Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “calcination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Enhanced photocatalytic performance of mesoporous TiO{sub 2} coated SBA-15 nanocomposites fabricated through a novel approach: supercritical deposition aided by liquid-crystal template

Highlights: • Highly uniform mesoporous TiO{sub 2} nanopartices were coated SBA-15. • MT showed smaller crystallite size, higher hydroxyl content and surface area. • MT/SBA-15 show enhanced photocatalytic activity and high reused activity. • The optimum MT loading rate and calcination temperature were obtained to be 15% and 400 °C, respectively. • Photocatalytic behaviors are discussed in terms of the Langmuir–Hinshelwood model. - Abstract: Mesoporous TiO2 coated SBA-15 (MT@S) nanocomposites were fabricated through supercritical CO{sub 2} deposition aided by liquid-crystal template. The as-prepared samples were characterized by transmission electron microscopy, X-ray photoelectron spectroscopy, diffuse reflectance spectroscopy and so on. The results reveal that MT uniformly deposited onto silica with titania incorporated in SBA-15 channels, showed smaller crystallite size, higher hydroxyl content and surface area than nonporous TiO{sub 2} coated SBA-15 (NT@S) obtained by a similar route without template. With TiO{sub 2} loading ratio of 15 wt% and calcination temperature of 400 °C, 15%MT@S-400 showed the enhanced degradation efficiency for azo dyes (methylene blue, methyl orange, and rhodamine B) and phenol in comparsion with 15%NT@S-400, due to those improved textural and physicochemical properties. Meanwhile, the reused MT@S also showed high photoactivity. Additionally, the effects of MT content and calcination temperature have been examined as operational parameters. Photocatalytic reactions followed pseudo-first-order kinetics and are discussed in terms of the Langmuir–Hinshelwood model.

36 MATERIALS SCIENCE↗

Structural, magnetic and optical properties of ZnO nanostructures converted from ZnS nanoparticles

Graphical abstract: The phase conversion of ZnS to highly crystalline hexagonal ZnO was done by heat treatment. - Highlights: • Phase change of cubic ZnS to hexagonal ZnO via heat treatment. • Band gap was found to decrease with increasing calcinations temperature. • ZnO samples have higher magnetic moment than ZnS. • Blocking Temperature of the samples is well above room temperature. • Maximum negative%MR with saturation value ∼38% was found for sample calcined at 600° C. - Abstract: The present work concentrates on the synthesis of cubic ZnS and hexagonal ZnO semiconducting nanoparticle from same precursor via co-precipitation method. The phase conversion of ZnS to highly crystalline hexagonal ZnO was done by heat treatment. From the analysis of influence of calcination temperature on the structural, optical and vibrational properties of the samples, an optimum temperature was found for the total conversion of ZnS nanoparticles to ZnO. Role of quantum confinement due to finite size is evident from the blue shift of the fundamental absorption in UV–vis spectra only in the ZnS nanoparticles. The semiconducting nature of the prepared samples is confirmed from the UV–vis, PL study and transport study. From the magnetic and transport studies, pure ZnO phase was found to be more prone to magnetic field.

36 MATERIALS SCIENCE↗

An in situ annealing route to [Bi6O6(OH)2](NO3)4·2H2O/g-C3N4 heterojunction and its visible-light-driven photocatalytic performance

