Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SUSAN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Rendezvous and docking tracker

A conceptual solid-state rendezvous and docking tracker (RDT) has been devised for generating range and attitude data for a docking vehicle relative to a target vehicle. Emphasis is placed on the approach of the Orbiter to a link with the Space Station. Three laser illuminators ring the optical axis of the lens a directed toward retroreflectors on the target vehicle. Each retroreflector is equipped with a bandpass filter for a designated illumination frequency. Data are collected sequentially over a 20 deg field of view as the range closes to 100-1000 m. A fourth ranging retroreflector 0.3 m from center is employed during close-in maneuvers. The system provides tracking data on motions with 6 deg of freedom, and furnishes 500 msec updates (to be enhanced to 100 msec) to the operator at a computer console.

Ray, Art J.↗

A Lanczos eigenvalue method on a parallel computer

Eigenvalue analyses of complex structures is a computationally intensive task which can benefit significantly from new and impending parallel computers. This study reports on a parallel computer implementation of the Lanczos method for free vibration analysis. The approach used here subdivides the major Lanczos calculation tasks into subtasks and introduces parallelism down to the subtask levels such as matrix decomposition and forward/backward substitution. The method was implemented on a commercial parallel computer and results were obtained for a long flexible space structure. While parallel computing efficiency is problem and computer dependent, the efficiency for the Lanczos method was good for a moderate number of processors for the test problem. The greatest reduction in time was realized for the decomposition of the stiffness matrix, a calculation which took 70 percent of the time in the sequential program and which took 25 percent of the time on eight processors. For a sample calculation of the twenty lowest frequencies of a 486 degree of freedom problem, the total sequential computing time was reduced by almost a factor of ten using 16 processors.

Bostic, Susan W.↗

Experiences with the Lanczos method on a parallel computer

A parallel computer implementation of the Lanczos method for the free-vibration analysis of structures is considered, and results for two example problems show substantial time-reduction over the sequential solutions. The major Lanczos calculation tasks are subdivided into subtasks, and parallelism is introduced at the subtask level. A speedup of 7.8 on eight processors was obtained for the decomposition step of the problem involving a 60-m three-longeron space mast, and a speedup of 14.6 on 16 processors was obtained for the decomposition step of the problem involving a blade-stiffened graphite-epoxy panel.

Bostic, Susan W.↗

Inflow velocity measurements made on a helicopter rotor using a two-component Laser Velocimeter

An experimental investigation was conducted in the 14- by 22-Foot Subsonic Tunnel at NASA Langley Research Center to measure the inflow into a scale model helicopter rotor in forward flight. The measurements were made with a two component Laser Velocimeter (LV) one chord above the plane formed by the path of the rotor tips (tips path plane). A conditional sampling technique was employed to determine the position of the rotor at the time that each velocity measurement was made so that the azimuthal fluctuations in velocity could be determined. The results of these tests were compared with inflow velocities predicted by a current technology rotor wake analysis program.

Elliott, Joe W.↗

Tidal influences on vertical diffusion and diurnal variability of ozone in the mesosphere

Possible dynamical influences on the diurnal behavior of ozone are investigated. A time dependent one-dimensional photochemical model is developed for this purpose; all model calculations are made at 70 deg N during summer. It is shown that the vertical diffusion can vary as much as 1 order of magnitude within a day as a result of large changes in the zonal wind induced by atmospheric thermal tides. It is found that by introducing a dissipation time scale for turbulence produced by breaking gravity waves, the agreement with Poker Flat echo data is improved. Comparisons of results from photochemical model calculations, where the vertical diffusion is a function of height only, with those in which the vertical diffusion coefficient is changing in time show large differences in the diurnal behavior of ozone between 70 and 90 km. By including the dynamical effect, much better agreement with the Solar Mesosphere Explorers data is obtained. The results are, however, sensitive to the background zonally averaged wind. The influence of including time-varying vertical diffusion coefficient on the OH densities is also large, especially between 80 and 90 km. This suggests that dynamical effects are important in determining the diurnal behavior of the airglow emission from the Meinel bands.

