Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “additive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

A coupled fluid-mechanical workflow to simulate the directed energy deposition additive manufacturing process

Simulation of additive manufacturing processes can provide essential insight into material behavior, residual stress, and ultimately, the performance of additively manufactured parts. In this work, we describe a new simulation based workflow utilizing both solid mechanics and fluid mechanics based formulations within the finite element software package SIERRA (Sierra Solid Mechanics Team in Sierra/Solid Mechanics 4.52 User’s Guide SAND2019-2715. Technical report, Sandia National Laboratories, 2011) to enable integrated simulations of directed energy deposition (DED) additive manufacturing processes. In this methodology, a high-fidelity fluid mechanics based model of additive manufacturing is employed as the first step in a simulation workflow. This fluid model uses a level set field to track the location of the boundary between the solid material and background gas and precisely predicts temperatures and material deposition shapes from additive manufacturing process parameters. Next, the resulting deposition shape and temperature field from the fluid model are then mapped into a solid mechanics formulation to provide a more accurate surface topology for radiation and convection boundary conditions and a prescribed temperature field. Solid mechanics simulations are then conducted to predict the evolution of material stresses and microstructure within a part. By combining thermal history and deposition shape from fluid mechanics with residual stress and material property evolutions from solid mechanics, additional fidelity and precision are incorporated into additive manufacturing process simulations providing new insight into complex DED builds.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Effects of Co{sub 3}O{sub 4} Addition on Friction and Dry Sliding Wear Characteristics of 8 mol% Yttria-Stabilized Cubic Zirconia

The aim of the present study was to investigate the influence of Co{sub 3}O{sub 4} additive on the microstructure, wear, and tribological properties of 8 mol% yttria-stabilized cubic zirconia (8YSZ) using a pin-on-disk tribometer, surface profilometer, hardness tester, and a scanning electron microscopy system. Specimens were produced by doping 1-15 wt.% Co{sub 3}O{sub 4} in 8YSZ using a colloidal process, sintering at 1500 °C for 1 h, and subsequent annealing at 1500 °C for 10 and 50 h. Microstructural analysis showed that Co{sub 3}O{sub 4} dissolved partially in 8YSZ, with the undissolved Co{sub 3}O{sub 4} precipitating as a secondary phase at the grain boundaries. Further, the addition of Co{sub 3}O{sub 4} enhanced the grain size. Wear tests were carried out using an Al{sub 2}O{sub 3} ball as the counterface against ceramic disk under dry sliding friction conditions at room temperature (24 °C). The wear volume of 8YSZ decreased from 0.30 to 0.11 mm{sup 3} as a result of the addition of 15 wt.% Co{sub 3}O{sub 4}. Additionally, friction coefficient of the 8YSZ significantly reduced from 0.55 to 0.17 at the beginning stage of the sliding after the addition of 15 wt.% Co{sub 3}O{sub 4}. This was because Co{sub 3}O{sub 4} creates a thin lubricating layer on the friction surface. In addition, the undoped and Co{sub 3}O{sub 4}-doped 8YSZ specimens exhibited abrasive wear under the dry sliding friction conditions, owing to the formation and propagation of microcracks, which resulted in the removal of material from the surface. The specific wear rate of 8YSZ decreased with increasing the Co{sub 3}O{sub 4} content. Thus, the addition of Co{sub 3}O{sub 4} to 8YSZ improves its wear resistance and surface topography.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effect of bacterial cell addition on Fe(III) reduction and soil organic matter transformation in a farmland soil

