Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spinel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Impact of Rare Earth Gd{sup 3+} Ions on Structural and Magnetic Properties of Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2−x}Gd{sub x}O{sub 4} Spinel Ferrite: Useful for Advanced Spintronic Technologies

In this article, we have synthesized the Gd{sup 3+}-doped Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2−x}Gd{sub x}O{sub 4} (x = 0.05, 0.07, 1.0) ferrite samples using solid-state reaction route. The effects of Gd{sup 3+} doping on structural, vibrational, electrical and magnetic properties were studied. Structural and vibrational properties were characterized by x-ray diffraction (XRD), Raman, and FTIR spectroscopy. XRD data indicate that the Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2−x}Gd{sub x}O{sub 4} ceramics crystallize in single-phase spinel cubic (Fd3m space group) structure. Infrared spectra show two strong absorption bands in the frequency range of 400–600 cm{sup −1} which were, respectively, attributed to tetrahedral and octahedral sites of the spinel ferrite. All the prepared samples show the typical dielectric dispersion having Maxwell–Wagner-type interfacial polarization. Decrease in dielectric constant and loss tangent has been observed with frequency and doping concentration. M − H plots reveal that all the samples exhibit ferrimagnetic nature at room temperature. A significant increase in the saturation magnetization has been observed upon the substitution of Gd{sup 3+} ions. All the as-prepared samples are isotropic and soft magnetic materials. These ferrite compounds are advantageous in advanced high-density data storage and high-frequency devices applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic and Structural Properties of Novel Neodymium-Tin Spinel Ferrite Nanoparticles

Novel spinel neodymium-tin ferrite nanoparticles (Nd{sub 0.5}Sn{sub 0.5}Fe{sub 2}O{sub 4}) have been synthesized by the coprecipitation method; x-ray diffraction (XRD), transmission electron microscopy (TEM), and superconducting quantum interference device magnetometer (SQUID) techniques were used to characterize the crystal structure, morphology, and magnetic properties. The spinel structure of a single phase is obtained according to XRD results. From TEM characterization results, we obtained a spherical morphology with an average of 13 nm. Magnetic measurement indicates that the nanoparticles have a superparamagnetic phase with a corresponding blocking temperature (T{sub B}) of about 360 K. These new nanomaterials can potentially be used in nanoelectronic devices, magnetic sensors, and hyperthermia application.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Unique hyper-kagome atomic order in geometrically frustrated iridium spinel-like structures

The review briefly outlines the results of authors’ theoretical research into unique hyperkagome atomic and orbital order in geometrically frustrated iridium spinel-like structures. The structural mechanism of formation of the hyper-kagome atomic order is established. It is shown that closed loops of Ir—Ir bonds represent a fundamental feature of the iridium spinel-like structures. Each loop consists of ten atoms, thus being a decagon. We assume that decagons are responsible for abnormal chemical and physical properties of crystals. A prediction is made of structural types of crystals in which the hyper-kagome atomic order can exist.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of SO 2 poisoning and regeneration on spinel containing CH 4 oxidation catalysts

Methane oxidation under periodic conditions and the oxygen storage capacity of a bilayer Pt/Pd/Al 2 O 3 over a Mn 0.5 Fe 2.5 O 4 spinel catalyst were studied before and after SO 2 exposure, and after simulated regeneration conditions. Prior to sulfur exposure, improvement in CH 4 oxidation conversion under periodic conditions compared to steady-state conditions was observed. After sulfur exposure at 100 °C, there was a loss in CH 4 oxidation performance and a loss of oxygen storage capacity of the spinel material. Here, the extent of regeneration from sulfur poisoning depends on the ability to induce the decomposition of sulfate species, and while all regeneration methods tested in this study did improve CH 4 conversion, regeneration methods under periodic conditions induced greater sulfur species desorption from the catalyst surface leading to improved CH 4 con version. Key regeneration parameters – temperature, feed composition, modulation amplitude and frequency – were optimized to induce S species decomposition and correlated to CH 4 oxidation activity recovery.

