Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TEMPERATURE COEFFICIENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Effects of temperature-dependent molecular absorption coefficients on the thermal infrared remote sensing of the earth surface

The effect of temperature-dependent molecular absorption coefficients on thermal infrared spectral signatures measured from satellite sensors is investigated by comparing results from the atmospheric transmission and radiance codes LOWTRAN and MODTRAN and the accurate multiple scattering radiative transfer model ATRAD for different atmospheric profiles. The sensors considered include the operational NOAA AVHRR and two research instruments planned for NASA's Earth Observing System (EOS): MODIS-N (Moderate Resolution Imaging Spectrometer-Nadir-Mode) and ASTER (Advanced Spaceborne Thermal Emission and Reflection Radiometer). The difference in band transmittance is as large as 6 percent for some thermal bands within atmospheric windows and more than 30 percent near the edges of these atmospheric windows. The effect of temperature-dependent molecular absorption coefficients on satellite measurements of sea-surface temperature can exceed 0.6 K. Quantitative comparison and factor analysis indicate that more accurate measurements of molecular absorption coefficients and better radiative transfer simulation methods are needed to achieve SST accuracy of 0.3 K, as required for global numerical models of climate, and to develop land-surface temperature algorithms at the 1-K accuracy level.

Wan, Zhengming↗

A method of computing the transient temperature of thick walls from arbitrary variation of adiabatic-wall temperature and heat-transfer coefficient

A method of calculating the temperature of thick walls has been developed in which the time series and the response to a unit triangle variation of surface temperature concepts are used, together with essentially standard formulas for transient temperature and heat flow into thick walls. The method can be used without knowledge of the mathematical tools of its development. The method is particularly suitable for determining the wall temperature in one-dimensional thermal problems in aeronautics where there is a continuous variation of the heat-transfer coefficient and adiabatic-wall temperature. The method also offers a convenient means for solving the inverse problem of determining the heat-flow history when temperature history is known.

Hill, P R↗

Invar and Elinvar type amorphous Fe-Cr-B alloys with high corrosion resistance

Amorphous (Fe(1-x)Cr(x))85B15 alloys (x = 0 to 0.15) were prepared from the melts by rapid quenching using a single roller techinque, and their Invar and Elinvar characteristics and corrosion resistance were investigated. With an increase in chromium content the Curie temperature and the saturation magnetic moment per iron atom decreased monotonically, while the crystallization temperature incresed gradually. The thermal expansion coefficient alpha around room temperature became slightly larger with increasing chromium content. Nevertheless, these amorphous alloys exhibited excellent Invar characteristics below the Curie temperature. The value of Young's modulus increased remarkably in a relatively low magnetic field and then saturated at a field of about 80 kA/m, showing a large delta E effect. Its value as well as a longitudinal linear magnetostriction became smaller with an increase in chromium content. The temperature coefficient of Young's modulus changed from postive to negative, and the temperature range showing the Elinvar characteristics became narrower with chromium content. The temperature coefficient of delay time determined from the values of alpha and e was very small. The corrosion resistance of these alloys was extremely improved by chromium addition.

Kikuci, M.↗

Improved temperature dependence of rate coefficients for rotational state-to-state transitions in H 2 O + H 2 O collisions

Aims. We present an improved database of temperature-dependent rate coefficients for rotational state-to-state transitions in H 2 O + H 2 O collisions. The database includes 231 transitions between the lower para-states of H 2 O and 210 transitions between its lower ortho-states (up toj= 7) and can be employed in cometary and planetary applications up to the temperature of 1000 K. Methods. We developed and applied a new general method that allows the generation of rate coefficients for excitation and quenching processes that automatically satisfy the principle of microscopic reversibility and also helps to cover the range of low collision energies by interpolation of cross sections between the process threshold and the computed data points. Results. We find that in the range of intermediate temperatures, 150

Astronomy & Astrophysics↗

Characterization of the pressure coefficient of manganin and temperature evolution of pressure in piston-cylinder cells

Here, we report measurements of the temperature- and pressure-dependent resistance, R ( T , p ), of a manganin manometer in a 4 He-gas pressure setup from room temperature down to the solidification temperature of 4 He ( T solid ~ 50 K at 0.8 GPa) for pressures, p , between 0 GPa and ~0.8 GPa. The same manganin wire manometer was also measured in a piston-cylinder cell (PCC) from 300 K down to 1.8 K and for pressures between 0 GPa and ~2 GPa. From these data, we infer the temperature and pressure dependence of the pressure coefficient of manganin, α ( T , p ), defined by the equation R p = (1 + αp ) R 0 , where R 0 and R p are the resistances of manganin at ambient pressure and finite pressure, respectively. Our results indicate that upon cooling, α first decreases, then goes through a broad minimum at ~120 K, and increases again toward lower temperatures. In addition, we find that α is almost pressure-independent at T ≳ 60 K up to p ~ 2 GPa, but shows a pronounced p dependence at T ≲ 60 K. Using this manganin manometer, we demonstrate that p overall decreases with decreasing temperature in the PCC for the full pressure range and that the size of the pressure difference between room temperature and low temperatures ( T = 1.8 K), Δ p , decreases with increasing pressure. We also compare the pressure values inferred from the manganin manometer with the low-temperature pressure, determined from the superconducting transition temperature of elemental lead (Pb). As a result of these data and analysis, we propose a practical algorithm to infer the evolution of pressure with temperature in a PCC.

