SEARCH · Engineering Papers
Results for “Transfer function design”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Toward efficient elastocaloric systems: Predicting material thermal properties with high fidelity
A critical need to accurately model thermal behaviors of materials that exhibit strong elastocaloric effects, including predicting the effects themselves at varying stresses and temperatures, has been addressed using a simple and versatile physics-based approach. The key factor leading to the high precision is approximating the underlying elastic phase transition as a smooth modification of lattice entropy between coexisting phases. Once the phase transformation entropy is modeled to match experimentally measured strain as a function of temperature and applied stress, estimating the heat capacity, entropy, and isothermal entropy and adiabatic temperature changes in temperature-stress coordinates becomes straightforward. This approach provides insight into how thermal properties of elastocaloric materials vary through the transition based on strain measurements that are simple to perform and interpret. In addition to aiding in the rapid evaluation of new and existing elastocaloric materials, this advance is expected to prove invaluable for accurate heat transfer modeling aimed at designing efficient regenerative elastocaloric cooling devices.
Modulating the Electron Affinity of Small Bipyridyl Molecules on Single Gold Nanoparticles for Plasmon-Driven Electron Transfer
Developing controlled platforms for plasmon-driven chemistry is of great importance in catalytic reactions at the nanoscale. We report anion radical formation for five bipyridyl complexes of varying degrees of electron affinity utilizing optically fo-cused intraband (594 nm) and interband (532 nm) pump excitation of single gold nanoparticles. The surface-enhanced Raman scattering (SERS) of anion radicals for the five non-resonant adsorbed molecules 2,2’-bipyridine (22BPY), 4,4’-bipyridine (44BPY), trans-1,2-bis(4-pyridyl)ethylene (BPE), 1,2-bis(4-pyridyl)acetylene (BPA), and 1,2-bis(4-pyridyl)ethane (BPEt) were detected using localized surface-plasmon resonance (LSPR) excitation with 785 nm. The electron affinity of the five bipyridyl complexes were determined using electrochemistry. Molecules with low electron affinity experienced high-er instances of radical anion formation under a plasmon-coupled intraband electron transfer excitation (594 nm) whereas molecules with high electron affinity showed a preference for anion radical formation under direct interband electron trans-fer excitation (532 nm). The lowest unoccupied molecular orbital (LUMO) energy levels for low electron affinity surface-bound molecules (22BPY, BPEt) are on average ~0.43 eV higher for high electron affinity surface-bound molecules (BPA, BPE, 44BPY) as calculated using time-dependent density functional theory, elucidating the importance of plasmon coupling to energy levels that facilitate charge transfer pathways. We also show the ability to ‘activate’ high vs low electron affinity single nanoparticles with the choice of pump excitation wavelength. The findings show the complex interplay between molecular electron affinity, orbital overlap with the density of states of the plasmonic metal, and excitation energetics of the pump laser wavelength. Potential applications of this work include enhanced control over molecular scale catalysis, biosensor design, and solar energy capture.
Two Dimensional Topology Optimization of Heat Exchangers with the Density and Level-Set Methods
We design heat exchangers using two topology optimization approaches: the density, i.e. volume fraction and level set methods. Our goal is to maximize the heat exchange between two fluids in separate channels while constraining the pressure drop across each channel. The heat exchanger is modeled with a coupled thermal-flow formulation. The flow is governed by an isothermal and incompressible Stokes-Brinkman equation and the heat transfer is governed by a convection-diffusion equation with high Peclet number. We solve one set of Stokes-Brinkman equations per fluid. Each Brinkman term in the flow equation serves to model the other phase as a solid, thereby preventing mixing. We first represent the solid and fluid phases using a volume fraction variable and apply a SIMP-like penalization in the Brinkman term to drive the optimization to a discrete design. The cost and constraint function derivatives are automatically calculated with the library pyadjoint and the optimization is performed by the Method of Moving Asymptotes. In a second optimization formulation, we use the level set approach to define the interface that separates the two fluids. Pyadjoint calculates the shape derivatives of the cost and constraint functions and the Hamilton-Jacobi advects the interface, allowing for topological changes. We present results in two dimensions and discuss the advantages and disadvantages of each approach.
