Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Tuning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Tuning counterion chemistry to reduce carrier localization in doped semiconducting carbon nanotube networks

Understanding and controlling the impact that electrostatic interactions have on the transport of injected charge carriers is important for the utilization of pi-conjugated semiconductors in opto-electronic applications. Here, we explore the impact of dopant chemical and electronic structure on the doping efficacy and charge carrier transport in semiconducting single-walled carbon nanotube (s-SWCNT) networks using molecular charge-transfer dopants based on functionalized icosahedral dodecaborane (DDB) clusters. Calculations indicate that localization of electron density on the DDB core reduces the coulombic interactions that contribute to hole localization in the s-SWCNTs, thereby improving charge carrier transport. The enhanced delocalization produces an increase in the electrical conductivity and thermopower at lower charge carrier densities, yielding enhanced thermoelectric transport and a thermoelectric power factor that surpasses the previous best in class for enriched s-SWCNT thin-film networks. This strategy can be applied broadly across pi-conjugated semiconductors to tune and enhance performance in a variety of energy harvesting devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Near-IR Luminescence Tuning in a Series of Chalcogenophene Carboxylate-Decorated Neodymium Dimers

Here, the solvothermal synthesis of a series of Nd dimers decorated with various chalcogenophene carboxylates and 2,2':6',2"-terpyridine of the general formula, [Nd 2 (µ-XC 5 H 3 O 2 ) 2 (XC 5 H 3 O 2 ) 4 (N 3 C 15 H 11 ) 2 (H 2 O) 2 ] where X = O, S, Se, and Te, is reported. The solid-state structures were characterized using single-crystal X-ray diffraction (scXRD) and all the complexes are isomorphous, despite substitution of the heterocyclic chalcogen; phase purity was confirmed via powder X-ray diffraction (pXRD). Vibrational spectroscopy was collected and correlations between chalcogen identity and the binding strength of the carboxylate groups of the chalcogenophene ligands with each metal center were shown to be independent of chalcogen identity. All four complexes displayed Nd(III)-based near-IR luminescence and exhibited ligand-sensitized emission. Varying the chalcogenophene chromophore enabled tuning of the sensitizing triplet state energy level, as evidenced by an 8-fold increase in the sensitization of the TeCA-decorated dimer relative to the other chalcogenophene congeners. This behavior was rationalized by comparing the Nd(III) acceptor and ligand donor states across the series. The donor triplet state of each ligand was estimated via low-temperature (77 K) phosphorescence measurements from 1:1 mixtures with Gd(III); these were found to be 24,631 cm –1 for furan-2-carboxylic acid (FCA), 23,764 cm –1 for thiophene-2-carboxylic acid (TCA), 22,548 cm –1 for selenophene-2-carboxylic acid (SeCA), and 21,186 cm –1 for tellurophene-2-carboxylic acid (TeCA). The greater sensitization efficiency of TeCA is the result of well-matched ligand donor and metal acceptor levels and thus suppression of nonradiative back-energy transfer. More broadly, triplet energy level information for these ligands serves as a guide for future application to other target metals based on the electronic properties necessary to effect efficient sensitization.

Coordination Chemistry↗
DOE OSTI2020

Postsynthetic Oxidation of the Coordination Site in a Heterometallic Metal-Organic Framework: Tuning Catalytic Behaviors

Postsynthetic modification (PSM) in metal-organic frameworks (MOFs) can introduce multiple functionalities and alter the structural function for the desired application. However, the PSM of the coordination site faces the challenges of structural collapse or incompatibility between the original metal site and the newly formed coordination group. Herein, we developed a novel concept of introducing “primary” and “secondary” nodes, coexisting in a water-stable, Zr-based heterometallic MOF, [Zr6(µ3-OH)8(OH)8][CuI4(L1)4]2 (1-SH-a, H2L1 = 6-mercaptopyridine-3-carboxylic acid). The post-synthetic oxidation at the coordination site was successfully achieved in the “secondary” nodes [CuI4(L1)4]4-, while the robust “primary” nodes [Zr6(µ3-OH)8(OH)8]8+ stabilized the whole framework to form [Zr6(µ3-OH)8(OH)8][(CuI0.44CuII0.56(OH)0.56)4(L2)4]2 (1-SO3H, H2L2 = 6-sulfonicotinic acid). PSM of 1-SH-a to form 1-SO3H dramatically tuned the catalytic properties toward the styrene oxide ring-opening reaction to give a regioselectivity of primary alcohol (A) of ~99% compared with 1-SH-a (~71%).

