Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SiC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

SiC Substrate Composition Effect on TGO Scale Growth in EBC Systems During High‐Temperature Steam Exposure

A systematic investigation was conducted on the oxidation behavior of silicon-bond coats within environmental barrier coating (EBC) systems applied to Si-carbide (SiC) substrates, aiming to understand how different underlying SiC substrates influence the bond coat's thermally grown oxide (TGO) and its properties. The study examined (Y/Yb) 2 Si 2 O 7 /Si coatings on three cost-effective surrogate SiC substrates (chemical vapor deposition [CVD]-grown β-SiC, sintered α-SiC, and reaction-bonded [RB] SiC) for SiC fiber /SiC matrix ceramic matrix composites (CMCs). Discrepancies in TGO growth were observed, with noticeably higher growth rates reported for the coated CMC specimens than for the four monolithic SiC specimens. The CMC samples produce an amorphous TGO, whereas the other monolithic substrates formed a crystalline TGO, which lowered the oxygen permeability through the SiO 2 scale. In conclusion, the vitrification of the TGO in the (Y/Yb) 2 Si 2 O 7 /Si/CMC system resulted from the migration of boron species from the CMC substrate to the SiO 2 scale, leading to network modification via boron doping.

EBC↗

Microstructures and Mechanical Behavior of Ti{sub 3}SiC{sub 2}/Al{sub 2}O{sub 3}-Ni Composites Synthesized by Pulse Discharge Sintering

High-purity Ti{sub 3}SiC{sub 2} and Ti{sub 3}SiC{sub 2}/Al{sub 2}O{sub 3}-Ni composites with different Al{sub 2}O{sub 3}-Ni contents were fabricated using pulse discharge sintering (PDS) of a mechanical alloyed powder mixture. The synthesis process of monolithic Ti{sub 3}SiC{sub 2} was studied through displacement temperature–time (DTT) curve, displacement rate–time and displacement rate–temperature diagrams obtained during the PDS process. It was found that TiC{sub x} and Ti{sub 5}Si{sub 3}C{sub y} are the intermediate phases and the PDS process completed after 20 min at 1350 °C. The results showed that in Ti{sub 3}SiC{sub 2}/Al{sub 2}O{sub 3}-Ni composite, the Ni part of Al{sub 2}O{sub 3}-Ni leads to decomposition of Ti{sub 3}SiC{sub 2} to TiC{sub x}, Ti{sub 5}Si{sub 3}C{sub y} and Ni(Si){sub x}. No evidence was detected in the reaction between Al{sub 2}O{sub 3} and Ti{sub 3}SiC{sub 2}. The density and hardness of the composites are higher than monolithic Ti{sub 3}SiC{sub 2} due to the production of reinforcing phases. The composite showed lower flexural strength and higher compressive strength than monolithic Ti{sub 3}SiC{sub 2}.

36 MATERIALS SCIENCE↗

The Ablation and Oxidation Behaviors of SiC Coatings on Graphite Prepared by Slurry Sintering and Pack Cementation

SiC coatings were generated on graphite using slurry sintering (SS) and pack cementation (PC). The samples’ ablation features were assessed by an oxyacetylene torch. The rates of mass ablation of the PC–SiC and SS–SiC coatings were approximated 2.17 × 10{sup −3} and 9.52 × 10{sup −3} g s{sup −1}, respectively, decreased by 84.1 and 29.6% compared to the uncoated samples. It was mainly attributed to the formation of a SiO{sub 2} layer on the surface. The continuous SiO{sub 2} molten film formed via the PC–SiC oxidation generates a sealing mechanism which can be an obstacle against the oxygen diffusion and hinder more ablation. This is while discontinuous SiO{sub 2} film formed from the thin SS–SiC cannot protect the graphite effectively. The non-isothermal oxidation test shows that without the SiC coating, the sample weight is lost largely from 25 to 1500 °C, and its weight loss was 2.2% after the TGA. However, after coating, the samples possessed excellent oxidation protection and weight losses of SS–SiC and PC–SiC coatings are down to 1.3 and 0.6%, respectively. The more oxidation of the graphite substrate occurred due to the formation of macrocracks in the coating during the TGA and also the formation of holes on SiO{sub 2} glass layer owing to release of CO or CO{sub 2}.

