Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “aqueous processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Titanium Carbide MXene Hole Contacts for CdTe Photovoltaics

CdTe is a high‐efficiency thin‐film photovoltaic technology that has seen tremendous commercial success over the past decade. Yet despite the improvement of other device characteristics, the fabrication of an ohmic hole back contact layer has remained a challenge due to the high ionization potential of CdTe, which limits the external potential that can be feasibly reached even as other characteristics of the device improve. MXenes, a family of 2D materials with rapidly growing scientific and commercial interest, offer a promising route to forming low‐cost, low‐barrier contacts due to their demonstrated high work function, metallic conductivity, and facile solution processing from benign solvents. Here, it is shown that Ti 3 C 2 T x MXene films processed from an aqueous colloidal dispersion can perform as a highly efficient hole contact material for CdTe solar cells, resulting in high power‐conversion efficiencies. The role of the Schottky barrier formation in Ti 3 C 2 T x ‐contacted CdTe devices is probed, and potential pathways for the future development of this potent combination of materials are elucidated. The modularity of the expansive MXene family of materials presents a promising strategy for developing next‐generation hole contacts for CdTe solar cells.

14 SOLAR ENERGY↗

Structural characterization of poorly-crystalline scorodite, iron(III)-arsenate co-precipitates and uranium mill neutralized raffinate solids using X-ray absorption fine structure spectroscopy

X-ray absorption fine structure (XAFS) is used to characterize the mineralogy of the iron(III)-arsenate(V) precipitates produced during the raffinate (aqueous effluent) neutralization process at the McClean Lake uranium mill in northern Saskatchewan, Canada. To facilitate the structural characterization of the precipitated solids derived from the neutralized raffinate, a set of reference compounds were synthesized and analyzed. The reference compounds include crystalline scorodite, poorly-crystalline scorodite, iron(III)-arsenate co-precipitates obtained under different pH conditions, and arsenate-adsorbed on goethite. The poorly-crystalline scorodite (prepared at pH 4 with Fe/As = 1) has similar As local structure as that of crystalline scorodite. Both As and Fe K-edge XAFS of poorly-crystalline scorodite yield consistent results on As-Fe (or Fe-As) shell. From As K-edge analysis the As-Fe shell has an inter-atomic distance of 3.33 ± 0.02 Å and coordination number of 3.2; while from Fe K-edge analysis the Fe-As distance and coordination number are 3.31 ± 0.02 Å and 3.8, respectively. These are in contrast with the typical arsenate adsorption on bidentate binuclear sites on goethite surfaces, where the As-Fe distance is 3.26 ± 0.03 Å and coordination number is close to 2. A similar local structure identified in the poorly-crystalline scorodite is also found in co-precipitation solids (Fe(III)/As(V) = 3) when precipitated at the same pH (pH = 4): As-Fe distance 3.30 ± 0.03 Å and coordination number 3.9; while at pH = 8 the co-precipitate has As-Fe distance of 3.27 ± 0.03 Å and coordination number about 2, resembling more closely the adsorption case. The As local structure in the two neutralized raffinate solid series (precipitated at pH values up to 7) closely resembles that in the poorly-crystalline scorodite. All of the raffinate solids have the same As-Fe inter-atomic distance as that in the poorly-crystalline scorodite, and a systematic decrease in the As-Fe coordination is observed when pH is progressively increased; the basic poorly-crystalline scorodite structural feature remains in the raffinate solid up to pH 7.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

High surface area neodymium phosphate nano particles by modified aqueous sol-gel method