Creation of discrete active site domains via mesoporous silica poly(styrene) composite materials for incompatible acid–base cascade reactions
This work highlights the design and synthesis of bifunctional mesoporous silicate – polymer composite dual acid–base supported cascade catalysts. Compartmentalization of the two incompatible active sites is sought by segregating acid sites on the silica surface, and base sites within polymer chains and/or polymer domains. The ability to isolate and segregate active sites via control of the mesoporous silica pore size and polymer molecular weight is probed with silica samples functionalized by a grafting-to process. Supplemental activator and reducing agent (SARA) atom transfer radical polymerization is used to synthesize random copolymers containing protected primary amines. Thiol–ene ‘click’ chemistry facilitates silica functionalization via a convergent approach, with the ene-functionalized polymer end group and silica-grafted thiols forming SBA/MCM-SH-poly(styrene-co-2-(4-vinylbenzyl)isoindoline-1,3-dione). Polymer deprotection and thiol oxidation produces primary amine/sulfonic acid containing composite catalysts. With the polymer supported Lewis base and silica grafted Brønsted acid, the two-step deacetalization – Knoevenagel condensation cascade is explored to assess the ability of these polymer/silica hybrids to segregate active sites, allowing both acid and base site accessibility. Six composite catalysts are synthesized and tested in individual and cascade reactions with kinetic results demonstrating that lower molecular weight SBA-15-P1 and MCM-41-P1 catalysts outperform (higher turnover frequencies and initial rates) their higher molecular weight analogues, as well as a polymer-free system containing molecular active sites dispersed on the silica surface. Higher molecular weight composite catalysts perform more poorly due to limited chain solubility, mass transfer limitations, and poor catalyst accessibility. In many cases, the polymer chains effectively thread into the mesopores, with higher molecular weight polymers leading to pore blockage and inhibited mass transfer.
Hydrogen Mitigation Process Installation at Nevada Solar One
The National Renewable Energy Laboratory (NREL) and Acciona Solar Power (ASP) have developed and are implementing a process that addresses the issue of hydrogen buildup in parabolic trough power plants. Our method selectively removes hydrogen from the expansion tanks of the power plant to control hydrogen levels in the circulating heat-transfer fluid (HTF). During previous work, we developed a sensor that measures hydrogen partial pressure in the expansion-tank headspace gas. We demonstrated that our sensor measures hydrogen levels over a wide range of partial pressure—from 1.33 mbar down to 0.003 mbar. More recently, we conceived and developed an integrated process module that performs both hydrogen sensing and separating functions. The sensor/separator measures hydrogen partial pressure in the headspace gas in the same way as our original sensor design. Additionally, the integrated module separates hydrogen from the headspace gas to reduce hydrogen to the level needed to maintain the performance of receivers in the collector field. We demonstrated the performance of a laboratory-scale version of this module. Testing showed that the module performed as expected: the accuracy of the sensing function was ±7%, and the hydrogen extraction rate for the separating mode was consistent with our modeling predictions. The primary benefit of this module is its simple design, both in terms of function and incorporation into the HTF subsystem of the power plant. Most recently, NREL and ASP planned, specified, and designed a mitigation process that is based on the integrated module. We are currently completing installation of this process at ASP's Nevada Solar One power plant in Boulder City, Nevada, USA. The mitigation process is being installed at ground level below the HTF expansion tanks, where it draws headspace gas from the tanks, removes hydrogen, and returns the treated gas back to the tanks. In this paper, we report progress on the installation and describe some of the many design details and challenges that we addressed during the past year. We will generate initial performance data from the Nevada Solar One mitigation process in early 2020.