03 NATURAL GAS↗

Spinel high-entropy oxides (FeNiCrMnZnX) 3 O 4 (X = Al, mg) as anode materials for high-performance lithium-ion batteries

To address the high cost, cobalt dependency, and resource constraints typical of conventional high-entropy oxide (HEO) anodes, this study reports the successful synthesis of two Co-free, six-component spinel-type HEOs(FeNiCrMnZnAl) 3 O 4 (HEO-Al) and (FeNiCrMnZnMg) 3 O 4 (HEO-Mg), via a sol-gel method. The distinct effects of Al 3+ and Mg 2+ incorporation on the electrochemical performance and lithium storage kinetics were systematically investigated. XRD, Raman, and TEM characterizations confirm that both materials possess a pure spinel phase, uniform particle size, and homogeneous elemental distribution. Notably, electrochemical evaluations reveal that HEO-Al delivers a superior reversible capacity of 480.7 mAh g −1 after 100 cycles at 0.1 A g −1 , and maintains 354.5 mAh g −1 after 1000 long-term cycles at 1 A g −1 , significantly outperforming HEO-Mg. Kinetic analysis indicates that HEO-Al exhibits lower charge transfer resistance, a higher Li + diffusion coefficient, and a pseudocapacitive contribution of up to 82%. Furthermore, these findings demonstrate that Al substitution effectively optimizes the structural stability and lithium storage kinetics of Co-free HEOs, providing a viable strategy for designing low-cost, highly stable HEO anode systems.

Anode materials↗

(CrMnCoNiTi) 3 O 4 high-entropy spinel oxide as a high-performance electrode for supercapacitors

In this study, spinel-structured (CrMnCoNiTi)₃O₄ high-entropy oxides (HEOs) have been successfully synthesized using the solution combustion method, and their performance as supercapacitor electrode materials was investigated. These HEOs exhibit excellent performance, stemming from the unique high-entropy effect and lattice distortion. This structure effectively buffers volumetric strain during cycling, conferring the material with extremely high structural stability and specific capacity. The material demonstrates a high specific capacity of 491.5 C∙g⁻¹ at a current density of 0.5 A∙g⁻¹. Furthermore, it shows extraordinary cycling stability: after 10,000 charge/discharge cycles at 5 A∙g⁻¹, the capacity retention rate is 99%, and the Coulombic efficiency consistently remains close to 100%. Ex-situ structural characterizations further reveal that this excellent cycling durability originates from a cooperative multination valence reconstruction mechanism within an entropy-stabilized spinel framework. Additionally, a symmetric supercapacitor assembled using this material and 1 M KOH electrolyte successfully extended the working voltage to 1.2 V. This research highlights the great potential of high-entropy oxides in synergizing high energy density and ultra-long cycling life, laying a solid foundation for the development of next-generation high-performance supercapacitor electrode materials.

High entropy oxides↗

Direct observation of MgO formation at cathode electrolyte interface of a spinel MgCo 2 O 4 cathode upon electrochemical Mg removal and insertion

Identifying a Mg 2+ insertion mechanism into Mg cathode is one crucial challenge of designing Mg batteries that own comparable specific energy to the lithium ion systems. Spinel Mg cathodes are attractive candidates mainly attributed to its high intercalation voltage and theoretical capacity, however, electrochemically removing Mg from its solid structure with identified capacity dedicated to actual reversible Mg intercalation introduce complications. Work presented here applies Scanning/Transmission Electron Microscopy with Energy Loss Spectroscopy and diffraction method to investigate the cathode electrolyte interface for a spinel MgCo 2 O 4 material electrochemically cycled in the presence of a non-aqueous, low water content Mg electrolyte. Findings at an atomic scale suggest a complete de-magnesiation is occurring for thin MgCo 2 O 4 particles upon electrochemical charging, but a vast majority of MgCo 2 O 4 shows formation of an amorphous MgO layer with a thickness of similar to ~10 nm at the cathode electrolyte interface. The amorphous MgO layer is directly jointed with the crystalline MgCo 2 O 4 at the outer edge of the cathode. Formation of MgO at the cathode electrolyte interface is believed to be the detrimental factor preventing further electrochemical cell cycling of MgCo 2 O 4 . A possible reaction pathway of intercalation-initiated surface conversion is proposed to explain reversible Mg insertion with MgCo 2 O 4 .

25 ENERGY STORAGE↗

Correlation between structural features and vis-NIR spectra of {alpha}-Fe{sub 2}O{sub 3} hematite and AFe{sub 2}O{sub 4} spinel oxides (A=Mg, Zn)

