Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Scarce data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Improved VAS regression soundings of mesoscale temperature structure observed during the 1982 atmospheric variability experiment

An Atmospheric Variability Experiment (AVE) was conducted over the central U.S. in the spring of 1982, collecting radiosonde date to verify mesoscale soundings from the VISSR Atmospheric Sounder (VAS) on the GOES satellite. Previously published VAS/AVE comparisons for the 6 March 1982 case found that the satellite retrievals scarcely detected a low level temperature inversion or a mid-tropospheric cold pool over a special mesoscale radiosonde verification network in north central Texas. The previously published regression and physical retrieval algorithms did not fully utilize VAS' sensitivity to important subsynoptic thermal features. Therefore, the 6 March 1982 case was reprocessed adding two enhancements to the VAS regression retrieval algorithm: (1) the regression matrix was determined using AVE profile data obtained in the region at asynoptic times, and (2) more optimistic signal-to-noise statistical conditioning factors were applied to the VAS temperature sounding channels. The new VAS soundings resolve more of the low level temperature inversion and mid-level cold pool. Most of the improvements stems from the utilization of asynoptic radiosonde observations at NWS sites. This case suggests that VAS regression soundings may require a ground-based asynoptic profiler network to bridge the gap between the synoptic radiosonde network and the high resolution geosynchronous satellite observations during the day.

Chesters, Dennis↗
DOE OSTI2021

Parameterization of arctic hydrometeor physics using new precipitation measurement technologies: Final Report

Predictions of precipitation are highly sensitive to the accuracy of parameterized growth and sedimentation processes, especially in remote regions such as the Arctic where observations are scarce. The goal of this study was to combine measurements of meteorological conditions and retrievals from passive and active remote sensors to provide refined parameterizations of precipitation properties and processes with a particular focus on the Arctic. To accomplish the project goals, new instrumentation was used from the Oliktok Point Mobile Facility and the Utqiagvik (Barrow) North Slope of Alaska ARM site focusing in particular on Multi-Angle Snowflake Camera (MASC) data. The MASC is the first device able to automatically photograph precipitation particles in free-fall from multiple angles while simultaneously measuring their fall speed. The MASC installed at the ARM Oliktok Point and Utqiagvik facilities was used to examine the nature of Arctic precipitation, taking particular advantage of the unique suite of precipitation, meteorological, and remote sensing instrumentation that is available at the high latitude sites. Combined with radiometer data we were able to explore the relationship between precipitation particle characteristics and the clouds where the snow is created. Ground-based wind measurements provided detailed data on turbulence. Further theoretical work explored the physical mechanisms controlling precipitation size distributions, the physics determining hydrometeor fallspeed, and the existence of general solutions to the Navier-Stokes equations for falling particles. Outreach work introduced hydrometeor classification to classrooms across the United States.

47 OTHER INSTRUMENTATION↗
NASA NTRS2010

On the Scaling of Small, Heat Simulated Jet Noise Measurements to Moderate Size Exhaust Jets

Modern military aircraft jet engines are designed with variable geometry nozzles to provide optimum thrust in different operating conditions, depending on the flight envelope. However, the acoustic measurements for such nozzles are scarce, due to the cost involved in making full scale measurements and the lack of details about the exact geometry of these nozzles. Thus the present effort at The Pennsylvania State University and the NASA Glenn Research Center- in partnership with GE Aviation is aiming to study and characterize the acoustic field produced by supersonic jets issuing from converging-diverging military style nozzles. An equally important objective is to validate methodology for using data obtained from small and moderate scale experiments to reliably predict the most important components of full scale engine noise. The experimental results presented show reasonable agreement between small scale and moderate scale jet acoustic data, as well as between heated jets and heat-simulated ones. Unresolved issues however are identified that are currently receiving our attention, in particular the effect of the small bypass ratio airflow. Future activities will identify and test promising noise reduction techniques in an effort to predict how well such concepts will work with full scale engines in flight conditions.