Han, Yi↗
DOE OSTI2020

Tuning the Mechanical Properties of a Polymer Semiconductor by Modulating Hydrogen Bonding Interactions

Conjugation breakers (CBs) with different H-bonding chemistry and linker flexibility are designed and incorporated into a Diketopyrrolopyrrole (DPP)-based conjugated polymer backbone. The effects of H-bonding interactions on polymer semiconductor morphology, mechanical properties and electrical performance are systematically investigated. We observe that CBs with H-bonding self-association constant >0.7 or denser packing tendency are able to induce higher polymer chain aggregation and crystallinity in as-casted thin film, resulting in higher modulus and crack on-set strain. Additionally, the rDoC (relative degree of crystallinity) of the stretched thin film with the highest crack on-set strain only suffers a small decrease, suggesting the main energy dissipation mechanism is the breakage of H-bonding interactions. By contrast, other less stretchable polymer films dissipate strain energy through the breakage of crystalline domains, indicated by drastic decrease in rDoC. Furthermore, we evaluate their electrical performance under mechanical strain in fully stretchable field-effect transistors. The polymer with the highest crack on-set strain has the least degradation in mobility as a function of strain. Overall, these observations suggest that we can aptly tune the mechanical properties in polymer semiconductors by modulating intermolecular interactions, such as H-bonding chemistry and linker flexibility. Such understanding provides molecular design guidelines for future stretchable semiconductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Ligand-Dependent Tuning of Interband and Intersubband Transitions of Colloidal CdSe Nanoplatelets

Although surface ligands of colloidal nanocrystals are known to adjust the absolute energy levels of valence and conduction bands of semiconductor nanocrystals, they typically have only minor influence on the band gap or effective masses. This changes in nanoplatelets. Ligand exchange of CdSe colloidal nanoplatelets induces large (up to 300 meV) bathochromic shifts of both interband and intersubband transitions. Here, three families of ligands-halides, thiolates, and phosphonates-are used to tune interband transitions, reflecting electron and hole confinement, across visible wavelengths and intersubband transitions, reflecting electron confinement, across the near-infrared spectral window. Furthermore, careful examination shows that delocalization from expansion of the nanoplatelet short axis, which was reported previously, cannot alone explain observed red shifts. Instead, comparison of intersubband, interband, and hole energy levels shows that ligand head group chemistry confers specific, idiosyncratic adjustments of the contribution of conduction and valence bands to the observed bathochromic shifts. Phosphonate ligands show the largest band gap reductions but the smallest red shift of intersubband transition energies; halide-exchanged samples displayed smaller reductions in band gap but large red shifts of intersubband transitions; thiolates fall in between. A related specificity is observed in hole states, which implicates ligand-responsive valence band curvature as an additional contribution driving optical changes. For nanoplatelets, surface ligand chemistry offers not only a tool to adjust the absolute energy level of conduction and valence bands but also an alternative route to preferential electron or hole band engineering that is normally achieved with inorganic shells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Mixed-Valent Copper Chalcogenides: Tuning Structures and Electronic Properties Using Multiple Anions

