Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TIC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

First-principles study, fabrication and characterization of (Zr 0.25 Nb 0.25 Ti 0.25 V 0.25 )C high-entropy ceramics

The formation possibility of a new (Zr 0.25 Nb 0.25 Ti 0.25 V 0.25 )C high-entropy ceramics (ZHC-1) was first analyzed by the first-principles calculations and thermodynamical analysis and then it was successfully fabricated by hot pressing sintering technique. The first-principles calculation results showed that the mixing enthalpy of ZHC-1 was 5.526 kJ/mol and the mixing entropy of ZHC-1 was in the range of 0.693R–1.040R. The thermodynamical analysis results showed that ZHC-1 was thermodynamically stable above 959 K owing to its negative mixing Gibbs free energy. The experimental results showed that the as-prepared ZHC-1 (95.1% relative density) possessed a single rock-salt crystal structure, some interesting nano-plate-like structures, and high compositional uniformity from nanoscale to microscale. By taking advantage of these unique features, compared with the initial metal carbides (ZrC, NbC, TiC and VC), it showed a relatively low thermal conductivity of 15.3 ± 0.3 W/(m·K) at room temperature, which was due to the presence of solid solution effects, nanoplates and porosity. Meanwhile, it exhibited the relatively high nanohardness of 30.3 ± 0.7 GPa and elastic modulus of 460.4 ± 19.2 GPa and the higher fracture toughness of 4.7 ± 0.5 MPam 1/2 , which were attributed to the solid solution strengthening mechanism and nanoplate pullout and microcrack deflection toughening mechanism.

36 MATERIALS SCIENCE↗

A general kinetic framework for dislocation mobility derived from probabilistic cellular automaton simulations of the kink-pair mechanism

Dislocation mobility laws are essential components of dislocation-density-based crystal plasticity models. For dislocations governed by the kink-pair mechanism, however, existing formulations are typically limited to specific regimes due to the com plex interplay between stochastic kink-pair nucleation and lateral kink migration. In this work, we develop a general kinetic framework that expresses the average dislocation velocity as a function of mechanism-level variables: positive/negative kink pair nucleation rates, kink migration velocity, dislocation segment length, critical kink-pair width, and kink height. Probabilis tic cellular automaton simulations are used to capture the behavior of conceptual dislocation segments between the limiting conditions of migration outpacing nucleation on the one end and nucleation outpacing migration on the other. An elemen tary functional form that captures the system dynamics is suggested and fitted against the simulation results. This framework remains valid for arbitrary combinations of the six variables and is, therefore, compatible with any admissible constitutive re lations that describe their stress and temperature dependence. Comparisons with established approaches and experimental results confirm the robustness and physical consistency of the formulation, making it broadly applicable to material systems in which dislocation motion is governed by the kink-pair mechanism.

36 MATERIALS SCIENCE↗

Highly active Pt/MoC and Pt/TiC catalysts for the low-temperature water-gas shift reaction: Effects of the carbide metal/carbon ratio on the catalyst performance

We present that Pt/MoC and Pt/TiC(001) are excellent catalysts for the low-temperature water-gas shift (WGS, CO + H 2 O → H 2 + CO 2 ) reaction. They exhibit high-activity, stability and selectivity. The highest catalytic activities are seen for small coverages of Pt on the carbide substrates. Synergistic effects at the metal-carbide interface produce an enhancement in chemical activity with respect to pure Pt, MoC and TiC. A clear correlation is found between the ability of the Pt/MoC and Pt/TiC(001) surfaces to partially dissociate water and their catalytic activity for the WGS reaction. Finally, an overall comparison of the results for Pt/MoC and Pt/Mo 2 C(001) indicates that the metal/carbon ratio in the carbide support can have a strong influence in the stability and selectivity of WGS catalysts and is a parameter that must be taken into consideration when designing these systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Logical approach to tritium vacuum pump selection for fusion applications

Vacuum pumps have been used for tritium processing since the 1940s following the isolation of pure tritium. The largest problem facing tritium vacuum pumps is the tritium radioactive decay. The beta particles, recoil energy, and subsequent radical formations are detrimental to most carbon-based materials. Carbon materials, such as plastics, elastomers, carbon fiber, activated carbon, etc., react with tritium to form methane and in the process strip material from the carbonbased material. Other reactions can be self-catalyzing, as is the case with nitrogen and tritium forming tritiated ammonia at room temperature and pressure. Tritium also readily isotopically exchanges with surface -OH groups, increasing the amount of protium in the gas stream while creating a tritium holdup on the surface. Metals are the preferred material when working with tritium, but tritium will permeate into and through almost all metals at some point. The entrapped tritium can decay inside the metal, creating local helium distortions that can impact the structural properties above and beyond the hydrogen embrittlement issue tritium can cause.

