Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Voltammetry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Pentavalent Uranium Enriched Mineral Surface under Electrochemically Controlled Reducing Environments

Redox reactions of uranium (U) in aqueous environments have important impacts on the mobility and isotopic fractionation of U in the geosphere. Pentavalent U as the cationic uranyl ion, UO 2 +, is rarely observed in naturally occurring samples because of its limited lifetime, but it may be an important intermediate state controlling the redox kinetics between hexavalent and tetravalent U. Increasing evidence has indicated that U(V) can be stabilized under laboratory conditions. Here, we showed that U(V) is the dominant species on the magnetite (Fe 3 O 4 ) surface under reducing conditions controlled by electrochemical methods. Cyclic voltammetry reveals coupled redox peaks corresponding to the U(VI)O 2 2+ /U(V)O 2+ one-electron redox reaction. Magnetite electrodes polarized at a series of potentials to reduce U(VI)O 2 2+ were characterized by X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), and Auger electron mapping. Overall, the results showed that up to twice the amount of U(V) to U(VI) was present on the magnetite surface. U(V) adopted a typical uranyl-type structure, and the U coverage on the magnetite surface increased with decreasing potentials. The formation of mixed-valence U(V)/U(VI) species on the surface of magnetite may hinder the U(V) disproportionation reaction, thereby eliminating the presence of tetravalent U. These results show that U(V) can exist over short time scales as the dominant U species on mineral surfaces under selected reducing conditions by the controlled polarization of a mineral electrode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Dissolved CO 2 Modulates the Electrochemical Capacitance on Gold Electrodes

The presence of CO 2 at an electrified interface between an aqueous electrolyte and a metal electrode is the prerequisite for many electrochemical CO 2 capture technologies. To understand the behavior of dissolved CO 2 at an aqueous electrified interface, we characterized the electrochemical interface of planar gold electrodes with cyclic voltammetry, electrochemical impedance spectroscopy (EIS), electrochemical surface plasmon resonance (EC–SPR), and attenuated total reflectance surface-enhanced infrared spectroscopy (ATR–SEIRAS). Under all investigated conditions, we observed a decrease in the electrochemical capacitance upon saturation of the electrolyte with CO 2 , as compared to an electrolyte saturated with Ar. EIS and EC–SPR showed that this capacitance reduction was also potential dependent: it reached a minimum near the point of zero charge and became more significant as the applied potential moved further away from the point of zero charge. Hybrid quantum–classical simulations of the gold/aqueous electrolyte interface indicate that bicarbonate decreases the capacitance and modifies the composition of the electric double layer. In addition to the binding of bicarbonate under positive bias, we propose that molecular CO 2 can be induced by applied potential to concentrate in the diffuse layer of the electric double layer, leading to a reduction in the electrochemical capacitance under both negative and positive bias. Furthermore, this work advances the understanding of non-Faradaic effects of dissolved CO 2 at aqueous electrified interfaces of relevance for electrochemical CO 2 capture.

25 ENERGY STORAGE↗
DOE OSTI2025

Pyrolyzed Parylene-N for in Vivo Electrochemical Detection of Neurotransmitters

Carbon electrodes are typically used for in vivo dopamine detection, and new types of electrodes and customized fabrication methods will facilitate new applications. Parylene is an insulator that can be deposited in a thin layer on a substrate and then pyrolyzed to carbon to enable its use as an electrode. However, pyrolyzed parylene has not been used for the real-time detection of neurochemicals by fast-scan cyclic voltammetry. In this work, we deposited thin layers of parylene-N (PN) on metal wires and then pyrolyzed them to carbon with high temperatures in a rapid thermal processor (RTP). Different masses of PN, 1, 6, and 12 g, were deposited to vary the thickness. RTP-PN (6 g) produced a 194 nm layer carbon thickness and had optimal electrochemical stability. Pyrolyzed parylene-N modified electrodes (PPNMEs) were characterized for electrochemical detection of dopamine, serotonin, and adenosine. Background-normalized currents at PPNMEs were about 2 times larger than those of carbon-fiber microelectrodes (CFMEs). Rich defect sites and oxygen functional groups promoted the neurochemical adsorption of cationic neurotransmitters. PPNMEs resisted fouling from serotonin polymer formation. PPNMEs were used in vivo to detect stimulated dopamine release and monitor spontaneous adenosine release. Pyrolyzed parylene is a sensitive and fouling-resistant thin-film carbon electrode that could be used in the future for making customized electrodes and devices.