A series of mixed-anion copper chalcogenides have been prepared using solid-state methods including ACu 4.2 TeS 2 (A = K, Rb, Cs), which adopt the KCu 4 S 3 structure type. The mixedanion motif has an expanded sublattice, relative to KCu 4 S 3 , that can accommodate additional Cu atoms at its interstitial sites that are unoccupied in the parent structure. The variable temperature transport shows that the materials are p-type metals with carrier densities on the order of 10 21 cm -3 and room-temperature electrical conductivity as high as 4000 S cm -1 . Band structures calculated using density functional theory corroborate the experimental data and indicate that the interstitial Cu atoms lower the carrier concentration and increase the Fermi level of the materials. The layered structure has Te and S atoms occupying unique sites within the ACu 4.2 TeS 2 structure, where relatively hard S 2- anions prefer Wyckoff positions where they can form energetically favorable acid-base interactions with hard alkali cations. The phenomenon is observed in the related K 3 Cu 8 Te 2 S 4 system, which also has a fully ordered layered structure. Here, we believe that the report provides new chemical guidelines for targeting ordered multianion structures, as well as a unique method for tuning the electronic properties of metallic chalcogenides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Controlling the Ru Island Decoration on Ni Nanoparticles to Tune the Activity for 5-Hydroxylmethylfurfural (HMF) Oxidation

Controlling the island decoration on metal nanoparticle supports is a major opportunity for improving the catalytic activity and an attractive synthetic challenge. The structure of the decorating metal determines how it interacts with the metal support and how it effectively catalyzes the reactants and the intermediates. In this work, we demonstrate that a slow-growth method maximizes the formation of Ru islands on faceted, branched Ni nanoparticles, thereby controlling the number of Ru–Ni atomic interactions and improving the catalytic activity. The Ru islands on branched Ni nanoparticles with the highest loading of Ru (9%) exhibited the highest activity for the electro-oxidation of biomass-derived 5-hydroxymethylfurfural (HMF). In conclusion, these results demonstrate the ability to synthetically control the second metal decoration to tune metal–support interactions, thereby enhancing the catalytic activity.

5-hydroxymethylfurfural↗
DOE OSTI2020

From Waste-Heat Recovery to Refrigeration: Compositional Tuning of Magnetocaloric Mn 1+ x Sb

Magnetic refrigeration, as well as waste-heat recovery, can be accomplished through the magnetocaloric effect, where temperature changes the magnetic state of a material or vice versa. Promising magnetocaloric materials display large changes in magnetic entropy (ΔS M ) upon application of a moderate magnetic field and are often associated with magnetic materials possessing some degree of magnetostructural coupling. In such compounds, the magnetic transition is coupled to some structural transition at the ordering temperature, and indicators for these are readily calculated by the magnetic deformation proxy Σ M . MnSb, with a Curie temperature T C = 577 K, has a calculated magnetic deformation of Σ M = 5.9% and is a promising candidate material for waste-heat recovery. The temperature dependence of structural, magnetic, and magnetocaloric properties of Mn 1+ x Sb, where $x$ is a tunable amount of interstitial Mn, is studied here. specifically, excess Mn is incorporated as an interstitial whose magnetic moment is antialigned with the stoichiometric Mn, and the excess Mn has the effect of lowering T C , such that the Curie temperature can be tuned from 577 K to nearly room temperature at 318 K for $x$ = 0.2. For $x$ = 0.0, 0.1, and 0.2, values of ΔS M under a maximum magnetic field $H$ = 5 T are found to be 3.65, 3.00, and 2.83 J K -1 kg -1 , respectively. While the maximum ΔS M decreases with $x$, the high refrigerant capacity a more holistic measure of performance-is retained in this highly tunable system.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Tuning the Morphology and Electronic Properties of Single-Crystal LiNi 0.5 Mn 1.5 O 4-δ : Exploring the Influence of LiCl–KCl Molten Salt Flux Composition and Synthesis Temperature

