Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “building blocks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

VLSI architecture for a Reed-Solomon decoder

A basic single-chip building block for a Reed-Solomon (RS) decoder system is partitioned into a plurality of sections, the first of which consists of a plurality of syndrome subcells each of which contains identical standard-basis finite-field multipliers that are programmable between 10 and 8 bit operation. A desired number of basic building blocks may be assembled to provide a RS decoder of any syndrome subcell size that is programmable between 10 and 8 bit operation.

Hsu, In-Shek↗
DOE OSTI2020

Flexible polyurethanes, renewable fuels, and flavorings from a microalgae oil waste stream

Renewable polymers have become an important focus in next-generation materials, and algae biomass offers an environmentally low-impact feedstock that can serve multiple uses. This study aims to develop a scalable methodology for production of microalgae-based polyols for polyurethane synthesis from waste oils derived from algae biomass. Following separation of omega-3 fatty acids from algae oil, residual oils can offer valuable building blocks for petrochemical replacements. However, unlike vegetable oils, algae oils contain organic contaminants, including photosynthetic pigments and hydrophobic cofactors that can complicate preparative methodologies. Here we convert and purify waste streams from omega-3 depleted Nannochloropsis salina algae oil, with major components consisting of palmitic and palmitoleic acid, into azelaic acid (AA) as a building block for flexible polyurethanes, with a simultaneous production of heptanoic acid (HA) as a flavor and fragrance precursor. Conversion of free fatty acid mixtures into a soft soap allows extraction of organic contaminants, and urea complexation provides isolated palmitoleic acid, which is subsequently ozonolyzed to produce AA and HA. Bio-based polyester diols are prepared from AA via esterification to provide a polyol monomer for flexible polyurethane foam preparation. The HA co-product is modified to produce the flavoring agent methyl heptanoate and also decarboxylated to produce hexane as a renewable solvent. This scalable process can be performed on oils from multiple algal species, offering valuable monomers from a highly sustainable source.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Isolation of individual Er quantum emitters in anatase TiO 2 on Si photonics

Defects and dopant atoms in solid state materials are a promising platform for realizing single photon sources and quantum memories, which are the basic building blocks of quantum repeaters needed for long distance quantum networks. In particular, trivalent erbium (Er 3+ ) is of interest because it couples C-band telecom optical transitions with a spin-based memory platform. In order to produce quantum repeaters at the scale required for quantum networks it is imperative to integrate these necessary building blocks with mature and scalable semiconductor processes. Here, in this work, we demonstrate the optical isolation of single Er 3+ ions in CMOS-compatible titanium dioxide (TiO 2 ) thin films monolithically integrated on a silicon-on-insulator photonics platform. Our results demonstrate an initial step toward the realization of a monolithically integrated and scalable quantum photonics package based on Er 3+ doped thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

High Energy Neutrino Physics

Of the twelve subatomic particles that are the building blocks of all the known matter in the universe, three are neutrinos, small neutral particles that interact through the weak interaction with other particles in the Universe. These three neutrinos, paired with the three charged leptons, the familiar electron, the heavier muon, and the still heavier tau, are some of the least well understood particles of these building blocks. Experiments using accelerator beams, like those that are the subject of this grant, can address some of the key questions scientists are posing with respect to the neutrino. Specifically, are there differences between neutrinos and their anti-particles, anti-neutrinos, that could give us some clue to the matter dominated universe, do we understand the spectrum of masses of the three neutrinos, and are there other kinds of neutirnos than the three neutrinos? Coupled with advances in precision neutrino detection, the US is addressing these questions from small scale experiments to the massive DUNE experiment. PI Fleming and her team play critical roles in accelerator based neutrino physics at short and long baseline with participation on MicroBooNE, SBND, and with the group's participation in DUNE. These experiments are at the heart of the US-based high energy physics program.