Graphical abstract: Synthesis of nano rod shaped neodymium phosphate particles with specific surface area as high as 107 m{sup 2} g{sup -1} and particles could be compacted and sintered at as low as 1300 Degree-Sign C to a density of 98.5% (theoretical) with an average grain size of {approx}1 {mu}m. Highlights: Black-Right-Pointing-Pointer Nano size neodymium phosphate is synthesized and characterized using a novel modified aqueous sol gel process. Black-Right-Pointing-Pointer Specific surface area above 100 m{sup 2} g{sup -1} achieved without the addition of any complexing agents. Black-Right-Pointing-Pointer High sintered density reported than the density obtained for powder synthesized through conventional solid state reaction. Black-Right-Pointing-Pointer The particles are nano sized and have rod shape morphology and are retained at higher temperatures. Black-Right-Pointing-Pointer An average grain size of {approx}1 {mu}m obtained for sintered NdPO{sub 4} after thermal etching at 1400 Degree-Sign C. -- Abstract: Synthesis of nano rod shaped neodymium phosphate (NdPO{sub 4}) particles with specific surface area as high as 107 m{sup 2}g{sup -1} and an average length of 50 nm with aspect ratio 5 was achieved using modified sol gel method. Crystallite size calculated from the X-ray diffraction data by applying Scherer equation was 5 nm for the precursor gel after calcination at 400 Degree-Sign C. NdPO{sub 4} was first precipitated from neodymium nitrate solution using phosphoric acid followed by peptization using dilute nitric acid and further gelation in ammonia atmosphere. The calcined gel powders were further characterized by surface area (Brunauer-Emmet-Teller nitrogen adsorption analysis), Transmission electron microscopy, scanning electron microscopy, UV-vis and FT-IR analysis. Transmission electron microscopy confirms the formation of rod like morphology from the sol, gel and the calcined particles in nano size range. These particles could be compacted and sintered at as low as 1300 Degree-Sign C to a density of 98.5% (theoretical) with an average grain size of {approx}1 {mu}m.

36 MATERIALS SCIENCE↗

Ab initio metadynamics calculations reveal complex interfacial effects in acetic acid deprotonation dynamics

Acid-base reactions play a central role in solution chemistry, with carboxylic acids being particularly important in atmospheric chemical processes. In this work, we harness metadynamics calculations with Born-Oppenheimer molecular dynamics (BOMD) simulations to understand deprotonation dynamics of acetic acid (CH 3 COOH) in both bulk and air-water interfacial environments. Collective variables are carefully chosen in our well-tempered metadynamics simulations to capture the deprotonation process in various aqueous configurations. Herein, our findings show that the free energy barrier for deprotonation of acetic acid at the air-water interface is lower than in the bulk, in accordance with the available experimental data. Furthermore, our well-tempered metadynamics calculations suggest that the variations in free energy are primarily due to intricate solvation shell effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reductive biomining of pyrite by methanogens

Pyrite (FeS 2 ) is the most abundant iron sulfide mineral in Earth’s crust. Until recently, FeS 2 has been considered a sink for iron (Fe) and sulfur (S) at low temperature in the absence of oxygen or oxidative weathering, making these elements unavailable to biology. However, anaerobic methanogens can transfer electrons extracellularly to reduce FeS 2 via direct contact with the mineral. Reduction of FeS 2 occurs through a multistep process that generates aqueous sulfide (HS – ) and FeS 2 -associated pyrrhotite (Fe 1-x S). Subsequent dissolution of Fe 1-x S provides Fe(II) (aq) , but not HS – , that rapidly complexes with HS – (aq) generated from FeS 2 reduction to form soluble iron sulfur clusters [nFeS (aq) ]. Cells assimilate nFeS (aq) to meet Fe/S nutritional demands by mobilizing and hyperaccumulating Fe and S from FeS 2 . As such, reductive dissolution of FeS 2 by methanogens has important implications for element cycling in anoxic habitats, both today and in the geologic past.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self-assembly of aramid amphiphiles into ultra-stable nanoribbons and aligned nanoribbon threads

Small molecule self-assembly is an established route for producing high surface area nanostructures with readily customizable chemistries and precise molecular organization. However, these structures are fragile, exhibiting molecular exchange, migration, and rearrangement - among other dynamic instabilities - and ultimately disassociate upon drying. Here we show a small molecule platform, the aramid amphiphile (AA), that overcomes these dynamic instabilities by incorporating a Kevlar-inspired domain into the molecular structure. Strong, anisotropic interactions between AAs suppress molecular exchange and elicit spontaneous self-assembly in water to form nanoribbons with lengths of up to 20 microns. The nanoribbons have a Young’s modulus of 1.7 GPa and tensile strength of 1.9 GPa. Here, we exploit this stability to extend small molecule self-assembly to hierarchically ordered macroscopic materials outside of solvated environments. Through an aqueous shear alignment process, we organize AA nanoribbons into arbitrarily long flexible threads that support 200 times their weight when dried. Tensile tests of the threads provide a benchmark for Young’s moduli (between ~400 and 600 MPa) and extensibilities (between ~0.6 and 1.1%) that depend on the counterion chemistry in solution. This bottom-up approach to macroscopic materials could benefit solid-state applications, historically inaccessible by self-assembled nanomaterials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A Study of Cloud Processing of Organic Aerosols Using Models and CHAPS Data