Iron (III) rich pigments MgFe{sub 2}O{sub 4} and ZnFe{sub 2}O{sub 4} spinel ferrites and {alpha}-Fe{sub 2}O{sub 3} hematite were synthesized by Pechini route and precipitation process, respectively. The compounds were characterized by X-ray diffraction (XRD), Moessbauer spectroscopy and visible-NIR spectroscopy. Diffuse reflectance spectra were interpreted in regard of structural features of the three oxides in order to correlate absorption bands positions with structural parameters. It has been demonstrated that the two main absorption edges occurring in visible range (400-800 nm) can be attributed to two 2p(O{sup 2-}){yields}3d(Fe{sup 3+}) charge transfers, the energy being directly linked to the distortion degree of the [FeO{sub 6}] octahedra. - Graphical abstract: UV-visible-NIR reflectance of iron red pigments: MgFe{sub 2}O{sub 4}, ZnFe{sub 2}O{sub 4} spinels and Fe{sub 2}O{sub 3} hematite, were analyzed in regard of their structural features: cationic distribution, geometry of the Fe{sup 3+} sites, iono-covalence of the bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic properties of the spinel-type Cu(Cr{sub 1-x}Hf{sub x}){sub 2}S{sub 4}

The spinel sulphide CuCr{sub 2}S{sub 4} is a metallic ferromagnet with a Curie temperature T{sub c}{approx_equal}380K, while CuHf{sub 2}S{sub 4} has no magnetic anomaly. Magnetic properties of the quaternary spinel-type Cu(Cr{sub 1-x}Hf{sub x}){sub 2}S{sub 4} system have been studied. With increasing x the ferromagnetic properties are weakened gradually from a predominant ferromagnetic, a spin-glass, finally to a simple paramagnetic behavior. For the composition of x{approx_equal}0.50, a re-entrant spin-glass phase could emerge, even though the Curie temperature is ill-defined as a ferromagnetic phase boundary. Specimens with x>=0.90 remain paramagnetic down to 4.2 K. A spin crossover phenomenon is found around 160 K in the specimens of x=0.50-0.70. A step-like anomaly is manifestly detected in the magnetization, which corresponds with the change of the spin state. This crossover indicates that the spin state converts from high temperature S=2 into low temperature S=3/2 states. In the ordered states in T<160K, the magnetic moment originates from only Cr{sup 3+} ions. - Spin crossover phenomenon in Cu(Cr{sub 1-x}Hf{sub x}){sub 2}S{sub 4}. A step-like anomaly is found around 160 K for x=0.50, 0.60, and 0.70 in the magnetization as a function of temperature. The inset shows the enlargement data for x=0.60. This crossover indicates that the spin state changes from high temperature S=2 to low temperature S=3/2 states.

36 MATERIALS SCIENCE↗

Stabilization of scandium rich spinel ferrite CoFe{sub 2−x}Sc{sub x}O{sub 4} (x≤1) in thin films

Scandium rich cobalt ferrites Co{sub y}Fe{sub 3−x−y}Sc{sub x}O{sub 4} with y~1 never obtained in bulk could be stabilized in pulsed laser deposited thin films. Scandium contents of up to x=1 are reached. The cell parameter increases versus x as awaited when considering the size of scandium. It is equal to 0.8620 nm for x=1, significantly higher than that of CoFe{sub 2}O{sub 4} (0.8396 nm). The lattice mismatch between the MgO (100) substrate and the scandium-containing spinel leads to an increased roughness. Cobalt is displaced from the octahedral site by Sc and mainly occupies the tetrahedral sites for high x values. - Graphical abstract: Magnification of the XRD patterns recorded on thin films of CoFe{sub 2-x}Sc{sub x}O{sub 4} for x=0, 0.45, 1 and 1.2, the arrows denote the (004) and (008) diffraction lines of the spinel phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simple synthetic route to manganese-containing nanowires with the spinel crystal structure

This report describes a new route to synthesize single-crystalline manganese-containing spinel nanowires (NWs) by a two-step hydrothermal and solid-state synthesis. Interestingly, a nanowire or nanorod morphology is maintained during conversion from MnO{sub 2}/MnOOH to CuMn{sub 2}O{sub 4}/Mg{sub 2}MnO{sub 4}, despite the massive structural rearrangement this must involve. Linear sweep voltammetry (LSV) curves of the products give preliminary demonstration that CuMn{sub 2}O{sub 4} NWs are catalytically active towards the oxygen evolution reaction (OER) in alkaline solution, exhibiting five times the magnitude of current density found with pure carbon black. - Highlights: • Synthesis of single-crystalline manganese-containing spinel nanowires. • Binary oxide nanowire converted to ternary oxide wire through solid state reaction. • Approach to structure conversion with shape retention could be generally applicable. • Copper and Manganese display multiple oxidation states with potential for catalysis. • CuMn{sub 2}O{sub 4} nanowires show promise as catalysts for the oxygen evolution reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of surface morphology and UFG on damping and mechanical properties of composite reinforced with spinel MgAl{sub 2}O{sub 4}-SiC core-shell microcomposites

