Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Snow model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

Connecting Satellite Observations with Water Cycle Variables Through Land Data Assimilation: Examples Using the NASA GEOS-5 LDAS

A land data assimilation system (LDAS) can merge satellite observations (or retrievals) of land surface hydrological conditions, including soil moisture, snow, and terrestrial water storage (TWS), into a numerical model of land surface processes. In theory, the output from such a system is superior to estimates based on the observations or the model alone, thereby enhancing our ability to understand, monitor, and predict key elements of the terrestrial water cycle. In practice, however, satellite observations do not correspond directly to the water cycle variables of interest. The present paper addresses various aspects of this seeming mismatch using examples drawn from recent research with the ensemble-based NASA GEOS-5 LDAS. These aspects include (1) the assimilation of coarse-scale observations into higher-resolution land surface models, (2) the partitioning of satellite observations (such as TWS retrievals) into their constituent water cycle components, (3) the forward modeling of microwave brightness temperatures over land for radiance-based soil moisture and snow assimilation, and (4) the selection of the most relevant types of observations for the analysis of a specific water cycle variable that is not observed (such as root zone soil moisture). The solution to these challenges involves the careful construction of an observation operator that maps from the land surface model variables of interest to the space of the assimilated observations.

Land data assimilation↗
DOE OSTI2022

Forest Canopy Density Effects on Snowpack Across the Climate Gradients of the Western United States Mountain Ranges

Limitations inherent to field studies such as limited spatial and temporal coverage has made it very challenging, if not impossible, to explicitly disentangle the effect of canopy density from climate on snowpack dynamics. Hence, our understanding of how variations in canopy density can affect snow processes under diverse climate conditions has been limited. To address this knowledge gap, this study uses a physics-based modeling approach to represent most key processes that drive snow accumulation and melt in the open and forest with varied forest density, across the climate gradients of the Western U.S. mountain ranges, as represented by 228 Snow Telemetry (SNOTEL) locations. Simulations suggest that, under most winter climate conditions, canopy density exerts a strong influence on under-canopy snowpack dynamics and their controlling processes. Changing canopy density can shift the direction of the modeled differential peak snow accumulation and snow disappearance date (SDD) between the open and forest. For example, while simulated snowpack lasts longer in the open than the high-density forest at most wet/warm and dry/cold locations by up to 55 days, about 90% of all locations show a longer snow duration in the low-density forest by up to 27 days as compared to the open. Interannual variability in climate can also change the magnitude and direction of canopy impact on snow processes. By comparing model simulations to published field observations, and we also identify conditions that require additional field observations to improve process-scale understanding of forest-snow interaction.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2009

Satellite-Scale Snow Water Equivalent Assimilation into a High-Resolution Land Surface Model

An ensemble Kalman filter (EnKF) is used in a suite of synthetic experiments to assimilate coarse-scale (25 km) snow water equivalent (SWE) observations (typical of satellite retrievals) into fine-scale (1 km) model simulations. Coarse-scale observations are assimilated directly using an observation operator for mapping between the coarse and fine scales or, alternatively, after disaggregation (re-gridding) to the fine-scale model resolution prior to data assimilation. In either case observations are assimilated either simultaneously or independently for each location. Results indicate that assimilating disaggregated fine-scale observations independently (method 1D-F1) is less efficient than assimilating a collection of neighboring disaggregated observations (method 3D-Fm). Direct assimilation of coarse-scale observations is superior to a priori disaggregation. Independent assimilation of individual coarse-scale observations (method 3D-C1) can bring the overall mean analyzed field close to the truth, but does not necessarily improve estimates of the fine-scale structure. There is a clear benefit to simultaneously assimilating multiple coarse-scale observations (method 3D-Cm) even as the entire domain is observed, indicating that underlying spatial error correlations can be exploited to improve SWE estimates. Method 3D-Cm avoids artificial transitions at the coarse observation pixel boundaries and can reduce the RMSE by 60% when compared to the open loop in this study.