25 ENERGY STORAGE↗
DOE OSTI2025

ATR-SEIRAS Reveals Potential Inversion and Associated Electron Transfer Kinetics in the Reduction of Surface-Confined Anthraquinone

The detection of stable semiquinone radicals on an anthraquinone (AQ) layer chemically grafted to an electrode surface in aqueous electrolytes has been elucidated by using attenuated total reflection surface enhanced infrared absorption spectroscopy (ATR-SEIRAS). In very alkaline conditions (pH 13), the reduction of the AQ involves no proton transfer, but surface sensitive infrared spectroscopy reveals that the anthraquinone dianion forms a strong hydrogen bonding network with coadsorbed water, leading to irreversible features in the voltammetry. The potential dependence of the IR band assigned to the AQ radical is consistent with the enhanced hydrogen bonding network causing increased stabilization of the quinone radical and supports the predicted response of a system under mild potential inversion, whereby the formal potential for the reduction of the anthraquinone radical is positive of the reduction potential of the neutral AQ molecule. Time-resolved ATR-SEIRAS is used to measure the transient formation of the AQ •– radical, from which rate constant information can be extracted using the Butler–Volmer model involving two one-electron transfers without a direct disproportionation reaction. The potential dependence of the rate constants is consistent with the potential inversion and can be used to qualitatively simulate the measured cyclic voltammograms. In conclusion, the thermodynamic and kinetic analyses re-emphasize long established deficiencies associated with using one-electron reaction formalisms to characterize multi-electron systems.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗
DOE OSTI2020

Decoupling Kinetics and Thermodynamics of Interfacial Catalysis at a Chemically Modified Black Silicon Semiconductor Photoelectrode

Understanding the interplay between the kinetics of interfacial catalytic reactions and the thermodynamics of an underlying semiconductor electrode is imperative for rational construction of efficient photoelectrocatalytic systems. Current understanding of the thermodynamic effects of molecular catalyst attachment to semiconductor electrodes is limited. We report the immobilization of a molecular cobalt bis(benzenedithiolate) proton reduction catalyst onto nanoporous black silicon (b-Si) electrodes through p–p interactions with a series of aromatic molecules covalently attached to the surface. Furthermore, intensity-modulated high-frequency resistivity and linear sweep voltammetry measurements are used to show that the kinetics of proton reduction are decoupled from the thermodynamic properties of the underlying b-Si photoelectrode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Operando X-ray Reflectivity Reveals the Dynamical Response of Ti 3 C 2 MXene Film Structure during Electrochemical Cycling

The dynamical structural response of MXenes during electrochemical ion intercalation is critical for their functionality in fast chemical actuation and high-power electrical energy storage but has yet to be observed. Here, the dynamically evolving layer spacing of a Ti 3 C 2 T $x$ MXene film was observed using time-resolved operando X-ray reflectivity during cyclic voltammetry for applied potentials between +0.3 and -0.7 V (vs Ag/AgCl) at sweep rates 1 ≤ $v$ ≤ 500 mV/s. The pseudocapacitive electrochemical MXene response in the aqueous 0.1 M Li 2 SO 4 electrolyte, including both capacitive and redox characteristics, is characterized by kinetically limited lithium intercalation and layer contraction. In conclusion, two types of dynamical responses were observed: slow and fast lattice contraction regimes versus applied potential are correlated with the capacitive and redox features, respectively, with structural relaxation rates that scale as ~$v$ 1/2 and ~$v$, revealing two distinct dynamical structural responses during electrochemical ion intercalation.