The coupled biogeochemical processes of Fe(III) reduction and organic matter transformation profoundly impact terrestrial carbon cycling. However, little is known about the microbial role in soil organic matter (SOM) transformation during Fe(III) bio-reduction. Here we investigated the bio-reduction behavior of a black farmland soil and corresponding SOM transformation under circumneutral and anoxic conditions. A model dissimilatory Fe reducing bacterium, Geobacter sulfurreducens, was added in either live or dead form in order to enhance Fe(III) reduction in soil and to evaluate the accompanying transformation of SOM. The progress of Fe reduction was monitored and SOM transformation was characterized by various spectroscopy methods. Results showed that addition of either dead or live G. sulfurreducens cells increased the Fe(III) reduction rate and extent. Without cell addition, SOM transformation was insignificant within 13 days of incubation, only with some consumption of aliphatic/protein compounds, apparently due to their higher bio-degradability. Addition of dead or live cells resulted in more drastic SOM transformation, but through different mechanisms. With dead cell amendment, cell necromass and debris stimulated the activity of indigenous soil microbes by serving as extra carbon/energy sources. During Fe(III) reduction, the aliphatic/protein compounds were preferentially consumed by indigenous microbial communities, similar to the treatment without cell addition but with a greater extent of consumption. In comparison, addition of live G. sulfurreducens cells stimulated degradation of less bioavailable compounds, including more saturated and higher molecular weight SOM. It is possible that fast depletion of labile SOM by live G. sulfurreducens cells favored utilization of less bioavailable molecules (such as those with more aromatic structures) by the originally dormant species in native microbial community, suggesting an active role of live Fe(III)-reducing bacteria in affecting SOM transformation. In addition, fast assimilation of microbial related carbon, such as aromatic proteins and microbial byproducts, into SOM pools was also observed. Overall, our results suggest that addition of Fe(III)-reducing bacteria to a native soil can enhance Fe(III) reduction and accelerate the turnover of SOM through various mechanisms. The study provides new insights into coupled Fe(III) reduction and SOM transformation, as well as the “priming effect” of SOM using microbial cells as substrate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Facile in Situ Syntheses of Cathode Protective Electrolyte Additives for High Energy Density Li-Ion Cells

Increasing the energy densities of Li-ion batteries necessitates operation of layered lithiated oxide cathodes at potentials exceeding 4 V vs Li/Li + . When continually exposed to such high potentials, these materials gradually deteriorate unless protected by sacrificial agents called electrolyte additives. During the formation cycles, these electrolyte additives decompose on the electrodes forming thin protective layers of insoluble products impeding further deleterious reactions. Some of these electrolyte additives spontaneously react when introduced into the electrolyte to yield specific surface-modifying products that alone protect the cathode; in other words, the nominal additive is the precursor and the secondary product is the protective agent. Guided by this insight, we used molecular engineering to obtain such surface-active secondary products in situ with 100% yield. Two of these electrolyte additives proved exceptional in that they delay both the impedance rise and capacity fade in the Li-ion cells. We demonstrate this protective action and scrutinize the activation of these additives in the electrolyte. As a result, by “taming” spontaneous reactions and regaining full control over the chemical structure, new avenues open to targeted synthesis of electrolyte additives extending the operation of high voltage Li-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2023

Probing the Effectiveness in Stabilizing Lithium Metal Anodes through Functional Additives

A variety of electrolyte additives were comprehensively evaluated to understand their relative capability in stabilizing lithium metal anode. Although the Li||Cu test is an effective test to rule out ineffective additives, a reliable assessment of individual additives cannot be obtained just by a single evaluation method. Therefore, various methods must be combined to truly assess the stabilization of a lithium anode. Moreover, it was also discovered that a significant depletion of electrolytes occurred during the end-of-life of the lithium batteries, which partially contributed to the sudden failure of the lithium batteries during cycling. However, the main culprit of the sudden failure was identified as the significant increase in the resistance of the lithium metal anode. Further, when used as an additive, cyclic fluorinated carbonates are the most effective in stabilizing the lithium anode and improving the cycling performance of lithium batteries among all the common additives. Despite its cost-effectiveness, the additive in the conventional electrolyte approach provides insufficient protection for lithium metal due to the complete consumption of the additive materials, which is necessary to repair the solid-electrolyte interphase (SEI). Therefore, it is suggested that a larger ratio (>15 wt %) of the SEI former should be employed to achieve effective lithium stabilization.