De Lannoy, Gabrielle J.M.↗
NASA NTRS2009

Studying Precipitation Processes in WRF with Goddard Bulk Microphysics in Comparison with Other Microphysical Schemes

A Goddard bulk microphysical parameterization is implemented into the Weather Research and Forecasting (WRF) model. This bulk microphysical scheme has three different options, 2ICE (cloud ice & snow), 3ICE-graupel (cloud ice, snow & graupel) and 3ICE-hail (cloud ice, snow & hail). High-resolution model simulations are conducted to examine the impact of microphysical schemes on different weather events: a midlatitude linear convective system and an Atlantic hurricane. The results suggest that microphysics has a major impact on the organization and precipitation processes associated with a summer midlatitude convective line system. The Goddard 3ICE scheme with the cloud ice-snow-hail configuration agreed better with observations ill of rainfall intensity and having a narrow convective line than did simulations with the cloud ice-snow-graupel and cloud ice-snow (i.e., 2ICE) configurations. This is because the Goddard 3ICE-hail configuration has denser precipitating ice particles (hail) with very fast fall speeds (over 10 m/s) For an Atlantic hurricane case, the Goddard microphysical scheme (with 3ICE-hail, 3ICE-graupel and 2ICE configurations) had no significant impact on the track forecast but did affect the intensity slightly. The Goddard scheme is also compared with WRF's three other 3ICE bulk microphysical schemes: WSM6, Purdue-Lin and Thompson. For the summer midlatitude convective line system, all of the schemes resulted in simulated precipitation events that were elongated in southwest-northeast direction in qualitative agreement with the observed feature. However, the Goddard 3ICE-hail and Thompson schemes were closest to the observed rainfall intensities although the Goddard scheme simulated more heavy rainfall (over 48 mm/h). For the Atlantic hurricane case, none of the schemes had a significant impact on the track forecast; however, the simulated intensity using the Purdue-Lin scheme was much stronger than the other schemes. The vertical distributions of model-simulated cloud species (e.g., snow) are quite sensitive to the microphysical schemes, which is an issue for future verification against satellite retrievals. Both the Purdue-Lin and WSM6 schemes simulated very little snow compared to the other schemes for both the midlatitude convective line and hurricane case. Sensitivity tests with these two schemes showed that increasing the snow intercept, turning off the auto-conversion from snow to graupel, eliminating dry growth, and reducing the transfer processes from cloud-sized particles to precipitation-sized ice collectively resulted in a net increase in those schemes' snow amounts.

Tao, W.K.↗
NASA NTRS2007

New, Improved Goddard Bulk-Microphysical Schemes for Studying Precipitation Processes in WRF

An improved bulk microphysical parameterization is implemented into the Weather Research and Forecasting ()VRF) model. This bulk microphysical scheme has three different options, 2ICE (cloud ice & snow), 3ICE-graupel (cloud ice, snow & graupel) and 3ICE-hail (cloud ice, snow & hail). High-resolution model simulations are conducted to examine the impact of microphysical schemes on two different weather events (a midlatitude linear convective system and an Atlantic hurricane). The results suggest that microphysics has a major impact on the organization and precipitation processes associated with a summer midlatitude convective line system. The Goddard 3ICE scheme with a cloud ice-snow-hail configuration agreed better with observations in terms of rainfall intensity and a narrow convective line than did simulations with a cloud ice-snow-graupel or cloud ice-snow (i.e., 2ICE) configuration. This is because the 3ICE-hail scheme includes dense ice precipitating (hail) particle with very fast fall speed (over 10 in For an Atlantic hurricane case, the Goddard microphysical schemes had no significant impact on the track forecast but did affect the intensity slightly. The improved Goddard schemes are also compared with WRF's three other 3ICE bulk microphysical schemes: WSM6, Purdue-Lin and Thompson. For the summer midlatitude convective line system, all of the schemes resulted in simulated precipitation events that were elongated in the southwest-northeast direction in qualitative agreement with the observed feature. However, the Goddard 3ICE scheme with the hail option and the Thompson scheme agree better with observations in terms of rainfall intensity, expect that the Goddard scheme simulated more heavy rainfall (over 48 mm/h). For the Atlantic hurricane case, none of the schemes had a significant impact on the track forecast; however, the simulated intensity using the Purdue-Lin scheme was much stronger than the other schemes. The vertical distributions of model simulated cloud species (i.e., snow) are quite sensitive to microphysical schemes, which is an important issue for future verification against satellite retrievals. Both the Purdue-Lin and WSM6 schemes simulated very little snow compared to the other schemes for both the midlatitude convective line and hurricane cases. Sensitivity tests are performed for these two WRF schemes to identify that snow productions could be increased by increasing the snow intercept, turning off the auto-conversion from snow to graupel and reducing the transfer processes from cloud-sized particles to precipitation-sized ice.