Fundamental Studies of the Vibrational, Electronic, and Photophysical Properties of Tetrapyrrolic Architectures
The ability to capture and utilize light in the near-ultraviolet (NUV), visible and near-infrared (NIR-I and NIR-II) spectral regions (i.e., 320–400, 400–700, 700–1000, 1000–1700 nm) is essential for any solar-energy conversion scheme. Nature employs chlorophylls and bacteriochlorophylls in light-harvesting architectures to absorb light in the blue and red/NIR regions. Accessory pigments (carotenoids, bilins) augment absorption of the (bacterio)chlorophylls in the green region. The harvested energy is funneled to a reaction center protein, where charge separation occurs. Subsequent migration of the electron and the hole stabilizes and stores the energy from light via redox chemistry. The long-term objective of the Bocian/Holten&Kirmaier/Lindsey research program under this DOE grant has been to develop tetrapyrrole-based molecular architectures that absorb sunlight, funnel energy and separate charge with high efficiency. Integral to the program has been iterative cycles of design, synthesis and characterization that provided deep insights into the relationships between chemical composition, electronic structure, and key static and dynamic properties (vibrational, redox, photophysical, energy/charge transfer) of tetrapyrrolic systems. Such architectures included monomers, dyads, larger arrays, and complexes with accessory components. The objective was to develop molecular designs and guiding principles to enhance current and future energy-conversion schemes. Molecular arrays targeted to address one or more fundamental questions concerning light harvesting and energy/charge transfer were constructed from analogues of the naturally occurring hemes, chlorophylls and bacteriochlorophylls. Diverse, tunable synthetic building blocks were prepared that spanned the three respective tetrapyrrole families, which are the porphyrins, chlorins and bacteriochlorins. Thus, the research focused on porphyrins as well as synthetic surrogates for chlorophylls (chlorins, 13 1 -oxophorbines and chlorin-imides) and bacteriochlorophylls (bacteriochlorins, bacterio-13 1 -oxophorbines and bacteriochlorin-imides), generically termed hydroporphyrins. Although the three tetrapyrrole classes (porphyrins, chlorins and bacteriochlorins) absorb light strongly in the violet-blue spectral region, the long-wavelength absorption band typically lies in the green-orange, red, and NIR regions, respectively, with increasing intensity. Understanding the spectra, electronic structure, and energy/charge-transfer properties of such tetrapyrrolic macrocycles is of central importance for the rational design of molecular architectures for solar-energy conversion. Our integrated program of molecular design and synthesis coupled with a variety of spectroscopic, electrochemical, and computational studies have probed from first principles how structural and electronic properties of tetrapyrrolic macrocycles dictate spectral properties as well as the rates of ground-state hole/electron transfer and excited-state energy flow in multicomponent architectures. Individual molecules and multicomponent architectures were designed to test ideas of fundamental importance, often requiring the development of new synthetic methodology. The members of the collaborative team had almost daily discussions by phone and/or e-mail concerning design of molecules, flow of compounds between the labs, planning of physical characterization studies, discussing results and analysis and integrating into design of next generation architectures, and the preparation of manuscripts. Furthermore, students and postdocs in the different labs routinely communicated with one another to facilitate the advancement of the research activities. In short, a highly integrated and collaborative research program was well established among the groups. The research effort involved molecular design and synthesis of synthetic molecular architectures by the Lindsey group integrated with physicochemical and photophysical characterization by the Bocian group and the Holten&Kirmaier group (Figure 2). The Bocian group carried out electrochemical, electron paramagnetic resonance (EPR), resonance Raman (RR), and Fourier-transform infrared (FT-IR) studies, as well as density functional theory (DFT) calculations and the time-dependent extension (TDDFT) to gain insight into excited-state properties. The Holten&Kirmaier group carried out static and time-resolved absorption and fluorescence spectroscopy studies and simulated absorption spectra using molecular orbital (MO) energies from DFT as input to the four-orbital model to complement the TDDFT calculations. The combined measurements provided understanding of the vibrational/electronic properties of the individual molecules and the changes that occur upon incorporation into multicomponent architectures. This information underpinned elucidating the mechanisms and timescales of ground-state hole/electron transfer and excited-state energy and charge transfer.