Interface between ceramic particulate and matrix is known to control the response of the materials and functionality of the composite. Among numerous physical properties, grain structure of the materials has also played a significant role in defining the behaviour of metal matrix composites. Usually, silicon carbide (SiC) particles show poor interfacial wettability in aluminium melt. Herein, we were successfully synthesized magnesium oxide (MgO) and nanocrystalline magnesium aluminate (MgAl{sub 2}O{sub 4}) spinel coated silicon carbide (SiC) core-shell micro-composites through sol-gel technique to improve the wettability of dispersoids. Core-shell structures of submicron size were thoroughly investigated by various characterization techniques. Further, aluminium matrix composites incorporated with pristine SiC, MgO grafted SiC and MgAl{sub 2}O{sub 4} grafted SiC particles were fabricated by stir casting technique, respectively. Additionally, as-cast composites were processed via friction stir processing (FSP) technique to observe the influence of grain refinement on mechanical and damping properties. Electron back scattered diffraction (EBSD), Field emission scanning electron microscopy (FE-SEM) and X-ray energy dispersion spectroscopy (EDX) analysis were conducted for investigating grain size refinement, adequate dispersion, stability and de-agglomeration of encapsulated SiC particles in aluminium matrix. The mechanical as well as thermal cyclic (from − 100 to 400 °C) damping performance of the as-cast and friction stir processed composites were studied, respectively. Finally, the enhanced properties were attributable to reduced agglomeration, stabilization and proper dispersion of the tailored SiC particles Al matrix. - Highlights: •Synthesizing a novel coating layer of MgO and MgAl{sub 2}O{sub 4} spinel onto SiC particles •Significant improvement in UTS and hardness by reinforcing tailored SiC in Al •Significant grain refinements were obtained through FSP •SiC/MgAl{sub 2}O{sub 4}/Al exhibits ~ 61% higher storage modulus as compare to pure Al after FSP.

36 MATERIALS SCIENCE↗

Phthalic acid assisted nano-sized spinel LiMn{sub 2}O{sub 4} and LiCr{sub x}Mn{sub 2-x}O{sub 4} (x = 0.00-0.40) via sol-gel synthesis and its electrochemical behaviour for use in Li-ion-batteries

Nano-sized particles of spinel LiMn{sub 2}O{sub 4} and LiCr{sub x}Mn{sub 2-x}O{sub 4} (x = Cr; 0.00-0.40) have been synthesized using phthalic acid as chelating agent for the first time by sol-gel method. When compared to solid-state synthesis method, the sol-gel route reduces heating time of synthesize and to obtain particles of uniform surface morphology. The synthesized samples were characterized through thermo-gravimetric analysis (TGA), X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). SEM images of the parent compounds show nanospherical grains of LiMn{sub 2}O{sub 4} when compared to chromium-doped ones. XRD patterns of LiMn{sub 2}O{sub 4} ascertain amorphous nature and for high calcined LiCr{sub x}Mn{sub 2-x}O{sub 4} single phase highly crystalline patterns were obtained. TEM images of the parent and chromium-doped spinel particles depict individual grain morphology with well-separated grain boundaries. LiCr{sub 0.10}Mn{sub 1.90}O{sub 4} excels in discharge and cycling behaviour and offer higher columbic efficiency, when compared to un-doped LiMn{sub 2}O{sub 4}. Cyclic voltammograms of LiMn{sub 2}O{sub 4} and LiCr{sub x}Mn{sub 2-x}O{sub 4} exhibit oxidation and reduction peaks corresponding to Mn{sup 3+}/Mn{sup 4+} and Cr{sup 3+}/Cr{sup 4+}.

36 MATERIALS SCIENCE↗

Synthesis and characterization of spinel Co{sub 3}O{sub 4} octahedra enclosed by the {l_brace}1 1 1{r_brace} facets

Spinel Co{sub 3}O{sub 4} octahedra synthesized by a facile redox-precipitation method were investigated for the complete oxidation of methane. XRD analysis showed that the spinel structural Co{sub 3}O{sub 4} octahedra had a relatively strong (1 1 1) diffraction peak as compared with that of the irregular shaped Co{sub 3}O{sub 4} nanoparticles prepared by a conventional precipitation method. The results of methane combustion test demonstrated that the Co{sub 3}O{sub 4} octahedra had no catalytic activity at 300-500 deg. C, while the Co{sub 3}O{sub 4} irregular nanoparticles were highly active at the same reaction conditions. HRTEM studies revealed that the Co{sub 3}O{sub 4} octahedra were predominantly exposed by the low Miller-index {l_brace}1 1 1{r_brace} facets with the lowest surface energy, and the Co{sub 3}O{sub 4} irregular nanoparticles were exposed by various crystal facets. The results exhibited that the {l_brace}1 1 1{r_brace} facets with the low surface energy of the Co{sub 3}O{sub 4} octahedra resulted in the inert catalytic activity in the methane oxidation reaction.