McLaughlin, Dennis K.↗
NASA NTRS1993

Galaxies with spectral energy distributions peaking near 60 micrometers. 1: Optical spectroscopy, infrared photometry, and radio continuum data

We present and discuss broadband infrared photometry in the 1-100 micrometer wavelength range, optical spectroscopy, and radio continuum observations of a sample of IRAS galaxies with unusual spectral energy distributions that peak near 60 micrometers. For inclusion in this sample of '60 PKs', the galaxies must have satisfied the following criteria: IRAS flux ratios f(sub 60)/f(sub 100) greater than 1 and 1 less than f(sub 60)/f(sub 25) less than 4, and galactic latitude absolute value of b greater than 10 deg. In this paper, which is the first of a series, we show that the 60PKs are relatively scarce objects that represent about 2% of the spatial density of 60 micrometer-selected galaxies in the range L(60 micrometers) = 10(exp 9) to 10(exp 12) solar luminosity, but have a far-infrared luminosity function of nearly identical shape. They are detected up to redshifts of 0.2. Besides having the usual high percentage of active galaxies (approximately 30% H II-region like, 50% Seyfert 2, 10% Seyfert 1, 10% unknown) associated with a flat 25 to 60 micrometer spectral index, the sample also includes most of the galaxies that have been found to have a dust-obscured broadline region. We show that the additional f(sub 60)/f(sub 100) greater than 1 constraint selects galaxies with dust that is more centrally concentrated and exposed to a more intense radiation field than in most other IRAS galaxies. In particular, the cirrus component of the far-infrared radiation, which is typically the dominant contributor to the 100 micrometer emission from spiral galaxies, is negligible or missing. This is consistent with the fact that the most distinctive optical signature of 60PKs is the absence of spiral structure: they tend to be peculiar and/or amorphous objects.

Vader, J Patricia↗
NASA NTRS2019

Global Assimilation of Loon Stratospheric Balloon Observations

Accurate analyses of stratospheric winds are important for determining realistic constituent transport and providing improved diagnostic studies and forecasts of the stratosphere. This study examines impacts on global meteorological analyses resulting from using winds derived from Loon superpressure balloons in the lower stratosphere (hereafter Loon winds) as additional input observations to the Goddard Earth Observing System (GEOS) data assimilation system. To fully investigate the impacts of assimilating the Loon winds, two steps are taken: (1) comparison of the GEOS analysis winds with Loon winds (Control experiment) and (2) examination of the impacts of assimilating the Loon winds into the GEOS data assimilation system (Loon experiment). The time period selected is June–August 2014 when over 150 Loon balloons were launched, mainly in the Southern Hemisphere. In the middle latitudes, the Loon winds and Control winds agree well (Loon balloon zonal wind observation minus forecast, O − F, root‐mean‐square (RMS) values of ~2.75 m/s) and assimilating the Loon winds has a small impact (O − F RMS values unchanged). In the tropics, the Loon observations and Control analysis winds differ more than in middle latitudes (zonal wind O − F RMS ~3.75 m/s) and assimilating the Loon winds improves the zonal wind O − F RMS by ~1 m/s. In selected cases where the Loon observations and Control analysis differ greatly (O − F RMS values greater than 10 m/s), assimilating Loon winds significantly decreases the zonal wind O − F RMS by 5 m/s. These decreases in O − F RMS values show that the 6‐hr forecasts are improved at the Loon balloon observation locations. While satellites routinely measure Earth's global temperatures from space, in situ wind measurements are relatively scarce, consisting mainly of a network of ground‐based weather balloons. Since only a limited number of the weather balloons even reach stratospheric altitudes, there is a need for additional stratospheric observations. One option for addition wind information is the use of experimental superpressure balloons (SPBs). SPBs can remain in the stratosphere for many months traveling with the winds and hence, by reporting their changing positions, providing in situ wind observations. These SPBs experiments are generally limited in terms of time period and number of balloons. However, over the past few years Loon has been launching hundreds of SPBs (hereafter called Loon balloons) providing a more consistent set of observations of wind in the stratosphere. Here we assimilate some of the Loon balloon winds into the NASA GEOS global data assimilation system. The data assimilation system combines all observations with an atmospheric model to produce global analysis of winds and temperatures. Results show that including the Loon balloon wind information noticeably affects the global analysis as well as forecasts with the largest impact in the tropics. These results provide direction to future model and analysis improvements.