Nanosecond Gated CMOS Camera (NSGCC) ICD (Rev. 2.1)
The Ultra-Fast X-ray Imager (UXI) program is an ongoing effort at Sandia National Laboratories to create high speed, multi-frame, time-gated Read Out Integrated Circuits (ROICs), and a corresponding suite of photodetectors to image a wide variety of High Energy Density (HED) physics experiments on both Sandia’s Z-Machine and LLNL’s National Ignition Facility (NIF). Several cameras have been designed over the length of the program; one of the most recent is the Icarus, which is an improvement on past imagers (Furi and Hippogriff). A second sensor that can be connected is the Daedalus sensor. The Icarus is a 1024 × 512-pixel array with either 25 μm or 8 µm spatial resolution containing four frames of storage per pixel and has improved timing generation and distribution components while achieved 2 ns time gating. The Daedalus sensor is also a 1024 x 512-pixel array with 25 µm special resolution containing three frames of storage per pixel and has an increased set of features for a wider variety of applications from interlacing of rows in each frame to configurability of all shutters. See Section 14 for details regarding the Icarus implementation of the firmware and Section 15 for details regarding the Daedalus implementation. Due to the unique test environments UXI sensors are targeted for, full custom hardware was required to physically mount an Icarus or Daedalus sensor, manage its various functions, and read out pixel data for transfer to a host computer. Beyond experimental functionality, the hardware also needed to accommodate sensor characterization requirements. Lawrence Livermore National Laboratory’s ‘Version 4.0 Board’ was the result of these efforts. It mounts all the components required to fully utilize the Icarus and Daedalus sensors including analog to digital converters to convert pixel data and various system voltages to digital form for readout and analysis, DAC channels for remote configuration of critical bias voltages, static random-access memories to buffer pixel data, RS422 and Gigabit Ethernet communications for remote access, and an FPGA to tie these components together. This document describes the FPGA electrical interfaces in detail to allow the reader a greater understanding of the device, and to facilitate implementation of custom software to control and manage it. The Version 4.0 Board is a continuation of the Nano-second Gated CMOS hardware design that retains much of the functionality of the Version 1.0 Board while adding features including a DAC instead of digital potentiometers, as well as sensors for pressure and radiation. The Version 4.0 board is intended for applications requiring tight form-factor enclosures. It is composed of two stacking boards; one holds the FPGA and regulators to power the various components of the board while the other contains the mating connector to the sensor, image-readoff ADCs, the DAC, and other components.
High-Temperature Heat Transfer Fluid Circulator for Concentrating Solar Power Systems
Concentrating Solar Power (CSP) plants with Thermal Energy Storage (TES), require compressors capable of circulating supercritical carbon dioxide (sCO2) heat transfer fluids (HTFs) at temperatures from 500 to 700+°C and pressures from 8 to 25 MPa (80 to 250 Bar or 1160 to 3626 psia) in order to achieve thermal-to-electric efficiencies >50%. A review of papers relating to SCO2 compressors reveals that in almost every case the conditions being considered either allow for cooling of the SCO2 working fluid or are considering operating conditions close to the critical point at a temperature and pressure of approximately 31°C and 1070 psi). While the technology reported in these papers is relevant to most turbomachinery, the current CSP gas pathway circulator operating pressures are well above the CO2 critical point and do not allow for cooling of the main HTF flow. The purpose of this paper was to describe the key system issues affecting the design of a HTF circulator that could be scaled from a small size research and proof of concept circulator compressor to sizes supporting power plants producint upwards of 100 to 300 Mega Watts of electrical power. Due to the high temperatures and pressures the research scale HTF circulator was designed to be hermetically sealed to prevent leakage of the super critical carbon dioxide to the environment. In order to achieve hermetic sealing the drive motor and centrifugal impeller were fully integrated in a single shaft system configuration. From a preliminary assessment of compression power as a function of operating speed and impeller diameter it was determined that a smaller, higher speed impeller would result in a more efficient circulator. However, due to the high pressure and corresponding density of the sCO2 coupled with high operating speeds, large windage losses (i.e., viscous drag on the high speed rotating shaft) would occur which could result in a substantial reduction in efficiency of the system. Therefore tradoff studies were complerted to identify the operating speeds and system component sizes to achieve high efficiency. Based on the trade studies, the final design was a 55 mm diamter compressor impeller operating at speeds to 85,000 rpm. The unit will be built and tested in the future. Key Words: Super Critical Carbon Dioxide, Heat Transfer Fluid, Turbomachinery, Compressor, Circulator, Critical Point, Concentrating Solar Power, Solar Energy
