Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “analytic continuation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Distributed reacceleration of cosmic rays

We develop a model in which cosmic rays, in addition to their initial acceleration by a strong shock, are continuously reaccelerated (e.g., by weak shocks) while propagating through the galaxy. The equations describing this acceleration scheme are solved analytically (approximating ionization losses by a cutoff) and numerically. Solutions for the spectra of primary and secondary cosmic rays are given in a closed analytic form, and they allow a rapid search in parameter space for viable propagation models with distributed reacceleration included. The observed boron-to-carbon ratio can be reproduced by the reacceleration theory over a range of escape parameters, some of them quite different from the standard "leaky box" model. It is also shown that even a very modest amount of reacceleration by strong shocks causes the boron-to carbon ratio to level off at sufficiently high energies, and this effect may be observed in the CRNE data. Several other curiosities in the data may be explained naturally if a modest amount of distributed reacceleration is invoked, including (a) the apparent truncation at low energy in the otherwise exponential pathlength distribution associated with the leaky box model, (b) the sub-iron isotopic anomalies and other effects noted by Silberberg et al., and (c) the discrepancy between the reported 10Be lifetime and the lifetime of cosmic rays in the dense strata of the galactic disk.

NASA Discipline Radiation Health↗
NASA NTRS2009

Johnson Space Center's Risk and Reliability Analysis Group 2008 Annual Report

The Johnson Space Center (JSC) Safety & Mission Assurance (S&MA) Directorate s Risk and Reliability Analysis Group provides both mathematical and engineering analysis expertise in the areas of Probabilistic Risk Assessment (PRA), Reliability and Maintainability (R&M) analysis, and data collection and analysis. The fundamental goal of this group is to provide National Aeronautics and Space Administration (NASA) decisionmakers with the necessary information to make informed decisions when evaluating personnel, flight hardware, and public safety concerns associated with current operating systems as well as with any future systems. The Analysis Group includes a staff of statistical and reliability experts with valuable backgrounds in the statistical, reliability, and engineering fields. This group includes JSC S&MA Analysis Branch personnel as well as S&MA support services contractors, such as Science Applications International Corporation (SAIC) and SoHaR. The Analysis Group s experience base includes nuclear power (both commercial and navy), manufacturing, Department of Defense, chemical, and shipping industries, as well as significant aerospace experience specifically in the Shuttle, International Space Station (ISS), and Constellation Programs. The Analysis Group partners with project and program offices, other NASA centers, NASA contractors, and universities to provide additional resources or information to the group when performing various analysis tasks. The JSC S&MA Analysis Group is recognized as a leader in risk and reliability analysis within the NASA community. Therefore, the Analysis Group is in high demand to help the Space Shuttle Program (SSP) continue to fly safely, assist in designing the next generation spacecraft for the Constellation Program (CxP), and promote advanced analytical techniques. The Analysis Section s tasks include teaching classes and instituting personnel qualification processes to enhance the professional abilities of our analysts as well as performing major probabilistic assessments used to support flight rationale and help establish program requirements. During 2008, the Analysis Group performed more than 70 assessments. Although all these assessments were important, some were instrumental in the decisionmaking processes for the Shuttle and Constellation Programs. Two of the more significant tasks were the Space Transportation System (STS)-122 Low Level Cutoff PRA for the SSP and the Orion Pad Abort One (PA-1) PRA for the CxP. These two activities, along with the numerous other tasks the Analysis Group performed in 2008, are summarized in this report. This report also highlights several ongoing and upcoming efforts to provide crucial statistical and probabilistic assessments, such as the Extravehicular Activity (EVA) PRA for the Hubble Space Telescope service mission and the first fully integrated PRAs for the CxP's Lunar Sortie and ISS missions.

Valentine, Mark↗
NASA NTRS2009

Method and system to perform energy-extraction based active noise control

A method to provide active noise control to reduce noise and vibration in reverberant acoustic enclosures such as aircraft, vehicles, appliances, instruments, industrial equipment and the like is presented. A continuous-time multi-input multi-output (MIMO) state space mathematical model of the plant is obtained via analytical modeling and system identification. Compensation is designed to render the mathematical model passive in the sense of mathematical system theory. The compensated system is checked to ensure robustness of the passive property of the plant. The check ensures that the passivity is preserved if the mathematical model parameters are perturbed from nominal values. A passivity-based controller is designed and verified using numerical simulations and then tested. The controller is designed so that the resulting closed-loop response shows the desired noise reduction.

