Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Scaling Studies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Reactor Containment Passive Safety Analysis: Steam Condensation in Presence of Non-condensable Gas Scaled Experiment and Modeling

This study presents steam condensation scaled experiments and semi-empirical models in presence of nitrogen (N)—a noncondensable gas (NCG), simulating air in the reactor containment—to support water-cooled small modular reactors (SMRs) passive containment cooling system (PCCS) design and analysis. Previous experimental studies on PCCS are focused on fixed and smaller tube (mostly 2-in.) geometries and specific test condition variations, bringing challenges with geometric scaling and mismatching with SMR prototypic design. To address these challenges, this study presents steam condensation test dataset obtained from three scaled test sections of 1-, 2-, and 4-in.-diameter steam condensers with an annular/jacket cooling of 2-, 3-, and 6 in.-diameter tubes, respectively. Test data were collected for steam ranges from 58 to 63 kg/hr., and NCG flow of 4.4 to 13.3 kg/hr. Annular cooling water flow was varied to obtain required testing conditions of saturated steam inlet and fully condensed outlet. Axial temperature test data of bulk cooling water, steam and condensate were collected by thermocouples for three test sections and various steam-NCG mixing/testing conditions. A standard data reduction method was adopted—utilizing iterative and nodalized mass and heat transfer calculation—to estimate axial local heat fluxes, heat transfer coefficients (HTCs), condensation rates, film thickness, and Nusselt number. Based on the obtained dataset semi-empirical model results—a ratio of experimental and Nusselt’s theoretical HTC are presented. Such results and findings are supportive of developing scaled-up testing facility, to enable model validations and accelerate next generation of reactors development and deployment

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2023

Psychometric property study of the Affective Lability Scale-short form in Chinese patients with mood disorders

Introduction This study aimed to investigate the psychometric properties of the Affective Lability Scale-short form (ALS-SF) among Chinese patients with mood disorders, and to compare ALS-SF subscale scores between patients with major depressive disorder (MDD) and patients with bipolar disorder (BD) depression. Methods A total of 344 patients with mood disorders were included in our study. Participants were measured through a set of questionnaires including the Chinese version of ALS-SF, Patient Health Questionnaire-9 (PHQ-9), Generalized Anxiety Disorder 7-item (GAD-7), and NEO-Five Factor Inventory (NEO-FFI). Exploratory factor analysis and confirmatory factor analysis were applied to examine the psychometric properties of ALS-SF. Besides, correlation and regression analyses were performed to explore the relationship between affective lability and depression, anxiety, and neuroticism. Independent samples t -tests were used to compare the subscale scores of ALS-SF between the MDD and BD depression groups. Results Results of factor analysis indicated that the model of ALS-SF was consistent with ALS-SF. The ALS-SF showed a solid validity and high internal consistency (Cronbach’s alpha = 0.861). In addition, each subscale of ALS-SF was significantly correlated with PHQ-9, GAD-7, and NEO-FFI neuroticism subscale, except for the anger subscale showed no significant correlation with PHQ-9. Besides, the depression/elation and anger factor scores in patients with BD depression were higher than in patients with MDD. Conclusion Our study suggests that the Chinese version of ALS-SF has good reliability and validity for measuring affective lability in Chinese patients with mood disorders. Assessing affective lability would assist clinicians to distinguish between MDD and BP depression and may decrease the risks of misdiagnosis.

Ma, Mohan↗
DOE OSTI2023

A Robust Estimate of Continental-Scale Terrestrial Carbon Sinks Using GOSAT XCO 2 Retrievals

Satellite XCO 2 retrievals could improve the estimates of surface carbon fluxes, but it remains unknown on what scales these estimates are robust. Here, we use the time-dependent Bayesian synthesis top-down method and prior net ecosystem exchanges (NEEs) from 12 terrestrial biosphere models (TBMs) to infer the monthly carbon fluxes of 51 land regions with constraints by GOSAT XCO 2 retrievals. We find that the uncertainty (standard deviation of 12 TBMs) reduction rates (uncertainty reduction rate (URR)) decrease significantly at decreasing spatial scales. On the continental-scale, the mean URR is about 57%, and the annual and seasonal cycle estimates of NEE are rather robust. The evaluation shows that the posterior CO 2 concentrations are significantly improved at the continental scale. Our study suggests that the GOSAT XCO 2 can only promise a robust continental-scale NEE estimate and improving the XCO 2 accuracy is an effective way to achieve robust estimates on smaller scales under current spatial coverage.

