Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “absorber”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Poly(cyclosilane) Connectivity Tunes Optical Absorbance

We report herein the influence of skeletal connectivity on the conformation-dependent optical properties of cyclosilane homo- and copolymers. 1,3-Linked cyclosilanes were bathochromically shifted by 20 nm in solution relative to 1,4-linked cyclosilanes, an effect reproduced by quantum chemical calculations on oligomeric model systems. Polysilane optical properties are conformation-dependent, and 1,3-linked cyclosilanes were hypothesized to adopt a favorable conformation unavailable to 1,4-linked cyclosilanes constrained to an endocyclic gauche conformation. Copolymerization of the isomeric cyclosilanes 1,3Si 6 and 1,4Si 6 afforded linear statistical copolymers, as characterized by 1 H and 29 Si NMR spectroscopies. The distinct connectivity of each comonomer was found to give rise to tunable absorption spectra, where the position of the absorption band systematically increased with the increased corporation of 1,3Si 6 . Computational studies pointed to conformation-dependent changes in orbital symmetry in shifting the most intense transition from the low-energy highest occupied molecular orbital (HOMO) → lowest unoccupied molecular orbital (LUMO) transition to a higher-energy HOMO → LUMO + n transition. Here, the results of these studies demonstrate for the first time the role of silicon skeletal connectivity in controlling conformation and optoelectronic properties and provide new insight into the structure-based design of solution-processable silicon-based polymeric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Mitigating Band Tailing in Kesterite Solar Absorbers: Ab Initio Quantum Dynamics

Open-circuit voltage deficits are limiting factors in kesterite solar cells. Addressing this issue by suppressing band tailing and nonradiative charge recombination is essential for enhancing the performance. We employ ab initio nonadiabatic molecular dynamics to elucidate the origin of band tailing and charge losses and propose a mitigation strategy. The simulations show that Cu–Zn disorder, associated with antisite defect clusters [Cu Zn +Zn Cu ], is a significant source of band tailing in kesterites, as evidenced by the much larger Urbach energy in disordered than ordered kesterites. Cu–Zn disorder gives rise to new sulfur-centered coordination polyhedra, increases structural inhomogeneity, changes electrostatic potential at sulfur centers, and shifts the S(3p) orbital energy. Differences in the S(3p)/Cu(3d) and S(3p)/Sn(5s) hybridization strengths and the S(3p) orbital energy shift reduce the band gap by 0.37 eV. Furthermore, Cu–Zn disorder enhances vibrational motion of sulfur anions and surrounding cations, increasing band gap fluctuations by 15 meV. The stronger electron–phonon interactions reduce charge carrier lifetimes and limit the kesterite solar cell efficiency. Partial substitution of Zn with Cd facilitates structural ordering and significantly suppresses band tailing, particularly in disordered systems. The improvement can be attributed to the larger atomic radius and mass of Cd, which weakens bonding around the anion, suppresses S-related vibrations within the covalent tetrahedra, and reduces nonadiabatic coupling, thereby increasing charge carrier lifetimes. The reported results establish the key influence of cation disorder on band tailing and reduced charge carrier lifetimes in kesterites and highlight cation disorder engineering as a strategy to achieve high-efficiency kesterite solar cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Biomass burning aerosols in most climate models are too absorbing

Uncertainty in the representation of biomass burning (BB) aerosol composition and optical properties in climate models contributes to a range in modeled aerosol effects on incoming solar radiation. Depending on the model, the top-of-the-atmosphere BB aerosol effect can range from cooling to warming. By relating aerosol absorption relative to extinction and carbonaceous aerosol composition from 12 observational datasets to nine state-of-the-art Earth system models/chemical transport models, we identify varying degrees of overestimation in BB aerosol absorptivity by these models. Modifications to BB aerosol refractive index, size, and mixing state improve the Community Atmosphere Model version 5 (CAM5) agreement with observations, leading to a global change in BB direct radiative effect of -0.07 W m -2 , and regional changes of -2 W m -2 (Africa) and -0.5 W m -2 (South America/Temperate). Our findings suggest that current modeled BB contributes less to warming than previously thought, largely due to treatments of aerosol mixing state.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Mix and match light absorbers

Here, perovskite and organic semiconductors can be combined to make tandem solar cells but, to date, their efficiency has hovered around 20%. Now, researchers demonstrate a 23.6% tandem by reducing interfacial defects to improve the perovskite cell's voltage and developing an ultrathin interconnection layer.

