Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Tucker”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Investigation of Hierarchical Structure Formation in Merocyanine Photovoltaics

Merocyanines (MCs) are a versatile class of small-molecule dyes. Their optoelectronic properties are easily tunable by chemically controlling their donor–acceptor strength, and their structural properties can be tuned by simple side-chain substitution. This paper demonstrates a novel series of MCs featuring an indoline donor with varying hydrocarbon side-chain length (from 6 to 12 carbons) and a tert-butyl-thiazole acceptor, labeled InTBT. Bulk heterojunction organic photovoltaics are fabricated with a [6,6]-phenyl-C 61 -butyric acid methyl ester (PCBM) acceptor and characterized. Films composed of I8TBT:PCBM and I9TBT:PCBM produced the highest power conversion efficiency of 4.5%, which suggests that the morphology is optimized by controlling the side-chain length. Hierarchical structure formation in InTBT:PCBM films is studied using grazing incidence X-ray diffraction (GIXRD), small-angle neutron scattering (SANS), and atomic force microscopy (AFM). When mixed with PCBM, InTBTs with ≤8 side-chain carbons form pure crystalline domains, while InTBTs with ≥9 side-chain carbons mix well with PCBM. SANS demonstrates that increasing side-chain length increases the InTBT-rich domain size. In addition, a branched hexyl–dodecyl side-chain IHDTBT:PCBM film was studied and found to exhibit the worst-performance organic photovoltaic (OPV) device. The large-branched side chain inhibited mixing between IHDTBT and PCBM resulting in large segregated phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Interfacial Properties of Gold and Cobalt Oxyhydroxide in Plasmon-Mediated Oxygen Evolution Reaction

Water electrolysis is one green approach of storing electrical energy within chemical bonds of the high-energy hydrogen gas (H2). The anodic reaction involved in the oxygen evolution reaction (OER) requires high kinetic overpotential on the overall rate of the process. Recently, plasmonic gold nanoparticles (Au NPs) have been added to enhance the charge transfer at the interface of the OER electrocatalysts and electrolyte under light illumination. However, mechanistic understanding of how Au NPs on the photo-assisted electrochemical process is still lacking. We applied a model system of plasmonic Au electrode and a cobalt (Co)-based OER electrocatalyst in alkaline electrolytes to investigate the plasmon-mediated OER process with (photo)electrochemical and spectroscopic studies. Our results demonstrated that the electrodeposited and surfactant-free plasmonic Au electrode could enhance the electrocatalytic performances of the Co-based electrocatalysts in the OER process with continuous visible and near infrared light illumination. Both the photothermal and energetic charge carriers were found to contribute to the enhanced OER performance based on the transient photocurrent studies, and the interfaces of Au and the Co-based electrocatalysts determined the enhancement mechanisms. The active phase of the cobalt based OER electrocatalyst at operating potentials was identified with electrochemical Raman measurements.

OER↗
DOE OSTI2025

Unveiling the Structure and Dynamics of Water Confined in Colloidal Boehmite Suspensions

Thin fluid layers confined between nanoparticles play an important role in several natural and industrial systems, including radioactive wastes stored in tanks at the U.S. Department of Energy’s Hanford site. Multimodal neutron and computational approaches have been integrated to examine the properties of one, two, and four layers of water (H 2 O or D 2 O) on nanoparticulate, hydrous, or deuterated boehmite (γ-AlOOH or γ-AlOOD). Exposure of deuterated boehmite to H 2 O at 90 °C yielded rapid H/D isotopic exchange likely driven by a Grotthus-like proton-hopping mechanism. The in-plane and out-of-plane vibrations of the structural hydroxyls involved in this exchange were observed for both the hydrated and deuterated boehmite. These observations were confirmed by molecular dynamics simulations that also showed that single water molecules on the (010) surface bond to the structure via four bonds: two from hydrogens (deuteriums) on the water to surrounding oxygens and two from the water’s oxygen to surrounding OD/OH. Bulk water-like properties began to appear once four monolayers of water had been added, but steric crowding limited water diffusion rates once two monolayers had been added. The super-Arrhenius temperature dependence observed at four monolayers indicated glass-like behavior in a well-formed hydrogen-bonding network. Such a network is not sufficiently developed, however, when the surface water coverage is less than four layers. In conclusion, the unique nature of these layers can provide critical information for understanding forces between particles in proximity, and resultant effects on suspension rheology.