Highlights: • The heterojunction (BBN-g-C{sub 3}N{sub 4}) was synthesized by in situ calcination route. • The baked Bi(NO{sub 3}){sub 3}·5H{sub 2}O as raw material is crucial to obtain highly crystalline BBN-g-C{sub 3}N{sub 4}. • BBN-g-C{sub 3}N{sub 4} exhibited better visible-light-driven photocatalytic activity than Bi{sub 2}O{sub 3}-g-C{sub 3}N{sub 4}. • BBN-g-C{sub 3}N{sub 4} prepared by calcining route possessed better photocatalytic activity than by mechanical mixing method. - Abstract: Known as incomplete hydrolysis products of Bi(NO{sub 3}){sub 3}·5H{sub 2}O, basic bismuth nitrates (BBN), were commonly obtained via a solution route. Herein, BBN-CN ([Bi{sub 6}O{sub 6}(OH){sub 2}](NO{sub 3}){sub 4}·2H{sub 2}O/g-C{sub 3}N{sub 4}) and Bi{sub 2}O{sub 3}-g-C{sub 3}N{sub 4} heterojunctions were prepared in situ by mixing g-C{sub 3}N{sub 4} with baked Bi(NO{sub 3}){sub 3}·5H{sub 2}O and subsequent calcining at 250 °C and 550 °C, respectively. The baked Bi(NO{sub 3}){sub 3}·5H{sub 2}O as a bismuth source was crucial to the formation of highly crystalline BBN, and otherwise, the product was poor-crystalline and low photoactive. The as-prepared BBN-CN exhibited better photocatalytic activity for rhodamine B (RhB) degradation under visible light irradiation than BBN, g-C{sub 3}N{sub 4}, and Bi{sub 2}O{sub 3}-g-C{sub 3}N{sub 4}, although Bi{sub 2}O{sub 3} is more visible-light-active. These could be attributed to higher surface areas and more negative conduction band potentials of BBN, which benefits for capturing the photogenerated electrons to form active O{sub 2}{sup −} radicals. Furthermore, the presence of g-C{sub 3}N{sub 4} plays a crucial role in enlarging visible light response.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of synthesis conditions and mesoporous structures on the gold nanoparticles supported on mesoporous silica hosts

Loading gold on mesoporous materials via different methods has been actively attempted in the literature, but the knowledge about the influences of synthesis details and different mesoporous structures on the size and thermal stability of gold nanoparticles supported on mesoporous hosts is still limited. In this study, Au/HMS, Au/MCM-41, Au/MCM-48, Au/SBA-15, and Au/SBA-16 samples were prepared by modifying a variety of mesoporous silicas by amine ligands followed by loading HAuCl4 and calcination. The influences of different amine ligands ((3-aminopropyl)triethoxysilane versus N-[3-(trimethoxysilyl)propyl]ethylenediamine), solvents (water versus ethanol), calcination temperatures (200 or 550 C), and mesoporous structures on the size of supported gold nanoparticles were systematically investigated employing nitrogen adsorption-desorption measurement, X-ray diffraction (XRD), diffuse reflectance UV-vis spectroscopy, and transmission electron microscopy (TEM). Interestingly, while big and irregular gold particles situate on MCM-48 with bicontinuous three-dimensional pore structure and relatively small pore size (2.4 nm) upon calcination at 550 C, homogeneous and small gold nanoparticles maintain inside SBA-15 with one-dimensional pore structure and relatively big pore size (6.8 nm). Apparently, the pore structure and pore size of mesoporous silica hosts play a key role in determining the size and thermal stability of the supported gold nanoparticles. Our results may provide some useful clues for the rational design of supported metal catalysts by choosing suitable mesoporous hosts.

36 MATERIALS SCIENCE↗

Iron-oxide Aerogel and Xerogel Catalyst Formulations: Characterization by 57Fe Mössbauer and XAFS Spectroscopies