36 MATERIALS SCIENCE↗

Dimensional isotropy of 6H and 3C SiC under neutron irradiation

This investigation experimentally determines the as-irradiated crystal axes dimensional change of the common polytypes of SiC considered for nuclear application. Single crystal α-SiC (6H), β-SiC (3C), CVD β-SiC, and single crystal Si have been neutron irradiated near 60 °C from 2 × 10 23 to 2 × 10 26 n/m 2 (E > 0.1 MeV), or about 0.02–20 dpa, in order to study the effect of irradiation on bulk swelling and strain along independent crystalline axes. Single crystal, powder diffractometry and density measurement have been carried out. For all neutron doses where the samples remained crystalline all SiC materials demonstrated equivalent swelling behavior. Moreover the 6H–SiC expanded isotropically. The magnitude of the swelling followed a ~0.77 power law against dose consistent with a microstructure evolution driven by single interstitial (carbon) mobility. Extraordinarily large ~7.8% volume expansion in SiC was observed prior to amorphization. Above ~0.9 × 10 25 n/m 2 (E > 0.1 MeV) all SiC materials became amorphous with an identical swelling: a 11.7% volume expansion, lowering the density to 2.84 g/cm 3 . As a result, the as-amorphized density was the same at the 2 × 10 25 and 2 × 10 26 n/m 2 (E > 0.1 MeV) dose levels.

36 MATERIALS SCIENCE↗

Review of SiC material development for nuclear fusion applications: Cross-cutting research and emerging opportunities

The SiC-based materials, particularly SiC-fiber-reinforced SiC matrix (SiC/SiC) composites, show strong potential for structural and functional applications in future fusion power plants because they can operate at high temperatures with a range of coolants and breeders, thereby enabling higher energy conversion efficiency. Here, this paper presents recent advancements in the development of SiC-based materials, focusing on processing techniques and material performance and resistance under fusion-relevant environments. The processing activities have emphasized near-net-shape fabrication and the joining of SiC subcomponents, with processing methods and material compositions informed by previous irradiation experiments on various grades of SiC. Research on irradiation effects has remained focused on degradation mechanisms and the microstructural optimization of SiC/SiC composites irradiated to high neutron damage levels. Analysis of irradiation defects in SiC has advanced via the application of cutting-edge characterization methods, among which Raman spectroscopy is becoming a common tool to assess atomic-scale chemical disorder. Fusion–fission crosscutting irradiation research has explored combined effects in SiC/SiC composites with application-relevant geometries, including bowing of SiC/SiC composite channels under neutron flux gradients, stress evolution in SiC/SiC composite tubes under through-thickness temperature gradients, and irradiation-enhanced corrosion in SiC. Finally, research opportunities for component testing and assessment under fusion-relevant conditions, in support of emerging concepts from the private fusion sector, are discussed.

Advanced manufacturing↗

Effect of heat treatment on microstructure and interface of SiC particle reinforced 2124 Al matrix composite