25 ENERGY STORAGE↗
DOE OSTI2021

Cross-Platform Classifier of Chemical Stability for Charged Redoxmers

The development of new redox flow battery chemistries is hampered by time-consuming organic syntheses and electrochemical characterization of candidate redoxmer molecules. Here, we use Sure Independence Screening and Sparsifying Operator (SISSO) to demonstrate a cross-platform classifier for chemical stability of charged redoxmers in electrolyte solutions. This SISSO model yields a single formula to separate positively charged dialkoxyarene catholytes and negatively charged pyridinium anolytes into stable and unstable species in acetonitrile-based electrolytes as probed through cyclic voltammetry measurements. Using such classifiers, the stability of new compounds across different synthetic platforms can be rapidly assessed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Switchable Charge Storage Mechanism via in Situ Activation of MXene Enables High Capacitance and Stability in Aqueous Electrolytes

The need for reliable renewable energy storage devices has become increasingly important. However, the performance of current electrochemical energy storage devices is limited by either low energy or power densities and short lifespans. Herein, we report the synthesis and characterization of multilayer Ti 4 N 3 T x MXene in various aqueous electrolytes. We demonstrate that Ti 4 N 3 T x can be electrochemically activated through continuous cation intercalation over a 10 day period using cyclic voltammetry. A wide operating window of 2 V is maintained throughout activation. After activation, capacitance at 2 mV s -1 increases by 300%, 140%, and 500% in 1 M H2SO4, 1 M MgSO4, and 1 M KOH, respectively, while maintaining ~600 F g -1 at 2 mV s–1 after 50000 cycles in 1 M H 2 SO 4 . This activation process is possibly attributed to the unique morphology of the multilayered material, allowing cation intercalation to increase access to redox-active sites between layers. This work adds to the growing repository of electrochemically stable MXenes reported for aqueous energy storage applications. These findings offer a reliable option for reliable energy storage devices with potential applications in large-scale grid storage and electric vehicles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Morphology and Crystallinity Effects of Nanochanneled Niobium Oxide Electrodes for Na-Ion Batteries

Niobium pentoxide (Nb 2 O 5 ) is a promising negative electrode for sodium ion batteries (SIBs). By engineering the morphology and crystallinity of nanochanneled niobium oxides (NCNOs) the kinetic behavior and charge storage mechanism of Nb 2 O 5 electrodes were investigated. Amorphous and crystalline NCNO samples were made by modulating anodization conditions (20 - 40V and 140 - 180 °C) to synthesize nanostructures of differing pore sizes and wall thicknesses with identical chemical composition. The electrochemical energy storage properties of the NCNOs were studied with the amorphous samples showing better overall rate performance than the crystalline samples. The enhanced rate performance of the amorphous samples is attributed to the higher capacitive contributions and Na-ion diffusivity analyzed from cyclic voltammetry (CV) and galvanostatic intermittent titration technique (GITT). It was found that the amorphous samples with smaller wall thicknesses facilitated improved kinetics. Among samples with similar pore size and wall thickness, the difference in their power performance stems from crystallinity effect, which plays a more significant role in the resulting kinetics of the materials for Na-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Etching-Chemistry-Driven Ruthenium Doping on Ti 3 C 2 T x MXene for Optimizing Electrochemical Performance

We demonstrate that the etching chemistry used during MXene synthesis from Ti 3 AlC 2 MAX phase significantly influences surface functionalization and structural vacancies, which in turn affect ruthenium (Ru) ion interactions. Using hydrofluoric acid (HF) and ammonium bifluoride (NH 4 HF 2 ) as etchants, we obtained MXene surfaces with distinct functional groups and Ti vacancies that impact Ru ion interactions and electrochemical performance. Both MXene variants (labeled MX(H) and MX(N), respectively) exhibited negative zeta potentials in their pristine state, but upon the addition of Ru the zeta potential for MX(H) reached 12.9 mV while that for MX(N) remained negative at −6.4 mV. This adsorption resulted in a 14.4-fold increase in the specific capacitance of MX(H)/Ru compared to pristine MX(H), whereas MX(N)/Ru exhibited only a 4.4-fold increase over its pristine counterpart. X-ray diffraction analysis identified the formation of ammonium titanium oxide fluoride, (NH 4 ) 3 TiOF 5 , on MX(N), which likely contributed to its reduced Ru adsorption. X-ray photoelectron spectroscopy suggested the presence of Ti vacancies in both MXene variants; however, their behavior toward Ru accommodation differed markedly, with MX(H) showing the most obvious shift in the Ti 2p peak in the XPS survey spectrum, while MX(N) showed the most obvious shift in the C 1s peak. Electron paramagnetic resonance spectroscopy further demonstrated a distinct alteration in the spectral signatures of MX(H) upon Ru addition, in contrast to the negligible changes in MX(N), indicating effective passivation of the Ti defect sites in MX(H) via vacancy-assisted Ru doping. Cyclic voltammetry showed that Ru-incorporated MX(H) nanocomposites exhibit more efficient redox-active sites, as reflected in their higher capacitance values. These findings highlight the pivotal role of MXene surface chemistry in controlling cation adsorption, providing valuable insights for the rational design of high-performance electrodes.