L. Coy↗
DOE OSTI2025

Tracing the impacts of Mount Pinatubo eruption on regional climate using spatially-varying changepoint detection

Significant events, such as volcanic eruptions, can have global and long-lasting impacts on climate. These global impacts, however, are not uniform across space and time. Understanding how the Mt. Pinatubo eruption affects global and regional climate is of great interest for predicting the impact on climate due to similar events as well as understanding the possible effect of the stratospheric aerosol injections proposed to combat climate change. While many studies illustrated the impact of the Pinatubo eruption on a global scale, studies at a fine regional scale are scarce. Here, we propose a Bayesian spatially-varying changepoint detection and estimation method to trace the impact of Mt. Pinatubo eruption on regional climate. Our approach takes into account the diffusing nature and spatial correlation of the climate changes attributed to the volcanic eruption. We illustrate our method and demonstrate its advantages over an existing changepoint detection method through simulations. Finally, we apply our method to monthly stratospheric aerosol optical depth and surface temperature data from 1985 to 1995 to detect and estimate changepoints following the 1991 Mt. Pinatubo eruption. Our results quantitatively characterize the spatial pattern of the eruption’s impact on regional climate, complementing the previous studies on the global impact of the Pinatubo eruption.

Aerosol optical depth↗
NASA NTRS1979

Wildlife monitoring program plan

A plan for integrating the various requirements for wildlife monitoring with modern aerospace technology is presented. This plan is responsive to user needs, recognizes legal requirements, and is based on an evolutionary growth from domestic animals and larger animals to smaller, more scarce and remote species. The basis for animal study selection was made from the 1973 Santa Cruz Summer Study on Wildlife Monitoring. As techniques are developed the monitoring and management tasks will be interfaced with and eventually operated by the user agencies. Field efforts, aircraft and satellites, will be supplemented by laboratory investigations. Sixty percent of the effort will be in hardware research and development (satellite technology, microminiaturization) and the rest for gathering and interpreting data.

Sebesta, P.↗
DOE OSTI2021

Shrinkage-induced deformations and creep of structural concrete: 1-year measurements and numerical prediction

Highlights: • Extensive experimental study on drying shrinkage, creep and microcracking of concrete • All specimens prepared from a single batch of ordinary-strength structural concrete • 1st year of measurements of (not only) non-uniformly drying beams with span up to 3-m • The database is downloadable from free-to-use research data repository • Modified MPS model for concrete creep used in blind prediction of all experiments The material models for creep and shrinkage operating on the material point level in FEM are usually intended for challenging complex applications and structures, where the average cross-sectional approach does not suffice. The identification of the growing number of material parameters induced by increasing model capabilities relies on very specific and narrow-oriented yet interconnected experiments which are scarce. The presented comprehensive experiments aim to provide a clearer image of the complicated interaction among the basic phenomena: drying, shrinkage, creep, and microcracking. The cornerstone of this ongoing research is a unique set of 30 partially-sealed unreinforced concrete beams with span 1.75–3.0 m subjected to drying. To minimize material variation, all specimens in this study were cast from a single batch of ordinary strength structural concrete with slag-blended binder. The resulting experimental database will be suitable both for validation and development of the constitutive models.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Matrix Completion for Improved Observability in Low-Voltage Distribution Grids

This paper considers the problem of recovering missing entries in a partially observed matrix from relatively few measurements (i.e., the so-called matrix completion problem) with the aim of increasing the presently limited observability of low-voltage distribution grids. To this end, the partially observed matrix is formed using scarce voltage magnitude measurements while accounting for their spatial information. Voltage readings are assumed to be collected from distribution utility sensors and/or geographically-distributed cable television network sensors located in immediate proximity to distribution grid nodes. A matrix completion approach built on the parameter-less singular value shrinkage technique is used to estimate voltage magnitudes at otherwise non-observable low-voltage nodes using a small number of single- or multiple-snapshot data. The effectiveness of the proposed approach is demonstrated using a U.S.-style distribution test system from the synthetic SMART- DS data set under very low- to moderate-observability conditions.