The microstructure and interface between metal matrix and ceramic reinforcement of a composite play an important role in improving its properties. In the present investigation, the interface and intermetallic compound present in the samples were characterized to understand structural stability at an elevated temperature. Aluminum based 2124 alloy with 10 wt.% silicon carbide (SiC) particle reinforced composite was prepared through vortex method and the solid ingot was deformed by hot rolling for better particle distribution. Heat treatment of the composite was carried out at 575 °C with varying holding time from 1 to 48 h followed by water quenching. In this study, the microstructure and interface of the SiC particle reinforced Al based composites have been studied using optical microscopy, scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectroscopy (EDS), electron probe micro-analyzer (EPMA) associated with wavelength dispersive spectroscopy (WDS) and transmission electron microscopy (TEM) to identify the precipitate and intermetallic phases that are formed during heat treatment. The SiC particles are uniformly distributed in the aluminum matrix. The microstructure analyses of Al–SiC composite after heat treatment reveal that a wide range of dispersed phases are formed at grain boundary and surrounding the SiC particles. The energy dispersive X-ray spectroscopy and wavelength dispersive spectroscopy analyses confirm that finely dispersed phases are CuAl{sub 2} and CuMgAl{sub 2} intermetallic and large spherical phases are Fe{sub 2}SiAl{sub 8} or Al{sub 15}(Fe,Mn){sub 3}Si. It is also observed that a continuous layer enriched with Cu and Mg of thickness 50–80 nm is formed at the interface in between Al and SiC particles. EDS analysis also confirms that Cu and Mg are segregated at the interface of the composite while no carbide is identified at the interface. - Highlights: • The composite was successfully heat treated at 575°C for 1-48 hrs. • A layer of 50-75 nm is formed at interface after heat treatment. • No Carbide formation and SiC dissolution is observed at this temperature. • MgAl{sub 2}O{sub 4}, CuMgAl{sub 2} phases are segregated at interface of Al-SiC composite. • Mg and Cu are also segregated at near to the grain boundary.

36 MATERIALS SCIENCE↗

EBSD characterization of the growth mechanism of SiC synthesized via direct microwave heating

Well-crystallized 3C-silicon carbide (SiC) grains/nanowires have been synthesized rapidly and conveniently via direct microwave heating, simply using silicon dioxide powders and artificial graphite as raw materials. The comprehensive characterizations have been employed to investigate the micro-structure of the obtained 3C-SiC products. Results indicated that, different from the classic screw dislocation growth mechanism, the 3C-SiC grains/nanowires synthesized via high-energy vacuum microwave irradiation were achieved through the two-dimension nucleation and laminar growth mechanism. Especially, the electron backscattered diffraction (EBSD) was employed to characterize the crystal planes of the as-grown SiC products. The calculated Euler angles suggested that the fastest-growing crystal planes (211) were overlapped gradually. Through the formation of the (421) transformation plane, (211) finally evolved to (220) which existed as the side face of SiC grains. The most stable crystal planes (111) became the regular hexagonal planes in the end, which could be explained by the Bravais rule. The characterization results of EBSD provided important experimental information for the evolution of crystal planes. - Graphical abstract: The formation of 3C-SiC prepared via direct microwave heating follows the mechanism of two-dimension nucleation and laminar growth. - Highlights: • 3C−SiC grains/nanowires were obtained via direct microwave heating. • 3C−SiC followed the mechanism of two-dimension nucleation and laminar growth. • In-situ EBSD analysis provided the experimental evidences of the growth.

36 MATERIALS SCIENCE↗

Influence of quenching agent on microstructure, properties and thermal stress of SiC{sub p}/2009 composites

15% vol. SiC{sub p}/2009 composites prepared by powder metallurgy were quenched in room temperature water and 20% polyethylene glycol (PEG) solution respectively, then aged naturally. The influence of quenching agent on microstructure, properties and thermal stress of SiC{sub p}/2009 composites were investigated by means of scanning/transmission electron microscope, hardness and tensile test. The results showed that the number of precipitated phase in water quenched composites increased, with much finer in size and more homogeneous in distribution compared with 20% PEG quenched one. Meanwhile, the density of dislocation in composites by water quenching was also much higher. Intergranular corrosion did not occur with the two quenching agents. The 20% PEG quenched composites exhibited slight lower hardness and higher electrical conductivity than that of water quenched one. The two quenched composites showed same level in tensile strength, but the yield strength of water-quenched composites was higher (8 MPa, 3%). The usage of 20% PEG reduced thermal stress and minimized warping deformation of the parts, it is a more suitable quenching agent for SiC{sub p}/2009 composites in engineering application fields. - Highlights: •SiC{sub p}/2009 composites quenched by water and 20% PEG solution were investigated. •Aging precipitation behavior of SiC{sub p}/2009 composites is sensitive to quenchant. •Influence of quenching agent on properties of SiC{sub p}/2009 composites are minimal. •Quenching with 20% PEG reduces thermal stress of SiC{sub p}/2009 composites remarkably. •20% PEG is a more suitable quenching agent for SiC{sub p}/2009 composites than water.

