Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Structural variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Hyperion Studies Of Crop Stress In Mexico

Satellite-based measurements of crop stress could provide much needed information for cropland management, especially in developing countries where other precision agriculture technologies are too expensive (Pierce and Nowak 1999; Robert 2002). For example, detection of areas that are nitrogen deficient or water stressed could guide fertilizer and water management decisions for all farmers within the swath of the satellite. Several approaches have been proposed to quantify canopy nutrient or water content based on spectral reflectance, most of which involve combinations of reflectance in the form of vegetation indices. While these indices are designed to maximize sensitivity to leaf chemistry, variations in other aspects of plant canopies may significantly impact remotely sensed reflectance. These confounding factors include variations in canopy structural properties (e.g., leaf area index, leaf angle distribution) as well as the extent of canopy cover, which determines the amount of exposed bare soil within a single pixel. In order to assess the utility of spectral indices for monitoring crop stress, it is therefore not only necessary to establish relationships at the leaf level, but also to test the relative importance of variations in other canopy attributes at the spatial scale of the remote sensing measurement. In this context, the relative importance of a given attribute will depend on (1) the sensitivity of the reflectance index to variation in the attribute and (2) the degree to which the attribute varies spatially and temporally.

Lobell, David B.↗
NASA NTRS1972

Atmospheric pressure, density, temperature and wind variations between 50 and 200 km

Data on atmospheric pressure, density, temperature and winds between 50 and 200 km were collected from sources including Meteorological Rocket Network data, ROBIN falling sphere data, grenade release and pitot tube data, meteor winds, chemical release winds, satellite data, and others. These data were analyzed by a daily difference method and results on the distribution statistics, magnitude, and spatial structure of the irregular atmospheric variations are presented. Time structures of the irregular variations were determined by the analysis of residuals from harmonic analysis of time series data. The observed height variations of irregular winds and densities are found to be in accord with a theoretical relation between these two quantities. The latitude variations (at 50 - 60 km height) show an increasing trend with latitude. A possible explanation of the unusually large irregular wind magnitudes of the White Sands MRN data is given in terms of mountain wave generation by the Sierra Nevada range about 1000 km west of White Sands. An analytical method is developed which, based on an analogy of the irregular motion field with axisymmetric turbulence, allows measured or model correlation or structure functions to be used to evaluate the effective frequency spectra of scalar and vector quantities of a spacecraft moving at any speed and at any trajectory elevation angle.

Justus, C. G.↗
NASA NTRS2002

Tensile Properties of Hydrogels and of Snake Skin

Stimulus-responsive or 'smart' gels are of potential interest as sensors and actuators, in industrial separations, and as permeable delivery systems. In most applications, a certain degree of mechanical strength and toughness will be required, yet the large-strain behavior of gels has not been widely reported. Some exceptions include work on gelatin and other food gels, some characterization of soft gels applicable for in-vitro cell growth studies, and toughness determinations on commercial contact lens materials. In general, it can be anticipated that the gel stiffness will increase with increasing degree of crosslinking, but the tensile strength may go through a maximum. Gel properties can be tailored by varying not only the degree of crosslinking, but also the polymer concentration and the nature of the polymer backbone (e.g. its stiffness or solubility). Polypeptides provide an especially interesting case, where secondary structure affects trends in moduli and conformational transitions may accompany phase changes. A few papers on the tensile properties of responsive gels have begun to appear. The responsive hydrogel chosen for the present study, crosslinked hydroxypropylcellulose, shrinks over a rather narrow temperature range near 44 C. Some vertebrate skin is also subject to substantial strain. Among reptiles, the morphologies of the skin and scales show wide variations. Bauer et al. described the mechanical properties and histology of gecko skin; longitudinal tensile properties of snake skin were examined by Jayne with reference to locomotion. The present measurements focus on adaptations related to feeding, including the response of the skin to circumferential tension. Tensile properties will be related to interspecific and regional variation in skin structure and folding.