low-rank matrix completion↗
DOE OSTI2022

Adaptive responses of marine diatoms to zinc scarcity and ecological implications

Scarce dissolved surface ocean concentrations of the essential algal micronutrient zinc suggest that Zn may influence the growth of phytoplankton such as diatoms, which are major contributors to marine primary productivity. However, the specific mechanisms by which diatoms acclimate to Zn deficiency are poorly understood. Using global proteomic analysis, we identified two proteins (ZCRP-A/B, Zn/Co Responsive Protein A/B) among four diatom species that became abundant under Zn/Co limitation. Characterization using reverse genetic techniques and homology data suggests putative Zn/Co chaperone and membrane-bound transport complex component roles for ZCRP-A (a COG0523 domain protein) and ZCRP-B, respectively. Metaproteomic detection of ZCRPs along a Pacific Ocean transect revealed increased abundances at the surface (<200 m) where dZn and dCo were scarcest, implying Zn nutritional stress in marine algae is more prevalent than previously recognized. These results demonstrate multiple adaptive responses to Zn scarcity in marine diatoms that are deployed in low Zn regions of the Pacific Ocean.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Detection of open cluster rotation fields from Gaia EDR3 proper motions

Context: Most stars from in groups which with time disperse, building the field population of their host galaxy. In the Milky Way, open clusters have been continuously forming in the disk up to the present time, providing it with stars spanning a broad range of ages and masses. Observations of the details of cluster dissolution are, however, scarce. One of the main difficulties is obtaining a detailed characterisation of the internal cluster kinematics, which requires very high-quality proper motions. For open clusters, which are typically loose groups with tens to hundreds of members, there is the additional difficulty of inferring kinematic structures from sparse and irregular distributions of stars. Aims: Here, we aim to analyse internal stellar kinematics of open clusters, and identify rotation, expansion, or contraction patterns. Methods: We use Gaia Early Data Release 3 (EDR3) astrometry and integrated nested Laplace approximations to perform vector-field inference and create spatio-kinematic maps of 1237 open clusters. The sample is composed of clusters for which individual stellar memberships were already known, thus minimising contamination from field stars in the velocity maps. Projection effects were corrected using EDR3 data complemented with radial velocities from Gaia Data Release 2 and other surveys. Results: We report the detection of rotation patterns in eight open clusters. Nine additional clusters display possible rotation signs. We also observe 14 expanding clusters, with 15 other objects showing possible expansion patterns. Contraction is evident in two clusters, with one additional cluster presenting a more uncertain detection. In total, 53 clusters are found to display kinematic structures. Within these, elongated spatial distributions suggesting tidal tails are found in five clusters. These results indicate that the approach developed here can recover kinematic patterns from noisy vector fields, as those from astrometric measurements of open clusters or other stellar or galactic populations, thus offering a powerful probe for exploring the internal kinematics and dynamics of these types of objects.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Model-Agnostic Signal Discovery with Machine Learning: Bridging the Gap Between Theory and Practice

Searches for new phenomena in complex scientific data are predominantly model-dependent, optimized for specific hypotheses, and therefore limited in their coverage of the space of possible signals. Recently, new AI-based model-agnostic search strategies, many of which have been pioneered in high-energy physics, have been proposed which provide a complementary paradigm, prioritizing broad exploration over tailored analyses. These techniques offer an opportunity to enhance the overall discovery potential of modern experiments, especially in regimes where theoretical guidance is scarce. In this document, we review the conceptual framework behind the main classes of AI-based model-agnostic strategies. We discuss the potential pitfalls of these methods, and strategies for their validation and interpretation. We aim for this document to serve as a useful reference both for practitioners and for researchers interested in learning more about these model-agnostic search strategies.