43 PARTICLE ACCELERATORS↗
NASA NTRS1980

Road map to adaptive optimal control

A building block control structure leading toward adaptive, optimal control for jet engines is developed. This approach simplifies the addition of new features and allows for easier checkout of the control by providing a baseline system for comparison. Also, it is possible to eliminate certain features that do not have payoff by being selective in the addition of new building blocks to be added to the baseline system. The minimum risk approach specifically addresses the need for active identification of the plant to be controlled in real time and real time optimization of the control for the identified plant.

Boyer, R.↗
DOE OSTI2020

Unprecedented generation of 3D heterostructures by mechanochemical disassembly and re-ordering of incommensurate metal chalcogenides

Three-dimensional heterostructures are usually created either by assembling two-dimensional building blocks into hierarchical architectures or using stepwise chemical processes that sequentially deposit individual monolayers. Both approaches suffer from a number of issues, including lack of suitable precursors, limited reproducibility, and poor scalability of the preparation protocols. Therefore, development of alternative methods that enable preparation of heterostructured materials is desired. We create heterostructures with incommensurate arrangements of well-defined building blocks using a synthetic approach that comprises mechanical disassembly and simultaneous reordering of layered transition-metal dichalcogenides, MX 2 , and non-layered monochalcogenides, REX, where M = Ta, Nb, RE = Sm, La, and X = S, Se. We show that the discovered solid-state processes are rooted in stochastic mechanochemical transformations directed by electronic interaction between chemically and structurally dissimilar solids toward atomic-scale ordering, and offer an alternative to conventional heterostructuring. Details of composition–structure–properties relationships in the studied materials are also highlighted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Programming Function via Soft Materials (PFvSM) (Final Report)

The PFvSM cluster at the University of Illinois greatly deepened the science of soft materials and expanded the means for embedding within them unprecedented functionalities. We pioneered a mesoscopic approach to materials design that combined leading competencies in fundamental experimental and theoretical soft matter science and fabrication that powerfully establishes equilibrium and nonequilibrium assembly of novel and complex building blocks as a preeminent contributor to progress in materials chemistry. Our cluster’s vision was an integrated program of work centered on soft matter science with the ultimate goal of impacting important energy technologies. As elementary units we employed function-encoded colloids, nanoparticles, large mesh fibrillar gels, deterministically fabricated networks and hybrid objects. These materials were employed as building blocks for diverse model systems that allowed fundamental soft matter principles of wide relevance to be established. Their assembly into materials with useful functional behavior provided new approaches to challenging problems in basic energy science including energy harvesting, transport and storage. To achieve these goals the cluster brought together a team of recognized world-leaders in materials synthesis and processing, in-situ characterization, theory and modeling, and materials design, integration and fabrication

36 MATERIALS SCIENCE↗
NASA NTRS1994

Impact force as a scaling parameter

The Federal Aviation Administration (FAR PART 25) requires that a structure carry ultimate load with nonvisible impact damage and carry 70 percent of limit flight loads with discrete damage. The Air Force has similar criteria (MIL-STD-1530A). Both civilian and military structures are designed by a building block approach. First, critical areas of the structure are determined, and potential failure modes are identified. Then, a series of representative specimens are tested that will fail in those modes. The series begins with tests of simple coupons, progresses through larger and more complex subcomponents, and ends with a test on a full-scale component, hence the term 'building block.' In order to minimize testing, analytical models are needed to scale impact damage and residual strength from the simple coupons to the full-scale component. Using experiments and analysis, the present paper illustrates that impact damage can be better understood and scaled using impact force than just kinetic energy. The plate parameters considered are size and thickness, boundary conditions, and material, and the impact parameters are mass, shape, and velocity.