Tao, Wei-Kuo↗
DOE OSTI2024

Surface and Atmospheric Heating Responses to Spectrally Resolved Albedo of Frozen and Liquid Water Surfaces

Abstract Multiple Earth system models (ESMs) discretize surface albedo into two semi‐broadbands comprising the UV/visible and near‐infrared (NIR) wavelengths. Here, we use an offline single‐column radiative transfer model to investigate the radiative effects of spectrally resolving the surface albedo. We use the Snow, Ice, and Aerosol Radiative model, extended to simulate liquid water, to calculate snow, ice, and liquid water albedo. We flux‐weight the hyperspectral albedo into the coarser spectral bands used by the atmospheric shortwave radiative transfer model. We establish representative atmospheric profiles for the three surface types and compare their shortwave fluxes and atmospheric warming rates with the spectrally resolved albedo to those calculated with the semi‐broadband approximation. Spectrally resolved surface albedo over snow and ice reduces atmospheric warming by darkening the albedo of NIR bands, correcting the too‐strong surface absorption in visible bands, and too‐weak surface absorption in shortwave infrared bands caused by the semi‐broadband approximation. We explore the effects on surface and atmospheric warming rates of varying solar zenith angle, cloud cover, relative humidity, and snow grain/air bubble radii. The semi‐broadband albedo biases can exceed 10% and 2% for the surface and atmospheric net flux respectively, being particularly strong under conditions which alter the distributions of surface insolation (i.e., cloud cover or increased atmospheric water vapor). These results show that transmitting a higher resolution spectral radiation field between the atmosphere and surface reduces biases in surface absorption and atmospheric heating present in ESMs that currently use the semi‐broadband approximation.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1985

Snowmelt-runoff Model Utilizing Remotely-sensed Data

Remotely sensed snow cover information is the critical data input for the Snowmelt-Runoff Model (SRM), which was developed to simulatke discharge from mountain basins where snowmelt is an important component of runoff. Of simple structure, the model requires only input of temperature, precipitation, and snow covered area. SRM was run successfully on two widely separated basins. The simulations on the Kings River basin are significant because of the large basin area (4000 sq km) and the adequate performance in the most extreme drought year of record (1976). The performance of SRM on the Okutadami River basin was important because it was accomplished with minimum snow cover data available. Tables show: optimum and minimum conditions for model application; basin sizes and elevations where SRM was applied; and SRM strengths and weaknesses. Graphs show results of discharge simulation.

Rango, A.↗
NASA NTRS2024

Critical Load Exceedances for North America and Europe using an Ensemble of Models and an Investigation of Causes for Environmental Impact Estimate Variability: An AQMEII4 Study