Anovitz, Lawrence M. [Oak Ridge National Laborator↗
DOE OSTI2023

Direct Observation of Two-Step, Stratified Crystallization and Morphology in Conjugated Polymer Thin Films

A two-step stratified crystallization process has been directly observed during cooling of poly(3-hexylthiophene) (P3HT) thin films of thickness h = 20-250 nm: a thin (<20 nm) layer at the free surface crystallizes ~25 °C higher than the bulk crystallization temperature (T C,bulk ), whereas the rest of the film (i.e. the underlayer) crystallizes near T C,bulk . In-situ measurements of films with and without a free surface unequivocally ascribe the high-temperature crystallization to a surface-induced process, which correlates with the formation of large birefringent structures and highly oriented edge-on crystallites at the air–polymer interface. In contrast, crystallization of the bulk-like underlayer leads to mostly edge-on-oriented crystallites in thinner films and becomes increasingly isotropic in thicker films. For h < 20 nm, free-surface effects dominate and only high-temperature crystallization is observed. These results highlight the potential of melt crystallization to tailor morphology and orientation across thin film thickness for specific electronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Assessment of Protective Coatings for Metal-Supported Solid Oxide Electrolysis Cells

Green hydrogen is essential to achieving carbon neutrality, and solid oxide electrolysis cells can produce hydrogen using renewable power and waste heat. Insufficient long-term durability of solid oxide electrolysis cells has impeded their commercialization. Here, coatings in the porous stainless steel support of metal-supported solid oxide electrolysis cells (MS-SOECs) are used to dramatically improve their performance and durability. The long-term degradation rate of uncoated MS-SOECs is highly dependent on the current density, with the fastest degradation occurring at the highest current density tested, 0.5 A cm -2 . At this current density, coatings are quite effective. Three protective coatings, Co 3 O 4 deposited by atomic layer deposition (ALD), Co 3 O 4 deposited by electroplating deposition (ED), and CuMn 1.8 O 4 (CMO) deposited by electrophoretic deposition (EPD), are explored to enhance the performance of MS-SOECs with La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 -Sm 0.2 Ce 0.8 O 3 (LSCF-SDC) as the oxygen catalyst and SDC-Ni as the fuel catalyst. The initial average current density at 1.4 V is increased with coatings. It is 0.83 mA cm -2 for the ALD cells, 1.05 mA cm -2 for the ED cells, and 1.13 mA cm -2 for the EPD cells, compared to 0.65 mA cm -2 for the bare cells at 700 °C with 50% H 2 -50% H 2 O. The degradation rate over 1000 h of continuous operation is reduced from 36% to 26%, 27%, and 19% kh -1 with the three coatings, respectively. Furthermore, these improvements are ascribed to reduced Cr poisoning on the oxygen catalyst, which is one of the primary degradation modes for this type of MS-SOEC.

25 ENERGY STORAGE↗
DOE OSTI2021

Click-Chemistry-Based Free Azide versus Azido Sugar Detection Enables Rapid In Vivo Screening of Glycosynthase Activity

Engineering of carbohydrate-active enzymes such as glycosynthases to enable chemoenzymatic synthesis of bespoke oligosaccharides has been limited by the lack of suitable ultrahigh-throughput screening methods capable of robustly detecting either starting substrates or end-products of the glycosidic bond formation reaction. Currently, there are limited screening methods available for rapid and highly sensitive single-cell-based screening of glycosynthase enzymes employing azido sugars as activated donor glycosyl substrates. Here, we report a fluorescence-based approach employing click-chemistry for the selective detection of glycosyl azides as substrates versus free inorganic azides as reaction products that facilitated an ultrahigh-throughput in vivo single-cell-based assay of glycosynthase activity. This assay was developed based on the distinct differences observed in relative fluorescence intensity of the triazole-containing fluorophore product formed during the click-chemistry reaction of organic glycosyl azides versus inorganic azides. This discovery formed the basis for proof of concept validation of a directed evolution methodology for screening and sorting glycosynthase mutants capable of synthesis of targeted fucosylated oligosaccharides. Our screening approach facilitated fluorescence-activated cell sorting of an error-prone polymerase chain reaction-based mutant library of fucosynthases expressed in Escherichia coli to identify several novel mutants that showed increased activity for ß-fucosyl azide-activated donor sugars toward desired acceptor sugars (e.g., pNP-xylose and lactose). Finally, we discuss avenues for improving this proof of concept in vivo assay method to identify better glycosynthase mutants and further demonstrate the broader applicability of this screening methodology for synthesis of bespoke glycans.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Utilizing Site Disorder in the Development of New Energy-Relevant Semiconductors