Angelette, Lucas M. [Savannah River National Labor↗

Reaction-bond composite synthesis of SiC-TiB 2 by spark plasma sintering/field-assisted sintering technology (SPS/FAST)

High-density SiC-TiB 2 composites were fabricated using the displacement reaction spark plasma sintering/field-assisted sintering technology (SPS/FAST) and SiC, B 4 C, TiC, and Si powders. The reaction process was performed in a narrow time frame compared hot pressing. The SiC-TiB 2 composites were sintered with precursor SiC at various pressures to determine the effects of processing with SPS/FAST. The composites completed synthesis during SPS/FAST processing, which occurs more quickly than hot pressing. SEM, STEM, and Raman spectroscopy are used to show the conversion and microstructure. Finally, the composite of 53.6 wt.% SiC and 46.4 wt.% TiB 2 has 99 % theoretical density, hardness of 26.4 GPa, and fracture toughness of 5.12 MPa m 1/2 .

36 MATERIALS SCIENCE↗

Overview of the vanadium alloy researches for fusion reactors

Various vanadium alloys are being developed as one of the options of structural materials for advanced blankets of fusion reactors. Besides the large heats made in Japan and US, a 110 kg V-4Cr-4Ti ingot was produced in RF recently. Development of advanced vanadium alloys were also carried out, such as the ultra-fine grain alloys containing Y and that with W and TiC strengthening particles. Investigations were performed for further widening of temperature and mechanical application windows of the reference V-4Cr-4Ti alloy by plastic deformation and heat treatments. Neutron irradiation effects combined with lithium corrosion were studied. In addition, some efforts are oriented to issues related to DEMO blanket manufacturing technology, such as W coating for first wall protection and the welding technologies to fabricate large vanadium component. This paper highlights the recent activities of these vanadium alloy researches, discusses the critical issues and summarizes the remaining issues to be addressed.

Chen, J. M.↗

Effect of neutron irradiation on defect evolution in Ti 3 SiC 2 and Ti 2 AlC

Here, we report on the characterization of defects formed in polycrystalline Ti 3 SiC 2 and Ti 2 AlC samples exposed to neutron irradiation – up to 0.1 displacements per atom (dpa) at 350 ± 40 °C or 695 ± 25 °C, and up to 0.4 dpa at 350 ± 40 °C. Black spots are observed in both Ti 3 SiC 2 and Ti 2 AlC after irradiation to both 0.1 and 0.4 dpa at 350 °C. After irradiation to 0.1 dpa at 695 °C, small basal dislocation loops, with a Burgers vector of b = 1/2 [0001] are observed in both materials. At 9 ± 3 and 10 ± 5 nm, the loop diameters in the Ti 3 SiC 2 and Ti 2 AlC samples, respectively, were comparable. At 1 × 10 23 loops/m 3 , the dislocation loop density in Ti 2 AlC was ≈1.5 orders of magnitude greater than in Ti 3 SiC 2 , at 3 x 10 21 loops/m3. After irradiation at 350 °C, extensive microcracking was observed in Ti 2 AlC, but not in Ti 3 SiC 2 . The room temperature electrical resistivities increased as a function of neutron dose for all samples tested, and appear to saturate in the case of Ti 3 SiC 2 . The MAX phases are unequivocally more neutron radiation tolerant than the impurity phases TiC and Al 2 O 3 . Based on these results, Ti 3 SiC 2 appears to be a more promising MAX phase candidate for high temperature nuclear applications than Ti 2 AlC.

36 MATERIALS SCIENCE↗

Recrystallization suppression through dispersion-strengthening of tungsten

Tungsten is the material of choice for the divertor region of future nuclear fusion reactors, an environment that will expose plasma-facing components (e.g. divertor, etc...) to high temperatures and transient high heat flux events. Under these conditions, recrystallization and grain growth of tungsten can occur, leading to undesirable microstructural and mechanical property changes. Therefore, there is a need to raise the recrystallization temperature of tungsten and limit the kinetics of the recrystallization and grain growth processes. In this work, we examine the effect of different types (TiC vs. TaC vs. ZrC) and different concentrations (1.1 vs. 5 vs. 10 wt.%) of dispersed second phase particles in a tungsten matrix on the high temperature performance. Additionally, the addition of second-phase particles effectively increases the temperature of and time for recrystallization and slow grain growth; however, the addition of a high weight fraction of particles alters the surface chemistry, which may impact subsequent plasma-surface interactions. These results show that the addition of small concentrations of dispersed particles can be effectively employed in tungsten to raise the upper operating temperature limit for tungsten in a fusion reactor.