Exceedances of critical loads for deposition of sulphur (S) and nitrogen (N) to different ecosystems were estimated using European and North American ensembles of air quality models, under Phase 4 of the Air Quality Model Evaluation International Initiative (AQMEII4), to identify where risk of ecosystem harm is expected to occur based on model deposition estimates. The ensembles were driven by common emissions and lateral boundary condition inputs. Model output was regridded to common North American and Europe 0.125° resolution domains, which were then used to calculate critical load exceedances. New, targeted deposition diagnostics implemented in AQMEII4 allowed an unprecedented level of post-simulation analysis to be carried out and facilitated the identification of specific causes of model-to-model variability in critical load exceedance estimates. New datasets for North American critical loads for acidity for forest soil water and aquatic ecosystems were combined with the ensemble deposition predictions to show a substantial decrease in the area and number of locations in exceedance between 2010 and 2016 (forest soils: 13.2 % to 6.1 %; aquatic ecosystems: 21.2 % to 11.4 %). All models agreed in the direction of the ensemble exceedance change between 2010 and 2016. The North American ensemble also predicted a decrease in both severity and total area in exceedance between the years 2010 and 2016 for eutrophication-impacted ecosystems in the USA (sensitive epiphytic lichen: 81.5 % to 75.8 %). The exceedances for herbaceous community richness also decreased between 2010 and 2016, from 13.9 % to 3.9 %. The uncertainty associated with the North American eutrophication results is high; there were sharp differences between the models in both predictions of total N deposition and the change in N deposition, and hence in the predicted eutrophication exceedances between the two years. The European ensemble was used to predict relatively static exceedances of critical loads with respect to acidification (4.48 % to 4.32 % from 2009 to 2010) while eutrophication exceedance increased slightly (60.2 % to 62.2 %). While most models showed the same changes in critical load exceedances as the ensemble between the two years, the spatial extent and magnitude of exceedances varied significantly between the models. The reasons for this variation were examined in detail by first ranking the relative contribution of different sources of sulphur and nitrogen deposition in terms of deposited mass and model-to-model variability in that deposited mass, followed by their analysis using AQMEII4 diagnostics, along with evaluation of the most recent literature. All models in both the North American and European ensembles had net annual negative biases with respect to observed wet deposition of sulphate, nitrate and ammonium. Diagnostics and recent literature suggest that this bias may stem from insufficient cloud scavenging of aerosols and gases, and may be improved through the incorporation of multiphase hydrometeor scavenging within the modelling frameworks. The inability of North American models to predict the timing of the seasonal peak in wet ammonium ion deposition (observed maximum was in April, while all models predicted a June maximum) may also relate to the need for multiphase hydrometeor scavenging (absence of snow scavenging in all models employed here). High variability in the relative importance of particulate sulphate, nitrate and ammonium deposition fluxes between models was linked to the use of updated particle dry deposition parameterizations in some models. However, recent literature and further development of some of the models within the ensemble suggests these particulate biases may also be ameliorated via the incorporation of multiphase hydrometeor scavenging. Annual sulphur and nitrogen deposition prediction variability was linked to SO 2 and HNO 3 dry deposition parameterizations, and diagnostic analysis showed that the cuticle and soil deposition pathways dominate the deposition mass flux of these species. Further work improving parameterizations for these deposition pathways should reduce variability in model acidifying gas deposition estimates. The absence of base cation chemistry in some models was shown to be a major factor in positive biases in fine mode particulate ammonium and particle nitrate concentrations. Models employing ammonia bidirectional fluxes had both the largest and the smallest magnitude biases, depending on the model and bidirectional flux algorithm employed. A careful analysis of bidirectional flux models suggests that those with poor NH 3 performance may underestimate the extent of NH 3 emissions fluxes from forested areas. Based on these results, an increased process-research focus is therefore recommended for the following model processes and on observations which may assist in model evaluation and improvement: multiphase hydrometeor scavenging combined with updated particle dry deposition, cuticle and soil deposition pathway algorithms for acidifying gases, base cation chemistry and emissions, and NH 3 bidirectional fluxes. Comparisons with satellite observations suggest that oceanic NH 3 emissions sources should be included in regional chemical transport models. The choice of land use database employed within any given model was shown to significantly influence deposition totals in several instances, and employing a common land use database across chemical transport models and critical load calculations is recommended for future work.

critical loads↗
NASA NTRS2012

The Distribution of Snow Black Carbon observed in the Arctic and Compared to the GISS-PUCCINI Model