Hinkley, Jeffrey A.↗
NASA NTRS1992

Structural analysis of an NDE-inspected carbon-carbon component

In this research, it is demonstrated that the integration of nondestructive evaluation with the finite element method (a quantitative NDE/FEM approach) can be used for analysis and behavior prediction of advanced materials, such as fiber composites, after processing and during in-service testing. First, stress, strain, and energy data were calculated by the finite element method for square plates with a 10 percent difference in the material properties between specified segments, i.e., between the center and the outside section or between two halves of the plate. This demonstrated the efficiency of the method in predicting variations in the structural behavior based on small material property differences. Then, finite element analyses and actual axial compression tests were performed on a Space Shuttle brake stator made from woven carbon-carbon composites. The material properties used in the numerical modeling of the stator were previously characterized at a large number of points on the component by quantitative NDE-procedures, i.e., ultrasonics and radiography. The results from the experimental compressive loading tests were used to verify the NDE/FEM results. Good agreement was found for most parameters.

Striz, A. G.↗
NASA NTRS2003

Spatial and Temporal Patterns of Tidal Dissipation in Synchronous Satellites

Tidal heating is an important energy source for several solar system bodies, and there is a wide-spread perception that the pattern of surface heat flow is diagnostic of internal structure. We wish to clarify that situation. Our analysis depends upon two important assumptions: First, that heat transport is dominated by conduction. Second, that the body can be modeled by a sequence of spherically symmetric layers, each with a linear visco-elastic rheology. Under these assumptions, surface heat flow patterns in tidally dominated satellites will reflect radially integrated dissipation patterns. For synchronously rotating satellites with zero obliquity, this pattern depends quite strongly on orbital eccentricity but relatively little on purely radial variations in internal structure. The total amount of heat generated within the body does depend sensitively on internal structure, but the spatial pattern is rather insensitive to structure, especially at low orbital eccentricities.

Bills, Bruce G.↗
NASA NTRS1987

Satellite-derived attributes of cloud vortex systems and their application to climate studies

Defense Meteorological Satellite Program (DMSP) visible and infrared mosaics are analyzed in conjunction with synoptic meteorological observations of sea level pressure (SLP) and upper-air height to derive composite patterns of cyclonic cloud vortices for the Northern Hemisphere. The patterns reveal variations in the structure and implied dynamics of cyclonic systems at different stages of development that include: (1) increasing vertical symmetry of the lower-level and upper-air circulations and (2) decreasing lower-tropospheric thicknesses and temperature advection, associated with increasing age of the vortex. Cloud vortices are more intense in winter than in summer and typically reach maximum intensity in the short-lived prespiral signature stage. There are major structural differences among frontal wave, polar air, and 'instant occlusion' cyclogenesis types. Cyclones in the dissipation stage may reintensify (deepen), as denoted by the appearance in the imagery of an asymmetric cloud band or a tightened spiral vortex. The satellite-derived statistics on cloud vortex intensity, which are seasonal- and latitude- as well as type-dependent, are applied to a preliminary examination of the synoptic manifestations of seasonal climate variability. An apparently close relationship is found, for two winter and spring seasons, between Northern Hemisphere cyclonic activity and variations in cryosphere variables, particularly the extent of Arctic sea ice. The results may indicate that increased snow and ice extent accompany a southward displacement of cyclonic activity and/or a predominance of deeper systems. However, there is also a strong regional dependence to the ice-synoptics feedback. This study demonstrates the utility of high resolution meteorological satellite imagery for studies of climate variations (climate dynamics).