Kelkar, Atul↗
NASA NTRS2016

Big Data Analytics and Machine Intelligence Capability Development at NASA Langley Research Center: Strategy, Roadmap, and Progress

In 2014, a team of researchers, engineers and information technology specialists at NASA Langley Research Center developed a Big Data Analytics and Machine Intelligence Strategy and Roadmap as part of Langley's Comprehensive Digital Transformation Initiative, with the goal of identifying the goals, objectives, initiatives, and recommendations need to develop near-, mid- and long-term capabilities for data analytics and machine intelligence in aerospace domains. Since that time, significant progress has been made in developing pilots and projects in several research, engineering, and scientific domains by following the original strategy of collaboration between mission support organizations, mission organizations, and external partners from universities and industry. This report summarizes the work to date in Data Intensive Scientific Discovery, Deep Content Analytics, and Deep Q&A projects, as well as the progress made in collaboration, outreach, and education. Recommendations for continuing this success into future phases of the initiative are also made.

Ambur, Manjula Y.↗
NASA NTRS2023

Compact Lightweight Aerial Sensor System (CLASSy)

In the wake of increasingly intense wildfires, innovative solutions are imperative to enhance wildfire mitigation strategies. Current technological integrations have hit a communicative limit. Between limited flight time, computational expenses as well as financial expenses, there is a hole in the market for an effective, low-tech, and disposable solution. The Compact Lightweight Aerial Sensor System (CLASSy) is designed to revolutionize active disaster operations through comprehensive decision support. CLASSy consists of a lightweight launch mechanism and a flight body equipped with a sensor package and parachute. The assembly integrates sensor networks with data analytics to provide real-time, high-resolution information to incident commanders, directly facilitating decision-making and resource allocation. Infrared imagery and temperature differentials are processed and analyzed throughout flight, offering valuable insights into fire behavior, hotspot detection, and fire spread trajectories. CLASSy is intended to meet a variety of natural disaster mitigation needs through its variable launch height and disposability. CLASSy’s goal is to assist wildfire fighting without taking up any human or material resources. As a result, CLASSy is as lightweight as possible, easily expendable, inexpensive to manufacture, and only requires one operator for effective use. CLASSy’s integrated sensor suite, real-time analytics, and closed loop active communications empower firefighting teams to proactively address wildfire challenges. As the frequency of wildfires continues to rise, technological innovations like CLASSy are crucial to effective wildfire management systems.

Kyleigh Anderson↗
NASA NTRS1976

Deviation from a Maxwellian velocity distribution in regions of interstellar molecular hydrogen

The deviation from a Maxwellian velocity distribution caused by excitation of the J = 2 rotational level of parahydrogen (followed by radiative decay) in a molecular hydrogen gas is investigated. It is noted that inelastic collisions deplete the high-velocity tail of the distribution, while elastic collisions tend to refill it; the resulting steady-state distribution has a small depletion in the tail which slightly reduces the cooling rate of the gas. The elastic-collision transport is approximated by a continuous process, a simplified expression is obtained for the inelastic-collision operator, and the Boltzmann equation is then solved analytically. A correction to the inelastic-collision rate is evaluated, and it is found that the relative magnitude of the effect of tail depletion on the inelastic-collision rate is strongly temperature-dependent. The critical molecular density above which the J = 2 level deexcites by superelastic collisions is shown to be a weak function of temperature.

Gould, R. J.↗
NASA NTRS1983

Space Shuttle propulsion parameter estimation using optimal estimation techniques

This fourth monthly progress report again contains corrections and additions to the previously submitted reports. The additions include a simplified SRB model that is directly incorporated into the estimation algorithm and provides the required partial derivatives. The resulting partial derivatives are analytical rather than numerical as would be the case using the SOBER routines. The filter and smoother routine developments have continued. These routines are being checked out.