In this study, we evaluate the ability of the latest NASA GISS composition-climate model, GISS-E2- PUCCINI, to simulate the spatial distribution of snow BC (sBC) in the Arctic relative to present-day observations. Radiative forcing due to BC deposition onto Arctic snow and sea ice is also estimated. Two sets of model simulations are analyzed, where meteorology is linearly relaxed towards National Centers for Environmental Prediction (NCEP) and towards NASA Modern Era Reanalysis for Research and Applications (MERRA) reanalyses. Results indicate that the modeled concentrations of sBC are comparable with presentday observations in and around the Arctic Ocean, except for apparent underestimation at a few sites in the Russian Arctic. That said, the model has some biases in its simulated spatial distribution of BC deposition to the Arctic. The simulations from the two model runs are roughly equal, indicating that discrepancies between model and observations come from other sources. Underestimation of biomass burning emissions in Northern Eurasia may be the main cause of the low biases in the Russian Arctic. Comparisons of modeled aerosol BC (aBC) with long-term surface observations at Barrow, Alert, Zeppelin and Nord stations show significant underestimation in winter and spring concentrations in the Arctic (most significant in Alaska), although the simulated seasonality of aBC has been greatly improved relative to earlier model versions. This is consistent with simulated biases in vertical profiles of aBC, with underestimation in the lower and middle troposphere but overestimation in the upper troposphere and lower stratosphere, suggesting that the wet removal processes in the current model may be too weak or that vertical transport is too rapid, although the simulated BC lifetime seems reasonable. The combination of observations and modeling provides a comprehensive distribution of sBC over the Arctic. On the basis of this distribution, we estimate the decrease in snow and sea ice albedo and the resulting radiative forcing. We suggest that the albedo reduction due to BC deposition presents significant space-time variations, with highest mean reductions of 1.25% in the Russian Arctic, which are much larger than those in other Arctic regions (0.39% to 0.64 %). The averaged value over the Arctic north of 66degN is 0.4-0.6% during spring, leading to regional surface radiative forcings of 0.7, 1.1 and 1.0Wm(exp−2) in spring 2007, 2008 and 2009, respectively.

Dou, T.↗
NASA NTRS2018

Snow in the Changing Sea-Ice Systems

Snow is the most reflective, and also the most insulative, natural material on Earth. Consequently, it is an integral part of the sea-ice and climate systems. However, the spatial and temporal heterogeneities of snow pose challenges for observing, understanding and modelling those systems under anthropogenic warming. Here, we survey the snow-ice system, then provide recommendations for overcoming present challenges. These include: collecting process-oriented observations for model diagnostics and understanding snow-ice feedbacks, and improving our remote sensing capabilities of snow for monitoring large-scale changes in snow on sea ice. These efforts could be achieved through stronger coordination between the observational, remote sensing and modelling communities, and would pay dividends through distinct improvements in predictions of polar environments.

Snow↗
NASA NTRS1980

Microwave remote sensing of snowpacks

The interaction mechanisms responsible for the microwave backscattering and emission behavior of snow were investigated, and models were developed relating the backscattering coefficient (sigma) and apparent temperature (T) to the physical parameters of the snowpack. The microwave responses to snow wetness, snow water equivalent, snow surface roughness, and to diurnal variations were investigated. Snow wetness was shown to have an increasing effect with increasing frequency and angle of incidence for both active and passive cases. Increasing snow wetness was observed to decrease the magnitude sigma and increase T. Snow water equivalent was also observed to exhibit a significant influence sigma and T. Snow surface configuration (roughness) was observed to be significant only for wet snow surface conditions. Diurnal variations were as large as 15 dB for sigma at 35 GHz and 120 K for T at 37 GHz. Simple models for sigma and T of a snowpack scene were developed in terms of the most significant ground-truth parameters. The coefficients for these models were then evaluated; the fits to the sigma and T measurements were generally good. Finally, areas of needed additional observations were outlined and experiments were specified to further the understanding of the microwave-snowpack interaction mechanisms.

Stiles, W. H.↗
NASA NTRS1996

Subpixel Snow-Covered-Area and Snow Grain Size From Mixture Analysis with AVIRIS Data

Snow-covered-area (SCA) and snow grain size are crucial inputs to hydrologic and climatologic modeling of alpine and other seasonally snow-covered regions. SCA is necessary to parameterize energy budget calculations in climate models, to determine in which regions point snowmelt models are to be run for distributed snowmelt modeling efforts and to provide a basis from which estimates of snow water equivalent (SWE) may be made. Snow grain size, SWE and snow impurities determine the spectral albedo of snow, which controls the net solar flux at the snowpack surface. Snow albedo is of the utmost importance in snowmelt modeling, yet the difficulty with which grain size, SWE, and impurities are mapped has left the spatial distribution of snow albedo in alpine catchments poorly understood. The Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) has been used to estimate sub-pixel snow-covered-area and snow grain size independently. In this paper we present a technique which improves estimates of both snow parameters by treating their mapping simultaneously.

