant impact on the recent discrepancies between the predicted and measured opacity of hot, dense iron (Bailey et al 2015 Nature517 56). Here we find that the inclusion of plasma effects through an ion-sphere model along with our treatment of continuum electronic states gives a description of pressure ionization in hot, dense aluminum that is in better agreement with experiment than methods that rely on perturbative descriptions of the plasma environment (Hoarty et al 2013 Phys. Rev. Lett.110 265003).

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

R-matrix calculations for opacities: I. Methodology and computations

Abstract An extended version of the R -matrix methodology is presented for calculation of radiative parameters for improved plasma opacities. Contrast and comparisons with existing methods primarily relying on the distorted wave approximation are discussed to verify accuracy and resolve outstanding issues, particularly with reference to the opacity project (OP). Among the improvements incorporated are: (i) large-scale Breit–Pauli R -matrix calculations for complex atomic systems including fine structure, (ii) convergent close coupling wave function expansions for the ( e + ion) system to compute oscillator strengths and photoionization cross sections, (iii) open and closed shell iron ions of interest in astrophysics and experiments, (iv) a treatment for plasma broadening of autoionizing resonances as function of energy-temperature-density dependent cross sections, (v) a ‘top-up’ procedure to compare convergence with R -matrix calculations for highly excited levels, and (vi) spectroscopic identification of resonances and bound ( e + ion) levels. The present R -matrix monochromatic opacity spectra are fundamentally different from OP and lead to enhanced Rosseland and Planck mean opacities. An outline of the work reported in other papers in this series and those in progress is presented. Based on the present re-examination of the OP work, opacities of heavy elements might require revisions in high temperature-density plasma sources.

Pradhan, A. K. (ORCID:0000000187753643)↗
DOE OSTI2022

First-principles calculation of gate-tunable ferromagnetism in magic-angle twisted bilayer graphene under pressure

Magic-angle twisted bilayer graphene (MATBG) is notable as a highly tunable platform for investigating strongly correlated phenomena such as unconventional superconductivity and quantum spin liquids, due to easy control of doping level through gating and sensitive dependence of the magic angle on hydrostatic pressure. Experimental observations of correlated insulating states, unconventional superconductivity and ferromagnetism in MATBG indicate that this system exhibits rich exotic phases. In this work, using density functional theory calculations in conjunction with the effective screening medium method, we find the MATBG under pressure at a twisting angle of 2.88 °and simulate how its electronic states evolve when doping level and electric field perpendicular to plane are tuned by gating. Our calculations show that, at doping levels between two electrons and four holes per moiré unit cell, a ferromagnetic (FM) solution with spin density localized at AA stacking sites is lower in energy than the nonmagnetic solution. The magnetic moment of this FM state decreases with both electron and hole doping and vanishes at four electrons/holes doped per moiré unit cell. Hybridization between the flat bands at the Fermi level and the surrounding dispersive bands can take place at finite doping. On increasing the out-of-plane electric field at zero doping, a transition from the FM state to the nonmagnetic one is seen. An investigation of impurity effects shows that both absorption of O 2 molecules and occurrence of Stone–Wales impurities suppress the FM state, and the mechanisms are understood from our calculations. We also analyze the interlayer bonding character due to flat bands via Wannier functions. Finally, we report trivial band topology of the flat bands in the FM state at a certain doping level.

Physics↗
DOE OSTI2022

Fast calculation of the tokamak vertical instability

There has been recent interest in fast calculations of the tokamak axisymmetric vertical instability for real time feedback control purposes. It is shown that the maximum eigenvalue for the basic rigid version of this stability problem can be obtained by finding the positive root to a simple scalar function. This function can be generalized to include plasma mass and has complexity linear in the number of conductive elements. The formulation is based on standard matrix decompositions of the fixed-geometry part of the eigenproblem. The calculation bottleneck is the summary of mutual inductances from the reconstructed equilibrium current density. The with-mass spectrum can be made fully real-valued by the addition of a critical amount of damping with negligible effect on the vertical growth rate. Furthermore, the calculation has been implemented in the plasma control system at the DIII-D tokamak and used in experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

A hybrid 3D/2D field response calculation for liquid argon detectors with PCB based anode plane