Carleton, Andrew M.↗
NASA NTRS1978

Possible effects of solar UV variations on ozone and climate

A one-dimensional photochemical model was used to estimate the consequences of 27-day, 11-year, 22-year, and several-hundred-year variations of ultraviolet solar radiation on the concentration of ozone and nitrogen dioxide, and a one-dimensional radiative-convective equilibrium model was used to assess the joint effect of the radiation and concentration variations on the global temperature structure. For the several-hundred-year variations, the ozone column density increases by about 17.5% from minimum to maximum solar UV flux. For the 11-year period the ozone column density fluctuates by only about 7%, the lack of a full response being due to the time required for vertical motions to redistribute ozone from the altitudes of maximum production to those of maximum steady-state value. The 22-year period shows a full response, which the density varies by less than a percent for the 27-day period. Climatic consequences of these results are briefly discussed.

Pollack, J. B.↗
NASA NTRS2003

Groundbased Observations of Io [OI]6300 A Emission During the Galileo 124, 125, and Cassini Encounters

For the past 12 years, we have conducted a synoptic study of [OI] 6300 A emission from Io using the high-resolution (R 120,000) stellar spectrograph at the National Solar Observatory McMath-Pierce telescope. We showed in a recent paper that this emission allows us to use Io as a localized probe of the three-dimensional plasma torus structure. We report on selected recent spectroscopic observations of Io [OI] 6300 A emission obtained during the Galileo I24 (1999-Oct-11) and I25 (1999-Nov-26) encounters with Io and the Cassini Jupiter encounter (closest approach 2000-Dec-30). The exposure time for each spectrum was 15 minutes, with a 5.2 x 5.2 aperture centered on Io. We obtained over 100 spectra for the I24 encounter during 1999 October 9-13, over 100 spectra for the I25 encounter during 1999 November 24-30, and for the Cassini Jupiter flyby almost 600 spectra from 2000 December to 2001 January 21. We use our database of observations to track long- and short-term variations in torus structure. We compare our results to Galileo, Cassini, HST, and other groundbased contemporaneous observations to gain insight into torus variability and structure.

Oliversen, R. J.↗
NASA NTRS1995

Electron structures in the cusp/cleft region observed by DE 2 satellite

Narrow enhancements of electron precipitation, with energy and flux well above typical values, have been observed with Dynamics Explorer 2 (DE 2) in the cusp/cleft region. The electron flux in the energy range 0.2-1 keV was 2 orders of magnitude higher in these structures than in the magnetosheath and were seen in approximaetly 80% of DE 2 cusp crossings at ionospheric altitudes. Typically, there was more than one electron structure in each cusp crossing. The position of these structures showed a systematic variation: for poleward ion dispersion (energy decreases with increasing latitude), electron structures were seen more often on the equatorial boundary of the cusp, while for equatorward ion dispersion (energy decreases with decreasing latitude), electron structures were more often seen on the poleward boundary. This suggests that the electron structures are associated with newly reconnected field lines. The electron spectra suggest that field-aligned acceleration processes could produce the electron structures, first near the boundary of the cusp/cleft during the reconnection of field lines and then in the cusp/cleft during the motion of reconnected flux tubes through the polar ionosphere.

Escoubet, C. P.↗
NASA NTRS1989

How will changes in carbon dioxide and methane modify the mean structure of the mesosphere and thermosphere?

A global average model of the coupled mesosphere, thermosphere, and ionosphere is used to examine the effect of trace gas variations on the overall structure of these regions. In particular, the variations caused by CO2 and CH4 doublings and halvings from present day mixing ratios are presented. The results indicate that the mesosphere and thermosphere temperatures will cool by about 10 K and 50 K, respectively, as the CO2 and CH4 mixing ratios are doubled. These regions are heated by similar amounts when the trace gas mixing ratios are halved. Compositional redistributions also occur in association with changes in the temperature profile. The results show that global change will occur in the upper atmosphere and ionosphere as well as in the lower atmosphere during the 21st century.