25 ENERGY STORAGE↗
DOE OSTI2017

Mechanistic Study of Electrolyte Additives to Stabilize High-Voltage Cathode–Electrolyte Interface in Lithium-Ion Batteries

Current developments of electrolyte additives to stabilize electrode-electrolyte interface in Li-ion batteries highly rely on a trial-and-error search, which involves repetitive testing and intensive amount of resources. The lack of understandings on the fundamental protection mechanisms of the additives significantly increases the difficulty for the transformational development of new additives. In this study, we investigated two types of individual protection routes to build a robust cathode-electrolyte interphase at high potentials: (i) a direct reduction in the catalytic decomposition of the electrolyte solvent; and (ii) formation of a “corrosion inhibitor film” that prevents severely attack and passivation from protons that generated from the solvent oxidation, even the decomposition of solvent cannot not mitigated. Effect of three exemplary electrolyte additives: (i) lithium difluoro(oxalato)borate (LiDFOB); (ii) 3-hexylthiophene (3HT); and (iii) tris(hexafluoro-iso-propyl)phosphate (HFiP), on LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC 622) cathode were investigated to validate our hypothesis. It is demonstrated that understandings of both electrolyte additives and solvent are essential and careful balance between the cathode protection mechanism of additives and their side effects is critical to obtain optimum results. In conclusion, more importantly, this study opens up new directions of rational design of functional electrolyte additives for the next generation high-energy density lithium-ion chemistries.

25 ENERGY STORAGE↗
DOE OSTI2022

X-ray Computed Tomography as a Metrology Technique for the Analysis of Additively Manufactured Material

X-ray computed tomography (X-ray CT) is an analytical technique used in materials science to non-destructively characterize features in a variety materials like polymer, metals, composites, and explosives. It also has the capability of imaging additively manufacture, machine and assembled parts. The non-destructive imaging allows for the analysis of features (voids and cracks), which give a fundamental understanding of the material characteristics. Additionally, X-ray CT can obtain accurate measurements of dimensional and topographic variations due to different stimuli and assess the accuracy of material production. This study focuses on parts manufactured via metal additive manufacturing (AM). Although AM produces parts faster and easier, the printing process can produce defects (pores and surface roughness) that undermine the part’s mechanical properties and performance. The analysis of 3D printed objects has an asset in that the material has an STL file from which the item was printed, which is not available in many manufactured materials (i.e., foams) due to stochastic structures. For this study, the print accuracy of four additively manufactured cylinders will be assessed via X-ray CTto approximate the surface roughness and visualize any major morphological changes to assess the dimensional accuracy of complex additively manufactured parts. It was concluded that using X-ray CT to measure surface roughness was affective because reasonable surface roughness values were measured. Additionally, itwas determined that small-scale features can be produced via additive manufacturing with strong dimensional accuracy so long as the features are highly complex with sharp grooves.

36 MATERIALS SCIENCE↗
DOE OSTI2025

SiC Receiver/Reactor by Additive Manufacturing for Concentrated Solar Thermocatalysis with Thermal Energy Storage (Final Technical Report - Public)

The direct use of solar thermal energy provides opportunities for low-cost heating sources for a variety of applications. Ultra-high temperatures around 1000°C are high value and highly useful for energy-demanding industries. Many materials cannot withstand these conditions. In the area of Sustainable Chemicals, further limitations on material stability exist. Combining state-of-the-art materials with new designs provides a promising pathway for harvesting solar thermal energy and performing high temperature chemical processes. However, conventional manufacturing limits the potential for design flexibility. In this project, Additive Manufacturing was combined with advanced materials and new chemical reactor designs. In addition, 24/7 energy is necessary for chemical processing, and designs for ultra-high temperature thermal storage were devised. Specifically, preliminary design of a novel solar thermal receiver was developed in this project and designed to work with thermocatalytic reactors for producing sustainable chemicals and fuels. An ultra-high temperature particle storage system and heat exchangers were proposed to transport ultra-hot air as thermal fluid for the system. On a broader scale, this system could be used to tap solar thermal energy for a centralized facility with capability of transferring that heat to various segments at a full range of temperatures to 1000°C. The project pushed the temperature boundaries past those in current use, and Additive Manufacturing was envisaged for fabricating the receiver to meet requirements of extreme environments. An extensive analysis of silicon carbide additive manufacturing was performed to compare the thermal and mechanical properties of complex geometries compared to conventional material and those manufactured via other methods. The Additive Manufacturing via Binder-Jet printing was optimized and characterized to provide high quality and reproducible components capable of withstanding the proposed extreme environments. The designs for the concentrating solar thermal cavity with ultra-hot air thermal fluid showed high performance in simulations, attributable to the complex optimized geometries of the 3D printed systems. The bright future of Additive Manufacturing with advanced materials developments should provide more options and even higher quality as the technology further develops. Current costs for Additive Manufacturing of advanced ceramics is relatively low, however post-processing of the materials for extreme environments is currently high. There is little industrial-scale infrastructure for these, but it is growing as niche applications become more mainstream. The results of the project can be translated into similar extreme environments for concentrating solar thermal energy as well as its integration with ultra-hot air thermal fluids. A number of industries that require ultra-high temperatures need to electrify or otherwise decarbonize for climate goals, and this project showed that theoretically there is a pathway to do so with direct concentrated solar thermal power.