2D surface engineering↗
DOE OSTI2025

Geobacter sulfurreducens Immobilized Boron-Doped Diamond Electrodes for Uranium(VI) in Water Electrochemical Bioremediation

The proliferation of nuclear science and technology has resulted in an increase in nuclear waste containing uranium, posing significant risks to both human and environmental health. This study proposes the use of Geobacter sulfurreducens (G. sulfurreducens) modified boron-doped diamond electrodes to facilitate the reduction and removal of uranium(VI) from aqueous media. The bioremediation process involves electrochemically immobilizing the bacteria on a boron-doped diamond electrode (BDD). The immobilization process requires applying reduction potentials ranging from −0.40 to −0.70 V (vs Ag/AgCl (3 M NaCl)), with −0.60 V identified as the optimal potential for effective bacterial modification. The uranium source is provided by a 2.0 mM uranyl acetate solution in G. sulfurreducens growth medium. Scanning electron microscopy (SEM) reveals a highly uniform layer of uranium on the electrode surface. Energy-dispersive X-ray fluorescence spectroscopy (EDS) and cyclic voltammetry (CV) studies confirm the presence of uranium in the system. Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) successfully elucidate the reduction process of U(VI) to predominantly U(IV) using a bacteria-electrode coupled system. Additionally, a comparison is made with the electrochemical removal of uranyl ions using the electrodeposition method on unmodified BDD. Results demonstrate the presence of three uranium oxide species (UO 2 , UO 3 , and U 3 O 8 ) on the BDD electrode after experimentation, in contrast to the G. sulfurreducens/BDD assembly, which achieves the predominant reduction of UO 2 2+ to UO 2 with a small quantity of UO 3 as the final species. This study highlights the efficient electrochemical removal of uranyl ions from aqueous media at the G. sulfurreducens/BDD interface through chronoamperometry, presenting a promising approach for remediating sites contaminated with radioactive materials. The findings contribute to the exploration of sustainable alternatives for managing nuclear waste, emphasizing the potential of this electrochemical bioremediation strategy.

Bacteria↗
DOE OSTI2026

Urea-to-Ammonia Conversion at Proteus mirabilis Modified Pt–Ni/BDD Electrodes

Efficient wastewater recycling technologies are essential for long-duration space missions and sustainable water management on Earth. Here, a bioelectrochemical system integrating Proteus mirabilis with a platinum–nickel-modified boron-doped diamond electrode (Pt–Ni/BDDE) for urea-to-ammonia conversion in synthetic urine is presented. Immobilized P. mirabilis catalyzes enzymatic ureolysis, converting urea into ammonia, which is subsequently oxidized electrochemically, and no direct electrochemical urea oxidation is observed. Cyclic voltammetry (CV) of P. mirabilis on Pt–Ni/BDDE in 0.1 M urea and synthetic urine revealed a broad anodic oxidation peak at approximately 0.55–0.75 V vs Ag/AgCl (sat. KCl), corresponding to ammonia oxidation. Control experiments using bare BDDE and Pt–Ni/BDDE in synthetic urine showed no oxidation peak, establishing that the bioelectrocatalytic response originates exclusively from the bioelectrode interface. Chronoamperometry studies revealed that immobilization potential and time critically influenced bacterial adhesion and electrochemical response, with optimal conditions yielding a maximum current density of 0.0055 mA·cm –2 . These quantitative results establish that microbial ureolysis can be efficiently coupled with advanced electrode materials for urea-to-ammonia conversion, offering a promising self-sustaining strategy for urine processing and water recovery in closed-loop life support systems.

