Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VOLATILE MATTER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Atomistic origins of CH{sub 3}NH{sub 3}PbI{sub 3} degradation to PbI{sub 2} in vacuum

We study the mechanisms of CH{sub 3}NH{sub 3}PbI{sub 3} degradation and its transformation to PbI{sub 2} by means of X-ray diffraction and the density functional theory. The experimental analysis shows that the material can degrade in both air and vacuum conditions, with humidity and temperature-annealing strongly accelerating such process. Based on ab initio calculations, we argue that even in the absence of humidity, a decomposition of the perovskite structure can take place through the statistical formation of molecular defects with a non-ionic character, whose volatility at surfaces should break the thermodynamic defect equilibria. We finally discuss the strategies that can limit such phenomenon and subsequently prolong the lifetime of the material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Biochemical Conversion of Herbaceous Biomass to Renewable Diesel: Net Greenhouse Gas and Air Pollutant Trade-offs

This study examines greenhouse gas (GHG) and criteria air pollutant (CAP) emissions trade-offs for renewable diesel across 12 scenarios, involving different biochemical conversion designs, biorefinery scales, and feedstocks. A conventional design uses lignin for on-site heat and power, which exports excess power to the grid. An alternative design exports lignin pellets, offsetting other pellet production methods but requiring grid electricity to meet biorefinery power demands. Net emissions were quantified in Iowa and Georgia, selected considering feedstock availability, coproduct displacement, and regional power grids, assuming grid-exported power avoids coal or low-carbon electricity. Results for the conventional design remained consistent across the electricity displacement scenarios. When comparing lignin utilization strategies, pelletizing lignin reduces sulfur dioxide, carbon monoxide, nitrogen oxides, and volatile organic compounds (net emissions –0.66 mg MJ –1 , 25 mg MJ –1 , 25 mg MJ –1 , 7.8 mg MJ –1 , respectively). However, lignin pelletization increases net particulate matter (fine and coarse) and ammonia (net emissions of 4.7 mg MJ –1 , 13 mg MJ –1 , and 0.26 mg MJ –1 , respectively), alongside indirect GHG emissions due to grid electricity dependence. Additionally, processing 2000 tonnes corn stover daily minimizes emissions for both designs. Only lignin pelletization with renewable electricity and additional particulate matter and ammonia controls reduces all CAP and GHG emissions simultaneously.

09 BIOMASS FUELS↗

Aerosol characteristics and particle production in the upper troposphere over the Amazon Basin

Airborne observations over the Amazon Basin showed high aerosol particle concentrations in the upper troposphere (UT) between 8 and 15 km altitude, with number densities (normalized to standard temperature and pressure) often exceeding those in the planetary boundary layer (PBL) by 1 or 2 orders of magnitude. The measurements were made during the German–Brazilian cooperative aircraft campaign ACRIDICON–CHUVA, where ACRIDICON stands for Aerosol, Cloud, Precipitation, and Radiation Interactions and Dynamics of Convective Cloud Systems and CHUVA is the acronym for Cloud Processes of the Main Precipitation Systems in Brazil: A Contribution to Cloud Resolving Modeling and to the GPM (global precipitation measurement), on the German High Altitude and Long Range Research Aircraft (HALO). The campaign took place in September–October 2014, with the objective of studying tropical deep convective clouds over the Amazon rainforest and their interactions with atmospheric trace gases, aerosol particles, and atmospheric radiation. Aerosol enhancements were observed consistently on all flights during which the UT was probed, using several aerosol metrics, including condensation nuclei (CN) and cloud condensation nuclei (CCN) number concentrations and chemical species mass concentrations. The UT particles differed sharply in their chemical composition and size distribution from those in the PBL, ruling out convective transport of combustion-derived particles from the boundary layer (BL) as a source. The air in the immediate outflow of deep convective clouds was depleted of aerosol particles, whereas strongly enhanced number concentrations of small particles (< 90 nm diameter) were found in UT regions that had experienced outflow from deep convection in the preceding 5–72 h. We also found elevated concentrations of larger (> 90 nm) particles in the UT, which consisted mostly of organic matter and nitrate and were very effective CCN. Our findings suggest a conceptual model, where production of new aerosol particles takes place in the continental UT from biogenic volatile organic material brought up by deep convection and converted to condensable species in the UT. Subsequently, downward mixing and transport of upper tropospheric aerosol can be a source of particles to the PBL, where they increase in size by the condensation of biogenic volatile organic compound (BVOC) oxidation products. This may be an important source of aerosol particles for the Amazonian PBL, where aerosol nucleation and new particle formation have not been observed. We propose that this may have been the dominant process supplying secondary aerosol particles in the pristine atmosphere, making clouds the dominant control of both removal and production of atmospheric particles.