Iron in various iron-oxide aerogel and xerogel catalyst formulations ({ge}85% Fe{sub 2}O{sub 3}; {le}10% K, Co, Cu, or Pd) developed for possible use in Fischer-Tropsch synthesis (FTS) or the water-gas-shift (WGS) reaction has been examined by {sup 57}Fe Moessbauer spectroscopy. The seventeen samples consisted of both as-prepared and calcined aerogels and xerogels and their products after use as catalysts for FTS or the WGS reaction. Complementary XAFS spectra were obtained on the occurrence of the secondary elements in some of the same materials. A broad, slightly asymmetric, two-peak Moessbauer spectrum was obtained from the different as-prepared and calcined catalyst formulations in the majority of cases. Such spectra could only be satisfactorily fit with three quadrupole doublet components, but no systematic trends in the isomer shift and quadrupole splitting parameters and area ratios of the individual components could be discerned that reflected variations in the composition or preparation of the aerogel or xerogel materials. However, significant reductions were noted in the Moessbauer effective thickness (recoilless absorption effect per unit mass of iron) parameter, {chi}{sub eff}/g, determined at room temperature, for aerogels and xerogels compared to bulk iron oxides, reflecting the openness and lack of rigidity of the aerogel and xerogel structures. Moessbauer measurements for two aerogels over the range from 15 to 292 K confirmed the greatly diminished nature of this parameter at room temperature. Major increases in the effective thickness parameter were observed when the open structure of the aerogel or xerogel collapsed during calcination resulting in the formation of iron oxides (hematite, spinel ferrite). Similar structural changes were indicated by increases in this parameter after use of iron-oxide aerogels as catalysts for FTS or the WGS reaction, during which the iron-oxide aerogel was converted to a mixture of nonstoichiometric magnetite and the Haegg carbide, {chi}-Fe{sub 5}C{sub 2}, or nonstoichiometric magnetite, respectively.

01 COAL, LIGNITE, AND PEAT↗

Experiment and modeling of CO{sub 2} capture from flue gases at high temperature in a fluidized bed reactor with Ca-based sorbents

The cyclic CO{sub 2} capture and CaCO{sub 3} regeneration characteristics in a small fluidized bed reactor were experimentally investigated with limestone and dolomite sorbents. Kinetic rate constants for carbonation and calcination were determined using thermogravimetric analysis (TGA) data. Mathematical models developed to model the Ca-based sorbent multiple cycles of CO{sub 2} capture and calcination in the bubbling fluidized bed reactor agreed with the experimental data. The experimental and simulated results showed that the CO{sub 2} in flue gases could be absorbed efficiently by limestone and dolomite. The time for high-efficiency CO{sub 2} capture decreased with an increasing number of cycles because of the loss of sorbent activity, and the final CO{sub 2} capture efficiency remained nearly constant as the sorbent reached its final residual capture capacity. In a continuous carbonation and calcination system, corresponding to the sorbent activity loss, the carbonation kinetic rates of sorbent undergoing various cycles are different, and the carbonation kinetic rates of sorbent circulating N times in the carbonation/calcination cycles are also different because of the different residence time of sorbent in the carbonator. Therefore, the average carbonation rate was given based on the mass balance and exit age distribution for sorbent in the carbonator. The CO{sub 2} capture characteristics in a continuous carbonation/calcination system were predicted, taking into consideration the mass balance, sorbent circulation rate, sorbent activity loss, and average carbonation kinetic rate, to give useful information for the reactor design and operation of multiple carbonation/calcination reaction cycles. 27 refs., 15 figs., 1 tab.

01 COAL, LIGNITE, AND PEAT↗

A systematic investigation into the extraction of aluminum from coal spoil through kaolinite

This research has applied kaolin and active carbon (AC) to the investigation of the recovery of aluminium from coal spoil (CS). The kaolin, AC-containing kaolin mixture, and CS have been calcined at 500, 600, 700, 800, and 900{degree}C for 15, 30, 60, and 120 min. The transformation of kaolinite and aluminium extraction that occurred in each calcined sample have been characterized using XRD, TG, IR, and hydrochloric acid leaching methods. The dehydroxylation of kaolinite and the decomposition of metakaolin were influenced by thermal treatment temperature and time. The metakaolin had kept a portion of OH- in its structure until it was calcined at a temperature of 800{degree}C. Under 60 min treatment, new SiO{sub 2} phase was able to be formed at 500{degree}C, kaolinite was totally converted to metakaolin at 600{degree}C, and the SiO{sub 2} rejoined the reaction at 800{degree}C. The decompositions of CS were similar to those of kaolin mixture containing 20 wt % AC (MKC). The combustion of combustible matter accelerated the decomposition of kaolinite in the CS and MKC. Higher AC content led to lower aluminum extraction. The treatment at 600{degree}C was optimal for both CS and MKC. 28 refs., 7 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Thermal Behavior Study of the MoVTeNb Oxide Catalyst for Selective Oxidation Process