Green Robert O.↗
DOE OSTI2024

Science Area 1: Standard Award: Model-Data Fusion to Examine Multiscale Dynamical Controls on Snow Cover and Critical Zone Moisture Inputs (Final Report)

In many mountain watersheds of the world, seasonal snowpacks play an important role as natural reservoirs of water. Seasonal snowpacks accumulate water during cold, wet winter months that subsequently melts. Downstream communities depend on water from melting seasonal snowpacks to support agricultural, industrial, and municipal water needs. Rapidly melting snowpacks can also present a flooding hazard, particularly if snowpacks melt at rates faster than anticipated and where adequate reservoir capacity is unavailable to buffer river flows associated with melt. The spatial and temporal dynamics of snow accumulation and melt also play an important role in supporting upland ecosystems in mountain landscapes. Snowmelt provides soil moisture that enable terrestrial ecosystem productivity and exert control on soil microorganisms that play important roles in global carbon cycles. Climate warming is gradually decreasing the amount of precipitation in mountain watersheds arriving as snow, presenting potentially profound disruptions to mountain ecosystems, as well as downstream delivery of water. The overarching goal of this project was to understand how interactions between the near-surface atmosphere and surface topography control the input, accumulation, retention, and release of water from mountain snowpacks. Over a 5-year period, this project pursued an approach combining high-resolution regional climate modeling, satellite and airborne remote sensing data, and ground-based observations to develop and analyze benchmark datasets to address overarching science questions and hypotheses. Key products include a continuous, long-term, high spatiotemporal resolution (1 km/1 hr) dataset characterizing key climate variables in the Upper Colorado River Basin. The dataset included historical estimates of precipitation, temperature, humidity, solar and longwave radiation, and wind speeds. Additionally, the project developed a 20+ year long, 30 m spatial, daily temporal multi-sensor dataset characterizing snow presence/absence in the East/Taylor River watersheds in the Central Rocky Mountains of Colorado. The project supported training of 1 postdoctoral scholar, 1 Ph.D. student, and 1 M.S. student.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2008

A Physical Model to Estimate Snowfall over Land using AMSU-B Observations

In this study, we present an improved physical model to retrieve snowfall rate over land using brightness temperature observations from the National Oceanic and Atmospheric Administration's (NOAA) Advanced Microwave Sounder Unit-B (AMSU-B) at 89 GHz, 150 GHz, 183.3 +/- 1 GHz, 183.3 +/- 3 GHz, and 183.3 +/- 7 GHz. The retrieval model is applied to the New England blizzard of March 5, 2001 which deposited about 75 cm of snow over much of Vermont, New Hampshire, and northern New York. In this improved physical model, prior retrieval assumptions about snowflake shape, particle size distributions, environmental conditions, and optimization methodology have been updated. Here, single scattering parameters for snow particles are calculated with the Discrete-Dipole Approximation (DDA) method instead of assuming spherical shapes. Five different snow particle models (hexagonal columns, hexagonal plates, and three different kinds of aggregates) are considered. Snow particle size distributions are assumed to vary with air temperature and to follow aircraft measurements described by previous studies. Brightness temperatures at AMSU-B frequencies for the New England blizzard are calculated using these DDA calculated single scattering parameters and particle size distributions. The vertical profiles of pressure, temperature, relative humidity and hydrometeors are provided by MM5 model simulations. These profiles are treated as the a priori data base in the Bayesian retrieval algorithm. In algorithm applications to the blizzard data, calculated brightness temperatures associated with selected database profiles agree with AMSU-B observations to within about +/- 5 K at all five frequencies. Retrieved snowfall rates compare favorably with the near-concurrent National Weather Service (NWS) radar reflectivity measurements. The relationships between the NWS radar measured reflectivities Z(sub e) and retrieved snowfall rate R for a given snow particle model are derived by a histogram matching technique. All of these Z(sub e)-R relationships fall in the range of previously established Z(sub e)-R relationships for snowfall. This suggests that the current physical model developed in this study can reliably estimate the snowfall rate over land using the AMSU-B measured brightness temperatures.