36 MATERIALS SCIENCE↗

X-ray micro computed tomography characterization of cellular SiC foams for their applications in chemical engineering

Open-cell SiC foams clearly are promising materials for continuous-flow chemical applications such as heterogeneous catalysis and distillation. X-ray micro computed tomography characterization of cellular β-SiC foams at a spatial voxel size of 13.6{sup 3} μm{sup 3} and the interpretation of morphological properties of SiC open-cell foams with implications to their transport properties are presented. Static liquid hold-up in SiC foams was investigated through in-situ draining experiments for the first time using the μ-CT technique providing thorough 3D information about the amount and distribution of liquid hold-up inside the foam. This will enable better modeling and design of structured reactors based on SiC foams in the future. In order to see more practical uses, μ-CT data of cellular foams must be exploited to optimize the design of the morphology of foams for a specific application. - Highlights: •Characterization of SiC foams using novel X-ray micro computed tomography. •Interpretation of structural properties of SiC foams regarding to their transport properties. •Static liquid hold-up analysis of SiC foams through in-situ draining experiments.

36 MATERIALS SCIENCE↗

Micro-structural evolution during diffusion bonding of C-SiC/C-SiC composite using Ti interlayer

Highlights: • Formation of Ti{sub 3}SiC{sub 2} MAX phase in the joint of C-SiC composite • EBSD revealed three zone microstructure of the joint • Formation of a thin continuous layer of TiSi{sub 2} • The apparent shear strength of 19 MPa - Abstract: Diffusion bonding of C-SiC composite was achieved with Ti interlayer at 1500 °C for 3 h with the applied pressure of 20 MPa. The joined C-SiC composite showed the apparent shear strength of 19 MPa and the sample fractured away from the joint. The microstructure of joint consists of Ti{sub 3}SiC{sub 2} MAX phase, TiSi{sub 2} and TiC in which Ti{sub 3}SiC{sub 2} was the major phase. The distribution of phases in the microstructure of joint was categorized into three different zones based on electron backscattered diffraction (EBSD) results. The first zone consists of a thin continuous TiSi{sub 2} phase, which was followed by a thick zone of Ti{sub 3}SiC{sub 2} MAX phase. In the middle of the sample, a mix phase zone was found. The reaction mechanism was established for the evolution above microstructure of joined C-SiC composite.

36 MATERIALS SCIENCE↗

Electrodeposited composite coating of Ni-W-P with nano-sized rod- and spherical-shaped SiC particles

In this research, Ni-W-P-SiC nanocomposite coatings are electrodeposited from the plating solution containing suspension of nano-sized spherical- and rod-shaped SiC particles. The influence of SiC particle charge, applied current density, surfactant addition and the particle shape on the SiC incorporation rate has been studied. The phase structure, microhardness and wear resistance of Ni-W-P-SiC nanocomposite coatings were evaluated using X-ray diffraction (XRD), microhardness tester and wear test apparatus. The surface morphology of the produced coatings and worn surfaces has been investigated using scanning electron microscope (SEM). Additionally, the composite coating exhibited higher hardness and wear resistance than the pure Ni-W-P alloy. Regardless the particle shape, the mechanical characteristics of composite coatings are improved with increasing of SiC wt.% into the matrix. The corrosion behavior of the produced coatings was studied using anodic polarization measurements. The nanocomposite coating incorporating SiC rods exhibited higher mechanical and corrosion performance compared with deposits with spherical SiC nano-particles.

