Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sc”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Microwave Interrogation of Woven Straps under Light Loading for Inflatable Applications

NASA uses woven straps for restraint layers in inflatable structures. This work investigates the use of microwaves to measure low level loading in the woven straps. More specifically, microwaves from a linearly polarized antenna are used to investigate four straps composed of Vectran and Kevlar with ratings of 6,000 lbs and 12,000 lbs of force. The straps are all lightly loaded from 2kg to 10kg in 2kg increments. The spectral centroid (SC) technique has been used for the dimensionality reduction method to evaluate the microwave data. The SC method was used to reduce the data from 10001 points to a single point that corresponds to the amount of load on the strap.

Microwave↗
NASA NTRS2024

Improved Mechanical Performance in FDM Cellular Frame Structures through Partial Incorporation of Faces

The utilization of lattice-type cellular architectures has seen a significant increase, owing to their predictable shape and the ability to fabricate templated porous materials through low-cost 3D-printing methods. Frames based on atomic lattice structures such as face-centered cubic (FCC), body-centered cubic (BCC), or simple cubic (SC) have been utilized. In FDM, the mechanical performance has been impeded by stress concentration at the nodes and melt-solidification interfaces arising from layer-by-layer deposition. Adding plates to the frames has resulted in improvements with a concurrent increase in weight and hot-pocket-induced dimensional impact in the closed cells formed. In this paper, we explore compressive performance from the partial addition of plates to the frames of a SC-BCC lattice. Compression testing of both single unit cells and 4 × 4 × 4 lattices in all three axial directions is conducted to examine stress transfer to the nearest neighbor and assess scale-up stress transfer. Our findings reveal that hybrid lattice structure unit cells exhibit significantly improved modulus in the range of 125% to 393%, specific modulus in the range of 13% to 120%, and energy absorption in the range of 17% to 395% over the open lattice. The scaled-up lattice modulus increased by 8% to 400%, specific modulus by 2% to 107%, and energy absorption by 37% to 553% over the lattice frame. Parameters that emerged as key to improved lightweighting.

FDM↗
NASA NTRS2024

Scalability in SLA lattice through lattice orientation and hybrid frame and plate architectures

Lightweighting has been a key goal for engineers and designers, with lattice structures widely explored as the building blocks for structural components. Cellular structure-inspired lattice truss frame designs made of struts, have been extensively studied. All plate-based lattice designs have superior mechanical performance. Limits in scalability occur from formation of closed pockets limiting uv curing in processes like stereolithography (SLA). We examine hybrid frame and plate body-centered cubic-simply cubic (BCC-SC) lattices under compression. Unit cells and scaled up lattice exhibit an increase in yield stress and modulus with the addition of plates. The loading direction on the hybrid frame and plate unit cells affected the magnitude of improvement. Simulations and measurements indicated that the optimal lightweight lattice was determined to be when two plates were placed opposite each other with plates buttressing the struts, inhibiting buckling of the struts aligned with the loading direction. This lattice resulted in 63% improvement in specific modulus, a 137% improvement in specific yield point, and a 360% improvement in specific energy absorption (SEA) and the scaled up 4 × 4 × 4 scaled-up structures, showed a 107%, 148%, and 297% in specific modulus, specific yield point, and SEA, respectively A combined stretching-bending behavior was identified in optimal orientations reflecting the delayed buckling mechanism paired to a rising stress-strain curve past the elastic yield indicating bending resistance. The mass moment of inertia was found to be a key parameter correlating optimum orientation for the same number of plates added to the BCC-SC frame.

Mahan Ghosh↗
NASA NTRS2026

Assessment of Aircraft Electric Engine Regulatory Special Conditions

This report provides a regulatory gap assessment of the Federal Aviation Administration (FAA) and the European Union Aviation Safety Agency (EASA) Special Conditions (SC) for electric engines. This information is presented to support ongoing international harmonization efforts for electric engine certification, to establish a level of safety consistent across regulatory bodies and equivalent to that of existing combustion engines. HS Advanced Concepts LLC assembled a team of subject-matter experts to develop a comprehensive comparison of the regulatory text of EASA SC E-19 and the FAA special conditions for the certification of electric engines. The team included Mr. Chris Baczynski of BAC Aerospace Inc. and Mr. Zach Kaufman, formerly with magniX.

aircraft certification↗
NASA NTRS1968

Crystal structure analysis of intermetallic compounds

Study concerns crystal structures and lattice parameters for a number of new intermetallic compounds. Crystal structure data have been collected on equiatomic compounds, formed between an element of the Sc, Ti, V, or Cr group and an element of the Co or Ni group. The data, obtained by conventional methods, are presented in an easily usable tabular form.