Amram, Oz [Fermilab] (ORCID:0000000237653123)↗
DOE OSTI2024

Insight into premixed diethoxymethane flames: Laminar burning velocities, temperatures, and emissions behaviour

Diethoxymethane ((CH 3 CH 2 O) 2 CH 2 , DEM) is a promising carbon-neutral fuel. DEM is a diether or acetal with a molecular structure similar to oxymethylene ethers (CH 3 O–(CH 2 O)n–CH 3 , OME n ). Thus, DEM can be expected to have a similar combustion behavior to OMEs, reducing harmful emissions such as NO x and particulate matter (PM) in internal combustion engines. From both experimental and kinetic modeling, fundamental studies on DEM are scarce in the literature. More studies are required to gain a detailed insight into the oxidation kinetics of DEM. Laminar burning velocity (LBV) is a critical property that allows a detailed assessment of the potential application of DEM in combustion devices. Unfortunately, the literature on the LBV of DEM is limited. Therefore, in this study we have investigated the LBV of DEM using two reactors for the first time, namely a heat flux burner and a combustion chamber. The experimental data is reported for equivalence ratio between 0.7 and 1.7, initial temperatures of 368–423 K, and initial pressure of 1–5 bar. In addition, we developed a detailed kinetic model extending our recent work of Shrestha et al. (Combust. Flame. 246 (2022) 112,426) to characterize the combustion behavior of DEM utilizing the new experimental data from this work and the literature data. Our model performs remarkably well in capturing the newly measured LBV experimental data over various experimental conditions. We found that DEM and dimethoxy methane (DMM) have similar values of LBVs (within ±1.5 cm/s) for a given condition, which indicates that intermediate chemistry governs the flame chemistry. Despite DEM being a larger molecule that is expected to have slightly lower LBVs than DMM, its effect on the measured values of LBVs is negligible. Finally, we experimentally measured NO x formation in DEM flame for the first time. The stochiometric flame has the highest NO x formation. The proposed model predicted the equivalence ratio dependence of NO x nicely. However, it overestimates the NO x formation for stoichiometric DEM/air mixtures by ~30 %. The model suggests that the thermal NO formation route is favored at lean and stochiometric conditions. In contrast, the prompt NO formation route is enhanced for rich mixtures.

10 SYNTHETIC FUELS↗
DOE OSTI2023

Machine learning for detection of 3D features using sparse x-ray tomographic reconstruction

In many inertial confinement fusion (ICF) experiments, the neutron yield and other parameters cannot be completely accounted for with one and two dimensional models. This discrepancy suggests that there are three dimensional effects that may be significant. Sources of these effects include defects in the shells and defects in shell interfaces, the fill tube of the capsule, and the joint feature in double shell targets. Due to their ability to penetrate materials, x rays are used to capture the internal structure of objects. Methods such as computational tomography use x-ray radiographs from hundreds of projections, in order to reconstruct a three dimensional model of the object. In experimental environments, such as the National Ignition Facility and Omega-60, the availability of these views is scarce, and in many cases only consists of a single line of sight. Mathematical reconstruction of a 3D object from sparse views is an ill-posed inverse problem. These types of problems are typically solved by utilizing prior information. Neural networks have been used for the task of 3D reconstruction as they are capable of encoding and leveraging this prior information. We utilize half a dozen, different convolutional neural networks to produce different 3D representations of ICF implosions from the experimental data. Deep supervision is utilized to train a neural network to produce high-resolution reconstructions. These representations are used to track 3D features of the capsules, such as the ablator, inner shell, and the joint between shell hemispheres. Machine learning, supplemented by different priors, is a promising method for 3D reconstructions in ICF and x-ray radiography, in general.