36 MATERIALS SCIENCE↗

Additive-assisted synthesis of boride, carbide, and nitride micro/nanocrystals

General and simple methods for the syntheses of borides, carbides and nitrides are highly desirable, since those materials have unique physical properties and promising applications. Here, a series of boride (TiB{sub 2}, ZrB{sub 2}, NbB{sub 2}, CeB{sub 6}, PrB{sub 6}, SmB{sub 6}, EuB{sub 6}, LaB{sub 6}), carbide (SiC, TiC, NbC, WC) and nitride (TiN, BN, AlN, MgSiN{sub 2}, VN) micro/nanocrystals were prepared from related oxides and amorphous boron/active carbon/NaN{sub 3} with the assistance of metallic Na and elemental S. In-situ temperature monitoring showed that the reaction temperature could increase quickly to {approx}850 Degree-Sign C, once the autoclave was heated to 100 Degree-Sign C. Such a rapid temperature increase was attributed to the intense exothermic reaction between Na and S, which assisted the formation of borides, carbides and nitrides. The as-obtained products were characterized by XRD, SEM, TEM, and HRTEM techniques. Results in this report will greatly benefit the future extension of this approach to other compounds. - Graphical abstract: An additive-assisted approach is successfully developed for the syntheses of borides, carbides and nitrides micro/nanocrystals with the assistance of the exothermic reaction between Na and S. Highlights: Black-Right-Pointing-Pointer An additive-assisted synthesis strategy is developed for a number of borides, carbides and nitrides. Black-Right-Pointing-Pointer The reaction mechanism is demonstrated by the case of SiC nanowires. Black-Right-Pointing-Pointer The formation of SiC nanowires is initiated by the exothermic reaction of Na and S.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Ti concentration on the structure and texture of SiTiOC glasses

Five different silicon-titanium organic-inorganic hybrid materials were prepared by the reaction of tetraethoxysilane, titanium tetrabutoxide and silanol-terminated polydimethylsiloxane. Si-Ti oxycarbide glasses were prepared by pyrolysis of the hybrid materials in nitrogen atmosphere in the range of 400 to 1500 deg. C. The obtained Si-Ti oxycarbide materials were characterized by Fourier Transform-Infra Red spectroscopy, X-ray-diffraction, mercury porosimetry and SEM. The study indicated that the reactivity towards water increases up to 1000 deg. C, at higher temperatures it decreases for all samples. During the pyrolysis, Ti atoms were incorporated into the silicate network leading to the formation of Si-Ti oxycarbide glasses, except with sample containing 7% of Ti which presented also the formation of {beta}-SiC and TiC crystalline phases. The porosity was increased up to 600 deg. C and then decreased tending to disappear at 1500 deg. C. When the titanium concentration increased from 1 to 3% in the oxycarbide glass, the porosity decreased; for higher concentration, an increase in the porosity was observed.

36 MATERIALS SCIENCE↗

Microstructural characterisation of nanocomposite nc-MeC/a-C coatings on oxygen hardened Ti-6Al-4V alloy

Nanocomposite coatings are novel, important systems composed of two or more nanocrystalline, or nanocrystalline and amorphous, phases. Such coatings offer a possibility of tailoring the coating microstructure and achieving new improved properties of coated materials. In this work a duplex surface treatment, consisting of an oxygen diffusion treatment and deposition of low friction nanocomposite nc-MeC/a-C (Me = transition metal, Ti, W or Cr) coatings, was applied for improvement of the Ti-6Al-4V alloy properties. The coatings composed of nanocrystallites of transition metal carbides (TiC or Cr{sub x}C{sub y} or WC) embedded in hydrogen-free amorphous carbon (a-C) matrix were deposited onto the surface of an oxygen hardened Ti-6Al-4 V alloy substrate by means of a simple DC magnetron sputtering. A nano/microstructure of the substrate material and coatings has been examined by scanning- and transmission electron microscopy complemented with the results of X-ray diffraction analyses. It was found that the nanocomposite coatings are composed of different carbide nanocrystals (with sizes of a few nanometres) embedded in an amorphous carbon matrix. The results of qualitative and quantitative analyses of the nanocrystalline phase in the coatings with use of high-resolution transmission electron microscopy combined with image analysis are given in the paper. An effect of the nano/microstructure parameters of the coated alloy onto its micro-mechanical (nanohardness and Young's modulus) and tribological properties (wear resistance and friction coefficient) is discussed in the paper.

