Results for “approach navigation” — Page 16

NASA NTRS1980

Automated optical navigation with application to Galileo

This paper presents an overview of an automated optical navigation (AON) system, a lower-cost, faster, earth-based stepping stone to onboard systems. AON provides estimation (orbit determination) and maneuver subsystems which are automatically linked to provide the fast response required by the Galileo mission, AON's first user. A real-time interactive executive schedules the subsystems to run concurrently or sequentially and enables interactive computer-graphics displays designed to speed evaluation and certification of navigation solutions. A compact trajectory integrator provides a favorable combination of speed and accuracy. Resident on a low-cost minicomputer and coded primarily in HAL/S, the NASA standard language for flight software, AON approaches a prototype for autonomous onboard navigation systems of the future.

Klumpp, A. R.↗

NASA NTRS1993

Differential Interferometry For Spacecraft Navigation

Report proposes use of differential very-long-baseline interferometry to measure accurately angular separation, viewed from Earth, of two spacecraft near another planet. One spacecraft would be in orbit around planet on trajectory already determined accurately, relative to planet, by conventional Doppler tracking. Other spacecraft would be approaching planet. Use of differential very-long-baseline interferometry "tie" between two spacecraft and previously determined "tie" between orbiter and planet increases accuracy of navigation of approaching spacecraft relative to planet.

Edwards, Charles D.↗

NASA NTRSDate not supplied

LunaNet Governance: Organizing and Planning for LunaNet Operations

LunaNet is proposed to be the lunar internet, providing services for communications, networking, position, navigation, and timing for missions in transit to and from the moon, in orbit around the moon, in transit to and from the surface, and on the surface. It is envisioned to be an open, international architecture with contributions from multiple organizations including international civil space agencies, commercial service providers, academic institutions, and other organizations. Using a combination of conventional and emerging technologies, LunaNet will create a lunar-centric network-of-networks that inherits some features of the terrestrial internet but has unique characteristics that will drive substantially different operations. Government acquisition efforts have already begun to procure commercial lunar communications and navigation services. A multi-stakeholder approach to developing the community-wide concepts of operation has been initiated by the Interagency Operations Advisory Group (IOAG), which is formed of international government space agencies, that includes other international organizations such as the Internet Society, Internet Engineering Task Force, International Committee on Global Navigation Satellite Systems, and Space Frequency Coordination Group as well as industry and academic participants. Products of the Interim Committee on LunaNet Governance will include the recommendation and definition of an initial international organizational governance structure; associated roles, responsibilities, and processes; and recommended steps to implement the governance approach. This paper will describe the progress made in developing these concepts and coordinating them among the participating organizations.

LunaNet↗

NASA NTRSDate not supplied

Vision-Based Distributed Sensing at Vertiports for Advanced Air Mobility and Urban Air Mobility Approach and Landing

Advanced Air Mobility (AAM) encompasses a broad vision for air transportation, including Urban Air Mobility (UAM) as a subset. AAM aims to create a more connected and efficient transportation network across various geographical settings. However, navigating AAM aircraft in GPS-denied or degraded environments during approach and landing is challenging. Traditional vision aids like glideslopes and localizers are limited in vertiport environments due to narrow beam constraints and reduced landing angle options. This paper addresses the need for accurate navigation solutions at vertiports by proposing a vision-based distributed sensing (VIDIS) system utilizing cameras with bundle adjustment to assist incoming AAM aircraft during approach and landing while monitoring surface movements to enhance safety and efficiency. Key focus areas for current and future vertiport developers include identifying suitable sensor types and infrastructure standards to support AAM operations and including vertiport markings as vision-based navigation aids. The proposed system offers a novel approach to overcoming navigation challenges in AAM operations, particularly in urban settings where traditional aids may be insufficient. Preliminary simulation results with distributed cameras demonstrate promising outcomes for implementing bundle adjustment techniques to enhance vision-based navigation solutions at vertiports. Generating waypoint-based trajectories via waypoint integration using explicit guidance synthesis (WINGS) creates smooth AAM trajectories for landing at vertiports by using the current waypoint's terminal conditions as the initial conditions for the next waypoint. Combining bundle adjustment's ground-based solution of vertiport features with WINGS, Coplanar Pose from Orthography and Scaling with Iterations (COPOSIT), and an extended Kalman filter (EKF) estimates the state of an incoming aircraft during approach and landing at vertiports. Future work includes testing VIDIS in a high-fidelity simulation and with real-world data.