54 ENVIRONMENTAL SCIENCES↗

Study of resistive switching and magnetism modulation in the Pt/CoFe{sub 2}O{sub 4}/Nb:SrTiO{sub 3} heterostructures

CoFe{sub 2}O{sub 4} (CFO) thin films are epitaxially grown on Nb doped (001) SrTiO{sub 3} (NSTO) single-crystal substrates by pulsed laser deposition to form Pt/CFO/NSTO heterostructures. These heterostructures exhibit typical bipolar resistive switching effect with maximum switching ratio of 5 × 10{sup 4}, multi-level resistance states, excellent retention, and anti-fatigue properties. When the resistance states of the heterostructures are switched between low resistance state and high resistance state upon applying bias voltages, the saturation magnetization of the CFO films shows corresponding changes associated with the resistive switching. These close correlations between the resistive switching and the magnetization can be attributed to the electrons filling into and releasing from the defect energy levels introduced by oxygen vacancies in the CFO film. These results show potential application in the multi-functional magnetoelectric sensor and non-volatile multi-level resistive switching memory.

36 MATERIALS SCIENCE↗

{beta}-Ga{sub 2}O{sub 3} growth by plasma-assisted molecular beam epitaxy

The authors demonstrate the heteroepitaxial and homoepitaxial growth of single crystalline {beta}-Ga{sub 2}O{sub 3} by plasma-assisted molecular beam epitaxy. Phase-pure (201) and (100) {beta}-Ga{sub 2}O{sub 3} thin films were grown on c-plane sapphire and (100) {beta}-Ga{sub 2}O{sub 3} substrates, respectively. Based on the homoepitaxial results, detailed information is reported on the dependence between the {beta}-Ga{sub 2}O{sub 3} film quality and various growth parameters. At an optimized growth temperature of 700 deg. C, a growth relationship between growth rates and increasing gallium fluxes was established at a fixed oxygen pressure. A three-dimensional columnar growth with a relatively high growth rate was measured at a low gallium flux while a terrace surface morphology with a reduced growth rate was observed as the gallium flux increased. The gallium flux played an important role on both surface morphology and growth rate. We associated the decreasing growth rate with increasing gallium flux with the formation of gallium suboxides monitored by quadrupole mass spectrometry. The formation and desorption of volatile gallium suboxides limited the resulting growth rate of {beta}-Ga{sub 2}O{sub 3} growth.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ferroelectric gate effect in modulation doped CdTe/CdMgTe quantum wells

We show an effective control of the carrier concentration confined in a modulation doped CdTe quantum well caped by a ferroelectric CdZnTe gate. The 2DEG concentration can by permanently changed by changing the direction of the build-in electric field of the ferroelectric CdZnTe gate. The concentration of the 2DEG changes by 30% upon a poling of the gate. The effect is reproducible. It can be employed in non-volatile memories.