10 SYNTHETIC FUELS↗
NASA NTRS2015

A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing

In a NASA Aeronautics Research Institute (NARI) sponsored program entitled "A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing," evaluation of emerging materials and additive manufacturing technologies was carried out. These technologies may enable fully non-metallic gas turbine engines in the future. This paper highlights the results of engine system trade studies which were carried out to estimate reduction in engine emissions and fuel burn enabled due to advanced materials and manufacturing processes. A number of key engine components were identified in which advanced materials and additive manufacturing processes would provide the most significant benefits to engine operation. In addition, feasibility of using additive manufacturing technologies to fabricate gas turbine engine components from polymer and ceramic matrix composite were demonstrated. A wide variety of prototype components (inlet guide vanes (IGV), acoustic liners, engine access door, were additively manufactured using high temperature polymer materials. Ceramic matrix composite components included first stage nozzle segments and high pressure turbine nozzle segments for a cooled doublet vane. In addition, IGVs and acoustic liners were tested in simulated engine conditions in test rigs. The test results are reported and discussed in detail.

Ceramic Matrix Composites↗
NASA NTRS2015

A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing

In a NASA Aeronautics Research Institute (NARI) sponsored program entitled "A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing", evaluation of emerging materials and additive manufacturing technologies was carried out. These technologies may enable fully non-metallic gas turbine engines in the future. This paper highlights the results of engine system trade studies which were carried out to estimate reduction in engine emissions and fuel burn enabled due to advanced materials and manufacturing processes. A number of key engine components were identified in which advanced materials and additive manufacturing processes would provide the most significant benefits to engine operation. In addition, feasibility of using additive manufacturing technologies to fabricate gas turbine engine components from polymer and ceramic matrix composite were demonstrated. A wide variety of prototype components (inlet guide vanes (IGV), acoustic liners, engine access door) were additively manufactured using high temperature polymer materials. Ceramic matrix composite components included first stage nozzle segments and high pressure turbine nozzle segments for a cooled doublet vane. In addition, IGVs and acoustic liners were tested in simulated engine conditions in test rigs. The test results are reported and discussed in detail.

Additive Manufacturing↗
DOE OSTI2022

High Sensitivity of Non–Fullerene Organic Solar Cells Morphology and Performance to a Processing Additive

Although solvent additives are used to optimize device performance in many novel non-fullerene acceptor (NFA) organic solar cells (OSCs), the effect of processing additives on OSC structures and functionalities can be difficult to predict. Here, two polymer-NFA OSCs with highly sensitive device performance and morphology to the most prevalent solvent additive chloronaphthalene (CN) are presented. Devices with 1% CN additive are found to nearly double device efficiencies to 10%. However, additive concentrations even slightly above optimum significantly hinder device performance due to formation of undesirable morphologies. A comprehensive analysis of device nanostructure shows that CN is critical to increasing crystallinity and optimizing phase separation up to the optimal concentration for suppressing charge recombination and maximizing performance. Here, domain purity and crystallinity are highly correlated with photocurrent and fill factors. However, this effect is in competition with uncontrolled crystallization of NFAs that occur at CN concentrations slightly above optimal. This study highlights how slight variations of solvent additives can impart detrimental effects to morphology and device performance of NFA OSCs. Furthermore, successful scale-up processing of NFA-based OSCs will require extreme formulation control, a tuned NFA structure that resists runaway crystallization, or alternative methods such as additive-free fabrication.