Distributed sensing↗

NASA NTRSDate not supplied

Vision-Based Distributed Sensing at Vertiports for Advanced Air Mobility and Urban Air Mobility Approach and Landing

Advanced Air Mobility (AAM) encompasses a broad vision for air transportation, including Urban Air Mobility (UAM) as a subset. AAM aims to create a more connected and efficient transportation network across various geographical settings. However, navigating AAM aircraft in GPS-denied or degraded environments during approach and landing is challenging. Traditional vision aids like glideslopes and localizers are limited in vertiport environments due to narrow beam constraints and reduced landing angle options. This paper addresses the need for accurate navigation solutions at vertiports by proposing a vision-based distributed sensing (VIDIS) system utilizing cameras with bundle adjustment to assist incoming AAM aircraft during approach and landing while monitoring surface movements to enhance safety and efficiency. Key focus areas for current and future vertiport developers include identifying suitable sensor types and infrastructure standards to support AAM operations and including vertiport markings as vision-based navigation aids. The proposed system offers a novel approach to overcoming navigation challenges in AAM operations, particularly in urban settings where traditional aids may be insufficient. Preliminary simulation results with distributed cameras demonstrate promising outcomes for implementing bundle adjustment techniques to enhance vision-based navigation solutions at vertiports. Generating waypoint-based trajectories via waypoint integration using explicit guidance synthesis (WINGS) creates smooth AAM trajectories for landing at vertiports by using the current waypoint's terminal conditions as the initial conditions for the next waypoint. Combining bundle adjustment's ground-based solution of vertiport features with WINGS, Coplanar Pose from Orthography and Scaling with Iterations (COPOSIT), and an extended Kalman filter (EKF) estimates the state of an incoming aircraft during approach and landing at vertiports. Future work includes testing VIDIS in a high-fidelity simulation and with real-world data.

Distributed sensing↗

NASA NTRS2013

4DoF Drift Free Navigation Using Inertial Cues and Optical Flow

In this paper, we describe a novel approach in fusing optical flow with inertial cues (3D acceleration and 3D angular velocities) in order to navigate a Micro Aerial Vehicle (MAV) drift free in 4DoF and metric velocity. Our approach only requires two consecutive images with a minimum of three feature matches. It does not require any (point) map nor any type of feature history. Thus it is an inherently failsafe approach that is immune to map and feature-track failures. With these minimal requirements we show in real experiments that the system is able to navigate drift free in all angles including yaw, in one metric position axis, and in 3D metric velocity. Furthermore, it is a power-on-and-go system able to online self-calibrate the inertial biases, the visual scale and the full 6DoF extrinsic transformation parameters between camera and IMU.

reconnissance↗

NASA NTRS1989

Semi-autonomous design concepts for a Mars rover

Studies of rover mobility and surface rendezvous for a Mars Rover/Sample Return (MRSR) mission have been performed. The objective of these efforts has been to identify and address the most challenging issues and develop the most promising design options for the rover mobility and navigation subsystems. A series of trade studies culminated in three candidate design concepts: a large, but otherwise conventional four-wheel drive vehicle; a sophisticated and agile six-legged walking vehicle; and a greatly simplified legged vehicle. This paper summarizes the key design features for these three concepts. For each design, the approaches to vehicle locomotion, sensing and navigation are discussed first. Timelines are developed for the adopted concepts of operation which constrain the range of the remaining parameters. Estimates of rover mass, volume, and power are provided, and performance is projected for vehicle range, terrain traversibility and navigation accuracy.