58 GEOSCIENCES↗
DOE OSTI2020

Sensitivity of 44 Ti and 56 Ni Production in Core-collapse Supernova Shock-driven Nucleosynthesis to Nuclear Reaction Rate Variations

Recent observational advances have enabled high resolution mapping of 44 Ti in core-collapse supernova (CCSN) remnants. Comparisons between observations and models provide stringent constraints on the CCSN mechanism. However, past work has identified several uncertain nuclear reaction rates that influence 44 Ti and 56 Ni production in postprocessing model calculations. We evolved one-dimensional models of 15 M ⊙ , 18 M ⊙ , 22 M ⊙ , and 25 M ⊙ stars from zero age main sequence through CCSN using Modules for Experiments in Stellar Astrophysics and investigated the previously identified reaction rate sensitivities of 44 Ti and 56 Ni production. In this work, we tested the robustness of our results by making various assumptions about the CCSN explosion energy and mass cut. We found a number of reactions that have a significant impact on the nucleosynthesis of 44 Ti and 56 Ni, particularly for lower progenitor masses. Notably, the reaction rates ${}^{13}{\rm{N}}{(\alpha ,p)}^{16}{\rm{O}}$, ${}^{17}{\rm{F}}{(\alpha ,p)}^{20}\mathrm{Ne}$, ${}^{52}\mathrm{Fe}{(\alpha ,p)}^{55}\mathrm{Co}$, ${}^{56}\mathrm{Ni}{(\alpha ,p)}^{59}\mathrm{Cu}$, ${}^{57}\mathrm{Ni}{(n,p)}^{57}\mathrm{Co}$, ${}^{56}\mathrm{Co}{(p,n)}^{56}\mathrm{Ni}$, ${}^{39}{\rm{K}}{(p,\gamma )}^{40}\mathrm{Ca}$, ${}^{47}{\rm{V}}{(p,\gamma )}^{48}\mathrm{Cr}$, ${}^{52}\mathrm{Mn}{(p,\gamma )}^{53}\mathrm{Fe}$, ${}^{57}\mathrm{Co}{(p,\gamma )}^{58}\mathrm{Ni}$, and ${}^{39}{\rm{K}}{(p,\alpha )}^{36}\mathrm{Ar}$ are influential for a large number of model conditions. Furthermore, we found the list of influential reactions identified by previous postprocessing studies of CCSN shock-driven nucleosynthesis is likely incomplete, motivating future larger-scale sensitivity studies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Hall interchange instability as a seed for helical magneto-Rayleigh–Taylor instabilities in magnetized liner inertial fusion Z-Pinches scaled from Z-Machine parameters to a next generation pulsed power facility

Magnetized liner inertial fusion (MagLIF) is a magneto-inertial-fusion concept that is studied on the 20-MA, 100-ns rise time Z Pulsed Power Facility at Sandia National Laboratories. Given the relative success of the platform, there is a wide interest in studying the scaled performance of this concept at a next-generation pulsed-power facility that may produce peak currents upward of 60 MA. An important aspect that requires more research is the instability dynamics of the imploding MagLIF liner, specifically how instabilities are initially seeded. It has been shown in magnetized 1-MA thin-foil liner Z-pinch implosion simulations that a Hall interchange instability (HII) effect can provide an independent seeding mechanism for helical magneto-Rayleigh–Taylor instabilities. Here in this paper, we explore this instability at higher peak currents for MagLIF using 2D discontinuous Galerkin PERSEUS simulations, an extended magneto-hydrodynamics code, which includes Hall physics. Our simulations of scaled MagLIF loads show that the growth rate of the HII is invariant to the peak current, suggesting that studies at 20-MA are directly relevant to 60-MA class machines.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Validation of Pronghorn’s Subchannel code using the EBR-II shutdown heat removal tests