Poe, Clarence C., Jr.↗
DOE OSTI2023

Toward implementing autonomous adaptive data acquisition for scanning hyperspectral imaging of biological systems

Autonomous experimentation is an emerging area of research, primarily related to autonomous vehicles, scientific combinatorial discovery approaches in materials science and drug discovery, and iterative research loops of planning, experimentation, and analysis. However, autonomous approaches developed in these contexts are difficult to apply to high-dimensional mapping technologies, such as scanning hyperspectral imaging of biological systems, due to sample complexity and heterogeneity. We briefly cover the history of adaptive sampling algorithms and surrogate modeling in order to define autonomous adaptive data acquisition as an objective-based, flexible building block for future biological imaging experimentation driven by intelligent infrastructure. We subsequently summarize the recent implementations of autonomous adaptive data acquisition (AADA) for scanning hyperspectral imaging, assess how these address the difficulties of autonomous approaches in hyperspectral imaging, and highlight the AADA design variation from a goal-oriented perspective. Finally, we present a modular AADA architecture that embeds AADA-driven flexible building blocks to address the challenge of time resolution for high-dimensional scanning hyperspectral imaging of nonequilibrium dynamical systems. In our example research-driven experimental design case, we propose an AADA infrastructure for time-resolved, noninvasive, and label-free scanning hyperspectral imaging of living biological systems. This AADA infrastructure can accurately target the correct state of the system for experimental workflows that utilize subsequent expensive, high-information-content analytical techniques.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2015

Failure Predictions of Out-of-Autoclave Sandwich Joints with Delaminations under Flexure Loads

An analysis and a test program was conducted to investigate the damage tolerance of composite sandwich joints. The joints contained a single circular delamination between the face-sheet and the doubler. The coupons were fabricated through out-of-autoclave (OOA) processes, a technology NASA is investigating for joining large composite sections. The four-point bend flexure test was used to induce compression loading into the side of the joint where the delamination was placed. The compression side was chosen since it tends to be one of the most critical loads in launch vehicles. Autoclave cure was used to manufacture the composite sandwich sections, while the doubler was co-bonded onto the sandwich face-sheet using an OOA process after sandwich panels were cured. A building block approach was adopted to characterize the mechanical properties of the joint material, including the fracture toughness between the doubler and facesheet. Twelve four-point-bend samples were tested, six in the sandwich core ribbon orientation and six in sandwich core cross-ribbon direction. Analysis predicted failure initiation and propagation at the pre-delaminated location, consistent with experimental observations. A building block approach using fracture analyses methods predicted failure loads in close agreement with tests. This investigation demonstrated a small strength reduction due to a flaw of significant size compared to the width of the sample. Therefore, concerns of bonding an OOA material to an in-autoclave material was mitigated for the geometries, materials, and load configurations considered.

Damage↗
NASA NTRS2018

Probing Neodymium Isotopic Variations in the Inner Solar System

One of the key problems in planetary science is the identification of the building blocks of Earth, and whether they exist within our current collection of meteorites. Stable mass independent isotopic anomalies, usually nucleosynthetic in origin, are a key tool in fingerprinting material coming from different accretionary regions within the protoplanetary disk. For a number of isotopic systems such as O, Ni, Ti and Cr, enstatite chondrites (EC) appear to be the strongest candidates for Earth's building blocks, despite their low Mg/Si ratios relative to the bulk Earth. It has been proposed that Earth, the Moon-forming impactor and enstatite chondrites all were originally sourced from the same reservoir in the protoplanetary disk, but subsequently experienced divergent chemical evolution pathways. This was recently challenged by who used the correlation between Mo and Nd isotopes in bulk meteorites to argue that such a reservoir does not exist as the isotopic composition of enstatite chondrites is resolvable from Earth. However, in detail the Nd isotopic ratios of EC ((142)Nd/(144)Nd, (148)Nd/(144)Nd, (150)Nd/(144)Nd) show considerable variability, and overlap significantly with the isotopic composition of both the bulk Earth and ordinary chondrites (OC). previously identified Nd isotopic variability in EC, linking it to the degree of equilibration the meteorite had experienced, however they only focused on collecting high precision (142)Nd/(144)Nd, which also has contributions from the decay of the short-lived Sm-146 nuclide (t(sub 1/2) ~103 Myr), making identification of nucleosynthetic anomalies less clear. While the study of reports all the Nd isotopic ratios measured at high precision, only equilibrated EC were analyzed. Therefore, with the currently published data it is unclear to what extent thermal equilibration in the EC is responsible for the variation observed in the stable Nd isotopic ratios, and whether the EC reservoir can be resolved from Earth. In order to better understand the genetic relationship between enstatite chondrites and the Earth we are carrying out a more systematic study including both equilibrated and unequilibrated enstatite chondrites, focusing on high precision analysis of all the stable Nd isotopic ratios.