Roble, R. G.↗
NASA NTRS1994

Line profiles variations from atmospheric eclipses: Constraints on the wind structure in Wolf-Rayet stars

Binary systems in which one of the components has a stellar wind may present a phenomenon known as 'wind' or 'atmospheric eclipse', in which that wind occults the luminous disk of the companion. The enhanced absorption profile, relative to the spectrum at uneclipsed orbital phases, can be be modeled to yield constraints on the spatial structure of the eclipsing wind. A new, very efficient approach to the radiative transfer problem, which makes no requirements with respect to monotonicity of the velocity gradient or size of that gradient, is presented. The technique recovers both the comoving frame calculation and the Sobolev approximation in the appropiate limits. Sample computer simulations of the line profile variations induced by wind eclipses are presented. It is shown that the location of the wind absorption features in frequency is a diagnostic tool for identifying the size of the wind acceleration region. Comparison of the model profile variations with the observed variations in the Wolf-Rayet (W-R)+6 binary system V444 Cyg illustrate how the method can be used to derive information on the structure of the wind of the W-R star constrain the size of the W-R core radius.

Auer, L. H.↗
NASA NTRS2016

A Fragment-Cloud Model for Breakup of Asteroids with Varied Internal Structures

As an asteroid descends toward Earth, it deposits energy in the atmosphere through aerodynamic drag and ablation. Asteroid impact risk assessments rely on energy deposition estimates to predict blast overpressures and ground damage that may result from an airburst, such as the one that occurred over Chelyabinsk, Russia in 2013. The rates and altitudes at which energy is deposited along the entry trajectory depend upon how the bolide fragments, which in turn depends upon its internal structure and composition. In this work, we have developed an analytic asteroid fragmentation model to assess the atmospheric energy deposition of asteroids with a range of structures and compositions. The modeling approach combines successive fragmentation of larger independent pieces with aggregate debris clouds released with each fragmentation event. The model can vary the number and masses of fragments produced, the amount of mass released as debris clouds, the size-strength scaling used to increase the robustness of smaller fragments, and other parameters. The initial asteroid body can be seeded with a distribution of independent fragment sizes amid a remaining debris mass to represent loose rubble pile conglomerations, can be given an outer regolith later, or can be defined as a coherent or fractured monolith. This approach enables the model to represent a range of breakup behaviors and reproduce detailed energy deposition features such as multiple flares due to successive burst events, high-altitude regolith blow-off, or initial disruption of rubble piles followed by more energetic breakup of the constituent boulders. These capabilities provide a means to investigate sensitivities of ground damage to potential variations in asteroid structure.

Asteroid↗
NASA NTRS1994

The broad emission line and continuum variations of Seyfert galaxies. 2: Broad-line region structure and kinematics

Spectroscopic observations of 13 Seyfert 1 galaxies made from 1979 to 1984 at Palomar and Steward Observatories were analyzed for H beta line profile variations. Significant profile changes were detected in five galaxies. These variations are often associated with changes in continuum and/or H beta strength, suggesting a causal connection between variations in the continuum source and changes in emission-line profiles. Moreover, the overall strength of H beta line flux variations is strongly correlated with line width in the far wings, whereas no such correlation was found in the line core. This finding is consistent with previous observations (Shuder 1982) which suggest that higher velocity gas lies closer to the central continuum source, since this inner gas would be expected to track variations more closely. In each of the five galaxies in which H beta line profile variations were detected, particularly NGC 5548 and Mrk 6, only two distinct line profile shapes were observed. Since intermediate profile types were not detected, the transition from one type to the other must occur rapidly (within a few months). These rapid line profile variations are thus consistent with numerous other studies which strongly point to a small broad-line region (BLR) size in Seyfert galaxies. Observational models of BLR kinematics and structure for each of the galaxies in the present sample are presented. Line asymmetries suggest that radial motions exist in the BLRs of most of these objects. Chaotic motions also appear to be quite common. However, evidence for rotational motion was observed in only one case. A model that is consistent with the majority of this sample incorporates both radial and chaotic motions combined with some form of external obscuration such as an optically and geometrically thick torus.