Conner, R. A., Jr.↗
NASA NTRS1971

Bulk, rare earth and other trace elements in Apollo 14 and 15 and Luna 16 samples

The chemical abundances were measured by instrumental and radiochemical neutron activation analysis in a variety of lunar specimens. Apollo 14 soils are characterized by significant enrichments of Al2O3, Na2O and K2O and depletions of TiO2, FeO, MnO and Cr2O3 relative to Apollo 11 and to most of Apollo 12 soils. The uniform abundances in 14230 core tube soils and three other Apollo 14 soils indicate that the regolith is uniform to at least 22 cm depth and within approximately 200 m from the lunar module. Two Luna 16 breccias are similar in composition to Luna 16 soils. Four Apollo 15 soils (LM, STA 4, 9, and 9a) have variable compositions. Interelement correlations between MnO-FeO, Sc-FeO, V-Cr2O3 and K2O-Hf negate the hypothesis that howardite achondrites may be primitive lunar matter, argue against the fission hypothesis for the origin of the moon, and precludes any selective large scale volatilization of alkalies during lunar magmatic events.

Laul, J. C.↗
NASA NTRS1972

A pilot's opinion - VTOL control design requirements for the instrument approach task.

This paper presents pilot opinion supported by test data concerning flight control and display concepts and control system design requirements for VTOL aircraft in the instrument approach task. Material presented is drawn from research flights in the following aircraft: Dornier DO-31, Short SC-1, LTV XC-142A, and Boeing-Vertol CH-46. The control system concepts and mechanizations employed in the above aircraft are discussed, and the effect of control system augmentation is shown on performance. Operational procedures required in the instrument approach task are described, with comments on need for automation and combining of control functions.

Patton, J. M., Jr.↗
NASA NTRS1971

Transition element distribution in stony meteorites and in terrestrial and lunar rocks.

Discussion of the distribution of the transition elements (Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, and Zn) among the individual minerals of stony meteorites, and comparison with data on comparable lunar and terrestrial minerals. As an example of meteorite distribution patterns, data on the Modoc meteorite are presented. For the lunar rocks, microprobe data are used, along with published information from other investigators. For comparison with terrestrial igneous rocks, Skaergaard intrusion rocks are used. They present some striking analogies in mineralogy and petrology with the lunar igneous rocks and are thus peculiarly suitable for this cross comparison.

Mason, B.↗
NASA NTRS1972

Elemental abundances in stone meteorites.

Measurement of abundances of Na, Al, Sc, Cr, Mn, Fe, Co, and Cu by instrumental neutron activation analyses of 103 chondrites and 17 achondrites. Various sources of error in the method, including sampling errors, are discussed in detail. Examination of the patterns of coherence of the elements determined suggests the presence of effects of fractionation during condensation from the solar nebula of matter parental to chondrites. Such effects seem to be exhibited both in the abundances of lithophilic elements, perhaps being related to varied temperatures of accretion and in the abundances of those elements which would be affected by metal-silicate fractionation in the solar nebula. Atomic abundances relative to Si vary little in carbonaceous chondrites, suggesting that efficient mixing processes operated on these meteorites prior to or during their formation. It is suggested that, at present, no single class of carbonaceous chondrites is clearly more primitive than another. Carbonaceous and unequilibrated ordinary chondrites may represent aggregates of material accreted from the solar nebula at relatively low temperatures. The present data support a model of equilibration and minor mobilization of nonvolatile elements within small domains of chondrites after accretion. Such a model would be consistent with the petrologic types of Van Schmus and Wood (1967).

Schmitt, R. A.↗
NASA NTRS1972

Cosmogenic radionuclides in the Allende and Murchison carbonaceous chondrites.

Measurements were made of Na-22, Al-26, Mn-54, and Co-60 produced by cosmic rays in five samples of the Allende C3 meteorite and in one specimen of Murchison (C2); Sc-46, V-48, Cr-51, and Co-57 were also measured in several of these samples. Comparison of observed Allende Co-60 activities with calculated neutron-capture production rates yields a depth scale for Allende that appears unambiguous to about 30-cm depth. Using this scale, the production of Al-26 is constant to a depth in excess of 30 cm, Na-22 activity increases 30% from near the surface of Allende to 20- to 30-cm depth, and Mn-54 production increases 50% over the same depth range.

Cressy, P. J., Jr.↗
NASA NTRS1973

Theory of disordered Heisenberg ferromagnets

A Green's function technique is used to calculate the magnetic properties of Heisenberg ferromagnets in which the exchange interactions deviate randomly in strength from the mean interaction. Systems of sc, bcc, and fcc topologies and of general spin values are treated. Disorder produces marked effects in the density of spin wave states, in the form of enhancement of the low-energy density and extension of the energy band to higher values. The spontaneous magnetization and the Curie temperature decrease with increasing disorder. The effects of disorder are shown to be more pronounced in the ferromagnetic than in the paramagnetic phase.

Stubbs, R. M.↗