SOLAR SYSTEM↗
NASA NTRS2015

Failure Predictions of Out-of-Autoclave Sandwich Joints with Delaminations Under Flexure Loads

An analysis and a test program was conducted to investigate the damage tolerance of composite sandwich joints. The joints contained a single circular delamination between the face-sheet and the doubler. The coupons were fabricated through out-of-autoclave (OOA) processes, a technology NASA is investigating for joining large composite sections. The four-point bend flexure test was used to induce compression loading into the side of the joint where the delamination was placed. The compression side was chosen since it tends to be one of the most critical loads in launch vehicles. Autoclave cure was used to manufacture the composite sandwich sections, while the doubler was co-bonded onto the sandwich face-sheet using an OOA process after sandwich panels were cured. A building block approach was adopted to characterize the mechanical properties of the joint material, including the fracture toughness between the doubler and face-sheet. Twelve four-point-bend samples were tested, six in the sandwich core ribbon orientation and six in sandwich core cross-ribbon direction. Analysis predicted failure initiation and propagation at the pre-delaminated location, consistent with experimental observations. A building block approach using fracture analyses methods predicted failure loads in close agreement with tests. This investigation demonstrated a small strength reduction due to a flaw of significant size compared to the width of the sample. Therefore, concerns of bonding an OOA material to an in-autoclave material was mitigated for the geometries, materials, and load configurations considered.

Tolerance↗
NASA NTRS1987

Investigation into the development of computer aided design software for space based sensors

The described effort is phase one of the development of a Computer Aided Design (CAD) software to be used to perform radiometric sensor design. The software package will be referred to as SCAD and is directed toward the preliminary phase of the design of space based sensor system. The approach being followed is to develop a modern, graphic intensive, user friendly software package using existing software as building blocks. The emphasis will be directed toward the development of a shell containing menus, smart defaults, and interfaces, which can accommodate a wide variety of existing application software packages. The shell will offer expected utilities such as graphics, tailored menus, and a variety of drivers for I/O devices. Following the development of the shell, the development of SCAD is planned as chiefly selection and integration of appropriate building blocks. The phase one development activities have included: the selection of hardware which will be used with SCAD; the determination of the scope of SCAD; the preliminary evaluation of a number of software packages for applicability to SCAD; determination of a method for achieving required capabilities where voids exist; and then establishing a strategy for binding the software modules into an easy to use tool kit.

Pender, C. W.↗
NASA NTRS1991

NASA information systems commonality and convergence

Efforts to identify high payback functions performed by the Office of Space Science Applications (OSSA) data systems package existing operationally proven implementations as system building blocks and foster their use in the OSSA environment. An overview is given of the current state of OSSA data systems and the major challenges facing system developers over the next five years. Current trends in system commonality are discussed, and development is examined in the context of system design. Central system engineering approaches to solving the commonality and interoperability challenges are described. Efforts to package three diverse building blocks and to foster their reuse are documented.