Several parameters involved in preparing the multi metal oxide (MMO) catalysts (Mo{sub 1}V{sub 0.3}Te{sub 0.23}Nb{sub 0.12}O{sub x}) for selective oxidation of propane to acrylic acid (AA) were investigated. These included the proper pre-calcined and calcinations atmosphere effect on the performance of the catalysts. It was found that each metal element plays a critical role to the performance of an effective catalyst and also the calcinations under a non-flow inert atmosphere. The characterization results from XRD, SEM, TG and DSC show the important differences depending on the activation procedures of the MoVTeNb oxide catalyst. The XRD analysis is used to identify the phase inventory of the MoVTeNb oxide catalysts. The structure of orthorhombic M1, M2, TeMo{sub 5}O{sub 16}, V{sub 0.95}Mo{sub 0.97}O{sub 5} and Mo{sub 5}O{sub 14} phase was investigated. The orthorhombic M1 phase is the most active and selective phase and is responsible for the major of the efficiently of the best catalyst for selective oxidation process. TGA and DTG allow the identification of the number and types, of reactions involving evaporation of small molecules from removal of ligands and water to condensation or drying processes. From all these analyses it was proven that the activation procedures would affect the performance of the MoVTeNb oxide catalyst.

36 MATERIALS SCIENCE↗

Preparation of LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} for Lithium Batteries Via Solid-State Redox Method using Nitrate and Acetate Based Reactants

LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} is a potential cathode material for 5 V batteries. This material was prepared by the solid-state redox method using nitrate and acetate based reactants. The precursor material was obtained when the mixture reactants was heated at 500 deg. C for 10 hours and calcined at different temperatures in the range between 650 and 950 deg. C for 12 hours. The structures of the synthesized materials were verified with X- ray diffraction (XRD) measurement and Scanning Electron Microscope (SEM). The charge-discharge technique was determined using Solartron 1470. As calcination temperature increases, the well-ordered crystal growth oriented to [1 1 1] direction shows a clear octahedral morphology, which is the characteristic of the typical cubic spinel. The Li/LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} prepared from acetate based reactants calcined at 750 deg. C for 12 h delivered the discharge capacity of 140 mAh/g.

36 MATERIALS SCIENCE↗

Nanostructure investigation of magnetic nanomaterial Ni{sub 0.5}Zn{sub 0.3}Cu{sub 0.2}Fe{sub 2}O{sub 4} synthesized by sol-gel method

Magnetic nanomaterial Ni{sub 0.5}Zn{sub 0.3}Cu{sub 0.2}Fe{sub 2}O{sub 4} was successfully prepared by using sol-gel method. Heat treatment on material is always giving defect on properties of material. This paper investigates the effect of heat treatment on nanostructure of magnetic nanomaterial Ni{sub 0.5}Zn{sub 0.3}Cu{sub 0.2}Fe{sub 2}O{sub 4}. According to thermo gravimetric analysis (TGA) that after 600°C there is no more weight loss detected and it was decided as minimum calcination temperature. Intensity, crystallite size, structure, lattice parameter and d-spacing of the material were investigated by using X-ray diffraction (XRD). High resolution transmission electron microscope (HRTEM) was used to examine nanostructure, nanosize, shape and distribution particle of magnetic material Ni{sub 0.5}Zn{sub 0.3}Cu{sub 0.2}Fe{sub 2}O{sub 4} and variable pressure field emission scanning electron microscope (VP-FESEM) was used to investigate the surface morphology and topography of the material. The XRD result shows single-phase cubic spinel structure with average crystallite size in the range of 25.6-95.9 nm, the value of the intensity of the material was increased with increasing temperature, and followed by lattice parameter was increased with increasing calcination temperature, value of d-spacing was relatively decreased with accompanied increasing temperature. From HRTEM result the distribution of particles was tend to be agglomerates with particle size of 7.8-17.68 nm. VP-FESEM result shows that grain size of the material increases with increasing calcination temperature and the surface morphology shows that the material is in hexagonal shape and it was also proved by mapping result which showing the presence each of constituents inside the compound.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of heat treatment on the physical properties of bimetallic doped catalyst, Cu-Ni/TiO{sub 2}