36 MATERIALS SCIENCE↗

Structure and tribological properties of steel after non-vacuum electron beam cladding of Ti, Mo and graphite powders

The non-vacuum electron beam cladding technique was used to fabricate layers alloyed with Ti, Mo and C on the surface of low-alloyed steel. Two types of experiments were carried out. In the first experiment, a mixture of Ti and graphite powders was used for cladding; in the second, a mixture of Ti, Mo and graphite powders was used for cladding. CaF{sub 2} powder or a mixture of CaF{sub 2} and LiF powders was used as flux. The thickness of the cladded layers was in the range of 2–2.2 mm. The structure of the layers was studied using optical microscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD). The microhardness after cladding of the layers fabricated by cladding of Ti and graphite powders was 8–9 GPa, while the microhardness of layers with Mo additions reached 11–12 GPa. The highest wear resistance at sliding friction and friction in abrasive environment was reached in the samples fabricated using Ti, Mo and graphite mixture due to the higher hardness and the martensite–austenite structure of the matrix. The wear resistance against fixed abrasive particles was 2.4 times higher compared to that of carburized and quenched steel. - Highlights: • Ti, C and Mo mixture of powders was cladded using non-vacuum electron beam treatment. • The depth of the cladded layers was 2.0 … 2.2 mm. • The microhardness of layer with Mo, Ti and C additions reached ~ 11 … 12 GPa. • The hardening of the layers caused by the formation of TiC particles and martensitic matrix • Wear resistance of cladded coatings was 2.4 higher than carburized steel.

36 MATERIALS SCIENCE↗

Micro-structural evolution during diffusion bonding of C-SiC/C-SiC composite using Ti interlayer

Highlights: • Formation of Ti{sub 3}SiC{sub 2} MAX phase in the joint of C-SiC composite • EBSD revealed three zone microstructure of the joint • Formation of a thin continuous layer of TiSi{sub 2} • The apparent shear strength of 19 MPa - Abstract: Diffusion bonding of C-SiC composite was achieved with Ti interlayer at 1500 °C for 3 h with the applied pressure of 20 MPa. The joined C-SiC composite showed the apparent shear strength of 19 MPa and the sample fractured away from the joint. The microstructure of joint consists of Ti{sub 3}SiC{sub 2} MAX phase, TiSi{sub 2} and TiC in which Ti{sub 3}SiC{sub 2} was the major phase. The distribution of phases in the microstructure of joint was categorized into three different zones based on electron backscattered diffraction (EBSD) results. The first zone consists of a thin continuous TiSi{sub 2} phase, which was followed by a thick zone of Ti{sub 3}SiC{sub 2} MAX phase. In the middle of the sample, a mix phase zone was found. The reaction mechanism was established for the evolution above microstructure of joined C-SiC composite.

36 MATERIALS SCIENCE↗

Selective growth of Ni4Ti3 precipitate variants induced by complicated cyclic stress during laser additive manufacturing of NiTi-based composites

Highlights: • The NiTi-based composites were in-situ synthesized by SLM. • Ni{sub 4}Ti{sub 3} could tailor the phase transformation temperature of TiC/NiTi composites. • A three-dimensional stress field modeling of TiC/NiTi composites was established. • The relationship between growth of Ni{sub 4}Ti{sub 3} variants and cyclic stress was disclosed. - Abstract: NiTi-based composites were in-situ synthesized by selective laser melting (SLM) additive manufacturing technology with formation of a great many Ni{sub 4}Ti{sub 3} precipitates. The differential scanning calorimetry (DSC) were carried out to exhibit the similar phase transformation temperature (A{sub s} = 51.82 °C, A{sub f} = 94.02 °C, M{sub s} = 55.87 °C and M{sub f} = 18.93 °C) by comparing with that of SLM-fabricated equi-atomic NiTi alloy, which could be attributed to the compensation of Ni{sub 4}Ti{sub 3} precipitates for the effect of an addition of TiC particles. Three different Ni{sub 4}Ti{sub 3} precipitate variants ((111){sub R}//(1 1-bar 1-bar ){sub B2}, (111){sub R}//( 1-bar 1-bar 1){sub B2}, and (111){sub R}//( 1-bar 1 1-bar ){sub B2}) with various precipitate diameters were observed within SLM fabricated part, showing apparently selective growth behavior. By high-resolution transmission electron microscopy, severe lattice defects formed surrounding the smaller variant, while relatively intact lattice structure was found around the larger one, which indicated that high strain energy was produced in the interface between the matrix and the smaller variant. Furthermore, finite element simulation method was applied to disclose the evolution features of complicated cyclic stress during SLM processing of TiC/NiTi composites. By predicting, the main constraint mode within as-fabricated track was tensile stress effect. Based on the redistribution behavior of thermal stress and the coupling effect between the thermal stress and strain field induced by Ni{sub 4}Ti{sub 3} precipitate, the selective growth mechanism of Ni{sub 4}Ti{sub 3} variant was revealed.