Handley, Thomas H., Jr.↗
DOE OSTI2021

Transparent silica aerogel slabs synthesized from nanoparticle colloidal suspensions at near ambient conditions on omniphobic liquid substrates

This paper presents a novel sol-gel method to synthesize large and thick silica aerogel monoliths at near ambient conditions using a commercial aqueous solution of colloidal silica nanoparticles as building blocks. To achieve slabs with high visible transmittance and low thermal conductivity, the method combines the strategies of (i) synthesizing gels on an omniphobic perfluorocarbon liquid substrate, (ii) aging at temperatures above room temperature, and (iii) performing solvent exchange with a low-surface-tension organic solvent prior to ambient drying. The omniphobic liquid substrates were used to prevent cracking and ensure an optically-smooth surface, while nanoparticle building blocks were small (<10 nm) to limit volumetric light scattering. Gels were aged at temperatures between 25 and 80 °C for up to 21 days to make them stronger and stiffer and to reduce shrinkage and cracking during ambient drying. Ambient drying was achieved by first exchanging water in the gel pores for octane, followed by drying in an octane-rich atmosphere to decrease capillary forces. The synthesized nanoparticle-based silica aerogel monoliths had thicknesses up to 5 mm, diameters up to 10 cm, porosities exceeding 80%, and thermal conductivities as low as 0.08 W m –1 K –1 . Notably, the slabs featured visible transmittance exceeding 75% even for slabs as thick as 5 mm. The as-synthesized aerogel monoliths were exposed to TMCS vapor to induce hydrophobic properties resulting in a water contact angle of 140° that prevented water infiltration into the pores and protected the aerogels from water damage. This simple synthesis route conducted at near ambient conditions produces hydrophobic aerogel monoliths with promising optically transparent and thermally insulating properties that can be adhered to glass panes for window insulation and solar-thermal energy conversion applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A historical perspective on porphyrin-based metal–organic frameworks and their applications

Porphyrins are important molecules widely found in nature in the form of enzyme active sites and visible light absorption units. Recent interest in using these functional molecules as building blocks for the construction of metal–organic frameworks (MOFs) have rapidly increased due to the ease in which the locations of, and the distances between, the porphyrin units can be controlled in these porous crystalline materials. Porphyrin-based MOFs with atomically precise structures provide an ideal platform for the investigation of their structure–function relationships in the solid state without compromising accessibility to the inherent properties of the porphyrin building blocks. Here, this review will provide a historical overview of the development and applications of porphyrin-based MOFs from early studies focused on design and structures, to recent efforts on their utilization in biomimetic catalysis, photocatalysis, electrocatalysis, sensing, and biomedical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2015

Modular Rapidly Manufactured Small Satellite (MRMSS)

The Modular Rapidly Manufactured Small Satellite (MRMSS) project applies modular building block systems to space applications. The need to reduce mass for spaceflight applications and reuse resources is a critical technology for long duration space missions. Mass reduction and reuse of material will help bring down costs for spaceflight missions and open up more possibilities for exploration and research. The MRMSS project consists of two major components: A basic research component demonstrating electronic digital materials, and a technology demonstration applying the modular building block based systems concept to the CubeSat form factor. This paper describes the core technologies developed to enable the modular system as well the first flight demonstration on a sounding rocket.

Modular Architecture↗
DOE OSTI2024

Space-tiled colloidal crystals from DNA-forced shape-complementary polyhedra pairing

Generating space-filling arrangements of most discrete polyhedra nanostructures of the same shape is not possible. However, if the appropriate individual building blocks are selected (e.g., cubes), or multiple shapes of the appropriate dimensions are matched (e.g., octahedra and tetrahedra) and their pairing interactions are subsequently forced, space-filled architectures may be possible. With flexible molecular ligands (polyethylene glycol–modified DNA), the shape of a polyhedral nanoparticle can be deliberately altered and used to realize geometries that favor space tessellation. In this work, 10 new colloidal crystals were synthesized from DNA-modified nanocrystal building blocks that differed in shapes and sizes, designed to form space-filling architectures with micron-scale dimensions. The insights and capabilities provided by this new strategy substantially expand the scope of colloidal crystals possible and provide an expanded tool kit for researchers interested in designing metamaterials.

Science & Technology - Other Topics↗