Single-crystal materials have played a unique role in the development of high-performance cathode materials for Li batteries due to their favorable chemomechanical stability. The molten salt synthesis method has become one of the most prominent techniques used to synthesize single-crystal layered and spinel materials. In this work, the molten salt synthesis method is used as a technique to tune both the morphology and Mn 3+ content of high-voltage LiNi 0.5 Mn 1.5 O 4 (LNMO) cathodes. The resulting materials are thoroughly characterized by a suite of analytical techniques, including synchrotron X-ray core-level spectroscopy, which are sensitive to the material properties on multiple length scales. Furthermore, the multidimensional characterization allows us to build a materials library according to the molten salt phase diagram as well as to establish the relationship among synthesis, material properties, and battery performance. The results of this work show that the Mn 3+ content is primarily dependent on the synthesis temperature and increases as the temperature is increased. Additionally, the particle morphology is mostly dependent on the composition of the molten salt flux, which can be tailored to obtain well-defined octahedrons enclosed by (111) facets, plates with predominant ($11\tilde{2}$) facets, irregularly shaped particles, or mixtures of these. The electrochemical measurements indicate that the Mn 3+ content has a larger contribution to the battery performance of LNMO than do morphological characteristics and that a significant amount of Mn 3+ could become detrimental to the battery performance. However, with similar Mn 3+ contents, morphology still plays a role in influencing the battery cycle life and rate performance. The insights of molten salt synthesis parameters on the formation of LNMO, with deconvolution of the roles of Mn 3+ and morphology, are crucial to continuing studies in the rational design of LNMO cathode materials for high-energy Li batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Tuning the Structural and Magnetic Properties in Mixed Cation Mn x Co 2– x P 2 S 6

The metal thiophosphates (MTP), M 2 P 2 S 6, are a versatile class of van der Waals materials, which are notable for the possibility of tuning their magnetic properties with the incorporation of different transition-metal cations. Further, they also offer opportunities to probe the independent and synergistic role of the magnetically active cation sublattice when coupled to P 2 Q 6 polyhedra. Herein, we report the structural, magnetic, and electronic properties of the series of MTPs, Mn x Co 2– x P 2 S 6 ( x = 0.25, 0.5, 1, 1.5, 1.75) synthesized by the P 2 S 5 flux method. In this work, structural and elemental analysis indicates a homogeneous stoichiometry in the Mn x Co 2– x P 2 S 6 compounds. We observe that a correlation is apparent between the intensities of specific Raman modes and Raman shifts with respect to the alloying ratio between Mn and Co. Magnetic susceptibility measurements indicate that the alloyed systems adopt an ordered antiferromagnetic (AFM) configuration with a dependence of the Néel temperature on the alloying ratio. A possible magnetic frustration behavior was observed for the composition MnCoP 2 S 6 due to magnetic moment compensation as the alloying ratio between Mn and Co approaches parity. Interestingly, mixed oxidation states of the metal cation species are also observed in Mn x Co 2– x P 2 S 6 along with a linear dependence of the work function on the alloying ratio of Mn and Co.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Cobalt(II) Phthalocyanine Substituents Tune the Electrocatalytic CO 2 Conversion to Methanol

Cobalt phthalocyanine (Co(II)Pc) and its derivatives are promising molecular electrocatalysts for the electrochemical reduction of CO 2 to CO and methanol (CH 3 OH). Despite increasing interest, a detailed mechanistic understanding of how ligand substituents influence catalytic activity, selectivity, and efficiency remains limited. In this study, we employ density functional theory (DFT) to systematically investigate the influence of electron-donating groups (EDGs) and electron-withdrawing groups (EWGs) on the electronic structure and redox properties of the Co(II)Pc electrocatalyst, and to elucidate CO 2 RR mechanistic pathways. Our results reveal that EWGs cause a positive shift in the reduction potentials, favor CO 2 binding over protonation of the Co metal center and promote downstream methanol formation at mild potentials. EDGs show opposite trends including favorable protonation steps, promoting a negative shift in the reduction potential, and facilitating the hydrogen evolution reaction (HER), which competes with the desired CO 2 RR pathway. Notably, CO dissociation is thermodynamically and kinetically unfavorable across all systems, positioning the redox potential versus CO dissociation energy as a key factor for methanol selectivity. Furthermore, these insights provide a predictive framework for rational catalyst design and underscore the critical role of electronic tuning in advancing molecular electrocatalysts for sustainable CO 2 conversion.