14 SOLAR ENERGY↗
DOE OSTI2019

Alternative Low-Cost Additives to Improve the Saccharification of Lignocellulosic Biomass

A potential strategy to mitigate problems related to unproductive adsorption of enzymes onto lignin during the saccharification of lignocellulosic biomass is the addition of lignin-blocking agents to the hydrolysis reaction medium. However, there is a clear need to find more cost-effective additives for use in large-scale processes. Here, selected alternative low-cost additives were evaluated in the saccharification of steam-exploded sugarcane bagasse using a commercial enzymatic cocktail. The addition of soybean protein, tryptone, peptone, and maize zein had positive effects on glucose release during the hydrolysis, with gains of up to 36% when 8% (w/w) soybean protein was used. These improvements were superior to those obtained using bovine serum albumin (BSA), a much more expensive protein that has been widely reported for such an application. Moreover, addition of soybean protein led to a saving of 48 h in the hydrolysis, corresponding to a 66% decrease in the reactor operation time required. In order to achieve the same hydrolysis yield without the soybean additive, the enzyme loading would need to be increased by 50%. FTIR spectroscopy and nitrogen elemental analysis revealed that the additives probably acted to reduce unproductive binding of cellulolytic enzymes onto the lignin portion of the sugarcane bagasse.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2019

Impact of Lubricant Oil Additives on the Performance of Pd-Based Three-Way Catalysts

As alternative lubricant anti-wear additives are sought to reduce friction and improve overall fuel economy, it is important that these additives are also compatible with current emissions control catalysts. In the present work, a second-generation oil-miscible phosphorous-containing ionic liquid (IL), is evaluated for its impact on Pd-based three-way catalyst (TWC) reactivity and benchmarked against the industry standard zinc dialkyl-dithio-phosphate (ZDDP). The TWCs are exposed to the lubricant additives in an engine bench under four different scenarios: base case with no additive (NA), ZDDP-only, IL-only, and IL + ZDDP. The engine-aged TWC samples, along with the as-received TWC, are characterized through various analytical techniques including catalyst reactivity evaluation in a bench-flow reactor. The temperature of 50% conversion (T 50 ) for the ZDDP-aged TWC increases by 11, 21, and 36 °C for CO, C 3 H 6 , and C 3 H 8 , respectively, as compared with the no-additive case. Similarly, the T50 for IL-only and IL + ZDDP-aged TWCs also increase as compared with the no-additive case. Even though the water-gas-shift (WGS) reactivity is similar for all engine-aged samples, the IL-aged TWC had higher oxygen storage capacity than the ZDDP-aged TWC. EPMA analysis reveals penetration of phosphorus deep into the washcoat for all engine-aged TWCs. Results from XRD indicate the presence of CePO 4 and AlPO 4 on the washcoat of IL, ZDDP, and IL + ZDDP-aged TWC samples but not on the fresh and NA TWC samples. Additionally, ICP-OES results show a large amount of phosphorus in the washcoat of IL, ZDDP and IL + ZDDP-aged TWC samples and a lesser amount in NA TWC samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

The effects of filamentary Ni, graphene and lithium amide (LiNH2) additives on the dehydrogenation behavior of mechano-chemically synthesized crystalline manganese borohydride (Mn(BH4)2) and its solvent filtration/extraction