The role of transition metal formyl intermediates in the reduction of CO and CO 2
Transition-metal formyl (metalloformyl) complexes occupy a central position in the activation of small molecules, particularly in the reduction of carbon monoxide (CO) and carbon dioxide (CO 2 ). This review examines five decades of progress in the synthesis of metalloformyl complexes and investigations into their structure and reactivity. The bonding in the M–CHO unit is best described as a resonance hybrid between a classical σ-bound formyl ligand and an oxycarbene-like electronic structure, which governs their distinctive spectroscopic signatures and versatile reactivity. Established synthetic routes are summarized, including pathways involving hydride addition and CO insertion, alongside a discussion of the thermodynamic and kinetic factors that control formyl stability. Decomposition pathways and Lewis-acid stabilization strategies are analyzed as key design principles for extending metalloformyl lifetimes under catalytic conditions. Particular attention is given to hydride transfer processes and the role of metalloformyl intermediates as both reactive substrates and hydride sources in reduction chemistry. Lastly, emerging catalytic strategies that exploit metalloformyl intermediates in CO 2 and CO reduction are evaluated, highlighting how control of hydricity, redox potential, and secondary-sphere interactions enables selective C—H bond formation under comparatively mild conditions. Collectively, these studies establish metalloformyl complexes as mechanistically informative and functionally relevant intermediates that bridge fundamental organometallic chemistry with modern approaches to small-molecule activation.
Fundamental Interactions of Bimetallic Cu x Pd y ( x + y = 4) Clusters Supported on the α-WC(0001) Surface and Their Performance for CO 2 Adsorption and Dissociation
The tungsten carbide α-WC(0001) surface, an active system for the activation of H 2 and important hydrogenation processes involving unsaturated hydrocarbons, can serve as a support of bimetallic clusters to produce materials with unique catalytic properties, opening routes for a wide range of technical applications. In particular, Cu x Pd y clusters are of particular interest because they combine metals with different properties. A stochastic method was applied to obtain the geometry of Cu x Pd y (x + y = 4) bare clusters, evaluating thousands of possibilities to obtain stable structures, yielding one isomer for Cu 4 , Cu 2 Pd 2 , Cu 1 Pd 3 , and Pd 4 and two isomers for Cu 3 Pd 1 . These clusters were supported on C and W terminations of the tungsten carbide (0001) surface, exploring all of the binding possibilities. The adsorption energies on the C and W terminations are in the ranges from −2.51 to −3.02 eV and from −2.26 to −3.30 eV, respectively. The strongest and weakest binding was seen for monometallic Cu 4 and Pd 4 clusters on both C and W terminations, while the Cu-Pd bimetallics have intermediate adsorption energies but lack a clear trend in terms of composition. The location of Cu x Pd y clusters over the (0001) surface induces a decrease in the work function relative to the pristine surface, while the cluster-surface Bader charge transfer and variations in the partial density of states point to changes in the electronic structure of the carbide atoms upon binding of the metallic clusters. The d-band center of the Cu x Pd y deposited on WC(0001) indicates an intermediate reactivity among Cu(111) and Pd(111) surfaces, modulating the reactivity with small numbers of Cu and Pd atoms, i.e., atom economy in catalyst design. The likelihood of existence of the most stable Cu x Pd y (x + y = 4) clusters in the temperature range of 298-400 K is 100%. The composite Cu x Pd y /α-WC(0001) (x + y = 4), is a nontrivial system since 22 isomers are needed to completely describe its structural properties. Among the isomers, seven structures are necessary to represent Cu 3 Pd 1 /α-WC(0001), five for Pd 4 /α-WC(0001), two for Cu 4 /α-WC(0001), and four for Cu 2 Pd 2 /α-WC(0001) and Cu 1 Pd 3 /α-WC(0001). The large number of cluster isomers supported on the tungsten carbide surface opens the door for several applications in the heterogeneous catalysis of the Cu x Pd y /α-WC(0001) composite, with the possibility of modulating the geometric, electronic, and chemical properties according to a desired application. Test studies for the adsorption of CO 2 indicate that the Cu x Pd y /α-WC(0001) composites are highly active for the adsorption and decomposition of the molecule, with bimetallic and admetal-carbide interactions playing a key role in the binding performance. In conclusion, this high activity indicates that these systems should be useful as catalysts for the conversion of CO 2 to oxygenates or light alkanes.