36 MATERIALS SCIENCE↗

High-pressure Raman spectroscopy of phase change materials

We used high-pressure Raman spectroscopy to study the evolution of vibrational frequencies of the phase change materials (PCMs) Ge{sub 2}Sb{sub 2}Te{sub 5}, GeSb{sub 2}Te{sub 4}, and SnSb{sub 2}Te{sub 4}. We found that the critical pressure for triggering amorphization in the PCMs decreases with increasing vacancy concentration, demonstrating that the presence of vacancies, rather than differences in the atomic covalent radii, is crucial for pressure-induced amorphization in PCMs. Compared to the as-deposited amorphous phase, the pressure-induced amorphous phase has a similar vibrational spectrum but requires much lower laser power to transform into the crystalline phase, suggesting different kinetics of crystallization, which may have implications for applications of PCMs in non-volatile data storage.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The effect of temperature, storage time and collection method on biomethane potential of source separated household food waste

Highlights: • Experiments to mimic storage of OFMSW performed in laboratory scale at 6 and 22 °C. • A recipe representative for OFMSW from households in Sweden was designed. • Clear signs of degradation for OFMSW stored at 22 °C with respect to time. • Higher loss of VS and H{sub 2}O for OFMSW in paper bags compared to plastic bags at 22 °C. - Abstract: The aim of this study was to mimic real conditions for storage and transport and to evaluate how much of the biomethane potential is lost before the organic fraction of municipal solid waste (OFMSW) from households in Sweden reaches the biogas plant. The laboratory biomethane potential (BMP) experiments was carried out with respect to the storage time, collection method (paper or plastic bag) and storage temperature (22 °C and 6 °C) in order to evaluate the effect of these factors on the biomethane potential. A recipe representative for OFMSW from households in Sweden was designed with the help of literature and modification of recipes from technical reports and scientific literature. Laboratory experiments showed that the difference in the BMP of OFMSW stored in plastic- compared to paper bags were obvious at 22 °C with a lower biomethane potential for paper bags, but there was no difference at 6 °C. Provided that the loss of organic matter during pre-treatment is equivalent for both paper and plastic bags it is possible to get more biomethane from OFMSW collected in plastic bags during the warmest part of the year, since they have a more preservative effect on OFMSW than paper bags. This could be explained by the plastic bags being denser than paper and therefore maintain the volatile organic compounds inside the bag and promote a pre-hydrolysis of the material rather than aerobic degradation.

09 BIOMASS FUELS↗

Quantification of gas emissions from stored softwood chips as solid biofuels

Western Red Cedar (WRC) is one of the abundant softwood species, which is considered as a good source of biofuel. This paper aims at quantifying gas emissions from stored WRC woodchips and studying the potential health impact during storage and transportation. Experiments were conducted using lab-scale reactors for a range of temperatures under both non-aerobic and aerobic conditions depending on oxygen level. Results from tests using non-aerobic reactors showed that the highest carbon dioxide emission factor of 2.8 g/kg dry matter (DM) was observed at 20 A degrees C for a storage period of 2 months. Although the carbon monoxide emission factor was much lower at 0.03 g/kg DM, it increased with increasing temperatures due to chemical oxidation. Carbon dioxide and carbon monoxide emissions from the aerobic reactors exhibited similar trends as the non-aerobic reactors with respect to the effect of temperature. Total gas emissions were higher from the aerobic reactors compared with those from non-aerobic reactors. Results from the qualitative gas chromatography-mass spectrometry analysis indicated a range of volatile organic compounds was emitted from the stored WRC woodchips. Some of these volatile organic compounds might be associated with the characteristic pungent smell of WRC which could cause odor nuisance to the neighboring community. Here, the total volatile organic compounds concentration was found to be positively correlated with temperature. At the end of the storage period, percent DM loss was below 1 % for both the non-aerobic and aerobic reactors, reaffirming the decay-resistance characteristics of WRC.

09 BIOMASS FUELS↗

Quasi-unipolar pentacene films embedded with fullerene for non-volatile organic transistor memories