Highlights: • Effect of graphene, filamentary Ni and LiNH{sub 2} on the synthesis of Mn(BH{sub 4}){sub 2} investigated. • Mechanical dehydrogenation observed for filamentary Ni and LiNH{sub 2} but not for graphene. • All additives suppressed the release of B{sub 2}H{sub 6} during thermal decomposition of Mn(BH{sub 4}){sub 2} with filamentary Ni being the strongest suppressor. • The LiNH{sub 2} additive reduced the apparent activation energy for dehydrogenation to 44.9 ± 4.3 kJ/mol. • After solvent filtration and extraction of the (Mn(BH{sub 4}){sub 2}/LiCl) sample, a dimetallic hydride [{Li(Et_2O)_2}Mn{sub 2}(BH{sub 4}){sub 5}] was found. - Abstract: Dehydrogenation properties of mechano-chemically synthesized crystalline Mn(BH{sub 4}){sub 2} hydride without and with ultrafine filamentary carbonyl nickel (Ni), graphene and LiNH{sub 2} were investigated. It is reported for the first time that all additives suppressed the release of B{sub 2}H{sub 6} with the filamentary Ni additive being the most effective suppressor of B{sub 2}H{sub 6}. In DSC, the decomposition peak of Mn(BH{sub 4}){sub 2} was endothermic. The estimated apparent activation energy for isothermal dehydrogenation was dramatically reduced to 44.9 ± 4.3 kJ/mol for the 5 wt.% LiNH{sub 2} additive from about 76–81 kJ/mol range for the additive-free sample and 5 wt.% filamentary Ni and graphene additives. The most striking finding, that has never been reported in the literature, is that the process of solvent filtration and extraction of the mechano-chemically synthesized (Mn(BH{sub 4}){sub 2}/LiCl) sample, resulted in the crystallization of a dimetallic borohydride solvate [{Li(Et_2O)_2}Mn{sub 2}(BH{sub 4}){sub 5}] instead of crystalline Mn(BH{sub 4}){sub 2}. Its dehydrogenation behavior was investigated isothermally and by TGA/DSC.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Enhancement of the anaerobic hydrolysis and fermentation of municipal solid waste in leachbed reactors by varying flow direction during water addition and leachate recycle

Highlights: ► Combined downflow and upflow water addition improved hydraulic conductivity. ► Upflow water addition unclogged perforated screen leading to more leachate flow. ► The volume of water added and transmitted positively correlated with hydrolysis process. ► Combined downflow and upflow water addition increased COD production and yield. ► Combined downflow and upflow leachate recycle improved leachate and COD production. - Abstract: Poor performance of leachbed reactors (LBRs) is attributed to channelling, compaction from waste loading, unidirectional water addition and leachate flow causing reduced hydraulic conductivity and leachate flow blockage. Performance enhancement was evaluated in three LBRs M, D and U at 22 ± 3 °C using three water addition and leachate recycle strategies; water addition was downflow in D throughout, intermittently upflow and downflow in M and U with 77% volume downflow in M, 54% volume downflow in U while the rest were upflow. Leachate recycle was downflow in D, alternately downflow and upflow in M and upflow in U. The strategy adopted in U led to more water addition (30.3%), leachate production (33%) and chemical oxygen demand (COD) solubilisation (33%; 1609 g against 1210 g) compared to D (control). The total and volatile solids (TS and VS) reductions were similar but the highest COD yield (g-COD/g-TS and g-COD/g-VS removed) was in U (1.6 and 1.9); the values were 1.33 and 1.57 for M, and 1.18 and 1.41 for D respectively. The strategy adopted in U showed superior performance with more COD and leachate production compared to reactors M and D.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2019

CO Displacement in an Oxidative Addition of Primary Silanes to Rhodium(I)