Rosenblatt, Edward I.↗
NASA NTRS1974

Thermal structure of the Martian atmosphere during the dissipation of the dust storm of 1971

The secular variation of the thermal structure of the Martian atmosphere during the dissipation phase of the 1971 dust storm is examined, using temperatures obtained by the infrared spectroscopy investigation on Mariner 9. For the latitude range -20 to -30, the mean temperature at the 2mb level is found to decrease from approximately 220K in mid-December 1971 to about 190K by June 1972 while for the 0.3mb level a decrease from 203K to 160K is observed. Over the same period, the amplitude of the diurnal temperature wave also decreased. Assuming a simplified radiative heating model, the dust optical depth is found to decrease approximately exponentially with an e-folding time of about 60 days at both the 0.3 and 2mb levels. Stokes-Cunningham settling alone cannot account for this behavior. Sedimentation models which include both gravitational settling and vertical mixing are developed in an effort to explain the time evolution of the dust.

Conrath, B. J.↗
NASA NTRS1975

Thermal structure of the Martian atmosphere during the dissipation of the dust storm of 1971

The secular variation of the thermal structure of the Martian atmosphere during the dissipation phase of the 1971 dust storm is examined, using temperatures obtained by the infrared spectroscopy investigation on Mariner 9. For the latitude range -20 to -30 deg, the mean temperature at the 2-mbar level is found to decrease from approximately 220 K in mid-December 1971 to about 190 K by June 1972 while for the 0.3-mbar level a decrease from 203 K to 160 K is observed. Over the same period, the amplitude of the diurnal temperature wave also decreased. Assuming a simplified radiative heating model, the dust optical depth is found to decrease approximately exponentially with an e-folding time of about 60 days at both the 0.3- and 2-mbar levels. Stokes-Cunningham settling alone cannot account for this behavior. Sedimentation models which include both gravitational settling and vertical mixing are developed in an effort to explain the time evolution of the dust.

Conrath, B. J.↗
NASA NTRS2021

Comprehensive Comparison of Airborne and Spaceborne SAR and LiDAR Estimates of Forest Structure in the Tallest Mangrove Forest on Earth

A recent suite of new global-scale satellite sensors and regional-scale airborne campaigns are providing a wealth of remote sensing data capable of dramatically advancing our current understanding of the spatial distribution of forest structure and carbon stocks. However, a baseline for forest stature and biomass estimates has yet to be established for the wide array of available remote sensing products. At present, it remains unclear how the estimates from these sensors compare to one another in terrestrial forests, with a clear dearth of studies in high carbon density mangrove ecosystems. In the tallest mangrove forest on Earth (Pongara National Park, Gabon), we leverage the data collected during the AfriSAR campaign to evaluate 17 state-of-the-art sensor data products across the full range of height and biomass known to exist globally in mangrove forest ecosystems, providing a much-needed baseline for sensor performance. Our major findings are: (Houghton, Hall, Goetz) height estimates are not consistent across products, with opposing trends in relative and absolute errors, highlighting the need for an adaptive approach to constraining height estimates (Panet al., 2011); radar height estimates had the lowest calibration error and bias, with further improvements using LiDAR fusion (Bonan, 2008); biomass variability and uncertainty strongly depends on forest stature, with variation across products increasing with canopy height, while relative biomass variation was highest in low-stature stands (Le Quéréet al., 2017); a remote sensing product's sensitivity to variations in canopy structure is more important than the absolute accuracy of height estimates (Mitchardet al., 2014); locally-calibrated area-wide totals are more representative than generalized global biomass models for high-precision biomass estimates. The findings presented here provide critical baseline expectations for height and biomass predictions across the full range of mangrove forest stature, which can be directly applied to current (TanDEM-X, GEDI, ICESat-2) and future (NISAR, BIOMASS) global-scale forest monitoring missions.

Atticus E.L. Stovall↗