36 MATERIALS SCIENCE↗

Tailoring the interfacial microstructure and mechanical strength of SiC ceramic joints using joining temperature and interlayer thickness

Highlights: • Bonding temperature could be decreased from 1600 °C to 1300 °C by inserting the Ti foil between SiC and Ta-5W. • The initial thickness interlayer and the number of interlayer had a significant influence on interface bonding. • Layered reaction layers consisting of carbides and silicide formed at the SiC/Ti/Ta-5W interfaces. • The joint strength depended mainly on the reaction layer thickness, especially the thickness of silicide layer. - Abstract: Silicon carbide ceramic joints solid state diffusion bonded by spark plasma sintering with Ti/Ta-5W/Ti multi-interlayer in the temperature range from 1250 °C to 1500 °C were investigated in detail in terms of interfacial microstructure, elemental diffusion, phase constituents, shear strength, and fracture morphology. Layered reaction layers consisting of carbides (TiC, Ti{sub 3}SiC{sub 2}, (Ta,Ti,W)C), silicide ((Ta,Ti,W){sub 5}Si{sub 3}) and Ta-rich solid solution (Ta,Ti,W) formed at the SiC/Ti/Ta-5W interfaces. It was found that joining temperature could be decreased from 1600 °C to 1300 °C by inserting the Ti foil between SiC and Ta-5W. Nevertheless, an attempt to further decrease the joining temperature to 1250 °C failed even using a thin Ti foil. The initial thickness interlayer and the number of interlayer had an influence on the interfacial diffusion bonding at SiC/Ti interface. Higher joining temperature was needed to achieve a tough interface joining for a thick interlayer compared with a thin interlayer. The increase of interlayer number also required higher joining temperature. The shear strength reached 123.5 ± 25.3 MPa for the joint diffusion bonded at 1300 °C.

36 MATERIALS SCIENCE↗

Development of pore-free Ti-Al-C MAX/Al-Si MMC composite materials manufactured by squeeze casting infiltration

Highlights: • Open-porous MAX phase preforms were synthesized by Microwave Assisted Self-propagating High-temperature Synthesis • Manufactured preforms were infiltrated by Al-Si alloy with the use of Squeeze Casting method to create pore-free composites • Obtained materials were characterized by the means of SEM, TEM and XRD analyses • Mechanical properties were tested and discussed in relation to the microstructures An innovative method of manufacturing of Ti-Al-C MAX/Al-Si MMC composite materials was developed using squeeze casting infiltration of open-porous MAX phase preforms. Self-propagating High-temperature Synthesis (SHS) in microwave-assisted mode was applied for the creation of preforms in the Ti-Al-C system, that were subsequently infiltrated with Al-Si alloy to create dense composite materials. Microstructure and phase composition, structural defects and potential impacts between constituents of manufactured composites were characterized by the means of SEM and TEM microscopies and XRD analysis. No undesired reaction at the interface was observed, but TiC inclusions were identified in the material. Among the mechanical properties, the instrumental Young's modulus and Vickers hardness were established. The hardness and the elastic modulus of the matrix were enhanced 4 to 5 times. Wear behaviour was tested with a “pin-on-flat” method with the reciprocating motion for different load values (0.1, 0.2 and 0.5 MPa) for tool steel counterpart. Wear resistance of the composite material (WR = 1.6–2.3 × 10{sup −4} mm{sup 3}/Nm) was twofold higher than for the sole matrix (WR = 3.5–4.8 × 10{sup −4} mm{sup 3}/Nm). The developed manufacturing method allows the effective fabrication of pore-free MAX phase based MMC composite materials, with significantly higher wear resistance than the widely applied Al-Si alloys.

36 MATERIALS SCIENCE↗