Liquid Argon Time Projection Chamber (LArTPC) technology is commonly utilized in neutrino detector designs. It enables detailed reconstruction of neutrino events with high spatial precision and low energy threshold. Its field response (FR) model describes the time-dependent electric currents induced in the anode-plane electrodes when ionization electrons drift nearby. An accurate and precise FR is a crucial input to LArTPC detector simulations and charge reconstruction. Established LArTPC designs have been based on parallel wire planes. It allows accurate and computationally economic two-dimensional (2D) FR models utilizing the translational symmetry along the direction of the wires. Recently, novel LArTPC designs utilize electrodes formed on printed circuit board (PCB) in the shape of strips with through holes. The translational symmetry is no longer a good approximation near the electrodes and a new FR calculation that employs regions with three dimensions (3D) has been developed. Extending the 2D models to 3D would be computationally expensive. Fortuitously, the nature of strips with through holes allows for a computationally economic approach based on the finite-difference method (FDM). In this paper, we present a new software package pochoir that calculates LArTPC field response for these new strip-based anode designs. This package combines 3D calculations in the volume near the electrodes with 2D far-field solutions to achieve fast and precise field response computation. We apply the resulting FR to simulate and reconstruct samples of cosmic-ray muons and 39 Ar decays from a Vertical Drift (VD) detector prototype operated at CERN. We find the difference between real and simulated data within 5%. Current state-of-the-art LArTPC software requires a 2D FR which we provide by averaging over one dimension and estimate that variations lost in this average are smaller than 7%.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Ab initio calculations of monopole sum rules: From finite nuclei to infinite nuclear matter

We compute moments of the isoscalar monopole response of 𝑁 = 𝑍 closed-shell nuclei based on chiral nucleon-nucleon plus three-nucleon interactions. We employ the random-phase approximation (RPA) and two ab initio many-body approaches, the in-medium similarity renormalization group (IMSRG) and coupled-cluster theory (CC). In the IMSRG framework, the moments are obtained as ground-state expectation values, whereas in the CC approach, they are evaluated through excited-state calculations. We find good agreement between the IMSRG and CC results across all nuclei studied. RPA provides a reasonable approximation to the correlated methods if the interaction is soft. From the calculated moments, we extract average energies of the monopole response, compute finite-nucleus incompressibilities, and estimate the incompressibility of symmetric nuclear matter by a fit to a leptodermous expansion. Our extrapolated values are lower than those obtained in nuclear-matter calculations with the same interactions, but the values are consistent with phenomenological ranges.

Bonaiti, Francesca [Michigan State Univ., East Lan↗
DOE OSTI2026

Lattice calculation of short-range contributions to neutrinoless double-beta decay 𝜋 − → 𝜋 + ⁢𝑒⁢𝑒 at physical pion mass

Neutrinoless double-beta (0⁢𝜈⁢𝛽⁢𝛽) decays provide an excellent probe for determining whether neutrinos are Dirac or Majorana fermions. The short-range matrix elements associated with the 𝜋 − → 𝜋 + ⁢𝑒⁢𝑒 process contribute at leading order in the 0⁢𝜈⁢𝛽⁢𝛽 decay channel 𝑛⁢𝑛 → 𝑝⁢𝑝⁢𝑒⁢𝑒 through pion exchange between nucleons. However, current lattice calculations show notable discrepancies in predicting these short-range contributions. To address this issue, we perform a lattice QCD calculation of the 𝜋 − → 𝜋 + ⁢𝑒⁢𝑒 matrix elements using domain wall fermion ensembles at the physical pion mass generated by the RBC/UKQCD Collaboration. To mitigate contamination from around-the-world effects, we develop a new method to reconstruct and subtract them directly from lattice data. We then perform nonperturbative renormalization in the regularization-independent symmetric momentum-subtraction scheme (RI/SMOM), using the (𝛾 𝜇 , 𝛾 𝜇 ) and ($\not{𝑞}$, $\not{𝑞}$) projectors. Compared with previous studies, this work reduces the uncertainties in the matrix elements and provides an independent cross-check that helps to reconcile the discrepancies among previous lattice calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Convergent close-coupling calculations of electron scattering on LiH