The main theme of our work has been the identification of parameters that mostly affect the formation and modification of aerosol particles and their interaction with water vapor. Our detailed process model studies led to simplifications/parameterizations of these effects that bridge detailed aerosol information from laboratory and field studies and the need for computationally efficient expressions in complex atmospheric models. One focus of our studies has been organic aerosol mass that is formed in the atmosphere by physical and/or chemical processes (secondary organic aerosol, SOA) and represents a large fraction of atmospheric particulate matter. Most current models only describe SOA formation by condensation of low volatility (or semivolatile) gas phase products and neglect processes in the aqueous phase of particles or cloud droplets that differently affect aerosol size and vertical distribution and chemical composition (hygroscopicity). We developed and applied models of aqueous phase SOA formation in cloud droplets and aerosol particles (aqSOA). Placing our model results into the context of laboratory, model and field studies suggests a potentially significant contribution of aqSOA to the global organic mass loading. The second focus of our work has been the analysis of ambient data of particles that might act as cloud condensation nuclei (CCN) at different locations and emission scenarios. Our model studies showed that the description of particle chemical composition and mixing state can often be greatly simplified, in particular in aged aerosol. While over the past years many CCN studies have been successful performed by using such simplified composition/mixing state assumptions, much more uncertainty exists in aerosol-cloud interactions in cold clouds (ice or mixed-phase). Therefore we extended our parcel model that describes warm cloud formation by ice microphysics and explored microphysical parameters that determine the phase state and lifetime of Arctic mixed-phase clouds.

54 ENVIRONMENTAL SCIENCES↗

Technetium Waste Form Development – Progress Report

The approach being followed to evaluate the use of an iron-based alloy waste form to immobilize the Tc-bearing waste streams generated during the aqueous and electrochemical processing of used fuel that is being studied in the DOE Advanced Fuel Cycle Initiative (AFCI) is presented in this report. The objective is to develop an alloy waste form that provides high waste loading within waste form processing limitations, meets waste form performance requirements for durability and the long-term retention of radionuclides, and can be produced with consistent physical, chemical, and radiological properties that meet regulatory acceptance requirements for disposal. Microanalysis using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) was used to analyze non-radioactive Fe-Mo-Re samples. A sample was prepared for SEM; however, significant unforeseen instrument problems led to delays in conducting the detailed work. The TEM was not available for this particular sample and therefore only preliminary SEM work can be reported. The results are in agreement with previous studies [Ebert 2009]; however, a rhenium-rich region within the Re-Mo phase is clearly visible.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Glass Ceramic Waste Forms for Combined CS+LN+TM Fission Products Waste Streams

In this study, glass ceramics were explored as an alternative waste form for glass, the current baseline, to be used for immobilizing alkaline/alkaline earth + lanthanide (CS+LN) or CS+LN+transition metal (TM) fission-product waste streams generated by a uranium extraction (UREX+) aqueous separations type process. Results from past work on a glass waste form for the combined CS+LN waste streams showed that as waste loading increased, large fractions of crystalline phases precipitated upon slow cooling. The crystalline phases had no noticeable impact on the waste form performance by the 7-day product consistency test (PCT). These results point towards the development of a glass ceramic waste form for treating CS+LN or CS+LN+TM combined waste streams. Three main benefits for exploring glass ceramics are: • Glass ceramics offer increased solubility of troublesome components in crystalline phases as compared to glass, leading to increased waste loading; • The crystalline network formed in the glass ceramic results in higher heat tolerance than glass; and • These glass ceramics are designed to be processed by the same melter technology as the current baseline glass waste form. It will only require adding controlled canister cooling for crystallization into a glass ceramic waste form. Highly annealed waste form (essentially crack free) with up to 50X lower surface area than a typical High-Level Waste (HLW) glass canister. Lower surface area translates directly into increased durability. This was the first full year of exploring glass ceramics for the Option 1 and 2 combined waste stream options. This work has shown that dramatic increases in waste loading are achievable by designing a glass ceramic waste form as an alternative to glass. Table S1 shows the upper limits for heat, waste loading (based on solubility), and the decay time needed before treatment can occur for glass and glass ceramic waste forms. The improvements are significant for both combined waste stream options in terms of waste loading and/or decay time required before treatment. For Option 1, glass ceramics show an increase in waste loading of 15 mass % and reduction in decay time of 24 years. Decay times of ≈50 years or longer are close to the expected age of the fuel that will be reprocessed when the modified open or closed fuel cycle is expected to be put into action. Option 2 shows a 2x to 2.5x increase in waste loading with decay times of only 45 years. Note that for Option 2 glass, the required decay time before treatment is only 35 years because of the waste loading limits related to the solubility of MoO 3 in glass. If glass was evaluated for similar waste loadings as those achieved in Option 2 glass ceramics, the decay time would be significantly longer than 45 years. These glass ceramics are not optimized, but already they show the potential to dramatically reduce the amount of waste generated while still utilizing the proven processing technology used for glass production.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Cheesecloth Alternatives Testing