Source record↗
NASA NTRS1992

Orbital motion under continuous tangential thrust

The effect of continuous tangential thrust on the orbital motion and mass loss of a vehicle initially in a circular orbit is investigated analytically. It is shown that, for a thrust-to-weight ratio of greater than 0.16175, escape speed will eventually be reached along an unwinding spiral trajectory. For lower thrust-to-weight ratios, escape speed is never attained, and the flight path oscillates around a logarithmic spiral trajectory. Formulas are obtained for the approximate orbital motion and time of flight along each type of trajectory and for mass loss due to expenditure of rocket propellant.

Boltz, Frederick W.↗
NASA NTRS1994

Prediction of thermal and mechanical stress-strain responses of TMC's subjected to complex TMF histories

This paper presents an experimental and analytical evaluation of cross-plied laminates of Ti-15V-3Cr-3Al-3Sn (Ti-15-3) matrix reinforced with continuous silicon-carbide fibers (SCS-6) subjected to a complex TMF loading profile. Thermomechanical fatigue test techniques were developed to conduct a simulation of a generic hypersonic flight profile. A micromechanical analysis was used. The analysis predicts the stress-strain response of the laminate and of the constituents in each ply during thermal and mechanical cycling by using only constituent properties as input. The fiber was modeled as elastic with transverse orthotropic and temperature-dependent properties. The matrix was modeled using a thermoviscoplastic constitutive relation. The fiber transverse modulus was reduced in the analysis to simulate the fiber-matrix interface failures. Excellent correlation was found between measured and predicted laminate stress-strain response due to generic hypersonic flight profile when fiber debonding was modeled.

Johnson, W. S.↗
NASA NTRS1996

A Thermostructural Analysis of a Diboride Composite Leading Edge

In an effort to support the design of zirconium diboride composite leading edges for hypersonic vehicles, a finite element model (FEM) of a prototype leading edge was created and finite element analysis (FEA) was employed to assess its thermal and structural response to aerothermal boundary conditions. Unidirectional material properties for the structural components of the leading edge, a continuous fiber reinforced diboride composite, were computed with COSTAR. These properties agree well with those experimentally measured. To verify the analytical approach taken with COSMOS/M, an independent FEA of one of the leading edge assembly components was also done with COSTAR. Good agreement was obtained between the two codes. Both showed that a unidirectional lay-up had the best margin of safety for a simple loading case. Both located the maximum stress in the same region and ply. The magnitudes agreed within 4 percent. Trajectory based aerothermal heating was then applied to the leading edge assembly FEM created with COSMOS/M to determine steady state temperature response, displacement, stresses, and contact forces due to thermal expansion and thermal strains. Results show that the leading edge stagnation line temperature reached 4700 F. The maximum computed failure index for the laminated composite components peaks at 4.2, and is located at the bolt flange in layer 2 of the side bracket. The temperature gradient in the tip causes a compressive stress of 279 ksi along its width and substantial tensile stresses within its depth.

Kowalski, Tom↗
NASA NTRS1988

Continuous Optimization on Constraint Manifolds

This paper demonstrates continuous optimization on the differentiable manifold formed by continuous constraint functions. The first order tensor geodesic differential equation is solved on the manifold in both numerical and closed analytic form for simple nonlinear programs. Advantages and disadvantages with respect to conventional optimization techniques are discussed.

Dean, Edwin B.↗
NASA NTRS2009

The Capillary Flow Experiments Aboard the International Space Station: Increments 9-15