We report controlling site disorder in ternary and multinary compounds enables tuning optical and electronic properties at fixed lattice constants and stoichiometries, moving beyond many of the challenges facing binary alloy systems. Here, we consider possible enhancements to energy-related applications through the integration of disorder-tunable materials in devices such as light-emitting diodes, photonics, photovoltaics, photocatalytic materials, batteries, and thermoelectrics. However, challenges remain in controlling and characterizing disorder. Focusing primarily on II–IV–V 2 materials, we identify three metrics for experimentally characterizing cation site disorder. Complementary to these experiments, we discuss simulation methods to understand disordered materials. Nonidealities, such as off-stoichiometry and oxygen incorporation, can occur while synthesizing metastable disordered materials. While nonidealities may seem undesirable, we describe how if harnessed they could provide another knob for tuning disorder and subsequently properties. To illustrate the effects of disorder on device-relevant properties, we provide case examples of disordered materials and their potential in device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Scalable Surface Micro-Texturing of LLZO Solid Electrolytes for Battery Applications

A challenge for lithium lanthanum zirconate (LLZO)-based solid-state batteries is to increase the critical current density (CCD) to enable high current cycling. A promising strategy is to modify the LLZO surface morphology to provide a larger contact area with the Li metal. Here, a surface-textured thin LLZO electrolyte was prepared through an easily scalable process. The texturing process is a simple pressing of green LLZO tapes between micro-textured substrates. A variety of textures can be produced, depending on the type of substrate, and texturing can be on either one side or both sides. For this work, after pressing and sintering, several micro-patterns are formed on thin LLZO (~118 μm thick). The properties of the various samples were characterized to investigate the impact of surface texturing, and the most promising ones were selected for electrochemical testing in symmetrical lithium cells and full cells. Li symmetric cells using a coarse ridge-textured LLZO exhibit ~2.5 times increased CCD compared to planar non-textured LLZO, and a solid-state full cell shows stable cycling and improved rate performance. Finally, we believe this process offers a favorable trade-off of processing complexity vs structural optimization to maximize CCD.

25 ENERGY STORAGE↗
DOE OSTI2020

Deacetylation and Mechanical Refining (DMR) and Deacetylation and Dilute Acid (DDA) Pretreatment of Corn Stover, Switchgrass, and a 50/50 Corn Stover/Switchgrass Blend

The most economical feedstock available to future lignocellulosic biorefineries may be a feedstock blend. Corn stover, switchgrass, and a 50:50 blend of corn stover and switchgrass were subjected to three different dilute alkali deacetylation conditions in a 90 L reactor prior to either mechanical refining (DMR) in a disc refiner followed by a Szego mill or dilute acid pretreatment (DDA) at five different conditions in a 4 L batch steam explosion reactor. The forty-five DDA and nine DMR slurries were subjected to high solids enzymatic hydrolysis at an enzyme loading of 15 mg protein per gram cellulose using Novozymes Cellic CTec3 (DDA) or a 4:1 mix of Novozymes Cellic CTec3:HTec 3 (DMR). The highest glucose yield was achieved using DMR processed corn stover from the high severity deacetylation condition (92 °C and 100 kg NaOH/ODMT) at 95.9% ± 0.8%, while the greatest monomeric glucose yields for switchgrass were between 75% to 80%. The glucose yields from saccharification of the 50:50 corn stover/switchgrass blend was approximately the average of the two individual feedstocks for both DDA and DMR processes. Statistical analysis showed that for a given feedstock type dilute alkali deacetylation severity had a significant impact (p < 0.05) on enzymatic hydrolysis yields, and for a given deacetylation severity the feedstock type had a significant effect on glucose conversion with the addition of switchgrass resulting in lower glucose yields. A blending strategy to maximize enzymatic hydrolysis sugar yields while reducing carbohydrate solubilization during the alkaline treatment step was proposed that allows deacetylation of feedstocks with different recalcitrance at optimal conditions for that feedstock, then blending prior to enzymatic hydrolysis.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗
DOE OSTI2021

Climatic Controls on Soil Carbon Accumulation and Loss in a Dryland Ecosystems

Arid and semiarid ecosystems drive year-to-year variability in the strength of the terrestrial carbon (C) sink, yet there is uncertainty about how soil C gains and losses contribute to this variation. For this work, to address this knowledge gap, we embedded C-depleted soil mesocosms, containing litter or biocrust C inputs, within an in situ dryland ecosystem warming experiment. Over the course of one year, changes in microbial biomass and total soil organic C pools were monitored alongside hourly measurements of soil CO 2 flux. We also developed a biogeochemical model to explore the mechanisms that gave rise to observed soil C dynamics. Field data and model simulations demonstrated that water exerted much stronger control on soil biogeochemistry than temperature, with precipitation events triggering large CO 2 pulses and transport of litter- and biocrust-derived C into the soil profile. We expected leaching of organic matter would result in steady accumulation of C within the mineral soil over time. Instead, the size of the total organic C pool fluctuated throughout the year, largely in response to microbial growth: increases in the size of microbial biomass were negatively correlated with the quantity of C residing in the top 2 cm, where most biogeochemical changes were observed. Our data and models suggest that microbial responses to precipitation events trigger rapid metabolism of dissolved organic C inputs, which strongly limit accumulation of autotroph-derived C belowground. Accordingly, changes in the magnitude and/or frequency of precipitation events in this dryland ecosystem could have profound impacts on the strength of the soil C sink.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Timing based clustering of childhood BMI trajectories reveals differential maturational patterns; Study in the Northern Finland Birth Cohorts 1966 and 1986