36 MATERIALS SCIENCE↗

SiC-dopped MCM-41 materials with enhanced thermal and hydrothermal stabilities

Graphical abstract: Novel SiC-dopped MCM-41 materials were synthesized by adding silicon carbide suspension in the molecular sieve precursor solvent followed by in situ hydrothermal synthesis. The dopped materials have a wormhole-like mesoporous structure and exhibit enhanced thermal and hydrothermal stabilities. Highlights: {yields} SiC-dopped MCM-41 was synthesized by in situ hydrothermal synthesis of molecular sieve precursor combined with SiC. {yields} The dopped MCM-41 materials show a wormhole-like mesoporous structure. {yields} The thermal stability of the dopped materials have an increment of almost 100 {sup o}C compared with the pure MCM-41. {yields} The hydrothermal stability of the dopped materials is also better than that of the pure MCM-41. -- Abstract: SiC-dopped MCM-41 mesoporous materials were synthesized by the in situ hydrothermal synthesis, in which a small amount of SiC was added in the precursor solvent of molecular sieve before the hydrothermal treatment. The materials were characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, N{sub 2} physical adsorption and thermogravimetric analysis, respectively. The results show that the thermal and hydrothermal stabilities of MCM-41 materials can be improved obviously by incorporating a small amount of SiC. The structure collapse temperature of SiC-dopped MCM-41 materials is 100 {sup o}C higher than that of pure MCM-41 according to the differential scanning calorimetry analysis. Hydrothermal treatment experiments also show that the pure MCM-41 will losses it's ordered mesoporous structure in boiling water for 24 h while the SiC-dopped MCM-41 materials still keep partial porous structure.

36 MATERIALS SCIENCE↗

Porous SiC nanowire arrays as stable photocatalyst for water splitting under UV irradiation

Highlights: Black-Right-Pointing-Pointer Arrays of porous SiC nanowires prepared by a facile in situ carbonizing method. Black-Right-Pointing-Pointer Utilizing the SiC nanowire arrays as photocatalysis for water splitting. Black-Right-Pointing-Pointer Excellent photocatalytic performance under the UV irradiation. Black-Right-Pointing-Pointer Very high stability of the SiC nanowire photocatalyst. -- Abstract: In this study, we report the fabrication and photocatalytic properties of the oriented arrays of SiC nanowires on the Si substrate. The SiC nanowire arrays were prepared by carbonizing the Si nanowire arrays with the graphite powder at 1250 Degree-Sign C. The as-prepared SiC nanowires are highly porous, which endows them with a high surface-to-volume ratio. Considering the large surface areas and the high stability, the porous SiC nanowire arrays were used as photocatalyst for water splitting under UV irradiation. It was found that such porous SiC structure exhibited an enhanced and extremely stable photocatalytic performance.

36 MATERIALS SCIENCE↗

Synchronistic preparation of fibre-like SiC and cubic-ZrO{sub 2}/SiC composite from zircon via carbothermal reduction process

Graphical abstract: Display Omitted Highlights: ► Zircon carbothermal reduction was carried out in a tailor-made device at high-temperature air atmosphere. ► Fibre-like SiC and cubic-ZrO{sub 2}/SiC composite were obtained synchronically. ► Zirconium and silicon in zircon ore was initial separated. ► [SiO{sub 4}] was mutated to fibre-like SiC, while [ZrO{sub 8}] was transformed to cubic ZrO{sub 2}. ► The SiC were surprisingly enriched in the reducing atmosphere charred coal particles layers by gas–solid reaction. -- Abstract: Fibre-like SiC and cubic-ZrO{sub 2}/SiC composite were prepared respectively from zircon with yttrium oxide addition via carbothermal reduction process at 1600 °C for 4 h in an air atmosphere furnace, where the green samples were immerged in charred coal particles inside a high-temperature enclosed corundum crucible. The reaction products were characterized by XRD, XRF, XPS and SEM. The results indicate that ZrO{sub 2} in the products was mainly existed in the form of cubic phase. The reacted samples mainly contain cubic ZrO{sub 2}, β-SiC and trace amounts of zircon, with the SiC accounting for 14.8 wt%. Furthermore, a large quantity of fibre-like SiC was surprisingly found to concentrate in the charred coal particles layers around the samples. This study obtains fibre-like SiC and cubic-ZrO{sub 2}/SiC composite synchronically from zircon via carbothermal reduction process, which also bring a value-added high-performance application for natural zircon.