Quasi-unipolar non-volatile organic transistor memory (NOTM) can combine the best characteristics of conventional unipolar and ambipolar NOTMs and, as a result, exhibit improved device performance. Unipolar NOTMs typically exhibit a large signal ratio between the programmed and erased current signals but also require a large voltage to program and erase the memory cells. Meanwhile, an ambipolar NOTM can be programmed and erased at lower voltages, but the resulting signal ratio is small. By embedding a discontinuous n-type fullerene layer within a p-type pentacene film, quasi-unipolar NOTMs are fabricated, of which the signal storage utilizes both electrons and holes while the electrical signal relies on only hole conduction. These devices exhibit superior memory performance relative to both pristine unipolar pentacene devices and ambipolar fullerene/pentacene bilayer devices. The quasi-unipolar NOTM exhibited a larger signal ratio between the programmed and erased states while also reducing the voltage required to program and erase a memory cell. This simple approach should be readily applicable for various combinations of advanced organic semiconductors that have been recently developed and thereby should make a significant impact on organic memory research.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A model for thermal oxidation of Si and SiC including material expansion

A model based on drift-diffusion-reaction kinetics for Si and SiC oxidation is discussed, which takes the material expansion into account with an additional convection term. The associated velocity field is determined self-consistently from the local reaction rate. The approach allows a calculation of the densities of volatile species in an nm-resolution at the oxidation front. The model is illustrated with simulation results for the growth and impurity redistribution during Si oxidation and for carbon and silicon emission during SiC oxidation. The approach can be useful for the prediction of Si and/or C interstitial distribution, which is particularly relevant for the quality of metal-oxide-semiconductor electronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On volatile element trends in gas-rich meteorites

Study of 10 volatile elements (and non-volatile Co) in co-existing light and dark portions of 6 gas-rich chondrites indicates patterns of distinct but non-uniform enrichment of volatile elements. Only Cs is enriched in all samples; Bi and Tl enrichments covary. The observed enrichments are inconsistent with prior suggestions of admixture of C1 or C2 chondritic matter, whether pristine or partly devolatilized, but suggest that both light and dark portions of each chondrite represents a compositionally more extended sampling of parental nebular material than hitherto known.

Bart, G.↗

Carbon XANES Data from Six Aerogel Picokeystones Cut from the Top and Bottom Sides of the Stardust Comet Sample Tray

Great care and a large effort was made to minimize the amount of organic matter contained within the flight aerogel used to collect Comet 81P/Wild 2 samples. Even so, by the very nature of the production process and silica aerogel s affinity for volatile organics keeping silica aerogel free from organics is a monumental task. Silica aerogel from three production batches was flown on the Stardust sample return mission. All 3 types had layered densities varying from 5mg/ml to 50 mg/ml where the densest aerogel was farthest away from the collection area. A 2 step gelation process was used to make the flight aerogel and organics used in this process were tetraethylorthosilicate, ethanol and acetonitrile. Both ammonium hydroxide and nitric acid were also used in the aerogel production process. The flight aerogel was baked at JPL at 300 C for 72 hours, most of the baking was done at atmosphere but twice a day the oven was pumped to 10 torr for hour [1]. After the aerogel was baked it was stored in a nitrogen purged cabinet until flight time. One aerogel cell was located in the SRC away from any sample collection area as a witness to possible contamination from out gassing of the space craft, re-entry gases and any other organic encounter. This aerogel was aerogel used in the interstellar collection sample tray and is the least dense of the 3 batches of aerogel flown. Organics found in the witness tile include organics containing Si-CH3 bonds, amines and PAHS. Besides organic contamination, hot spots of calcium were reported in the flight aerogel. Carbonates have been detected in comet 81P/Wild2 samples . During preflight analyses, no technique was used to analyze for carbonates in aerogel. To determine if the carbonates found in 81P/Wild2 samples were from the comet, it is necessary to analyze the flight aerogel for carbonate as well as for organics.