47 OTHER INSTRUMENTATION↗

The population of high atomic levels at low temperatures.

Calculated coefficients relating the population in level n to its value in equilibrium are presented for various atomic levels under conditions of low temperature, density, and thermal radiation fields that may be expected in the interstellar medium. A thermal continuum such as that produced by an H II region is found to substantially change both the departure coefficients and their slope under conditions of low density.

Dupree, A. K.↗

Effect of temperature on optical fiber transmission

Results are presented concerning the effects of temperature on the transmission properties of various optical fibers including a silicone plastic clad, an acrylic plastic clad, and CVD step-index fibers both with and without polyurethane jackets. Results are presented for the normalized transmitted power vs temperature, the index of refraction vs temperature, and induced attenuation coefficients vs temperature. The data show that the intrinsic transmission of a CVD fiber is independent of temperature over the -110 to +150 C range. Plastic clad fused silica fibers are subject to transmission losses at lower temperatures due to changes in the optical index of the cladding polymer. Acrylic-clad and plastic-clad silica fibers also show transmission losses at lower temperatures, but to lesser extents.

Yeung, W. F.↗

Evidence of atmospheric gravity wave perturbations of the Brunt-Vaisala frequency in the atmosphere

A series of high altitude, medium resolution, measurements of temperature, pressure and turbulence have been performed by the Air Force Geophysics Laboratory. These measurements were conducted using the VIZ Manufacturing Co. microsondes with attached micro-thermal probes measuring the temperature structure coefficient. A typical atmospheric temperature measurement is given. Several small temperature inversions are evident in the troposphere. The stratosphere is marked with numerous fluctuations in the temperature profile. Microsondes provide temperature and pressure measurements every 4 seconds up to a maximum altitude of 30 km (MSL). Since the average ascent rate is 5 m/s, the altitude interval between the measurement reports is 20 m. The potential temperature is calculated from the temperature and pressure. Spectral analysis of atmospheric Brunt-Vaisala frequencies reveal spectra similiar to the velocity spectra of Dewan et al. (1984), Daniels (1982), and Endlich and Singleton (1969). The Brunt-Vaisala spectra indicate the existence of separate, distinguishable wave modes.

Good, R. E.↗

Ionization of NO at high temperature

Rate coefficients for ionization produced in collision of N and O atoms and the reverse dissociative recombination of NO(+) and electrons is redeveloped so as to provide the specific rate dependence on translational, vibrational, and free-electron temperatures. At equilibrium, the results compare favorably with experimental data over a wide range of temperature.

Hansen, C. Frederick↗

Closure theory for high-collisionality multi-ion plasmas

A general formalism is developed to construct and solve a system of linearized moment equations for parallel and perpendicular closures in high-collisionality plasmas. It is applicable for multiple ion species with arbitrary masses, temperatures, charges, and densities. The convergence of closure coefficients is evaluated by increasing the number of moments from 2 to 32 for scalar, vector, and rank-2 tensor moments. As an example, the complete set of closure coefficients for a deuterium-carbon plasma over the entire Hall parameter range is presented. Furthermore, the closure coefficients at various temperature ratios show that the one-temperature closure coefficients can differ significantly from the two-temperature coefficients.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling X-Ray Photoionized Plasmas: Ion Storage Ring Measurements of Low Temperature Dielectronic Recombination Rate Coefficients for L-Shell Iron

Iron L-shell ions (Fe XVII to Fe XXIV) play an important role in determining the line emission and thermal and ionization structures of photoionized gases. Existing uncertainties in the theoretical low temperature dielectronic recombination (DR) rate coefficients for these ions significantly affects our ability to model and interpret observations of photoionized plasmas. To help address this issue, we have initiated a laboratory program to produce reliable low temperature DR rates. Here, we present some of our recent results and discuss some of their astrophysical implications.

Savin, D. W.↗

On ozone correlation with meteofields in the Northern Hemisphere

The correlation coefficients of temperature and geopotential heights at various levels with total ozone and its vertical distribution have been analyzed, using the ground based and ozone sounding data. Two independent groups of factors affect total ozone. The first group - the geopotential values of the troposphere - stratosphere border (100-500 mb) manifest themselves most of all in the middle latitudes. Pertaining to this group is the total ozone correlation with the tropopause height and temperature at 500 mb. The correlation coefficients are negative (-0.55 -0.65) and little depend on the season. Related to this factor is a high (up to 0.8) correlation of ozone partial pressure with the temperature in the lower stratosphere. The second group is the geopotential and temperature values at the 10-30 mb coefficients (up to 0.6) are observed in winter in the subpolar latitudes. In summer they are substantially lower - about 0.1.

Kadygrova, Tatiana V.↗