Cross sections for electron scattering on the ground state of LiH are calculated using the molecular convergent close-coupling method. The fixed-nuclei approximation is utilized, and calculations are performed at the mean internuclear separation of 3.06 𝑎 0 for projectile energies ranging from 0.1 to 500 eV. Here, a model-potential approach is utilized to treat the LiH molecule as a two-electron system, and good agreement is found with the literature for various properties of the structure model. Cross sections are presented for elastic scattering, excitation to several electronic states, and ionization. Comparison is made with existing results, and qualitative agreement is found with small close-coupling calculations at low projectile energies. Good agreement is found with first-order results at high projectile energies.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Hybrid functional calculations of electronic structure and carrier densities in rare-earth monopnictides

The structural parameters and electronic structure of rare-earth pnictides are calculated using density functional theory (DFT) with the Heyd, Scuseria, and Ernzerhof (HSE06) screened hybrid functional. Specifically, we focus on RE-V compounds, with RE=La, Gd, Er, and Lu, and V=As, Sb, and Bi, and analyze the effects of spin-orbit coupling and treating the RE4$\textit{f}$ electrons as valence electrons in the projector augmented wave approach. The results of HSE06 calculations are compared with DFT within the generalized gradient approximation (DFT-GGA) and other previous calculations. We find that all these RE-V compounds are semimetals with electron pockets at the $\textit{X}$ point and hole pockets at Γ. Whereas in DFT-GGA the carrier density is significantly overestimated, the computed carrier densities using HSE06 is in good agreement with the available experimental data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Temperature-dependent phonon lifetimes and thermal conductivity of silicon by inelastic neutron scattering and ab initio calculations

In this paper, inelastic neutron scattering on a single crystal of silicon was performed at temperatures from 100 to 1500 K. These experimental data were reduced to obtain phonon spectral intensity at all wave vectors $\overset{→}{Q}$ and frequencies ω in the first Brillouin zone. Thermal broadenings of the phonon peaks were obtained by fitting and by calculating with an iterative ab initio method that uses thermal atom displacements on an ensemble of superlattices. Agreement between the calculated and experimental broadenings was good, with possible discrepancies at the highest temperatures. Distributions of phonon widths versus phonon energy had similar shapes for computation and experiment. These distributions grew with temperature but maintained similar shapes. Parameters from the ab initio calculations were used to obtain the thermal conductivity from the Boltzmann transport equation, which was in good agreement with experimental data. Despite the high group velocities of longitudinal acoustic phonons, their shorter lifetimes reduced their contribution to the thermal conductivity, which was dominated by transverse acoustic modes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Calculations of anisotropic magnetic properties using spin-orbit energy variations

We analyze several methods of obtaining the accurate relativistic total energy (TE) variations using traditional perturbation theories (PTs) and proposed coupling constant integration (CCI) methods. For this purpose, we perform benchmark calculations within the density functional theory taking the spin-orbit coupling (SOC) and its derivative as a perturbation. The TE change due to SOC addition obtained from both PTs and CCI is shown to reach the accuracy of fully self-consistent TE calculations. Similar accuracy is also obtained even for the magnetocrystalline anisotropy energy (MAE). The real advantage of the proposed methods is to use PTs and CCI methods in those electronic structure methods where accurate total energies currently cannot be obtained with required accuracy. Correspondingly, we demonstrate the applicability of suggested methods for calculations of MAE in different magnetic materials using a dynamic mean-field method. All suggested PTs and CCI methods also provide convenient site, orbital, and spin decompositions of the TE variation, creating a powerful way to analyze microscopic physics in strongly correlated materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

First-principles calculations of metal surfaces. I. Slab-consistent bulk reference for convergent surface properties

The first-principles computation of the surfaces of metals is typically accomplished through slab calculations of finite thickness. The extraction of a convergent surface formation energy from slab calculations is dependent upon defining an appropriate bulk reference energy. I describe a method for an independently computed, slab-consistent bulk reference that leads to convergent surface formation energies from slab calculations that also provides realistic uncertainties for the magnitude of unavoidable nonlinear divergence in the surface formation energy with slab thickness. In conclusion, the accuracy is demonstrated on relaxed, unreconstructed low-index aluminum surfaces with slabs with up to 35 layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