Kim, Min-Jeong↗
DOE OSTI2022

Spatial patterns of snow distribution in the sub-Arctic

Abstract. The spatial distribution of snow plays a vital role in sub-Arctic and Arctic climate, hydrology, and ecology due to its fundamental influence on the water balance, thermal regimes, vegetation, and carbon flux. However, the spatial distribution of snow is not well understood, and therefore, it is not well modeled, which can lead to substantial uncertainties in snow cover representations. To capture key hydro-ecological controls on snow spatial distribution, we carried out intensive field studies over multiple years for two small (2017–2019; ∼ 2.5 km2) sub-Arctic study sites located on the Seward Peninsula of Alaska. Using an intensive suite of field observations (> 22 000 data points), we developed simple models of the spatial distribution of snow water equivalent (SWE) using factors such as topographic characteristics, vegetation characteristics based on greenness (normalized different vegetation index, NDVI), and a simple metric for approximating winds. The most successful model was random forest, using both study sites and all years, which was able to accurately capture the complexity and variability of snow characteristics across the sites. Approximately 86 % of the SWE distribution could be accounted for, on average, by the random forest model at the study sites. Factors that impacted year-to-year snow distribution included NDVI, elevation, and a metric to represent coarse microtopography (topographic position index, TPI), while slope, wind, and fine microtopography factors were less important. The characterization of the SWE spatial distribution patterns will be used to validate and improve snow distribution modeling in the Department of Energy's Earth system model and for improved understanding of hydrology, topography, and vegetation dynamics in the sub-Arctic and Arctic regions of the globe.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1989

Can Milankovitch orbital variations initiate the growth of ice sheets in a general circulation model?

The possibility of initiating the growth of ice sheets by solar insolation variations is examined. The study is conducted using a climate model with three different orbital configurations corresponding to 116,000 and 106,000 yr before the present and a modified insolation field with greater reductions in summer insolation at high northern latitudes. Despite the reduced summer and fall insolation, the model fails to maintain snow cover through the summer at locations of suspected ice sheet initiation. The results suggest that there is a discrepancy between the model's response to Milankovitch perturbations and the geophysical evidence of ice sheet initiation. If the model results are correct, the growth of ice shown by geophysical evidence would have occurred in an extremely ablative environment, demanding a complicated strategy.

Rind, D.↗
NASA NTRS2011

Influence of Dust and Black Carbon on the Snow Albedo in the NASA Goddard Earth Observing System Version 5 Land Surface Model

Present-day land surface models rarely account for the influence of both black carbon and dust in the snow on the snow albedo. Snow impurities increase the absorption of incoming shortwave radiation (particularly in the visible bands), whereby they have major consequences for the evolution of snowmelt and life cycles of snowpack. A new parameterization of these snow impurities was included in the catchment-based land surface model used in the National Aeronautics and Space Administration Goddard Earth Observing System version 5. Validation tests against in situ observed data were performed for the winter of 2003.2004 in Sapporo, Japan, for both the new snow albedo parameterization (which explicitly accounts for snow impurities) and the preexisting baseline albedo parameterization (which does not). Validation tests reveal that daily variations of snow depth and snow surface albedo are more realistically simulated with the new parameterization. Reasonable perturbations in the assigned snow impurity concentrations, as inferred from the observational data, produce significant changes in snowpack depth and radiative flux interactions. These findings illustrate the importance of parameterizing the influence of snow impurities on the snow surface albedo for proper simulation of the life cycle of snow cover.

Yasunari, Teppei J.↗
NASA NTRS1980

The albedo of snow for partially cloudy skies

The input parameters of the model are atmospheric precipitable water, ozone content, turbidity, cloud optical thickness, size and shape of ice crystal of snow and surface pressure. The model outputs spectral and integrated solar flux snow reflectance as a function of solar elevation and fractional cloudcover. The model is illustrated using representative parameters for the Antarctic coastal regions. The albedo for a clear sky depends inversely on the solar elevation. At high elevation the albedo depends primarily upon the grain size; at low elevation this dependence is on grain size and shape. The gradient of the albedo-elevation curve increases as the grains get larger and faceted. The albedo for a dense overcast is a few percent higher than the clear sky albedo at high elevations. A simple relation between the grain size and the overcast albedo is obtained. For a set of grain size and shape, the albedo matrices (the albedo as a function of solar elevation and fractional cloudcover) are tabulated.

Choudhury, B. J.↗