Heat source plutonium oxide (HS-PuO 2 ) enriched with 65% or greater plutonium-238, is recovered and purified using an aqueous nitric acid process. Historically, cheesecloth has been employed for small spill clean-up and for routine housekeeping. However, the 2016 Department of Energy (DOE) Operating Experience report, entitled Nitrate Waste Evaluations, stated that the mixing of nitrate wastes with organic absorbents, such as cheesecloth, may render transuranic waste unacceptable for disposal at WIPP in the future. This report explores the feasibility of replacement of cheesecloth with an alternative sorbent wipe that has similar absorption and cleaning abilities and improved acid resistance. Currently, cheesecloth is used for three different functions in HS-PuO 2 operations: spill cleanup; general housekeeping operations such as cleaning glovebox floors and windows, balances, furnaces, etc.; and decontamination of iridium cladded heat sources containing HS-PuO 2 . Alternatives used for spill cleanup must be able to tolerate high neutron doses found in the HS-Pu gloveboxes. They must also be able to withstand exposure to nitric acid concentrations up to 15.8 M without decomposing. Wipes used for general housekeeping must also be durable enough to clean rough surfaces and remain intact when used for scrubbing. Wipes used for clad decontamination do not need to absorb large amounts of liquid but they must be able to withstand neutron exposures, temperatures of up to several hundred degrees Celsius, and exposure to acid solutions followed by mild scrubbing. Finally wipes used for any purpose must resist chemical reactions with nitric acid that could cause issues for waste disposal such as energetic exothermic reactions or flammable gas build-up. The wipes selected for this study were ranked based on their usability (radiation tolerance, absorbency, integrity in nitric acid, and durability) as well as their chemical compatibility with nitric acid as demonstrated using several types of chemical analyses. Wipes were then ranked based on the combination of their usability and chemical compatibility scores.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Abstract for CRADA among National Energy Technology Laboratory, Research Triangle Institute, Lawrence Livermore National Laboratory, and Los Alamos National Laboratory (AGMT-0921)

Through the Carbon Capture Simulation for Industry Impact (CCSI 2 ) project, the National Energy Technology Laboratory (NETL), Lawrence Livermore National Laboratory (LLNL), and Los Alamos National Laboratory (LANL) (herein collectively “the CCSI 2 team”) will collaborate through a CRADA with the Research Triangle Institute (RTI). This collaboration will develop a modeling framework of RTI’s Non-Aqueous Solvent (NAS) process using physical and thermodynamic data and models previously developed by RTI. RTI will provide existing models and data on its NAS system to inform the model construction effort by the CCSI 2 team.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Foam and Unreacted Material Reduction in Magnesium Oxysulfate for SRPPF Waste Solidification