Bjarnason, Gudmundur G.↗

A VLA search for 2-cm continuum radiation from Comet Halley

The presently reported VLA search for icy-grain 2-cm continuum emission in the halo surrounding Comet Halley in mid-November, 1985, notes the 3-sigma upper limit for flux density at this wavelength to be consistent with the detections at 1.3 and 3.5 mm by Altenhoff et al. (1986) only in the case where the sources of the emission are inefficiently radiating particles. These particles are surmised to be either icy or small refractory grains; in either case, they would be sub-mm-sized and slightly dirty.

Hoban, Susan↗

Field calibration of reference reflectance panels

A procedure for calibrating reference reflectance panels using the sun as the radiation source and a pressed-polytetrafluoroethylene powder standard is described. The directional/directional reflectance factor and the directional/hemispheric reflectance factor are examined. Directional/directional voltage responses for pressed-halon are analyzed. Three painted BaSO4 and one painted halon were calibrated using the proposed procedure. The effects of diffuse irradiance on reflectance-factor measurements are investigated. It is determined that the method has an accuracy on the order of 1 percent. The advantages and disadvantages of this method are discussed.

Jackson, Ray D.↗

A numerical study of three-dimensional separated flow past a hemisphere cylinder

Separated and vortical flow about a hemisphere-cylinder body has been investigated. An algorithm featuring two implicit factors, and partial flux splitting has been used to solve the thin-layer Navier-Stokes equations. In analyzing the complex flow patterns, experimental data and topological concepts are used to complement the numerical results in interpreting the surface-flow patterns as well as the flowfield structures. Basic issues concerning the three-dimensional separation characteristics and the leeward vortical structures are examined.

Ying, Susan X.↗

Origin and evolution of the layered deposits in the Valles Marineris, Mars

Four hypotheses are discussed concerning the origin of the layered deposits in the Martian Valles Marineris, whose individual thicknesses range from about 70 to 300 m. The hypothesized processes are: (1) aeolian deposition; (2) deposition of remnants of the material constituting the canyon walls; (3) deposition of volcanic eruptions; and (4) deposition in standing bodies of water. The last process is chosen as most consistent with the rhythm and lateral continuity of the layers, as well as their great thickness and stratigraphic relationship with other units in the canyons. Attention is given to ways in which the sediments could have entered an ice-covered lake; several geologically feasible mechanisms are identified.

Nedell, Susan S.↗

Influence of electron radiation and temperature on the cyclic, matrix dominated response of graphite-epoxy

The effects of electron radiation and elevated temperature on the matrix-dominated cyclic response of standard T300/934 and a chemically modified T300/934 graphite-epoxy are characterized. Both materials were subjected to 1.0 x 10 to the 10th rads of 1.0 MeV electron irradiation, under vacuum, to simulate 30 years in geosynchronous orbit. Cyclic tests were performed at room temperature and elevated temperature (121 C) on 4-ply unidirectional laminates to characterize the effects associated with irradiation and elevated temperature. Both materials exhibited energy dissipation in their response at elevated temperature. The irradiated modified material also exhibited energy dissipation at room temperature. The combination of elevated temperature and irradiation resulted in the most severe effects in the form of lower proportional limits, and greater energy dissipation. Dynamic-mechanical analysis demonstrated that the glass transition temperature, T(g), of the standard material was lowered 39 C by irradiation, wereas the T(g) of the modified material was lowered 28 C by irradiation. Thermomechanical analysis showed the occurrence of volatile products generated upon heating of the irradiated materials.

Reed, Susan M.↗

Comparisons of interplanetary type III storm footpoints with solar features

The trajectories of 38 type III storms in the interplanetary medium have been deduced from ISEE-3 radio observations and extrapolated back to the sun to determine the Carrington coordinates of their footpoints. The analysis assumes radial motion of the solar wind, and the trajectories are projected radially back toward the surface for the last few solar radii. To identify the storm sources, the footpoints were compared to a variety of solar features: to the large-scale neutral line at the base of the current sheet, to active regions, to the small-scale neutral lines and H-alpha filaments which trace out active regions, and to coronal holes. Most of the footpoints were found to lie near active regions, in agreement with metric storm locations. There is a weak correlation with H-alpha filaments, no apparent association with the current sheet, and an anticorrelation with coronal holes. There is a small excess of storms in the leading half of magnetic sectors.