This report provides a summary of the experimental, analytical, and numerical results of the Capillary Flow Experiment (CFE) performed aboard the International Space Station (ISS). The experiments were conducted in space beginning with Increment 9 through Increment 16, beginning August 2004 and ending December 2007. Both primary and extra science experiments were conducted during 19 operations performed by 7 astronauts including: M. Fincke, W. McArthur, J. Williams, S. Williams, M. Lopez-Alegria, C. Anderson, and P. Whitson. CFE consists of 6 approximately 1 to 2 kg handheld experiment units designed to investigate a selection of capillary phenomena of fundamental and applied importance, such as large length scale contact line dynamics (CFE-Contact Line), critical wetting in discontinuous structures (CFE-Vane Gap), and capillary flows and passive phase separations in complex containers (CFE-Interior Corner Flow). Highly quantitative video from the simply performed flight experiments provide data helpful in benchmarking numerical methods, confirming theoretical models, and guiding new model development. In an extensive executive summary, a brief history of the experiment is reviewed before introducing the science investigated. A selection of experimental results and comparisons with both analytic and numerical predictions is given. The subsequent chapters provide additional details of the experimental and analytical methods developed and employed. These include current presentations of the state of the data reduction which we anticipate will continue throughout the year and culminate in several more publications. An extensive appendix is used to provide support material such as an experiment history, dissemination items to date (CFE publication, etc.), detailed design drawings, and crew procedures. Despite the simple nature of the experiments and procedures, many of the experimental results may be practically employed to enhance the design of spacecraft engineering systems involving capillary interface dynamics.

Jenson, Ryan M.↗
NASA NTRS1993

A global analytical representation of the magnetic field produced by the region 2 Birkeland currents and the partial ring current

A quantitative model is developed of the magnetic field produced by the electric current system of region 2 Birkeland currents, closed via the partial ring current. The distribution of j-perpendicular is computed from a given axially asymmetric spatial distribution of hot isotropic magnetospheric plasma over an infinitely thin L shell in an axisymmetric purely dipolar geomagnetic field, while the field-aligned current density is found from the continuity of the net electric current. The magnetic field distribution is derived by a Biot-Savart integral over the electric current system. An assumed cosine dependence of the plasma pressure on local time makes it possible to reduce the problem of analytical representation of the B field to two dimensions. The obtained numerical fits for the partial ring current/region 2 Birkeland current magnetic field are relatively simple, continuous, and valid throughout the whole extraterrestrial space from ionospheric heights up to tens of earth radii.

Tsyganenko, N. A.↗
NASA NTRS2018

A Mission-Enabling UV Laser for Mass Spectrometry (UVMS) with Continuously Selectable Output for In Situ Planetary Exploration

Ultra-compact, ns-class spaceflight-compatible UV lasers are finding increasing application in laser desorption, excitation, and ionization analytical applications on planetary missions, such as the detection and characterization of potential molecular biosignatures on Mars or icy moon surfaces. A short pulsed, solid state, UV laser is under development with selectable pulse energy capabilities for optimized sample ion production at a planetary surface.

Coyle, D. Barry↗
NASA NTRS1985

Reexamination of Cumulative Fatigue Damage Laws

Treatment of accumulated fatigue damage in materials and structures subjected to a history of nonsimple repetitive loadings has received a large amount of attention in recent years. A method used for the treatment of complex loading is known as linear damage rule. It was recognized that, this method could result in unconservative predictions of material and structural behavior. An intense flurry of activity followed in the pursuit of alternative methods of analysis that would predict behavior more accurately. So many methods were introduced that it became necessary periodically to prepare review papers placing all the new methods into perspective. The current integrated view regarding the state of the art as it applies to this effort is discussed. The more recently proposed cumulative damage life prediction methods are reviewed. The double linear damage rule (DLDR), which has evolved over the past 20 years, is reexamined with the intent of improving its accuracy and applicability to engineering problems. Modifications are introduced to the analytical formulation to achieve greater compatibility between the DLDR and the so-called damage curve approach, which is an alternative continuous representation of the DLDR.

Halford, G. R.↗
NASA NTRS1988

A unidimensional model of comet ionosphere structure

The one-dimensional continuity and momentum equations for the plasma formed in the expanding coma of a comet near the sun are studied. An analytic expression for the magnetic field configuration in the presence of outflow, photoionization, dissociative recombination, plasma fluid pressure, and friction between the ions and neutrals is obtained. It is suggested that for a Halley-type comet there will be a region sunward of the nucleus from which the magnetic field is excluded, consistent with Giotto observations. Calculations have been performed for Halley and Giacobini-Zinner type comets, and in the field-free regions it is shown that the dominant terms in the momentum equation balancing the magnetic pressure gradient are the ion neutral friction and the net mass loading momentum gain.