Monitoring Sulfuric Acid and Temperature Using Raman Spectroscopy and Multivariate Chemometrics
Multivariate regression models were optimized for the quantification of sulfuric acid (H 2 SO 4 ) [0–8 M] and temperature (20 °C–80 °C) in the presence of ammonium sulfate ((NH 4 ) 2 SO 4 [0–0.6 M]) using Raman spectroscopy. Optical vibrational spectroscopy is a useful nondestructive technique for the in situ analysis of complex chemical systems notoriously difficult to monitor in situ and in real-time. Multivariate analysis, a chemometrics method, can be paired with these nondestructive optical methods for determining analyte concentration and speciation in complex solutions, such as dissociated species in polyprotic acids, e.g., H 2 SO 4 . The effect of temperature is often overlooked although it can have a major influence on speciation and the corresponding Raman spectra. Here, in this study, partial least squares regression models were optimized for the quantification of H 2 SO 4 and its two deprotonated forms as a function of temperature. Measuring bisulfate as a function of temperature is particularly challenging owing to changes in the second dissociation constant. A designed training set effectively minimized the sample set size and trained a robust predictive model with percent root mean square error of <3% for H 2 SO 4 . The practical strategy employed here was demonstrated to be effective for building chemometric models that directly account for dynamic temperatures with static samples and is shown to be amenable to flow cell analysis applications with a simple calibration transfer for process monitoring applications.
Quantifying Thermal Output of Energetic Materials (LDRD Final Report)
We present the results of an LDRD project, funded by the Nuclear Deterrence IA, to develop capabilities for quantitative assessment of pyrotechnic thermal output. The thermal battery igniter is used as an exemplar system. Experimental methodologies for thermal output evaluation are demonstrated here, which can help designers and engineers better specify pyrotechnic components , provide thermal output guidelines for new formulations, and generate new metrics for assessing component performance and margin given a known failure condition. A heat-transfer analysis confirms that the dominant mode of energy transfer from the pyrotechnic output plume to the heat pellet is conduction via deposition of hot titanium particles. A simple lumped-parameter model of titanium particle heat transfer and a detailed multi-phase model of deposition heat transfer are discussed. Pyrotechnic function, as defined by "go/no-go" standoff testing of a heat pellet, is correlated with experimentally measured igniter plume temperature, titanium metal particle temperature, and energy deposition. Three high-speed thermal diagnostics were developed for this task. A three-color imaging pyrometer, acquiring 100k images per second on three color channels, is deployed for measurement of titanium particle temperatures. Complimentary measurements of the overall igniter plume emission ("color") temperature were conducted using a transmission-grating spectrograph in line-imaging mode. Heat flux and energy deposition to a cold wall at the heat-pellet location were estimated using an eroding thermocouple probe, with a frequency response of ~5 kHz. Ultimate "go/no-go" function in the igniter/heat-pellet system was correlated with quantitative thermal metrics, in particular surface energy deposition and plume color temperature. Titanium metal-particle and plume color temperatures both experience an upper bound approximated by the 3245-K boiling point of TiO 2 . Average metal-particle temperatures remained nearly constant for all standoff distances at T = 2850 K, ± 300 K, while plume color temperature and heat flux decay with standoff—suggesting that heat-pellet failure results from a drop in metal-particle flux and not particle temperature. At 50% likelihood of heat-pellet failure, peak time-resolved plume color temperatures drop well below TiO 2 boiling to ~2000 - 2200 K, near the TiO 2 melting point. Estimates of peak heat flux decline from up to 1 GW/m 2 for near-field standoffs to below 320 MW/m 2 at 50% failure likelihood.