Spiessbach, Andrew J.↗

NASA NTRS1972

Flight evaluation of three-dimensional area navigation for jet transport noise abatement.

The NASA, working with American Airlines, has completed the first phase of research to evaluate the operational feasibility of two-segment approaches for noise abatement. For these tests, area navigation was used to establish the upper glide slope and an ILS was used to establish the lower. The flight director was modified to provide command information during the entire approach. Twenty-eight pilots representing the airlines, professional pilot associations, FAA, and NASA participated. With an ILS approach for comparison, the procedure gave a noise reduction of 18 EPNdB at the outer marker and 8 EPNdB 1.1 n. mi. from touchdown.

Denery, D. G.↗

NASA NTRS2013

Coarse-Grain Bandwidth Estimation Scheme for Large-Scale Network

A large-scale network that supports a large number of users can have an aggregate data rate of hundreds of Mbps at any time. High-fidelity simulation of a large-scale network might be too complicated and memory-intensive for typical commercial-off-the-shelf (COTS) tools. Unlike a large commercial wide-area-network (WAN) that shares diverse network resources among diverse users and has a complex topology that requires routing mechanism and flow control, the ground communication links of a space network operate under the assumption of a guaranteed dedicated bandwidth allocation between specific sparse endpoints in a star-like topology. This work solved the network design problem of estimating the bandwidths of a ground network architecture option that offer different service classes to meet the latency requirements of different user data types. In this work, a top-down analysis and simulation approach was created to size the bandwidths of a store-and-forward network for a given network topology, a mission traffic scenario, and a set of data types with different latency requirements. These techniques were used to estimate the WAN bandwidths of the ground links for different architecture options of the proposed Integrated Space Communication and Navigation (SCaN) Network. A new analytical approach, called the "leveling scheme," was developed to model the store-and-forward mechanism of the network data flow. The term "leveling" refers to the spreading of data across a longer time horizon without violating the corresponding latency requirement of the data type. Two versions of the leveling scheme were developed: 1. A straightforward version that simply spreads the data of each data type across the time horizon and doesn't take into account the interactions among data types within a pass, or between data types across overlapping passes at a network node, and is inherently sub-optimal. 2. Two-state Markov leveling scheme that takes into account the second order behavior of the store-and-forward mechanism, and the interactions among data types within a pass. The novelty of this approach lies in the modeling of the store-and-forward mechanism of each network node. The term store-and-forward refers to the data traffic regulation technique in which data is sent to an intermediate network node where they are temporarily stored and sent at a later time to the destination node or to another intermediate node. Store-and-forward can be applied to both space-based networks that have intermittent connectivity, and ground-based networks with deterministic connectivity. For groundbased networks, the store-and-forward mechanism is used to regulate the network data flow and link resource utilization such that the user data types can be delivered to their destination nodes without violating their respective latency requirements.

Cheung, Kar-Ming↗

NASA NTRS1972

Estimating trajectory correction requirements for multiple outer planet missions.

General approach to the problem of estimating trajectory correction requirements for multiple outer planet flyby missions when the navigation system uses onboard optical measurements made during approach to each target planet to complement the ground-based radio measurements. The accuracy and reliability of the onboard measurement system plays a critical role in sizing the trajectory correction capability required. An illustration of the combined use of radio and optical measurements is provided for the particular case of a Jupiter-Uranus-Neptune mission. Use of the statistical technique developed for computing the trajectory correction margin required to account for uncertainties in subsystem performance, permits trajectory correction savings of 100 to 20 m/sec over 'worst case' designs. This represents weight savings of about 50% of the science payload. For the example case trajectory correction requirements are estimated for two candidate optical systems and the radio alone case. The use of onboard measurements allows a trajectory correction savings of approximately 140 m/sec.