A magnesium oxysulfate (MOS) grout formulation has been proposed to solidify the liquid effluent from the Savannah River Plutonium Processing Facility (SRPPF) Aqueous Recovery System (ARS). This formulation uses a combination of light-burnt MgO, anhydrous MgSO 4 , and dead-burnt MgO resulting in a grout with good mixability and acceptable density. The setting time for the grout is within the operational limits of the SRPPF facility and the leachate pH is ~9.4, which is within the assumed pH range of the brine from the Waste Isolation Pilot Plant (WIPP). When first tested at the 1-gallon small-scale and 55-gallon full-scale, there was a significant foam layer that raised concerns of a nonhomogeneous final form. A nonhomogeneous mixture could have variable density throughout the waste form and therefore allow for unequal shielding. To reduce the potential for unequal shielding in the final form, a series of foam reduction tests were carried out and a final formulation of 28 wt% light burnt MgO, 10 wt% MgSO 4 , and 62 wt% dead burnt MgO was used to remove the foam in under two hours while still maintaining a mix that has an acceptable density, mix time, peak temperature, and set time.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

TALSPEAK EXTRACTION SYSTEM UNDER VARIABLE LOADING CONDITIONS - PART 2: SPECIATION STUDIES

The reported investigation was performed to gain structural information on the organic phase complex species in the Trivalent Actinide-Lanthanide Separation by Phosphorus reagent Extraction from Aqueous Komplexes (TALSPEAK) process under various loading conditions. In conjunction with the distribution studies of the TALSPEAK system constituents, presented in Part 1 of this investigation, loaded bis(2-ethylhexyl) phosphoric acid (HDEHP)/isooctane was evaluated using various spectroscopic techniques including NMR, FTIR and visible absorbance spectroscopy. Liquid-liquid distribution and vapor pressure osmometry (VPO) aggregation results correlate with observed changes in the spectroscopic signatures as a function of organic phase loading and water partitioning. Explicit FTIR spectral interpretation of the HDEHP spectra is complex due to overlapping phosphorus absorbance bands, and in this work a combination of the spectroscopic techniques was utilized to elucidate the phosphorus-lanthanide complex structure and changes in speciation due to aggregation. The results from this research will benefit an overall improved prediction of the TALSPEAK process performance under flow conditions.

99 GENERAL AND MISCELLANEOUS↗

OECD/NEA Ongoing activities related to the nuclear fuel cycle

As part of its role in encouraging international collaboration, the OECD Nuclear Energy Agency is coordinating a series of projects related to the Nuclear Fuel Cycle. The Nuclear Science Committee (NSC) Working Party on Scientific Issues of the Nuclear Fuel Cycle (WPFC) comprises five different expert groups covering all aspects of the fuel cycle from front to back-end. Activities related to fuels, materials, physics, separation chemistry, and fuel cycles scenarios are being undertaken. By publishing state-of-the-art reports and organizing workshops, the groups are able to disseminate recent research advancements to the international community. Current activities mainly focus on advanced nuclear systems, and experts are working on analyzing results and establishing challenges associated to the adoption of new materials and fuels. By comparing different codes, the Expert Group on Advanced Fuel Cycle Scenarios is aiming at gaining further understanding of the scientific issues and specific national needs associated with the implementation of advanced fuel cycles. At the back end of the fuel cycle, separation technologies (aqueous and pyrochemical processing) are being assessed. Current and future activities comprise studies on minor actinides separation and post Fukushima studies. Regular workshops are also organized to discuss recent developments on Partitioning and Transmutation. In addition, the Nuclear Development Committee (NDC) focuses on the analysis of the economics of nuclear power across the fuel cycle in the context of changes of electricity markets, social acceptance and technological advances and assesses the availability of the nuclear fuel and infrastructure required for the deployment of existing and future nuclear power. The Expert Group on the Economics of the Back End of the Nuclear Fuel Cycle (EBENFC), in particular, is looking at assessing economic and financial issues related to the long term management of spent nuclear fuel. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE nuclear separation technologies - 15148