Kayser, Susan E.↗

Effect of high-temperature annealing on the microstructure and thermoelectric properties of GaP doped SiGe

Annealing of GaP doped SiGe will significantly alter the thermoelectric properties of the material resulting in increased performance as measured by the figure of merit Z and the power factor P. The microstructures and corresponding thermoelectric properties after annealing in the 1100 to 1300 C temperature range have been examined to correlate performance improvement with annealing history. The figure of merit and power factor were both improved by homogenizing the material and limiting the amount of cross-doping. Annealing at 1215 C for 100 hr resulted in the best combination of thermoelectric properties with a resultant figure of merit exceeding 1x10 to the -3 deg C to the -1 and a power factor of 44 microW/cm/deg C sq for the temperature range of interest for space power: 400 to 1000 C.

Draper, Susan L.↗

An account of a flare related shock event recorded by the energetic particle detector EPONA of the Giotto spacecraft during September 1985 (STIP interval 18)

The Energetic Particle Detector EPONA flown on the Giotto Mission to Halley's Comet was designed to measure electrons, protons, and heavier ions (E greater that 20 keV) in the Comet Halley environment and during the Cruise Phase of the mission (EPONA switch on: 22 August 1985 - Halley encounter: 13 March 1986). In September 1985 (STIP Interval XVIII) a well defined shock event was recorded at EPONA in association with a sequence of solar flares and a preliminary account of this event is presented.

Mckennalawlor, Susan M. P.↗

Conservatism implications of shock test tailoring for multiple design environments

A method for analyzing shock conservation in test specifications that have been tailored to qualify a structure for multiple design environments is discussed. Shock test conservation is qualified for shock response spectra, shock intensity spectra and ranked peak acceleration data in terms of an Index of Conservation (IOC) and an Overtest Factor (OTF). The multi-environment conservation analysis addresses the issue of both absolute and average conservation. The method is demonstrated in a case where four laboratory tests have been specified to qualify a component which must survive seven different field environments. Final judgment of the tailored test specification is shown to require an understanding of the predominant failure modes of the test item.

Baca, Thomas J.↗

AIS-2 spectra of California wetland vegetation

Spectral data gathered by Airborne Imaging Spectrometers-2 from wetlands were analyzed. Spectra representing stands of green Salicornia virginica, green Sesuvium verrucosum, senescing Distichlis spicata, a mixture of senescing Scirpus acutus and Scirpus californicus, senescing Scirpus paludosus, senescent S. paludosus, mowed senescent S. paludosus, and soil were isolated. No difference among narrowband spectral reflectance of the cover types was apparent between 0.8 to 1.6 micron. There were, however, broadband differences in brightness. These differences were sufficient to permit a fairly accurate decomposition of the image into its major cover type components using a procedure that assumes an additive linear mixture of surface spectra.

Gross, Michael F.↗

Iterative-deepening heuristic search for optimal and semi-optimal resource allocation

It is demonstrated that when iterative-deepening A asterisk (IDA asterisk) is applied to one type of resource allocation problem, it uses far less storage than A asterisk, but opens far more nodes and thus has unacceptable time complexity. This is shown to be due, at least in part, to the low-valued effective branching factor that is a characteristic of problems with real-valued cost functions. The semi-optimal, epsilon-admissible IDA asterisk sub epsilon search algorithm that the authors described was shown to open fewer nodes than both A asterisk and IDA asterisk with storage complexity proportional to the depth of the search tree.

Bridges, Susan M.↗

BE Ursae Majoris: A detached binary with a unique reprocessing spectrum

New infrared photometry, optical and UV spectrophotometry, and a photographic ephemeris are presented for the detached binary BE UMa. Results show the primary to be a DO white dwarf with an effective temperature of 80,000 + or - 15,000 K and a mass of 0.6 + or - 0.1 solar masses. No evidence is found for variability of the primary. The main sequence secondary star is shown to be of early M spectral type, with a formal range of M1 to M5 being possible. A reflection effect in reprocessed line and continuum radiation is produced by EUV radiation from the primary incident on the secondary atmosphere. It is suggested that the temperature of the reprocessed component of the secondary's atmosphere is in the 5000 to 8500 K range, and that emission lines of decreasing ionization form deeper in the irradiated envelope. Relatively narrow He II and high excitation metal lines are formed from recombination and continuum fluorescence processes.

Ferguson, Donald H.↗