The rhodium dicarbonyl {PhB(Ox Me2 ) 2 Im Mes }Rh(CO) 2 (1) and primary silanes react by oxidative addition of a nonpolar Si–H bond and, uniquely, a thermal dissociation of CO. These reactions are reversible, and kinetic measurements model the approach to equilibrium. Thus, 1 and RSiH 3 react by oxidative addition at room temperature in the dark, even in CO-saturated solutions. The oxidative addition reaction is first-order in both 1 and RSiH 3 , with rate constants for oxidative addition of PhSiH 3 and PhSiD 3 revealing k H / k D ~ 1. The reverse reaction, reductive elimination of Si–H from {PhB(Ox Me 2 ) 2 Im Mes }RhH(SiH 2 R)CO (2), is also first-order in [2] and depends on [CO]. The equilibrium concentrations, determined over a 30 °C temperature range, provide Δ H ° = –5.5 ± 0.2 kcal/mol and Δ S ° = –16 ± 1 cal·mol –1 K –1 (for 1 ⇌ 2). The rate laws and activation parameters for oxidative addition (Δ H ‡ = 11 ± 1 kcal·mol –1 and Δ S ‡ = –26 ± 3 cal·mol –1 ·K –1 ) and reductive elimination (Δ H ‡ = 17 ± 1 kcal·mol –1 and Δ S ‡ = –10 ± 3 cal·mol –1 K –1 ), particularly the negative activation entropy for both forward and reverse reactions, suggest the transition state of the rate-determining step contains {PhB(Ox Me 2 ) 2 Im Mes }Rh(CO) 2 and RSiH 3 . Comparison of a series of primary silanes reveals that oxidative addition of arylsilanes is ca. 5× faster than alkylsilanes, whereas reductive elimination of Rh–Si/Rh–H from alkylsilyl and arylsilyl rhodium(III) occurs with similar rate constants. Furthermore, the equilibrium constant K e for oxidative addition of arylsilanes is >1, whereas reductive elimination is favored for alkylsilanes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Triptycene as a Supramolecular Additive in PTB7:PCBM Blends and Its Influence on Photovoltaic Properties

Additives play an important role in modifying the morphology and phase separation of donor and acceptor molecules in bulk heterojunction (BHJ) solar cells. In this paper, we report triptycene (TPC) as a small-molecule additive for supramolecular control of phase separation and concomitant improvement of the power conversion efficiency (PCE) of PTB7 donor and fullerene acceptor-based BHJ polymer solar cells. An overall 60% improvement in PCE is observed for both PTB7:PC 61 BM and PTB7:PC 71 BM blends. The improved photovoltaic (PV) performance can be attributed to three factors: (a) TPC-induced supramolecular interactions with donor:acceptor components in the blends to realize a nanoscale phase-separated morphology; (b) an increase in the charge transfer state energy that lowers the driving force for electron transfer from donor to acceptor molecules; and (c) an increase in the charge carrier mobility. An improvement in efficiency using TPC as a supramolecular additive has also been demonstrated for other BHJ blends such as PBDB-T:PC 71 BM and P3HT:PCBM, implying the wide applicability of this new additive molecule. A comparison of the photostability of TPC as an additive for PTB7:PCBM solar cells to that of the widely used 1,8-diiodooctane additive shows ~30% higher retention of PV performance for the TPC-added solar cells after 34 h of AM 1.5G illumination. Finally, the results obtained suggest that the approach of using additives that can promote supramolecular interactions to modify the length scale of phase separation between donor and acceptor is very promising and can lead to the development of highly efficient and stable organic photovoltaics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

How additives for tin halide perovskites influence the Sn 4+ concentration

Tin halide perovskite (Sn-HPs) photovoltaics could potentially equal or exceed the performance of their more toxic Pb-based analogues if defect state densities, particularly originating from the presence of Sn 4+ , can be significantly decreased. Numerous additives are incorporated into Sn-HPs to minimize the amount of Sn 4+ , including SnF 2 , reducing agents such as hydrazine derivatives, and various antioxidants. However, despite the frequent use of additives to reduce Sn 4+ content, there is limited understanding of how they function and consequently limited guidance for the development of new additives. Herein, we use cyclic voltammetry to probe the redox behavior of SnI 2 , SnI 4 , Sn-HP precursor solutions, and 18 different additives. Through 119 Sn NMR measurements we show that hydrochloride containing additives undergo halide exchange with SnI 4 to form SnI x Cl y , which results in decreased Sn 4+ concentrations and less p-type character in the Sn-HP films. We find that the most effective additive at lowering the Sn 4+ content in FASnI 3 is not capable of reducing SnI 4 or forming SnI x Cl y , but rather it acts as a sacrificial and coordinating antioxidant. In general, when selecting additives for Sn-HPs it is important to account for the redox potential, coordination with Sn species, ability to react with oxygen, and the potential for halide exchange.

36 MATERIALS SCIENCE↗