Realizing that challenges are facing US actinide science, separations, and waste form research and development activities including meeting future manpower needs, the U.S Department of Energy (DOE), Office of Environmental Management (EM), Office of Nuclear Energy (NE), and National Nuclear Security Administration (NNSA) jointly co-sponsored a workshop entitled 'Separations Technologies: 'Going from Where We Are to Where We Want to Be' on nuclear separations technologies in Bethesda, Maryland (July 2011) to identify common needs and potential requirements in separations technologies and opportunities for program partnerships. Recognizing the different mission requirements of the sponsoring programs, participants were able to identify areas with common uses and related applications. The two follow-on technical workshops held during the Fall 2012 addressed both the chemical aspects and the physical aspects of nuclear separations. Each workshop consisted of technical discussions regarding future work relevant to DOE goals. The large number of subject matter experts from the national laboratories, academia, and headquarters staff developed a long list of existing and new technology developments in the areas of aqueous separations, pyrochemical processing, waste forms, fuel technology etc... Each of these workshops identified the current state of knowledge or technology, the resources needed, technology development opportunities, and the objectives to reach the desired end-state(s). A consolidated report with its eight appendices will be issued at the end of December 2014 summarizing the outcomes of these workshops. Some examples of these findings will be presented in our contribution. It is clear that, in the current environment of decreasing budgets it is illogical for NE, EM and NNSA to develop its own home-grown technology. Therefore, there is a strong case to be made for leveraging limited resources in order to accomplish all objectives while significantly reducing development costs. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Hybrid Encapsulated Ionic Liquids for Post-Combustion Carbon Dioxide (CO 2 ) Capture

It is increasingly clear that carbon dioxide (CO 2 ) capture and sequestration (CCS) must play a critical role in curbing worldwide CO 2 emissions to the atmosphere. Previously, we have developed ionic liquids (ILs) and phase change ionic liquids (PCILs) for post-combustion CO 2 capture. In this project, we synthesized and tested 19 ILs and PCILs and chose one of each for further development. The IL selected for further development was triethyl(octyl)phosphonium 2-cyanopyrrolide ([P 2228 ][2CNPyr]), which has the same anion but a different cation, than used in our previous work. The new cation imparts a lower viscosity than the prior cation. The PCIL selected for further development was tetraethylphosphonium benzimidazolide ([P 2222 ][BnIm]), which was developed in an Advanced Research Projects Agency-Energy (ARPA-E) project. Although we made numerous other candidates, none were better than this original PCIL. Here we showed that the CO 2 absorption by the IL and the PCIL was completely reversible, even when water was present. We determined and quantified the additional chemistry, involving the formation of bicarbonate, when water is present. The IL and PCIL were encapsulated in silicone shells using a microfluidic device. Compatibility between the IL/PCIL and the polymer, viscosity, and surface tension issues, getting sufficiently high IL/PCIL loading and leakage (likely from insufficient cross-linking), were serious challenges. Small quantities (~ 1 g) of microcapsules with good integrity of both the IL and the PCIL were produced. The CO 2 uptake by these capsules was the same as for the free IL and PCIL and the capacity of the capsules decreased only slightly even after five absorption and desorption cycles. As expected, the IL and PCIL (and subsequently the encapsulated IL and PCIL) reacted readily with SO 2 and NO, so, like aqueous amine absorbents, the CO 2 capture unit would have to be located downstream of the flue gas desulfurization and other gas treatment units. Large samples (~70 g and 100 g) of encapsulated PCIL were produced in a parallel microfluidic device and in an in-air device. These capsules were tested in a Laboratory Scale Unit (LSU) to demonstrate uptake capacity in a fluidized bed. We also used the LSU to determine recyclability and mass transfer coefficients. Unfortunately, equivalent experiments with the IL were not possible due to difficulties with producing large samples of the encapsulated IL. This IL encapsulation “scale-up” problem was not solved during the course of this project. Nonetheless, using the PCIL microcapsules we demonstrated that, as expected, the mass transfer is internally controlled. In concert with a new rate-based model of the fluidized bed, we determined that the productivity is increased by a factor of 4.75 in the microcapsule fluidized bed absorber compared to a conventional liquid-gas packed bed absorber. The initial technoeconomic model shows that the capital cost for the microcapsule IL continuous fluidized bed process is similar to that of an aqueous amine process (specifically, the Econamine FG Plus technology). However, the stripping heat requirements are about 35% less for the model IL microcapsule case compared to the monoethanolamine (MEA) case. Thus, encapsulated ILs/PCILs in a continuous fluidized bed absorber for post-combustion CO 2 capture are a significant improvement over the free IL/PCIL case and represent a major reduction in the parasitic energy requirements compared to aqueous amine process.