Friedman, L. D.↗

NASA NTRS2016

Dawn Safing Approach to Ceres Re-Design

In mid-2014 the Dawn team finalized preparations for the spacecraft’s approach to Ceres. The design was the product of careful planning that began several years in advance, when the spacecraft left Vesta in September 2012. However, a few months prior to the anticipated start of approach, the spacecraft entered a safe mode. While temporary loss of thrust for ion propulsion missions is usually not mission-critical, it still presents many challenges. The safing event occurred at a time when thrusting to match Ceres’ orbital velocity was most effective, which meant the spacecraft must fly past Ceres before capturing into orbit. The new approach geometry changed the team’s strategy for navigating the spacecraft safely into orbit around Ceres with optical data. In this paper we describe the challenges of navigating the Dawn spacecraft into orbit around Ceres, including the safing event and re-design of the approach architecture.

Grebow, Daniel J.↗

NASA NTRS2016

Dawn Safing Approach to Ceres Re-Design

In mid-2014 the Dawn team finalized preparations for the spacecraft’s approach to Ceres. The design was the product of careful planning that began several years in advance, when the spacecraft left Vesta in September 2012. However, a few months prior to the anticipated start of approach, the spacecraft entered a safe mode. While temporary loss of thrust for ion propulsion missions is usually not mission-critical, it still presents many challenges. The safing event occurred at a time when thrusting to match Ceres’ orbital velocity was most effective, which meant the spacecraft must fly past Ceres before capturing into orbit. The new approach geometry changed the team’s strategy for navigating the spacecraft safely into orbit around Ceres with optical data. In this paper we describe the challenges of navigating the Dawn spacecraft into orbit around Ceres, including the safing event and re-design of the approach architecture.

Grebow, Dan↗

NASA NTRS1998

An Innovative Method for Low Cost, Autonomous Navigation for Low Earth Orbit Satellites

An innovative approach to autonomous attitude, trajectory, and rate estimation is presented for low earth orbit (LEO) satellites which relies on magnetometers and sun sensors. These two sensors are reliable, inexpensive, and are used routinely in LEO missions for attitude determination and control. An extended Kalman filter (EKF) is developed from two existing systems, one which uses an EKF to estimate attitude and trajectory using magnetometer and gyro data and a second pseudo-linear filter which estimates rotation rate using magnetometer and sun sensor data. The theoretical background of the combined system is presented along with test results from noisy, simulated sensor data.

Deutschmann, Julie↗

NASA NTRS1976

Simulation analysis of a microcomputer-based, low-cost Omega navigation system

The current status of research on a proposed micro-computer-based, low-cost Omega Navigation System (ONS) is described. The design approach emphasizes minimum hardware, maximum software, and the use of a low-cost, commercially-available microcomputer. Currently under investigation is the implementation of a low-cost navigation processor and its interface with an omega sensor to complete the hardware-based ONS. Sensor processor functions are simulated to determine how many of the sensor processor functions can be handled by innovative software. An input data base of live Omega ground and flight test data was created. The Omega sensor and microcomputer interface modules used to collect the data are functionally described. Automatic synchronization to the Omega transmission pattern is described as an example of the algorithms developed using this data base.

Lilley, R. W.↗

NASA NTRS1998

A Self-Tuning Kalman Filter for Autonomous Spacecraft Navigation

Most navigation systems currently operated by NASA are ground-based, and require extensive support to produce accurate results. Recently developed systems that use Kalman Filter and Global Positioning System (GPS) data for orbit determination greatly reduce dependency on ground support, and have potential to provide significant economies for NASA spacecraft navigation. Current techniques of Kalman filtering, however, still rely on manual tuning from analysts, and cannot help in optimizing autonomy without compromising accuracy and performance. This paper presents an approach to produce a high accuracy autonomous navigation system fully integrated with the flight system. The resulting system performs real-time state estimation by using an Extended Kalman Filter (EKF) implemented with high-fidelity state dynamics model, as does the GPS Enhanced Orbit Determination Experiment (GEODE) system developed by the NASA Goddard Space Flight Center. Augmented to the EKF is a sophisticated neural-fuzzy system, which combines the explicit knowledge representation of fuzzy logic with the learning power of neural networks. The fuzzy-neural system performs most of the self-tuning capability and helps the navigation system recover from estimation errors. The core requirement is a method of state estimation that handles uncertainties robustly, capable of identifying estimation problems, flexible enough to make decisions and adjustments to recover from these problems, and compact enough to run on flight hardware. The resulting system can be extended to support geosynchronous spacecraft and high-eccentricity orbits. Mathematical methodology, systems and operations concepts, and implementation of a system prototype are presented in this paper. Results from the use of the prototype to evaluate optimal control algorithms implemented are discussed. Test data and major control issues (e.g., how to define specific roles for fuzzy logic to support the self-learning capability) are also discussed. In addition, architecture of a complete end-to-end candidate flight system that provides navigation with highly autonomous control using data from GPS is presented.