Alcohols↗
DOE OSTI2026

Compositional Tuning of Magnetic Properties in a Series of Transition Metal Site-Deficient UCo x Bi 2 and UNi x Bi 2 Phases

Varying the electronic structure of topological materials through aliovalent substitution is a primary approach to tuning their physical properties. Unlike substitution, metal site deficiency intrinsic to some structure types, including HfCuSi 2 -type, has rarely been employed for controlling the properties of topological phases. In this report, we describe the synthesis and characterization of two new series of compounds, UCoxBi 2 and UNixBi 2 , which demonstrate the variation of transition metal content through synthetic conditions. Magnetic measurements reveal the dependence between the extent of transition metal incorporation and the magnetism of the resulting phase. DFT calculations demonstrated the ability to model their formation and predict the stability ranges of transition metal-site deficient compounds.

Crystal structure↗
DOE OSTI2022

Enhancing CO Oxidation Activity via Tuning a Charge Transfer Between Gold Nanoparticles and Supports

Charge transfer from the supports to nanoparticles at the interface is one of the key factors to determine the catalytic performances of supported nanoparticles. In this work, we revealed that the charge transfer from semiconductor support to Au nanoparticle catalysts enhanced their activity toward CO oxidation. In this work, a novel Au/SiO 2 /Si composite system with precisely controllable SiO 2 layer thickness was fabricated to tune the magnitude of interfacial charge transfer. With the support of X-ray photoelectron spectroscopy and numerical simulations, it was demonstrated that the Schottoky barrier formed across the Au/SiO 2 /Si heterojunction led to negative charge accumulation at the surface of Au nanoparticles, which may be transferred to the antibonding orbitral of adsorbed O 2 molecules to the O-O bonds. This discovery highlights a new perspective in explaining the role of strong metal-support interactions for catalytic reactions and provides a fresh path for designing the next generation of nanocatalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Tuning Strong Metal–Support Interaction Kinetics on Pt-Loaded TiO 2 (110) by Choosing the Pressure: A Combined Ultrahigh Vacuum/Near-Ambient Pressure XPS Study

Pt catalyst particles on reducible oxide supports often change their activity significantly at elevated temperatures due to the strong metal–support interaction (SMSI), which induces the formation of an encapsulation layer around the noble metal particles. However, the impact of oxidizing and reducing treatments at elevated pressures on this encapsulation layer remains controversial, partly due to the “pressure gap” between surface science studies and applied catalysis. In the present work, we employ synchrotron-based near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) to study the effect of O 2 and H 2 on the SMSI-state of well-defined Pt/TiO 2 (110) catalysts at pressures of up to 0.1 Torr. Further, by tuning the O 2 pressure, we can either selectively oxidize the TiO 2 support or both the support and the Pt particles. Catalyzed by metallic Pt, the encapsulating oxide overlayer grows rapidly in 1 × 10 –5 Torr O 2 , but orders of magnitude less effectively at higher O 2 pressures, where Pt is in an oxidic state. While the oxidation/reduction of Pt particles is reversible, they remain embedded in the support once encapsulation has occurred.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Tuning Self-Assembly of Gold Nanoparticles Grafted with Charged Polymers by Varying Temperature and Electrolytes

Here, we report on the assembly of gold nanoparticles (AuNPs, 5 and 10 nm core diameters) grafted with poly(ethylene glycol) (PEG) terminated with either positively (–NH 2 ) or negatively charged (–COOH) end groups. We employ synchrotron-based small-angle X-ray scattering (SAXS) techniques to investigate the effect of electrolytes and temperature on the assembly and crystallization behavior of these grafted AuNPs. Our studies reveal that –NH 2 -grafted AuNPs spontaneously assemble into a layered hexagonal structure that deteriorates upon adding K 2 CO 3 to the suspension. The hexagonal structure recovers after heating the same suspension above 60 °C. On the other hand, the COOH-terminated AuNPs remain dispersed in the suspensions and assemble and crystallize into a face-centered cubic structure only in the presence of K 2 CO 3 at temperatures above 60 °C. Varying the pH of the –NH 2 -terminated AuNP suspensions induces short-range order (SRO) structures with a single characteristic length scale that shrinks upon heating. Similarly, SRO for the –COOH-terminated AuNP is realized only by lowering the pH. This study demonstrates the use of electrolytes and temperature on the surface charge of grafted AuNPs as knobs to tune self-assembly and crystallization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Tuning Fabrication Factors for Reduced Graphene Oxide Forward Osmosis Membranes