Ammonia↗
DOE OSTI2026

Ca Metal Batteries and Sn Anode Alloying: Resolving Misconceptions in Ca–Sn Alloy Formation

Ca metal anode suffers from surface passivation and struggles to effectively plate and strip in conventional Ca electrolytes, making the development of alloy anode for calcium metal battery essential. This work systematically and carefully evaluates the electrochemical formation and feasibility of the Sn anode and its possibility of alloying with Ca using a combination of cyclic voltammetry, scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM/EDS), X-ray diffraction (XRD), and synchrotron transmission X-ray microscopy (TXM). Electrochemical measurements and SEM/EDS analyses indicate apparent Ca alloy formation. However, detailed XRD and TXM characterization reveal substantial lithium-ion involvement when lithium metal is employed as the reference electrode, even in electrolytes with high Ca salt concentrations. These findings highlight a significant risk of misinterpretation: Although limited Ca–Sn alloying may occur, the faster kinetics of Li + can dominate the alloying process, leading to a Li-driven reactions at the Sn anode. In contrast, cells constructed with Ca metal as both reference and counter electrodes exhibit distinct redox features only during the initial cycles, followed by rapid cell failure. The high oxidation currents induce severe Ca passivation, occurring nearly concurrently with Sn dealloying. Overall, this study provides critical insight into the practical limitations and common experimental artifacts associated with Ca metal battery systems and underscores the necessity for rigorous cell design and cautious interpretation when evaluating alloy chemistry in multivalent Ca-based batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2026

In Situ EXAFS Study of Mo–P Bond Dynamics in Molybdenum Phosphide during CO 2 Reduction and Hydrogen Evolution

Transition Metal Phosphides (TMPs) are widely studied as catalysts in reactions like hydrogen evolution, oxygen reduction, and hydrodesulfurization. TMPs have demonstrated remarkable efficiency in accelerating reactions by providing active sites for adsorption and facilitating the transformation of reaction intermediates, a feature that has increased the interest of TMPs in the electrochemical carbon dioxide reduction reaction (eCO 2 RR). Despite their growing use, the potential-dependent structural behavior of TMPs under operating electrochemical conditions remains insufficiently understood. This work investigates the dynamics of the Mo−P bond during eCO 2 RR and hydrogen evolution reaction (HER) using in situ extended X-ray absorption spectroscopy (EXAFS) studies at the Mo−K edge. Structural characterization of the synthesized MoP nanoparticles was performed by powder X-ray diffraction (XRD) and transmission electron microscopy (TEM). Results of the overall electrochemical activity of MoP are presented through linear sweep voltammetry (LSV) experiments in the potential range of 0 to −1.5 V versus Ag/AgCl and chronoamperometry (CA). Liquid products were analyzed by 1 H NMR spectroscopy. The synthesized catalyst showed increasing activity with the highest Faradaic efficiency of 11.75% for C 2+ products at −1.3 V vs Ag/AgCl. In situ EXAFS revealed a change in the average Mo−P bond distance during eCO 2 RR, whereas no such change was observed during the hydrogen evolution reaction (HER). This finding suggests that phosphorus, particularly through modulation of the Mo−P bond length, plays an important role in the eCO 2 RR and demonstrates how in situ EXAFS can track local structural perturbations in MoP catalysts during electrochemical operation, providing complementary structural insight that correlates with electrochemical behavior.

Catalysts↗
DOE OSTI2026

Synthesis, Characterization, and Electrochemical Studies of Fused Oxazolidine Complexes of Molybdenum

Two fused-bisoxazolidine ligands (FOX OH and FOX OMe ) are used to coordinate to molybdenum carbonyl, producing Mo(CO) 3 (FOX OR ). The ligands bind in a κ 3 - NNN fashion to the metal center creating an octahedral complex. Difficulty in further substitution of CO and the lack of reactivity prompted research into alternative starting materials. This resulted in the synthesis of a MoCl 3 (FOX OMe ) complex. All complexes are characterized by single-crystal X-ray crystallography and cyclic voltammetry.