Truong, Son H.↗

NASA NTRS1993

Multi-viewpoint clustering analysis

In this paper, we address the feasibility of partitioning rule-based systems into a number of meaningful units to enhance the comprehensibility, maintainability and reliability of expert systems software. Preliminary results have shown that no single structuring principle or abstraction hierarchy is sufficient to understand complex knowledge bases. We therefore propose the Multi View Point - Clustering Analysis (MVP-CA) methodology to provide multiple views of the same expert system. We present the results of using this approach to partition a deployed knowledge-based system that navigates the Space Shuttle's entry. We also discuss the impact of this approach on verification and validation of knowledge-based systems.

Mehrotra, Mala↗

NASA NTRS1986

Approach strategy for the rendezvous with comet Tempel 2

The methods used to locate the comet nucleus and safety navigate through the debris surrounding the comet are discussed. The approach to the nucleus is in two parts: a high-speed (1.9 km/s) leg which ends with the spacecraft 200,000 km sunward of the nucleus, and a low-speed (25 m/s) leg which traverses the 200,000 km to the nucleus. The nucleus will be recovered by the narrow-angle camera 30 days prior to the completion of the high-speed inbound leg. The debris density is low enough to permit the safe passage of the spacecraft through the surrounding cometary debris.

Kakuda, R. Y.↗

NASA NTRSDate not supplied

Artemis Navigation Architecture: Early Capabilities and Long Term Evolvability and Evolution

With the awarding of multiple contracts within the Artemis program and building on the success of Artemis I, NASA is investing in and demonstrating the vehicle capabilities necessary for a return to human crewed Lunar Missions. To support activities on the lunar surface, NASA is also assessing architecture options and approaches to enable high precision in-situ navigation within the lunar sphere of influence. These capabilities build on decades of research and advancements within the field, building and evolving the techniques used during Apollo. To support inter-operability and broad application within its elements, NASA conducted a trade on Orbital and Surface Lunar Architecture for PNT. Time-defined mission requirements were captured across elements to inform a phased approach and deployment of needed capability. The architecture must also address unique aspects of the South Pole lunar environments, specifically in terms of harsh lighting and hazardous terrain. To inform the study, documentation of primary users, operational concepts of operations, driving scenarios, and mission needs were used to define performance constraints and phasing. Multiple technologies were assessed in terms of maturity, applicability, and performance to meet the primary user needs forecast. The results of this study support the utilization of in-situ orbital infrastructure to provide a back-bone for navigation and emphasize the need for a common Lunar Reference System and Lunar Time Reference. This deployment can ensure compatibility and enable a high-accuracy in-situ capability. This provides further justification for the capabilities being invested in and deployed by NASA and other international agencies. In addition to including advancements in terrestrial surface navigation, NASA is also applying lessons learned and innovation in the contractual approach to the individual elements by means of a services-based contract mechanism. This impacts the navigation architecture heavily in terms of government and provider roles, in terms of levels of implementation, interoperability, and verification. These distinctions in roles provide constraints to the architecture approach in terms of implementation and integration and will be discussed. The development, use, and mandate of interoperability standards are being deployed to support cross-element compatibility. This paper will provide a summary of the NASA Lunar Navigation needs across its various elements and the proposed deployment of an integrated navigation architecture to support early mission needs with inherent extensibility towards the future.

Evan Anzalone↗