A Subchannel application (Pronghorn-SC) is developed in MOOSE, which affords the required flow field resolution, while still preserving an engineering-scale approach. This new solver can be natively coupled to Pronghorn and other MOOSE objects to enable full-core, multi-physics, multi-scale engineering studies. This work utilizes the EBR-II SHRT tests to validate the subchannel capabilities. Multi-scale and multi-physics coupling is used to improve the fidelity of the subchannel code calculations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Uniformity and volume-representativity of consecutive submillimetre wafers of shale for SANS and USANS investigations

(Ultra) Small Angle Neutron Scattering (SANS/USANS) is a non-destructive technique suitable for characterization of porous structures from nano- to micro-pore size (1 nm to 20 μm), which has been widely used to characterize accessible and inaccessible porosity in tight unconventional hydrocarbon reservoirs (e.g., shales). Here, in this study, SANS and USANS are used to examine the degree of nano- to micropore uniformity of the rock body on sub-millimetre to centimetre scale. This study presents a test of the hypothesis of volume representativity of pore structure information measured by SANS and USANS for shale wafers (0.22–1 mm) cut from six North American unconventional shale cores of different maturities (New Albany Shale and Marcellus Shale). Experimental reproducibility of USANS is further investigated for two wafers measured using various acquisition times. All samples show that fluctuations of the relative intensity generally decrease from the USANS Q-range (pore size from around 200 nm to 20 μm) to most of the SANS Q-range (pore size from around 5 nm to 700 nm), and peaks in the SANS large-Q region (for pores smaller than about 5 nm). There is a positive correlation between the spatial fluctuation of the relative SANS intensity and the scattering power of shales. In addition, the scattering intensity and its fluctuations is larger for the less mature shale cores. Shale is known to be highly heterogenous and the hypothesis of uniformity does not apply at sub-millimetre scale even for samples that appear homogeneous at visual inspection. This study presents an approach to minimise the variation through sample selection, data interpretation methodology and instrumental reproducibility tests. The best values of the microstructural spatial uniformity for the apparently homogeneous sections of a core (i.e., the SANS and USANS intensity variation) is less than ±10%.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2020

Auger Recombination Lifetime Scaling for Type I and Quasi-Type II Core/Shell Quantum Dots

Having already achieved near-unity quantum yields, with promising properties for light-emitting diode, lasing, and charge separation applications, colloidal core/shell quantum dots have great technological potential. The shell thickness and band alignment of the shell and core materials are known to influence the efficiency of these devices. In many such applications, improving the efficiency requires a deep understanding of multiexcitonic states. In this paper, we elucidate the shell thickness and band alignment dependencies of the biexciton Auger recombination lifetime for quasi-type II CdSe/CdS and type I CdSe/ZnS core/shell quantum dots. We find that the biexciton Auger recombination lifetime increases with the total nanocrystal volume for quasi-type II CdSe/CdS core/shell quantum dots and is independent of the shell thickness for type I CdSe/ZnS core/shell quantum dots. To perform these calculations and compute Auger recombination lifetimes, we developed a low-scaling approach based on the stochastic resolution of identity. The numerical approach provided a framework for studying the scaling of the biexciton Auger recombination lifetimes in terms of the shell thickness dependencies of the exciton radii, Coulomb couplings, and density of final states in quasi-type II CdSe/CdS and type I CdSe/ZnS core/shell quantum dots.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Bubble Relaxation Dynamics in Homopolymer DNA Sequences

Understanding the inherent timescales of large bubbles in DNA is critical to a thorough comprehension of its physicochemical characteristics, as well as their potential role on helix opening and biological function. In this work, we employ the coarse-grained Peyrard–Bishop–Dauxois model of DNA to study relaxation dynamics of large bubbles in homopolymer DNA, using simulations up to the microsecond time scale. By studying energy autocorrelation functions of relatively large bubbles inserted into thermalised DNA molecules, we extract characteristic relaxation times from the equilibration process for both adenine–thymine (AT) and guanine–cytosine (GC) homopolymers. Bubbles of different amplitudes and widths are investigated through extensive statistics and appropriate fittings of their relaxation. Characteristic relaxation times increase with bubble amplitude and width. We show that, within the model, relaxation times are two orders of magnitude longer in GC sequences than in AT sequences. Overall, our results confirm that large bubbles leave a lasting impact on the molecule’s dynamics, for times between 0.5–500 ns depending on the homopolymer type and bubble shape, thus clearly affecting long-time evolutions of the molecule.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Environmental impact of national and subnational carbon policies in China based on a multi-regional dynamic CGE model