Wolfe, Bradley T. (ORCID:0000000268301614)↗
DOE OSTI2025

Anisotropic electron damping and energy gap in Bi 2 ⁢Sr 2 ⁢CaCu 2 ⁢O 8+𝛿

The many-body electron-electron interaction in cuprates causes broadening of the electronic bands in 𝒌 space, leading to a deviation from the standard Fermi liquid. While a 𝒌-dependent anisotropic electronic scattering (𝒌-DAES) has been assessed by photoemission, its fingerprint in 𝑸 space has been scarcely considered. Here, we explore the 𝑸-dependent electron dynamics in optimally doped Bi 2⁢ Sr 2 ⁢CaCu 2 ⁢O 8+𝛿 through the evolution of low-energy charge excitations as measured by resonant inelastic x-ray scattering (RIXS). In the normal state, the RIXS spectra display a continuum of excitations down to 0 meV, while the superconducting state features a spectral weight suppression below 80 meV without any enhancement at higher energies. To interpret the energy and 𝑸 evolution of our data, we introduce a phenomenological expression of the charge susceptibility by including the 𝒌-DAES. We show that only the charge susceptibility with 𝒌-DAES captures the RIXS data, highlighting the importance of 𝒌-DAES when describing the 𝑸 dependence of charge excitations from 0 to a few eV scale. Furthermore, we also find that the inclusion of 𝒌-DAES is essential when quantitative parameters such as the electronic energy gap are extracted from RIXS data.

36 MATERIALS SCIENCE↗
NASA NTRS1978

Test and evaluation of 23 electric vehicles for state-of-the-art assessment

Data developed by ERDA used to evaluate the performance parameters of modern electric vehicles is presented with reference to range, acceleration, coast-down, and braking. Eight of the tested vehicles had some type of regenerative braking system, which provided range increases from 1 to 31 percent. In comparison with conventional vehicles, performance was found to be lower, and reliability poorer. Energy consumption was the same, but electric power is less damaging to the environment than hydrocarbon fuels, and does not use up an increasingly scarce resource.

Dustin, M. O.↗
DOE OSTI2022

Counterions under a Surface-Adsorbed Cationic Surfactant Monolayer: Structure and Thermodynamics

The surface adsorption of ionic surfactants is fundamental for many widespread phenomena in life sciences and for a wide range of technological applications. However, direct atomic-resolution structural experimental studies of noncrystalline surface-adsorbed films are scarce. Thus, even the most central physical aspects of these films, such as their charge density, remain uncertain. Consequently, theoretical models based on contradicting assumptions as for the surface films' ionization are widely used for the description and prediction of surface thermodynamics. We employ X-ray reflectivity to obtain the angstrom Ångström-scale surface-normal structure of surface-adsorbed films of the cationic surfactant cetyltrimethylammonium bromide (CTAB) in aqueous solutions at several different temperatures and concentrations. In conjunction with published neutron reflectivity data, we determine the surface-normal charge distribution due to the dissociated surfactants' headgroups. The distribution appears to be inconsistent with the Gouy-Chapman model yet consistent with a compact Stern layer model of condensed counterions. Here, the experimental surfactant adsorption thermodynamics conforms well to classical, Langmuir and Kralchevsky, adsorption models. Furthermore, the Kralchevsky model correctly reproduces the observed condensation of counterions, allowing the values of the adsorption parameters to be resolved, based on the combination of the present data and the published surface tension measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Machine learning interatomic potential for silicon-nitride (Si 3 N 4 ) by active learning

Silicon nitride (Si 3 N 4 ) is an extensively used material in the automotive, aerospace, and semiconductor industries. However, its widespread use is in contrast to the scarce availability of reliable interatomic potentials that can be employed to study various aspects of this material on an atomistic scale, particularly its amorphous phase. In this work, we developed a machine learning interatomic potential, using an efficient active learning technique, combined with the Gaussian approximation potential (GAP) method. Our strategy is based on using an inexpensive empirical potential to generate an initial dataset of atomic configurations, for which energies and forces were recalculated with density functional theory (DFT); thereafter, a GAP was trained on these data and an iterative re-training algorithm was used to improve it by learning on-the-fly. When compared to DFT, our potential yielded a mean absolute error of 8 meV/atom in energy calculations for a variety of liquid and amorphous structures and a speed-up of molecular dynamics simulations by 3–4 orders of magnitude, while achieving a first-rate agreement with experimental results. Our potential is publicly available in an open-access repository.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