14 SOLAR ENERGY↗
DOE OSTI2025

Constraining the impact of chlorine as a neutron absorber in next-gen fast reactor designs

The role of chlorine as a neutron poison and as a seed for producing radioactive waste in nuclear systems has driven a renewed interest to improve its nuclear data uncertainties. Additionally, basic and applied science programs that use CLYC (Cs 2 LiYCl 6 :Ce) detectors for neutron spectroscopy and monitoring are also very sensitive to any change in chlorine nuclear data for simulations of the detector response. In this work, sensitivities relevant for these different applications are addressed through simulations of the efficiency of CLYC detectors in a fast fission spectrum when applying new chlorine nuclear data as input. These simulations are validated by an experimental measurement using CLYC detectors coupled to an ionization chamber loaded with a 252 Cf spontaneous fission source. The results are then used to obtain the first reliable direct measurement of the 35 Cl(n,p 0 ) and summed Cl(n,p+n,α) fission spectrum average cross sections, found to be 54.7(32) and 105.0(98) mb, respectively. The results are within uncertainty of calculated fission spectrum averaged cross sections based on recently re-evaluated chlorine nuclear data, which confirm recent impact studies performed for the Molten Chloride Reactor Experiment. Meanwhile, there currently exists only one published criticality benchmark experiment that is sufficiently sensitive to chlorine nuclear data. Discrepancies are found with this set of criticality safety benchmarks, which are more sensitive to thermal and epithermal neutron energies than the energies, above 100 keV, tested in this current work. Hence, there is still a need to re-evaluate the chlorine nuclear data at lower energies to assess these discrepancies. Interpretation of the data from future “faster” criticality benchmarks, which are needed for next-gen fast reactor designs, benefit from the improved constraints on the chlorine nuclear data validated in this work.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Reliability-based hull geometry optimisation of a point-absorber wave energy converter with power take-off structural reliability objectives

Recent studies have focused on optimising wave energy converter (WEC) designs, maximising their power performance and techno-economic feasibility. Reliability has yet to be fully considered in these formulations, despite its impact on cost and performance. In this study, this gap is addressed by developing a reliability-based design optimisation framework for WEC hull geometries to explore the trade-off between power performance and power take-off (PTO) system damage equivalent loading (DEL). Optimised hull geometries for two sites are considered (from the centre of the North Sea and off the west coast of Norway), and two directions of motions (heave and surge). Results indicate that site characteristics affect the potential power production and DEL for an optimal WEC design. These are also affected by the direction of motion for power extraction, which also significantly changes optimal hull shape characteristics. Optimal surging WEC designs have edges facing oncoming wave directions, while heaving WECs have pointed bottoms, both to streamline movement. Larger, more convex WECs result in greater power production and DEL, while smaller, more concave WECs result in lesser power production and DEL. These findings underline the importance of considering WEC hull geometry in early design processes to optimise cost, power production, and reliability.