Carbon policies are important not only for mitigating global climate change, but also for controlling local and regional air pollution. The large regional disparities in economic development and air pollution across China calls for regionally differentiated policies. Previous studies have not systematically investigated the environmental impacts of regional carbon policies in China covering different spatial scales. This study constructs a multi-regional dynamic computable general quilibrium (CGE) model covering 30 provinces of China to assess the impacts of national and subnational carbon polices on CO2 emissions and co-emitted air pollutants from 2020 to 2050. We consider one national carbon policy which aims to achieve China’s 2030 national CO2 abatement target, as well as three regional policies with the same policy stringency as the national one but only applied to eastern China (EP), the Jiangsu-Shanghai-Zhejiang area (JSZP), and the Beijing-Tianjin-Hebei area (BTHP), respectively. We find that regional policies (EP, JSZP, and BTHP) are as effective in reducing CO2 emissions in their targeted regions as the national policy. However, they lead to an increase in CO2 emissions in untargeted regions (the so-called “emissions leakage”). The CO2 leakage rates, which depend on the policy spatial coverage, are 4%, 13%, and 65% for EP, JSZP, and BTHP, respectively, in 2050. Compared with CO2, changes in air pollutant emissions, including sulfur dioxide (SO2), nitrogen oxides (NOx), volatile organic compounds (VOC), and fine particulate matter (PM2.5), exhibit a similar pattern under all policy scenarios, but the magnitude of change is significantly smaller. Transportation, thermal power, and some energy intensive industries are the three largest contributors to CO2 and air pollutant emission reductions. Our results suggest that regional carbon policy is effective in reducing CO2 and air pollutant emissions in the targeted regions, and extending the spatial coverage or increasing policy stringency can largely inhibit emissions leakage.