Wirick, S.↗

Environmental monitoring of secondhand smoke exposure

The complex composition of secondhand smoke (SHS) provides a range of constituents that can be measured in environmental samples (air, dust and on surfaces) and therefore used to assess non-smokers’ exposure to tobacco smoke. Monitoring SHS exposure (SHSe) in indoor environments provides useful information on the extent and consequences of SHSe, implementing and evaluating tobacco control programmes and behavioural interventions, and estimating overall burden of disease caused by SHSe. The most widely used markers have been vapour-phase nicotine and respirable particulate matter (PM). Numerous other environmental analytes of SHS have been measured in the air including carbon monoxide, 3-ethenylpyridine, polycyclic aromatic hydrocarbons, tobacco-specific nitrosamines, nitrogen oxides, aldehydes and volatile organic compounds, as well as nicotine in dust and on surfaces. The measurement of nicotine in the air has the advantage of reflecting the presence of tobacco smoke. While PM measurements are not as specific, they can be taken continuously, allowing for assessment of exposure and its variation over time. In general, when nicotine and PM are measured in the same setting using a common sampling period, an increase in nicotine concentration of 1 mg/m 3 corresponds to an average increase of 10 mg/m 3 of PM. This topic assessment presents a comprehensive summary of SHSe monitoring approaches using environmental markers and discusses the strengths and weaknesses of these methods and approaches.

60 APPLIED LIFE SCIENCES↗

Impact of time and space evolution of ion tracks in nonvolatile memory cells approaching nanoscale

Swift heavy ions impacting on matter lose energy through the creation of dense tracks of charges. The study of the space and time evolution of energy exchange allows understanding the single event effects behavior in advanced microelectronic devices. In particular, the shrinking of minimum feature size of most advanced memory devices makes them very interesting test vehicles to study these effects since the device and the track dimensions are comparable; hence, measured effects are directly correlated with the time and space evolution of the energy release. In this work we are studying the time and space evolution of ion tracks by using advanced non volatile memories and Monte Carlo simulations. Experimental results are very well explained by the theoretical calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ferroelectric switching of poly(vinylidene difluoride-trifluoroethylene) in metal-ferroelectric-semiconductor non-volatile memories with an amorphous oxide semiconductor

Ferroelectric polarization switching of poly(vinylidene difluoride-trifluoroethylene) is investigated in different thin-film device structures, ranging from simple capacitors to dual-gate thin-film transistors (TFT). Indium gallium zinc oxide, a high mobility amorphous oxide material, is used as semiconductor. We find that the ferroelectric can be polarized in both directions in the metal-ferroelectric-semiconductor (MFS) structure and in the dual-gate TFT under certain biasing conditions, but not in the single-gate thin-film transistors. These results disprove the common belief that MFS structures serve as a good model system for ferroelectric polarization switching in thin-film transistors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Room-temperature polarization switching and antiferromagnetic coupling in epitaxial (Ga,Fe){sub 2}O{sub 3}/SrRuO{sub 3} heterostructures

Room-temperature reversible remnant polarization of gallium ferrite thin-films is reported as a multiferroic material with non-zero order parameters of polarization and magnetization. With the addition of Fe ions in Ga sites, Ga{sub 0.6}Fe{sub 1.4}O{sub 3} (GFO) thin films have been considered as potentially promising of multiferroicity. The b-axis oriented epitaxial GFO films were grown on SrRuO{sub 3}(111)/SrTiO{sub 3}(111). The six-fold symmetric in-plane epitaxy of the GFO films was confirmed using X-ray diffraction. The magnetic moment of the films was measured as a function of temperature and external magnetic field, which shows a room-temperature non-zero magnetization. Macroscopic and microscopic methods have been applied to demonstrate the polarization switching of the films. The remnant polarization is measured as 0.05 μC/cm{sup 2}. Reduction of leaky behaviors of the GFO films owing to the conducting oxide of SrRuO{sub 3} will pave a way to take advantage of the room-temperature non-zero multi-orders for future non-volatile memory device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The carbon chemistry of meteorites: Relationships to comets

The carbonaceous meteorites exhibiting alteration by liquid water bear a strong relationship to comets. Not only is their elemental composition closer to solar in relative abundances than other meteorites, they are water rich; and they contain isotopic compositions among refractory and volatile elements indicative of presolar components. Some of these isotopic anomalies occur in organic compounds and carbonaceous grains signifying the presence of discrete and identifiable carbon components derived from interstellar and circumstellar matter. Insofar as comets and meteorites are ultimately formed from interstellar gas and dust, and comets have been subjected to considerably less aqueous and thermal evolution than carbonaceous meteorites, the interstellar imprint should be much stronger and better preserved in comets.

Chang, S.↗