Eviatar, Aharon↗
NASA NTRS2004

Advances in Scientific Balloon Thermal Modeling

The National Aeronautics and Space Administration's Balloon Program office has long acknowledged that the accurate modeling of balloon performance and flight prediction is dependant on how well the balloon is thermally modeled. This ongoing effort is focused on developing accurate balloon thermal models that can be used to quickly predict balloon temperatures and balloon performance. The ability to model parametric changes is also a driver for this effort. This paper will present the most recent advances made in this area. This research effort continues to utilize the "Thrmal Desktop" addition to AUTO CAD for the modeling. Recent advances have been made by using this analytical tool. A number of analyses have been completed to test the applicability of this tool to the problem with very positive results. Progressively detailed models have been developed to explore the capabilities of the tool as well as to provide guidance in model formulation. A number of parametric studies have been completed. These studies have varied the shape of the structure, material properties, environmental inputs, and model geometry. These studies have concentrated on spherical "proxy models" for the initial development stages and then to transition to the natural shaped zero pressure and super pressure balloons. An assessment of required model resolution has also been determined. Model solutions have been cross checked with known solutions via hand calculations. The comparison of these cases will also be presented. One goal is to develop analysis guidelines and an approach for modeling balloons for both simple first order estimates and detailed full models. This papa presents the step by step advances made as part of this effort, capabilities, limitations, and the lessons learned. Also presented are the plans for further thermal modeling work.

Bohaboj, T.↗
NASA NTRSDate not supplied

Dry Saliva Development-Artemis

Prior to the deployment of prolonged deep space missions which may carry increased crew health risks, it is essential to determine the effect that missions beyond the Van Allen Belt will have on physiology. Historically the National Aeronautics and Space Administration (NASA), Human Research Program (HRP) has developed, conducted, and delivered research findings and countermeasures that will maintain the health and safety of crews aboard the International Space Station (ISS) in anticipation of future exploration class missions. To support these objectives, research operations on ISS typically include the collection and storage of human physiological samples and their return to Earth for analysis. Transition to Gateway and Artemis lunar exploration will limit the available up mass and biosample return capability resulting in new challenges to monitor crew health during the mission. The Artemis lunar missions provide a perfect opportunity to assess new technology that could support crew biosample return that is compatible with the severe operational constraints of Artemis mission design. Dried biosample chemistry analysis is a potential technology that can enable the collection of samples and tracking of crew health during these exploration class missions. The development and implementation of dried biosample chemistry technology for tracking immune health, viral reactivation and hormone fluctuations provide a simple alternative strategy for sample collection and sample return (light weight non-conditioned stowage option) for the continuation of human research during Artemis missions. Saliva is established as an informative biosample that has both its own unique available analytes as well as others that are also present in blood. Saliva is already routinely collected from ISS astronauts for the detection of stress hormones and latent virus DNA. The ‘Dry Saliva’ book sample collection/storage protocol, already successfully deployed to ISS, represents a perfect method for collecting biosamples from Gateway and Artemis astronauts because it requires a simple, non-invasive sample collection protocol, minimum volume, and uses non-conditioned storage. We are currently conducting an expanded stability study of the dry saliva analyte platform to include additional stress hormones, cytokines, antimicrobial proteins, and latent virus DNA as well as other markers of immunity and inflammation. Validation testing on parabolic flight will establish collection methods for saliva and blood to dry sampling substrates to finalize the collection protocols for flight. For the new expanded analyte stability study, a short-term stability study with time points out to 14 days has been completed with analysis underway to determine whether additional analytes could be recovered, as well as assessing the best storage conditions for the samples collected. In parallel, a long-term stability study is being conducted out to 1 year to improve the stability of some unstable analytes. To this end, the NASA Johnson Space Center’s Immunology/Virology lab is currently finalizing the saliva dry chemistry platform, including assay compatibility and stability studies. This technology is approved to be implemented, as part of the ‘Biomarkers’ study, during Artemis II through Artemis IV lunar missions.

Mayra Nelman-Gonzalez↗