Zhang, Wenwen↗
DOE OSTI2023

AN ACID BAKING APPROACH TO ENHANCE RARE EARTH ELEMENT RECOVERY FROM BITUMINOUS COAL SOURCES

Rare earth elements (REE) are a group of 17 elements typically classified as light and heavy rare earth elements, which play a crucial role in developing the latest technologies for energy, defense, and medical sectors. Even though REEs have been found in more than 200 minerals, only bastnaesite, monazite and xenotime are commercially exploited for REE extraction. However, the recent exponential increase in REE demand has spurred countries such as the United States into research for the extraction of REEs from secondary sources such as coal, acid mine drainage, and coal ash. Several coal sources (e.g., Fire Clay seam coal) across the United States have been identified to contain elevated concentrations of rare earth elements (>600 ppm), and various researchers have investigated the feasibility of both physical and hydrometallurgical extraction techniques for rare earth concentration and subsequent extraction. However, both physical and direct leaching were concluded to be inefficient for RE beneficiation and extraction due to low recoveries. Alternatively, thermal treatment provides promising means for RE recovery from bituminous coal sources. The positive impact of thermal treatment/calcination was established to be due to the decarbonization and dehydroxylation of the clays, which released entrapped rare earth elements within the dominant minerals and converted them into an acid-soluble form. Nonetheless, the improvement in recovery was limited to the light REEs (LREEs) with an insignificant increase in the heavy REEs (HREE). It was demonstrated that the light and heavy REEs in the material were associated with difficult-to-leach minerals such as monazite, xenotime, and zircon, which were not decomposed by simple calcination due to their high thermal stability. Hence, roasting in the presence of chemicals was necessary to ensure the decomposition of those REE-containing minerals. As such, this study was focused on the acid baking treatment of bituminous coals with an aim to enhance REE recovery, especially HREEs. Based on the presence of REE minerals like monazite and xenotime, three pre-leach treatment methods, i.e., 1) roasting, 2) direct acid baking, and 3) acid baking after roasting were investigated. Roasting tests at 600 ⁰C revealed that the recovery of light REEs (LREEs) was enhanced while the recovery of HREEs remained relatively unaffected. LREE and HREE recovery values of 38.3% and 21.3%, respectively, were achieved using a 50 g/L sulfuric acid solution at 5% solid concentration and a solution temperature of 75 ⁰C for 2 hours. Comparatively, direct acid baking at 250 °C provided substantial increased LREE and HREE recovery values to approximately 49.4% and 53.0%, respectively, using an equivalent acid dosage. Recoveries were maximized to 77.0% and 79.6% for LREE and HREE, respectively, by roasting followed by acid baking. Similar results were obtained from the treatment of a second bituminous coal source. Due to strong correlations between REE and Al recovery values, tests were performed on kaolinite and illite, which were prominent clay minerals within the source coals. These experiments revealed that the REE recovery improvements were likely a result of dehydroxylation of clays and subsequent release and decomposition of REE-bearing minerals such as monazite, xenotime and zircon. Subsequently, a parametric study was conducted to identify the impact of acid baking parameters on rare earth element recovery. The factors investigated using a three-level statistical experimental program were acid baking time, acid solution concentration, baking temperature, and acid solution-to-solids ratio which were found to significantly impact REE and contaminant element (Al, Fe, and Ca) recovery. An increase in baking temperature up to around 250 ⁰C improved the light and heavy REE recovery values by more than 50 absolute percentage points relative to performances achieved when direct leaching. As aforementioned, acid baking was needed to both decompose the clay minerals and liberate the REE minerals, which allowed access for the acid to solubilize the REEs. Acid concentration of the solution used for acid baking was studied as a means of minimizing the amount of acid needed to achieve a target REE recovery. However, thermo-gravimetric and differential scanning calorimetry analysis (TGA-DSC) of sulfuric acid under oxidizing atmosphere revealed that the addition of water decreased the evaporation temperature, which explains the lower REE recovery values obtained when using acid concentrations less than 100%. Using pure sulfuric acid at an acid-to-solid ratio of 0.8:1 resulted in recovery values of around 70% for both LREEs and HREEs. The decomposition reaction time was relatively quick with 65% of the TREEs recovered within the first 10 minutes. Following the identification of optimum operating conditions through the parametric study, a systematic leaching study was carried out to examine the impact of leaching parameters, such as solid-to-liquid (S/L) ratio, temperature, and time, on REE recovery using acid baking conditions of 1:1 acid to solids ratio at 250 °C for 30 minutes. The solid-to-liquid ratio was varied from 1-20% by weight at 25 °C, 50 °C, and 75 °C solution temperatures. The results indicated that reaction time and solution temperature considerably impacted the recovery of heavy and light REEs. Interestingly, LREE recovery reduced from 68% at 5% S/L to 58% at 20%S/L, whereas HREE recovery of 78% remained unaffected. The decrease in the LREE recovery was determined to be due to La and Ce precipitation, likely through isomorphic substitution with calcium in gypsum. The kinetic data indicated that 67% LREE and 77% HREE recovery could be obtained within the first 15 minutes of the reaction, suggesting fast reaction kinetics. Furthermore, raising the solution temperature from 25 °C to 75 °C increased the LREE and HREE recovery from 60% and 32% to 67% and 79%, respectively. The kinetic modeling results demonstrated that the rate-limiting step in the LREE dissolution was diffusion and chemical reaction, whereas the HREE extraction was controlled by only chemical reaction. The leaching study concluded that using 20% S/L at 75 °C for 15 minutes maximized LREE and HREE recovery. The lab-scale precipitation study showed that Fe and Al in solution could be removed at pH 4.5 followed by REE precipitation at pH 6.0 using 6 mol/L NaOH. Finally, the bench-scale data was used to develop a process flowsheet for REE recovery from low-grade bituminous coal sources using acid baking. Finally, based on the proposed flowsheet, a concentrated RE-cake obtained through selective precipitation at pH 6.5 was re-leached using HCl at pH 1.5. The resultant leachate was used to identify the impact of various operating parameters on REE recovery and purity with an aim to maximize REE precipitation efficiency while minimizing the oxalic acid dosage. The operating parameters for this investigation were oxalic acid dosage, iron (III) contamination, solution pH and temperature. The resultant model suggested that oxalic acid dosage and reaction pH are the most significant factors for the REE precipitation efficiency, followed by the interaction of oxalic dosage and Fe concentration. Test results indicated that increasing the oxalic acid concentration from 0g/L to 80g/L improved the REE precipitation efficiency from approximately 4.2% to 95.0%. Furthermore, raising the solution pH from 0.5 to 2.5 considerably enhanced the precipitation efficiency from 0.0% to 98.9%. A solution temperature elevation decreased REE recovery, which indicated an exothermic reaction between REEs and oxalate anions. Finally, a high level of Fe contamination adversely impacted REE precipitation efficiency. The speciation analysis revealed that the dominant iron species in the solution system were Fe-(C₂O₄)₃³⁻, Fe-(C₂O₄)²⁻, and Fe-(C₂O₄)⁺, which consumed the majority of the oxalate anions