Understanding and controlling the fundamental photochemistry of protonic solar energy conversion (Final Scientific/Technical Report)
The selectivity and activity of most fuel-forming reactions are tunable by the concentration of electrons, holes, protons, and/or hydroxides. That is one reason why traditional solar energy conversion processes are used to drive these reactions, where light directly increases the concentration of electrons and holes. We, instead, took a different approach, using light to increase the concentration of protons and/or hydroxides. For this, we leveraged photophysical and solid-state physics theories, techniques, and design strategies previously developed for the study of traditional solar energy conversion processes. We designed and fabricated several materials platforms based on molecular photoacid and photobase dyes coupled with ion-exchange polymer membranes and assessed their fundamental photoelectrochemistry. We demonstrated control over built-in electric potentials, photovoltages, proton-transfer kinetics, and efficiency limits to our approach. Understanding the basic science of these dye-sensitized protonic membranes and their photochemical mechanisms is of use to the DOE-relevant processes of solar photochemical fuel formation, solar photodialytic desalination, and solar cells. Moreover, functional materials that we developed from this project may be of use to several broad-reaching fields and may provide the foundation for a completely new, inexpensive, and robust solar energy conversion technology.
N‐Heterocyclic Carbene Functionalization of 2D Transition Metal Dichalcogenides via a Frustrated Lewis Pair Strategy
Molecular functionalization of 2D transition metal dichalcogenides (TMDs), which unites tailorability of organic molecules and robustness of inorganic solids, is important for tuning their surface properties. While it is common to leverage the electronic effect of organic ligands to functionalize TMDs, the corresponding steric hinderance has remained elusive and underexplored. Herein N‐heterocyclic carbene (NHC) functionalization of WS 2 is demonstrated via a frustrated Lewis pair (FLP) route, which exploits both the electronic and steric effect for TMD functionalization. The Lewis base, 1,3‐bis(2,4,6‐trimethylphenyl)imidazol‐2‐ylidene (IMes), is anchored to the sulfur vacancy sites (Lewis acid) of the WS 2 nanostructures with the hybrid‐interface‐mediated steric hinderance, mimicking the FLP chemistry and enabling dihydrogen cleavage at room temperature and atmospheric pressure. Solid‐state nuclear magnetic resonance (ssNMR) results reveal the local chemical environment of the activated hydrogen species, which can be transferred for room‐temperature hydrogenation reactions. Finally, the insights are useful for designing weak, non‐covalent bonds to modify the 2D surface of TMDs for a broad scope of applications.