ligands↗
DOE OSTI2022

MPCVD-Grown Nanodiamond Microelectrodes with Oxygen Plasma Activation for Neurochemical Applications

Nanodiamonds (NDs) are a carbon nanomaterial that has a diamond core with heteroatoms and defects at the surface. The large surface area, defect sites, and functional groups on NDs make them a promising material for electrochemical sensing. Previously, we dip-coated ND onto carbon-fiber microelectrodes (CFMEs) and found increases in sensitivity, but the coating was sparse. Here, for this work, we directly grew thin films of ND on niobium wires using microwave plasma chemical vapor deposition (MP-CVD) to provide full surface coverage. ND microelectrodes show a reliable performance in neurotransmitter detection with good antifouling properties. To improve sensitivity, we oxygen plasma etched ND films to activate the surface and intentionally add defects and oxygen surface functional groups. For fast-scan cyclic voltammetry detection of dopamine, oxygen plasma-etching increases the sensitivity from 21 nA/μM to 90 nA/μM after treatment. Fouling was tested by repeated injections of serotonin or tyramine, and both ND and plasma oxidized nanodiamond (NDO) microelectrodes maintain their currents better compared to CFMEs and therefore are more antifouling. Furthermore, a biofouling test in brain slices shows that ND microelectrodes barely have any current drop, while the more hydrophilic NDO microelectrodes decrease more, but still not as much as CFMEs. Overall, grown ND microelectrodes are promising in neurotransmitter detection with excellent fouling resistance, whereas oxygen plasma etching slightly lowers the fouling resistance but dramatically increases sensitivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Facile Room-Temperature Electrodeposition of Rare Earth Metals in a Fluorine-Free Task-Specific Electrolyte

Electrochemical deposition of rare earth metals at room temperature has attracted increasing interest due to its advantage in energy efficiency over traditional hydrometallurgical and pyrometallurgical processes. Recent progress has been made with fluorinated electrolyte systems; however, the formation of an electrode-passivating fluoride layer by electrolyte decomposition is often overlooked. Such a passivation layer causes significant and rapid decay of the deposition current and significantly hinders practical application. To address this issue, we demonstrate a fluorine (F)-free task-specific electrolyte utilizing the borohydride anion for the efficient electrodeposition of rare earth metals. By eliminating the passivation effect, the deposition process exhibits a stable current and accumulates a thick neodymium deposit on the electrode. Raman spectroscopy of the electrolyte reveals a synergetic effect between rare earth borohydride and lithium borohydride which promotes the dissociation of both borohydride salts, resulting in significantly increased ionic conductivity and electrochemical performance. Cyclic voltammetry and in-depth X-ray photoelectron spectroscopy of the deposits suggest that the electrodeposition of rare earth metals could undergo a Li-mediated reduction process. Finally, quantitative analysis of the deposits reveals that the overall concentration of the rare earth elements reaches 75% which contains 40–48% metallic phase.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Scalable Synthesis and Characterization of Multilayer γ-Graphyne, New Carbon Crystals with a Small Direct Band Gap

γ-Graphyne is the most symmetric sp 2 /sp 1 allotrope of carbon, which can be viewed as graphene uniformly expanded through the insertion of two-carbon acetylenic units between all the aromatic rings. To date, synthesis of bulk γ-graphyne has remained a challenge. In this work, we report the synthesis of multilayer γ-graphyne through crystallization-assisted irreversible cross-coupling polymerization. A comprehensive characterization of this new carbon phase is described, including synchrotron powder X-ray diffraction, electron diffraction, lateral force microscopy, Raman spectroscopy, infrared spectroscopy, and cyclic voltammetry. Experiments indicate that γ-graphyne is a 0.48 eV band gap semiconductor, with a hexagonal a-axis spacing of 6.88 Å and an interlayer spacing of 3.48 Å, which is consistent with theoretical predictions. The observed crystal structure has an aperiodic sheet stacking. The material is thermally stable up to 240 °C but undergoes transformation at higher temperatures. While conventional 2D polymerization and reticular chemistry rely on error correction through reversibility, we demonstrate that a periodic covalent lattice can be synthesized under purely kinetic control. The reported methodology is scalable and inspires extension to other allotropes of the graphyne family.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