Forward osmosis (FO) may serve as a near-zero energy approach for wastewater management and selective chemical enrichment with an appropriate FO membrane. There is a need for novel FO membranes with better physical stability, chemical compatibility, and enhanced reverse flux selectivity. In this work, we have systematically studied a variety of factors for fabricating thermally reduced graphene oxide (RGO) FO filtration membranes and have demonstrated that with a comparable water flux, the RGO membranes have an exceptionally large reverse flux selectivity with 1.5 M sodium sulfate draw solution, about 7 times larger than that of cellulose triacetate membranes under the same testing condition. The interlayer spacing of the membranes can be fine-tuned by varying temperatures, so that the free interlayer spacing is less than 0.7 nm after exposure to water. The RGO-based membranes offer a few advantages with high reverse flux selectivity, mechanical robustness with strong adhesion to nylong support membranes without damage after FO tests and tape peel tests, and enhanced chromate and chlorine resistance. Finally, we have further demonstrated that in the FO processes, one can concentrate waste brine while simultaneously harvesting the osmotic energy as electricity, offering potential applications of forward osmosis-based osmotic batteries for powering electronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Fundamental Insights into Cathode Stability: Linking Compositional Tuning and Local Coordination in Complex Metal Oxides under Aqueous Transformations

Compositional tuning of complex metal oxides in Li-ion battery materials influences their performance as well as their end-of-life behavior, in particular, the tendency to release toxic metal cations in aqueous solution. We modeled ternary variants of a parent LiCoO 2 delafossite structure by varying the metal identity and relative amounts. This yielded ten model formulations of Li(A 4/6 B 1/6 C 1/6 )O 2 , where the material is enriched with the A metal and doped with B and C, with Ni, Mn, Co, Fe, Al, V, and Ti as constituent metals. To assess their stability in aqueous conditions, metal release energetics were calculated using a combination of Density Functional Theory calculations and thermodynamics. Metal release in ternary oxides is dictated by subtle variations in the coordination environment of the leaving group. To identify governing chemical features across diverse compositions with varying local coordination environments, we leverage random forest regression and descriptor importance analysis. A key result is that metal–oxygen orbital hybridization, quantified using a projected density-of-states-derived descriptor, H d/p , provides a physically grounded measure of interaction strength that governs metal release energetics. This refined perspective goes beyond conventional oxidation state considerations and offers more robust insights for materials science. Finally, we model defect surface-bound O 2 dimer formation as a proxy for reactive oxygen species (ROS) generation. The results show that Ni-rich compositions more readily stabilize spin-polarized O 2 dimers, corroborating experimental reports of an increased ROS-driven biological response. In conclusion, our results establish a compositional and electronic basis for metal release and surface oxygen reactivity that form a rationale for complex metal oxide design principles.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Lineshape Distortions in Internal Reflection Two-Dimensional Infrared Spectroscopy: Tuning across the Critical Angle

Reflection mode two-dimensional infrared spectroscopy (R-2DIR) has recently emerged as a tool that expands the utility of ultrafast IR spectroscopy toward a broader class of materials. The impact of experimental configurations on the potential distortions of the transient reflectance (TR) spectra has not been fully explored, particularly in the vicinity of the critical angle θ c and through the crossover from total internal reflection to partial reflection. Here we study the impact on the spectral lineshape of a dilute bulk solution as θ c is varied across the incident angle by tuning the refractive index of the solvent. We demonstrate the significance of several distortions, including the appearance of phase twisted lineshapes and apparent changes in the spectral inhomogeneity, and show how these distortions impact the interpretation of the TR and R-2DIR spectroscopies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