16 TIDAL AND WAVE POWER↗
DOE OSTI2023

Stationary Bragg reflection of laser light in inhomogeneous absorbing plasmas inside inertial confinement fusion Hohlraums

Laser-produced plasma in inertial confinement fusion (ICF) Hohlraums are marked with density non-uniformity whose length scale can go down to micrometers. This scale is of the order of the laser wavelength. The WKB approximation, which is classically used in radiation-hydrodynamic codes to compute the laser trajectory, cannot correctly take into account such small-scale inhomogeneity of the plasma. Going beyond this approximation, we predict a novel mechanism for the laser reflection. Here we show that an electromagnetic plane wave with wave number k resonates with the k B =2 k Fourier component of a multimode perturbation of the background density and generates a reflected wave. It is the first time that this reflection is considered for stationary inhomogeneous ICF plasmas, and the energy absorption is taken into account. This mechanism, which is a form of Bragg reflection, can occur away from the critical surface and generate a drift of the location of the laser absorption. Furthermore, this absorption will be periodically modulated with a k B wave number. The stationary Bragg reflection can explain ongoing discrepancies between experimental and numerical data about laser trajectory and absorption in ICF Hohlraums.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Destruction of absorbing metal films during laser printing with gel microdroplets

The degree of destruction and evaporation of metal films (Au and Ti, thickness ∼50 nm) with a gel layer during laser transfer of small volumes of a gel substrate is estimated depending on the laser fluence value. The dynamics of these processes for dry films and films with a gel layer at fluences close to threshold values is investigated using a probe beam of a He – Ne laser. It is shown that the presence of a gel leads to an increase in the ablation threshold, but the time during which the process of structural changes in the film material is completed does not change significantly. The results obtained can be used to improve the laser bioprinting technology. (interaction of laser radiation with matter)

36 MATERIALS SCIENCE↗
DOE OSTI2020

Damped Ly α absorbers and atomic hydrogen in galaxies: the view of the GAEA model

ABSTRACT Using the GAEA semi-analytic model, we analyse the connection between Damped Ly α systems (DLAs) and H i in galaxies. Our state-of-the-art semi-analytic model is tuned to reproduce the local galaxy H i mass function, and that also reproduces other important galaxy properties, including the galaxy mass–gas metallicity relation. To produce catalogues of simulated DLAs we throw 105 random lines of sight in a composite simulated volume: dark matter haloes with log$(\frac{M_{200}}{ {\rm M}_{\odot }}) \ge 11.5$ are extracted from the Millennium Simulation, while for $9.2 \le \log (\frac{M_{200}}{ \mathrm{M}_{\odot }})\lt 11.5$ we use the Millennium II, and for $8 \le \log (\frac{M_{200}}{\mathrm{M}_{\odot }}) \lt 9.2$ a halo occupation distribution model. At 2 < z < 3, where observational data are more accurate, our fiducial model predicts the correct shape of the column density distribution function, but its normalization falls short of the observations, with the discrepancy increasing at higher redshift. The agreement with observations is significantly improved increasing both the H i masses and the disc radii of model galaxies by a factor of 2, as implemented ‘a posteriori’ in our 2M−2R model. In the redshift range of interest, haloes with $M_{200} \ge {10}^{11} \, \mathrm{M}_{\odot }$ give the major contribution to ΩDLA, and the typical DLA host halo mass is $\sim \!{10}^{11} \, \mathrm{M}_{\odot }$. The simulated DLA metallicity distribution is in relatively good agreement with observations, but our model predicts an excess of DLAs at low metallicities. Our results suggest possible improvements for the adopted modelling of the filtering mass and metal ejection in low-mass haloes.

Di Gioia, Serafina↗
DOE OSTI2020

Doping CdSexTe1-x/CdTe Graded Absorber Films with Arsenic for Thin-Film Photovoltaics

CdTe thin-film photovoltaics have demonstrated some of the lowest costs of electricity generation owing to its low material cost and ease of manufacturing. However, the full potential of polycrystalline CdTe photovoltaics can only be realized if the open-circuit voltage can be increased beyond 1 V Open-circuit voltage ~850-900 mV has been consistently observed for state-of-the-art polycrystalline CdTe solar cells. Open-circuit voltage of over 1V has been demonstrated for single crystal CdTe devices by doping with Group V elements. Therefore, this study is aimed at understanding behavior of polycrystalline CdTe devices with arsenic doping, its activation and process and performance optimization in order to overcome current voltage limitations in CdTe solar cells.

14 SOLAR ENERGY↗