rare earth elements, acid baking, high-temperature↗
DOE OSTI2025

Tailoring mechanical properties of a multi-principal element alloy through a multi-length-scale approach

In this study, a multi-length-scale strengthening approach was used to tailor the microstructure and the mechanical properties of a NiCoCr-based multi-principal element alloy (MPEA). Grain size refinement, severe lattice distortion, and stacking fault energy (SFE) reduction with Mo addition (up to 10 at.%) enhance yield strength by 85% with only 10% reduction in ductility in as-annealed MPEAs. A pronounced increase in the strain hardening rate was observed with the addition of Mo, which is ascribed to the promotion of complex stacking fault (SF) interaction and intersection, accompanied by Lomer-Cottrell (L-C) and Hirth locks inhibiting dislocation motion and substantial increase in the accumulation of back stress. To push the limit of the yield strength further, the Suzuki segregation phenomenon was manipulated by a careful control of SF density by pre-straining and a subsequent 500 °C heat treatment. The stress-strain responses of the pre-strained and heat treated MPEAs showed an obvious SF density and Mo concentration dependence. Furthermore, the yield strength of the pre-strained Mo-added MPEAs with subsequent heat treatment was increased up to true stress of 2.3 GPa with a corresponding fracture elongation of 12% true strain. SFs formed during pre-straining served as Cr segregation sites during subsequent heat treatment, which substantially varies the local SFE within the SF, presenting a roughened landscape and frustrating the dislocation dynamics.

mechanical properties↗
DOE OSTI2021

From Gargamelle to MINERvA: exploring the structure of the nucleon with neutrinos

Neutrino scattering experiments have been exploring the structure of the nucleon with Deep-Inelastic Scattering for over 50 years. Although hints of nucleon structure were available using CERN’s first neutrino beam in the 1960s, the study actually started quantitatively in the early 1970s with the Gargamelle heavy liquid bubble chamber that produced first neutrino confirmation of scaling. This study of nucleon structure continued with both bubble chambers and more massive electronic detectors that, with higher energy neutrino beams and $Q^2$ reach, examined the breaking of this scaling while testing Quantum Chromodynamics. Here, a significant factor when including neutrino explorations of nucleon structure in the overall picture is that to gather significant statistics, neutrino experiments have had to use heavier nuclear targets. It has been experimentally demonstrated that the structure of the nucleon in the nuclear environment is indeed different than the free nucleon structure. Understanding this modified structure has played an important part in the experimental and theoretical exploration of nucleon structure by neutrinos and is one of the important goals of the on-going MINERvA experiment at Fermilab.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Micropolar deep material network

This study extends the Deep Material Network (DMN), a physics-informed machine learning framework, to predict the homogenized mechanical response of composite materials with micropolar (Cosserat-type) constitutive behavior. This extension incorporates microstructure-dependent size effects, enabling accurate, efficient, and size-aware predictions for composites with complex internal architectures. While traditional, direct numerical simulation micropolar models effectively capture size effects by introducing extra local degrees of freedom, they bring significant computational challenges, particularly for multiscale analyses relevant to engineering applications. The micropolar DMN developed in this paper achieves high accuracy while significantly reducing computation time compared to micropolar direct numerical simulations. This advancement enables multiscale analyses and parameter studies that were previously impractical, such as high-cycle fatigue simulations and comprehensive investigations of internal length scale effects notably in size-dependent plastic response and the optimization of lattice structures. By uniting microstructure-sensitive modeling, physics-driven learning, and scalable surrogate modeling, the micropolar DMN paves the way for accelerated material design, large-scale parametric studies, and the reliable incorporation of size-dependent effects across a wide range of engineering applications, including optimization and next-generation composite design.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Contrasting Scale Dependence of Entrainment-Mixing Mechanisms in Stratocumulus Clouds