36 MATERIALS SCIENCE↗

Optical spectra of the silicon-terminated carbon chain radicals SiC{sub n}H (n = 3,4,5)

The gas-phase optical spectra of three silicon-terminated carbon chain radicals, SiC{sub n}H (n = 3 − 5), formed in a jet-cooled discharge of silane and acetylene, have been investigated by resonant two-color two-photon ionization and laser-induced fluorescence/dispersed fluorescence. Analysis of the spectra was facilitated by calculations performed using equation-of-motion coupled cluster methods. For SiC{sub 3}H and SiC{sub 5}H, the observed transitions are well-described as excitations from a {sup 2}Π ground state to a {sup 2}Σ state, in which vibronic coupling, likely involving a higher-lying Π state with a very large predicted f-value (close to unity), is persistent. The lowest {sup 2}Σ states of both species are characterized by a rare silicon triple bond, which was identified previously [T. C. Smith, H. Y. Li, D. J. Clouthier, C. T. Kingston, and A. J. Merer, J. Chem. Phys. 112, 3662 (2000)] in the lowest {sup 2}Σ state of SiCH. Although a strong Π − Π transition is predicted for SiC{sub 4}H, the observed spectrum near 505 nm more likely corresponds to excitation to a relatively dark Σ state which is vibronically coupled to a nearby Π state. In contrast to the chains with an odd number of carbon atoms, which exhibit relatively sharp spectral features and lifetimes in the 10–100 ns range, SiC{sub 4}H shows intrinsically broadened spectral features consistent with a ∼100 fs lifetime, and a subsequent long-lived decay (>50 μs) which we ascribe to mixing with a nearby quartet state arising from the same electronic configuration. The spin-orbit coupling constants for both SiC{sub 3}H and SiC{sub 5}H radicals were determined to be approximately 64 cm{sup −1}, similar to that of SiCH (69.8 cm{sup −1}), suggesting that the unpaired electron in these species is localized on the silicon atom. Motivated by the new optical work, the rotational spectrum of linear SiC{sub 3}H was detected by cavity Fourier-transform microwave spectroscopy in the 13–34 GHz range. Each rotational transition from the {sup 2}Π{sub 3/2} ground state exhibits well-resolved Λ-doubling and hyperfine structure; the derived rotational constant of B = 2.605 GHz is in excellent agreement with our calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interface-structure of the Si/SiC heterojunction grown on 6H-SiC

The Si/SiC heterojunctions were prepared on 6H-SiC (0001) C-face by low-pressure chemical vapour deposition at 850 ∼ 1050 °C. Transmission electron microscopy and selected area electron diffraction were employed to investigate the interface-structure of Si/SiC heterojunctions. The Si/6H-SiC heterostructure of large lattice-mismatch follows domain matching epitaxy mode, which releases most of the lattice-mismatch strain, and the coherent Si epilayers can be grown on 6H-SiC. Si(1-11)/6H-SiC(0001) heterostructure is obtained at 900 °C, and the in-plane orientation relationship of Si/6H-SiC heterostructure is (1–11)[1-1-2]{sub Si}//(0001)[-2110]{sub 6H-SiC}. The Si(1-11)/6H-SiC(0001) interface has the same 4:5 Si-to-SiC matching mode with a residual lattice-mismatch of 0.26% along both the Si[1-1-2] and Si[110] orientations. When the growth temperature increases up to 1000 °C, the 〈220〉 preferential orientation of the Si film appears. SAED patterns at the Si/6H-SiC interface show that the in-plane orientation relationship is (-220)[001]{sub Si}//(0001)[2-1-10]{sub 6H-SiC}. Along Si[110] orientation, the Si-to-SiC matching mode is still 4:5; along the vertical orientation Si[001], the Si-to-SiC mode change to approximate 1:2 and the residual mismatch is 1.84% correspondingly. The number of the atoms in one matching-period decreases with increasing residual lattice-mismatch in domain matching epitaxy and vice versa. The Si film grows epitaxially but with misfit dislocations at the interface between the Si film and the 6H-SiC substrate. And the misfit dislocation density of the Si(1-11)/6H-SiC(0001) and Si(-220)/6H-SiC(0001) obtained by experimental observations is as low as 0.487 × 10{sup 14 }cm{sup −2} and 1.217 × 10{sup 14 }cm{sup −2}, respectively, which is much smaller than the theoretical calculation results.