36 MATERIALS SCIENCE↗

Synthesis and characterizations of Ni-Fe-spinel oxide core-shell nanoparticles

Core-shell Ni-Fe-ferrite nanoparticles with an average diameter of 14 nm and shell thickness of 3 nm were synthesized through a redox-transmetalation process. The alloy core and spinel oxide shell were verified by X-ray photoelectron spectroscopy, X-ray diffraction, and transmission electron microscopy. The hydrophobic oleylamine molecules on the surface were replaced by hydrophilic meso-2,3-Dimercaptosuccinic acid to make the nanoparticles to be water-soluble. X-ray diffraction study of the as-prepared core-shell nanoparticles indicates that they remained face centered cubic alloy core and spinel shell form in air. Magnetic measurements indicate that the core-shell nanoparticles exhibit superparamagnetic and exchange bias characteristics at 300 K and 5 K, respectively.

36 MATERIALS SCIENCE↗

Structural defects in AFe{sub 2}O{sub 4} (A = Zn, Mg) spinels

(Zn{sup 2+}/Mg{sup 2+})[Fe{sup 3+}]{sub 2}O{sub 4} spinel oxides can be refined as direct/fully inverted (respectively) spinels but considering cationic and anionic vacancies and/or interstitial atoms instead of a partial inversion rate of the A{sup 2+} and B{sup 3+} cations. The refinements results of the X-ray diffraction patterns and Moessbauer spectroscopy spectra are discussed and show the veracity of the new structural formalism.

36 MATERIALS SCIENCE↗

Optimization of reaction conditions in selective oxidation of styrene over fine crystallite spinel-type CaFe{sub 2}O{sub 4} complex oxide catalyst

The CaFe{sub 2}O{sub 4} spinel-type catalyst was synthesized by citrate gel method and well characterized by thermogravimetric analysis, atomic absorption spectroscopy, Fourier-transform infrared spectroscopy, X-ray diffraction and transmission electron microscopy. The crystallization temperature of the spinel particle prepared by citrate gel method was 600 {sup o}C which was lower than that of ferrite prepared by other methods. CaFe{sub 2}O{sub 4} catalysts prepared by citrate gel method show better activity for styrene oxidation in the presence of dilute H{sub 2}O{sub 2} (30%) as an oxidizing agent. In this reaction the oxidative cleavage of carbon-carbon double bond of styrene takes place selectively with 38 {+-} 2 mol% conversion. The major product of the reaction is benzaldehyde up to 91 {+-} 2 mol% and minor product phenyl acetaldehyde up to 9 {+-} 2 mol%, respectively. The products obtained in the styrene oxidation reaction were analyzed by gas chromatography and mass spectroscopy. The influence of the catalyst, reaction time, temperature, amount of catalyst, styrene/H{sub 2}O{sub 2} molar ratio and solvents on the conversion and product distribution were studied.

36 MATERIALS SCIENCE↗

Cellulose-precursor synthesis of nanocrystalline Co{sub 0.5}Cu{sub 0.5}Fe{sub 2}O{sub 4} spinel ferrites

Highlights: Black-Right-Pointing-Pointer Synthesis of spinel copper cobalt nanoferrite particles from a cellulose precursor for the first time. Control of nanosize and properties of nanoferrites can take place by varying the calcining temperature. The simple, low cost, easy cellulose process is a choice of nanoparticle processing technology. -- Abstract: Nanocrystalline Cu{sub 0.5}Co{sub 0.5}Fe{sub 2}O{sub 4} powders were prepared via a metal-cellulose precursor synthetic route. Cellulose was used as a fuel and a dispersing agent. The resulting precursors were calcined in the temperature range of 450-600 Degree-Sign C. The phase development of the samples was determined by using Fourier transform infrared (FT-IR) spectroscopy and powder X-ray diffraction (XRD). The field-dependent magnetizations of the nanopowders were measured by vibrating sample magnetometer (VSM). All XRD patterns are of a spinel ferrite with cubic symmetry. Microstructure of the ferrites showed irregular shapes and uniform particles with agglomeration. From XRD data, the crystallite sizes are in range of 16-42 nm. Saturation magnetization and coercivity increased with increasing calcining temperature due to enhancement of crystallinity and reduction of oxygen vacancies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