Post heat treatment is critical for the doped semiconductor oxide in order to improve its photocatalytic performance. Thus work had been carried out to understand the effect of different calcination temperature (400, 450 and 500°C) on the physical properties of nanosized Cu-Ni/TiO{sub 2}Cu-Ni doped TiO{sub 2} nanoparticles prepared using a combined method of sol-gel and hydrothermal. The treated samples were characterized using Raman spectroscopy, Brunauer–Emmett–teller (BET) measurement, high resolution transmission electron microscopy (HRTEM), field-emission scanning electron microscopy (FESEM), and diffuse reflectance UV-Vis spectroscopy (DR-UV-Vis). Raman analysis showed that all samples displayed anatase (101) phase of TiO{sub 2}, which is in good agreement with the TEM results. BET data showed that all prepared Cu-Ni/TiO{sub 2} with different calcination temperature are mesoporous. SEM images displayed spherical particles with typical size of about 15 to 20 nm. UV-Vis spectra illustrated that the absorbance edge of all prepared Cu-Ni/TiO{sub 2} have extended to the visible region with bandgap energies (2-2.1 eV) less than the pure anatase TiO{sub 2} (3.2 eV). Calcination temperature of 450°C is considered to be the optimum as it converts the synthesized Cu-Ni/TiO{sub 2} sample to have smaller average particle size with higher surface area that lead to more absorbance in the visible region and lower bandgap energy.

36 MATERIALS SCIENCE↗

To study the effect of doping concentration of silver on structural and optical properties of cadmium oxide (CdO) nanostructure

The present work deals with study of structural and optical properties of Silver (Ag) doped Cadmium oxide (CdO) nanostructured synthesized by Chemical Co-precipitation Techniques followed by calcinations at small temperature. The doping concentrations were changing from 0.1 to 10 at% respectively. Structural analysis study of these calcined materials is carried out by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). The optical properties of calcined samples were investigating by Fourier transformation infrared (FTIR)spectroscopy, UV-Visible Spectroscopy (UV-Vis). The structural properties analysis results revels that crystallite size are in the range of nano region and TEM results are quite in accordance with XRD results.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Production of LEU fully ceramic microencapsulated fuel for irradiation testing

The Advanced Fuels Campaign of the US DOE Fuel Cycle Research/Development program is currently engaged in production of FCM fuel for irradiation testing in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL). FCM fuel production is a serial process with 3 major steps namely kernel, TRISO, and compact production. The first step in the kernel process is production of air-dried UO{sub 3} gel spheres with suspended carbon particles. These spheres, roughly 2 mm in size, are then calcined to produce a mixture of UO{sub 2} and carbon. This calcination step may be performed in either argon, hydrogen, or mixtures of these gases. Once the calcination step is complete, temperature is increased (>1400 Celsius degrees) to convert this mixture to UO{sub 2} + UC{sub x}. Once dense oxide-carbide kernels are available, the inert environment is switched to a nitrogen containing one to facilitate carbothermic reduction of kernels and production of UN. Essentially, the oxygen and carbon in the oxide-carbide kernels react with one another to produce CO and are replaced with nitrogen inside the lattice. The TRISO step in fuel production is incorporation of a porous carbon buffer layer, a dense inner pyrolytic carbon layer (IPyC), a SiC layer, and finally and outer pyrolytic carbon layer (OPyC) onto the UN kernels. The coating layer deposition step is carried out inside a graphite furnace using a fluidized bed chemical vapor deposition (CVD) process. In essence, a mixture of reactant and inert gasses flow from the bottom through a bed of particles that are in turn fluidized by the gas stream. The particles undergo CVD and once a different coating layer is to be incorporated, the furnace temperature is adjusted and the reactant gases are changed. The final step in the series of fuel production activities is the consolidation of UN TRISO particles inside the SiC matrix to produce cylindrical pellets. It entails 3 critical areas: SiC powder mixing, over-coating of particles, and high-temperature densification. Optimal execution of the powder mixing step is vital to achieve a fully dense SiC matrix at the end of the process. The SiC matrix is consolidated using a special form of liquid phase sintering (LPS) involving nano-powder feedstock that is designated as the NITE process. The SiC nano-powder slurry is sprayed directly onto the particle surface using a piezoelectric nozzle. Once the over-coated particles are available, final consolidation step at high temperatures (1875 Celsius degrees) is carried out.