The apparent turbulent entrainment-mixing mechanism between clouds and surrounding air is scale-dependent; however, such scale dependence has been rarely studied, hindering development of scale-aware entrainment-mixing parameterizations. Here we extend our previous study on cumulus clouds to investigate scale dependence of entrainment-mixing processes in stratocumulus clouds during ACE-ENA and RACORO. In contrast to previous studies, two opposite scale dependencies are found: entrainment-mixing can become more homogeneous or more inhomogeneous with increasing averaging scales, which is quantified by the difference between homogeneous mixing degree at the 100 m and 10 m resolutions. A new heuristic model and two new quantities are introduced. The observations and model show that microphysical properties near and far away from droplet-free air and relative humidity of entrained air determine both the sign and strength of scale dependence, while droplet-free air fraction only affects the strength. The results shed new light on developing scale-aware parameterizations of entrainment-mixing mechanisms.

Gao, Sinan↗
DOE OSTI2026

What Can We Learn from US National Transmission Studies?

Multiple US regions have announced new electricity transmission plans, are actively revisiting the future role of transmission, and could benefit from findings from recent national-scale transmission studies. A review of seven national studies shows that significant transmission expansion is cost-optimal for serving new demand, integrating additional resources, and supporting grid reliability. A majority of the reviewed scenarios, which span a range of policy and technology assumptions, include at least a doubling of the transmission system by 2050. The national studies find substantial net system cost savings from transmission expansion and high benefit-cost ratios for transmission investments. The results are derived through multi-value, nationally coordinated, co-optimized, multi-scenario modeling, which is an approach that could yield lower-cost pathways compared to current industry planning practices.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

A Case Study on Condenser Water Supply Temperature Optimization with a District Cooling Plant

District cooling (DC) continues to proliferate due to increasing global cooling demands and economies of scale benefits; however, most district-scale modeling has focused on heating, and to the best of our knowledge, researchers have yet to model cooling plants featuring waterside economizers in DC settings. With the popular Modelica Buildings library expanding its capabilities to district scale, this study is one of the first to demonstrate how the open-source models can be used for detailed energy and control analysis of a DC plant. For a real-world case study, we developed and calibrated high-fidelity models for a DC system central plant at a college campus in Colorado, USA, and we optimized the condenser water supply temperature (CWST) setpoint for a DC plant across multiple time horizons using the Optimization library in Dymola. Results indicate that annual CWST optimization saves 4.7% annual plant energy, with less than 1% of additional energy savings gained through daily optimization. This confirms previous studies' findings that high frequency CWST optimizations are not necessary for the studied system.

chiller plant↗
DOE OSTI2024

Light new physics in B → K ( * ) ν ν ¯ ?

The study of the rare decays B → K ( * ) ν ν ¯ offers a window into the dynamics operating at the electroweak scale, allowing studies of the Standard Model and searches for heavy new physics. However, the analysis of these decays is also potentially sensitive to the on shell production of new light bosons X through the process B → K ( * ) X . In particular, Belle II has recently measured B + → K + ν ν ¯ , finding a 2.8 σ excess under the assumption of heavy new physics. Since this excess is rather localized in the kaon energy, a fit that includes the decay mode B + → K + X to the kinematic distributions prefers m X ≈ 2 GeV with branching fraction Br [ B → K X ] = ( 8.8 ± 2.5 ) × 10 − 6 and a significance of ≈ 3.6 σ . However, no excess was found in the measurements of B → K ( * ) ν ν ¯ , and a global analysis of the Belle II and data leads to Br [ B → K X ] = ( 5.1 ± 2.1 ) × 10 − 6 with a reduced significance of ≈ 2.4 σ . We then study various simplified dark-flavored models and present a possible UV completion based on a gauged B 3 − L 3 symmetry, highlighting the discovery potential of dedicated searches for B → K ( * ) X at Belle II. Published by the American Physical Society 2024

Astronomy & Astrophysics↗