From PINNs to PIKANs: recent advances in physics-informed machine learning
Physics-Informed Neural Networks (PINNs) have emerged as a key tool in Scientific Machine Learning since their introduction in 2017, enabling the efficient solution of ordinary and partial differential equations using sparse measurements. Over the past few years, significant advancements have been made in the training and optimization of PINNs, covering aspects such as network architectures, adaptive refinement, domain decomposition, and the use of adaptive weights and activation functions. A notable recent development is the Physics-Informed Kolmogorov-Arnold Networks (PIKANS), which leverage a representation model originally proposed by Kolmogorov in 1957, offering a promising alternative to traditional PINNs. In this review, we provide a comprehensive overview of the latest advancements in PINNs, focusing on improvements in network design, feature expansion, optimization techniques, uncertainty quantification, and theoretical insights. We also survey key applications across a range of fields, including biomedicine, fluid and solid mechanics, geophysics, dynamical systems, heat transfer, chemical engineering, and beyond. Lastly, we review computational frameworks and software tools developed by both academia and industry to support PINN research and applications.
Chemiresistor sensor based on ion-imprinted polymer (IIP)-functionalized rGO for Cd(II) ions in water
This study reports the design and development of a novel chemiresistor (CR) sensor using ion imprinted polymer (IIP)-functionalized reduced graphene oxide (rGO) [IIP/rGO-CR] for cadmium ions (Cd(II)) determination in water. The sensor consisted of a CR transducer made of rGO channel bridging source and drain electrodes prepared by self-assembly and thermal reduction of graphene oxide (GO) on Au interdigitated electrodes chip fabricated on Si/SiO 2 substrate. The IIP was then grafted on rGO using surface-initiated reversible addition-fragmentation chain transfer (RAFT) polymerization with polyethylenimine (PEI) and methylacrylic acid (MAA) as dual functional monomers and Cd(II) ions as template through UV light-initiated copolymerization. The IIP functionalized on rGO acted as an effective recognition element that modulated the resistance of rGO-CR upon binding of Cd(II), enabling Cd(II) detection at ppb level in aqueous solutions. The prepared IIP/rGO-CR sensor worked effectively in the linear range of 2~200ppb and achieved a limit of detection (LOD) of 0.83 ppb, which is lower than the World Health Organization guidelines of 3ppb for drinking water quality. The developed sensor of IIP/rGO-CR showed a high selectivity against a variety of trace and heavy metal ions found in water and good stability for up to 60 days when stored at room temperature for Cd(II) determination in water. Further, the sensor was successfully applied to analyzing Cd(II) spiked in tap, lake and river waters with a 94.5%–113.5% recovery, demonstrating a high degree of accuracy even in complex water samples. Finally, our results illustrated that the CR sensor of IIP functionalized rGO provides a potential platform for sensitive, robust and low-cost environmental analysis of Cd(II) in water.
A Bottom-Up Approach to Rational Design of Crystalline Materials: Investigation of Vibronic Coherences Underlying Exciton Dynamics in Semiconductors
In this project we uncovered structure-function relationships of donor-acceptor co-crystals used to develop next-generation optoelectronic devices. Unraveling the photodynamics of molecular crystalline materials poses many challenges for spectroscopy due to broad, overlapping features representing numerous underlying dynamical processes. This leads researchers to make many assumptions about the dynamics of a system in choosing an appropriate kinetic fitting model. Computationally, electronic structure methods are either prohibitively expensive or underdeveloped for computing the excited state structure of molecular materials, especially states that exhibit charge transfer. Researchers must therefore perform calculations of excited electronic states using truncated models of molecular materials. Here we present a joint experimental-theoretical approach to bridging the gap between the photodynamics of a molecular material and its constituent molecules. We focus our efforts on quantifying the timescales and mechanisms of photoexcitation in donor-acceptor co-crystals and donor-acceptor dimers where the lowest-lying excited state is characterized by charge transfer from the donor to the acceptor. We employ ultrafast UV pump, UV-Vis probe transient absorption spectroscopy to unravel the time-resolved spectroscopic signatures of the photodynamics in both the crystalline material and donor-acceptor dimers in solution. We perform electronic structure and excited state dynamics calculations of the dimers to inform kinetic fitting models and assign the spectral features. The photodynamics of the crystal vs. dimer systems have many similarities, enabling unprecedented insights into the formation and evolution of charge transfer excitons in the crystalline systems.