20 FOSSIL-FUELED POWER PLANTS↗

pH Neutralization of Aqueous Bio-Oil from Switchgrass Intermediate Pyrolysis Using Process Intensification Devices

Despite the potential carbon-neutrality of switchgrass bio-oil, its high acidity and diverse chemical composition limit its utilization. The objectives of this research are to investigate pH neutralization of bio-oil by adding various alkali solutions in a batch system and then perform neutralization using process intensification devices, including a static mixer and a centrifugal contactor. The results indicate that sodium hydroxide and potassium hydroxide are more appropriate bases for pH neutralization of bio-oil than calcium hydroxide due to the limited solubility of calcium hydroxide in aqueous bio-oil. Mass and total acid number (TAN) balances were performed for both batch and continuous-flow systems. Upon pH neutralization of bio-oil, the TAN values of the system increased after accounting the addition of alkali solution. A bio-oil heating experiment showed that the heat generated during pH neutralization did not cause a significant increase in the acidity of bio-oil. The formation of phenolic compounds during neutralization was initially suspected of increasing the system’s overall TAN value because some of these compounds (e.g., vanillic acid) act as polyprotic acids and have a stronger influence on the TAN value than monoprotic acids (e.g., acetic acid). The amount of phenolics in separated bio-oil phases, however, did not change significantly after pH neutralization. In conclusion, process intensification devices provided sufficient mixing and separation of the organic and aqueous phases, suggesting a scale-up route for the bio-oil pH neutralization process.

09 BIOMASS FUELS↗

Final Report for the Project Characterization and Valorization of Aqueous Phases Derived from Liquefaction and Upgrading of Bio-Oils

The Characterization and Valorization of Aqueous Phases Derived from Liquefaction and Upgrading of Bio-Oils project developed processes to extract value from the organics within aqueous streams derived from biomass direct liquefaction processes. The focus of the project was twofold. First, we characterized a diverse set of aqueous streams from numerous processes and feedstocks. The characterization effort served to inform this project toward development around the most prevalent compounds to maximize versatility and impact. We analyzed diverse streams from hydrothermal liquefaction of lignocellulosic, algal, and waste feedstocks; catalytic fast-pyrolysis aqueous phases; fast-pyrolysis aqueous phases; and aqueous phases produced by hydroprocessing of fast-pyrolysis bio-oil. Second, thermochemical catalytic processes were developed to convert aqueous-phase organics into useful products. These processes focused mostly on organic acids and specifically acetic acid, which was found to be ubiquitous from the characterization effort. A La x Zr y O z catalyst was discovered and developed for the ketonization of acids to ketones in the condensed aqueous phase. A dual-bed steam reforming process was developed to convert acids and other organics to hydrogen for bio-oil hydroprocessing. The dual-bed reforming process consisted of a ketonization step followed by a steam reforming step with Co as the active metal. The dual-bed process significantly reduced the rate of coke deposition versus direct steam reforming of the organic acids and beneficially produced CH 4 below the equilibrium value. Finally, we demonstrated direct conversion of aqueous-phase organics to olefins over a Zn x Zr y O z catalyst. Each thermochemical catalytic process was demonstrated with process-derived aqueous mixtures. Model compounds were used to benchmark performance and optimize conditions, but emphasis was placed on utilizing “real” aqueous streams whenever possible. A liquid-liquid extraction process using methyl tert-butyl ether as the solvent was developed to segregate dissolved inorganic species and sugars from desirable light oxygenates such as acids and alcohols. Furthermore, a carbon treatment to remove color bodies was employed after it was found the presumably heavy organic chromophore species deactivated catalysts. These economic separation processes allowed for the successful demonstration of stable catalytic processing in the condensed-phase ketonization, dual-bed reforming, and direct olefin production processes for tens to hundreds of hours, which were limited only by the quantity of feed available. Techno-economic analysis of these processes demonstrated the impact possible when capturing “waste” organics as valuable products. The condensed-phase ketonization process for converting aqueous stream acids to ketones followed by reduction and dehydration to olefins sold as a co-product resulted in the reduction of the minimum fuel selling price by about 13% compared to the anaerobic-digestion, aqueous-phase treatment base case (3.74 to 4.29/GGE). The dual-bed reforming process was commensurate in price to the anaerobic digestion base case (4.24 versus 4.29/GGE). However, the need for external natural gas to produce hydrogen for bio-oil hydroprocessing was eliminated, thereby lowering the carbon impact of the process.

09 BIOMASS FUELS↗