Children’s biological age does not always correspond to their chronological age. In the case of BMI trajectories, this can appear as phase variation, which can be seen as shift, stretch, or shrinking between trajectories. With maturation thought of as a process moving towards the final state - adult BMI, we assessed whether children can be divided into latent groups reflecting similar maturational age of BMI. The groups were characterised by early factors and time-related features of the trajectories. We used data from two general population birth cohort studies, Northern Finland Birth Cohorts 1966 and 1986 (NFBC1966 and NFBC1986). Height (n = 6329) and weight (n = 6568) measurements were interpolated in 34 shared time points using B-splines, and BMI values were calculated between 3 months to 16 years. Pairwise phase distances of 2999 females and 3163 males were used as a similarity measure in k-medoids clustering. We identified three clusters of trajectories in females and males (Type 1: females, n = 1566, males, n = 1669; Type 2: females, n = 1028, males, n = 973; Type 3: females, n = 405, males, n = 521). Similar distinct timing patterns were identified in males and females. The clusters did not differ by sex, or early growth determinants studied. Trajectory cluster Type 1 reflected to the shape of what is typically illustrated as the childhood BMI trajectory in literature. However, the other two have not been identified previously. Type 2 pattern was more common in the NFBC1966 suggesting a generational shift in BMI maturational patterns.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Structure and properties of densified silica glass: characterizing the order within disorder

The broken symmetry in the atomic-scale ordering of glassy versus crystalline solids leads to a daunting challenge to provide suitable metrics for describing the order within disorder, especially on length scales beyond the nearest neighbor that are characterized by rich structural complexity. Here, we address this challenge for silica, a canonical network-forming glass, by using hot versus cold compression to (i) systematically increase the structural ordering after densification and (ii) prepare two glasses with the same high-density but contrasting structures. The structure was measured by high-energy X-ray and neutron diffraction, and atomistic models were generated that reproduce the experimental results. The vibrational and thermodynamic properties of the glasses were probed by using inelastic neutron scattering and calorimetry, respectively. Traditional measures of amorphous structures show relatively subtle changes upon compacting the glass. The method of persistent homology identifies, however, distinct features in the network topology that change as the initially open structure of the glass is collapsed. The results for the same high-density glasses show that the nature of structural disorder does impact the heat capacity and boson peak in the low-frequency dynamical spectra. Densification is discussed in terms of the loss of locally favored tetrahedral structures comprising oxygen-decorated SiSi 4<:sub> tetrahedra.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A conformation-selective monoclonal antibody against a small molecule-stabilised signalling-deficient form of TNF

We have recently described the development of a series of small-molecule inhibitors of human tumour necrosis factor (TNF) that stabilise an open, asymmetric, signalling-deficient form of the soluble TNF trimer. Here, we describe the generation, characterisation, and utility of a monoclonal antibody that selectively binds with high affinity to the asymmetric TNF trimer–small molecule complex. The antibody helps to define the molecular dynamics of the apo TNF trimer, reveals the mode of action and specificity of the small molecule inhibitors, acts as a chaperone in solving the human TNF–TNFR1 complex crystal structure, and facilitates the measurement of small molecule target occupancy in complex biological samples. We believe this work defines a role for monoclonal antibodies as tools to facilitate the discovery and development of small-molecule inhibitors of protein–protein interactions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Extreme fast charging of commercial Li-ion batteries via combined thermal switching and self-heating approaches

Abstract The mass adoption of electric vehicles is hindered by the inadequate extreme fast charging (XFC) performance (i.e., less than 15 min charging time to reach 80% state of charge) of commercial high-specific-energy (i.e., >200 Wh/kg) lithium-ion batteries (LIBs). Here, to enable the XFC of commercial LIBs, we propose the regulation of the battery’s self-generated heat via active thermal switching. We demonstrate that retaining the heat during XFC with the switch OFF boosts the cell’s kinetics while dissipating the heat after XFC with the switch ON reduces detrimental reactions in the battery. Without modifying cell materials or structures, the proposed XFC approach enables reliable battery operation by applying <15 min of charge and 1 h of discharge. These results are almost identical regarding operativity for the same battery type tested applying a 1 h of charge and 1 h of discharge, thus, meeting the XFC targets set by the United States Department of Energy. Finally, we also demonstrate the feasibility of integrating the XFC approach in a commercial battery thermal management system.

25 ENERGY STORAGE↗