36 MATERIALS SCIENCE↗

In Situ Diffraction and Ex Situ Transmission X‐Ray Microscopy Studies of Solid‐State Upcycling for NMC Cathodes

Upcycling of recycled LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) cathodes offers an economical route to produce cathode materials with increased energy density (i.e., LiNi 0.8 Mn 0.1 Co 0.1 O 2 , NMC811) that meet the performance needs of present-day electric vehicles. In this work, solid-state upcycling of NMC622 via calcination with Ni(OH) 2 and LiOH was monitored using in situ synchrotron powder X-ray diffraction measurements. Sequential Rietveld refinements indicate that the calcination proceeds by initially converting Ni(OH) 2 to a rocksalt NiO phase followed by lithiation of NiO to form LiNiO 2 (LNO), with both NMC and LNO phases present in nearly equal proportions at the calcination endpoint. Variable-energy transmission X-ray microscopy tomograms of upcycled samples reveal that the NMC and LNO domains are intermixed at sub-micron length scales. Depth-dependent analysis of multi-elemental fitting maps matches the expected NMC811 composition at the secondary particle level and indicates that transition metal diffusion is not limited by the secondary particle size.

cathode upcycling↗

Characterization of PuO 2 With Visible and UV Raman Spectroscopy: Discrimination Between the Bulk, Surface, and an Intermediate Disordered Layer

Raman spectroscopy is an ideal tool in the characterization of materials including PuO 2 . The wavelength-dependent absorptivity of the material defines the light penetration depth and the relative Raman scattering contribution from the bulk and the surface. Here, the surface contribution to the total Raman scattering was investigated for PuO 2 calcined at various temperatures and recorded with laser wavelengths of 355, 325, and 244 nm. These experiments provided the first glimpse of the wavelength-dependent disappearance and emergence of new phonons and electronic bands from the PuO 2 surface layers. The first indication of the wavelength transition in the Raman spectra was the loss of the 2LO2 (overtone, ~1155 cm -1 ) band and the weakening intensity of the Г 1 → Γ 5 electronic band (~2135 cm -1 ) with the 355-nm excitation laser. The Γ 5 electronic band was barely visible with the 244-nm excitation. The electronic band located at ~1050 cm -1 , corresponding to the Г 1 → Γ 4 electronic transition was observed to dramatically increase in intensity while the Г 1 → Γ 3 electronic band (2640 cm -1 ) sharpened as the UV wavelength was increased in energy from the near- to deep-UV (355–325–244 nm). The FWHM of the T 2g band was found to vary with calcination temperature (450°C and 900°C) with the 325-nm laser and the 244-nm laser. The T 2g band attributes, the strong emergence of the Г 1 → Γ 4 electronic band, and the disappearance of the 2LO2 overtone acquired with the 244-nm excitation for the different calcination temperatures suggest a shallow penetration depth.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Metal organic framework-mediated synthesis of potassium-promoted cobalt-based catalysts for higher oxygenates synthesis