36 MATERIALS SCIENCE↗

TUNGSTEN ISOTOPIC COMPOSITIONS IN STARDUST SiC GRAINS FROM THE MURCHISON METEORITE: CONSTRAINTS ON THE s-PROCESS IN THE Hf-Ta-W-Re-Os REGION

We report the first tungsten isotopic measurements in stardust silicon carbide (SiC) grains recovered from the Murchison carbonaceous chondrite. The isotopes {sup 182,183,184,186}W and {sup 179,180}Hf were measured on both an aggregate (KJB fraction) and single stardust SiC grains (LS+LU fraction) believed to have condensed in the outflows of low-mass carbon-rich asymptotic giant branch (AGB) stars with close-to-solar metallicity. The SiC aggregate shows small deviations from terrestrial (= solar) composition in the {sup 182}W/{sup 184}W and {sup 183}W/{sup 184}W ratios, with deficits in {sup 182}W and {sup 183}W with respect to {sup 184}W. The {sup 186}W/{sup 184}W ratio, however, shows no apparent deviation from the solar value. Tungsten isotopic measurements in single mainstream stardust SiC grains revealed lower than solar {sup 182}W/{sup 184}W, {sup 183}W/{sup 184}W, and {sup 186}W/{sup 184}W ratios. We have compared the SiC data with theoretical predictions of the evolution of W isotopic ratios in the envelopes of AGB stars. These ratios are affected by the slow neutron-capture process and match the SiC data regarding their {sup 182}W/{sup 184}W, {sup 183}W/{sup 184}W, and {sup 179}Hf/{sup 180}Hf isotopic compositions, although a small adjustment in the s-process production of {sup 183}W is needed in order to have a better agreement between the SiC data and model predictions. The models cannot explain the {sup 186}W/{sup 184}W ratios observed in the SiC grains, even when the current {sup 185}W neutron-capture cross section is increased by a factor of two. Further study is required to better assess how model uncertainties (e.g., the formation of the {sup 13}C neutron source, the mass-loss law, the modeling of the third dredge-up, and the efficiency of the {sup 22}Ne neutron source) may affect current s-process predictions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Smoothing single-crystalline SiC surfaces by reactive ion etching using pure NF{sub 3} and NF{sub 3}/Ar mixture gas plasmas

In pure NF{sub 3} plasma, the etching rates of four kinds of single-crystalline SiC wafer etched at NF{sub 3} pressure of 2 Pa were the highest and it decreased with an increase in NF{sub 3} pressure. On the other hand, they increased with an increase in radio frequency (RF) power and were the highest at RF power of 200 W. A smooth surface was obtained on the single-crystalline 4H-SiC after reactive ion etching at NF{sub 3}/Ar gas pressure of 2 Pa and addition of Ar to NF{sub 3} plasma increased the smoothness of SiC surface. Scanning electron microscopy observation revealed that the number of pillars decreased with an increase in the Ar-concentration in the NF{sub 3}/Ar mixture gas. The roughness factor (R{sub a}) values were decreased from 51.5 nm to 25.5 nm for the As-cut SiC, from 0.25 nm to 0.20 nm for the Epi-SiC, from 5.0 nm to 0.7 nm for the Si-face mirror-polished SiC, and from 0.20 nm to 0.16 nm for the C-face mirror-polished SiC by adding 60% Ar to the NF{sub 3} gas. Both the R{sub a} values of the Epi- and the C-face mirror-polished wafer surfaces etched using the NF{sub 3}/Ar (40:60) plasma were similar to that treated with mirror polishing, so-called the Catalyst-Referred Etching (CARE) method, with which the lowest roughness of surface was obtained among the chemical mirror polishing methods. Etching duration for smoothing the single-crystalline SiC surface using its treatment was one third of that with the CARE method.

36 MATERIALS SCIENCE↗