Syngas to higher oxygenates conversion was carried out on a series of potassium-promoted cobalt-based catalysts. Catalysts with different potassium composition were prepared by metal organic framework-mediated synthesis, which is the calcination of the ZIF-67 metal organic framework (MOF). Cobalt skeleton structure that originated from the MOF is preserved after the calcination. The calcined catalysts consist of Co 3 O 4 nanoparticles and surface carbon. The catalysts were reduced by H 2 /He prior to the reaction. CO hydrogenation was carried out at various temperatures (270 °C, 300 °C and 325 °C) and at 40 bar, with H 2 /CO = 1/1. The formation of methane and higher hydrocarbons is suppressed by potassium, and cobalt carbide is formed from metallic cobalt during the reaction. Thus, the K-promoted cobalt based catalyst synthesized by the MOF-mediated synthesis shows higher selectivity to ethanol, acetaldehyde and higher oxygenates, even at high temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controllable oxygen vacancy defect engineering of BiVO 4 porous structures for room temperature NH 3 detection

Controlling structural features of sensing material while judiciously introducing vacancy defect states for revamping the electronic properties of the sample to obtain its superior gas sensing performance, is quite rare. Herein, we report for the first time, the room temperature (RT) ammonia (NH 3 ) detection of peanut-like porous bismuth vanadate (BiVO 4 ) with a stable monoclinic phase. The developed BiVO 4 possess abundant oxygen vacancies and porosity by virtue of calcinations (400–800 ℃). BiVO 4 calcined at 400 ℃ exhibits high selectivity towards NH 3 with a maximum response of 1421 @ 270 ppm at RT, which is 2.5 fold enhanced compared to without calcined BiVO 4 (response of 547 @ 270 ppm NH 3 ). The oxygen defective BiVO 4 appeared highly durable and stable even under high humid conditions (∼60 %). Besides, the porosity of BiVO 4 not only enhances the specific surface area (19.8 m 2 /g) but also results in fast diffusion of NH 3 molecules, leading to a reduction in the decay time (34 s for 90 ppm NH 3 ). The density functional theory (DFT) uncovers that the oxygen vacancy formation in BiVO 4 augments the NH 3 sensing capabilities by enhancing the adsorption energy of NH 3 . This work provides insight into the sensing mechanism of increased response caused by defect engineering and porosity, which will be favourable for fabricating high-performance NH 3 sensors at RT.

DFT analysis↗

Effect of doping on the performance of high-crystalline SrMnO 3 perovskite nanofibers as a supercapacitor electrode

Perovskite oxides are promising multi-functional materials with enhanced physical and chemical properties. In this study, high-crystalline SrMnO 3 perovskite oxide nanofibers have been successfully synthesized by sol–gel electrospinning followed by calcination at different temperatures, using polyvinylpyrrolidone as a sacrificial polymeric binder. The change in porosity and grain size with calcination temperature imparted a substantial effect on the electrochemical properties of the obtained SrMnO 3 nanofibers. The SrMnO 3 nanofiber electrode calcined at 700 °C exhibits an electrochemical capacitance of 321.7 F g –1 at a discharge current density of 0.5 A g –1 . Here, the effect of doping Ba/Ca on Sr, and Co/Fe/Ni on Mn, respectively, on the specific capacitance of SrMnO 3 nanofibers is studied. 20 mol% Ba loading shows the best performance as a supercapacitor electrode with a specific capacitance of 446.8 F g –1 at a discharge current density of 0.5 A g –1 . The nanofibers retained 87% its initial capacitance after 5000 successive cycles. The device fabricated using the nanofibers show an energy density of 37.3 W h kg –1 at a power density of 400 W kg –1 , and it is retained as 15.7 W h kg –1 even at a high-power density of 8006 W kg –1 , indicating the potential of this electrode material for high-rate charge/discharge operations in supercapacitors.

36 MATERIALS SCIENCE↗