Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

STS-3 Induced Environment Contamination Monitor (IECM): Quick-look report

The STS-3/Induced Environment Contamination Monitor (IECM) mission is described. The IECM system performance is discussed, and IECM mission time events are briefly described. Quick look analyses are presented for each of the 10 instruments comprising the IECM on the flight of STS-3. Finally, a short summary is presented and plans are discussed for future IECM flights, and opportunities for direct mapping of Orbiter effluents using the Remote manipulator System.

Miller, E. R.↗
NASA NTRS1982

Atmospheric environment for Space Shuttle (STS-4) launch

Selected atmospheric conditions observed near space shuttle STS-4 launch time on June 27, 1982, at Kennedy Space Center, Florida are summarized. Values of ambient pressure, temperature, moisture, ground winds, visual observations (cloud), and winds aloft are included. The sequence of prelaunch Jimsphere measured vertical wind profiles is given as well as the wind and thermodynamic parameters measured at the surface and aloft in the SRB descent/impact ocean area. Final meteorological tapes, which consist of wind descent were constructed. The STS-4 ascent meteorological data tape was constructed by Marshall Space Flight Center in response to shuttle task agreement No. 989-13-22-368 with Johnson Space Center.

Johnson, D. L.↗
NASA NTRS1983

Airborne measurements of launch vehicle effluent: Launch of Space Shuttle (STS-1) on 12 April 1981

Launch vehicle effluent environmental impact activities from the first space shuttle (STS-1) included airborne measurements within the exhaust cloud from about 9 min after launch (T + 9) to T + 120 min. Measurements included total hydrogen chloride (gaseous plus aqueous) concentrations, particulate concentrations, temperature, and dewpoint temperature. The airborne measurements are summarized. The physical growth and behavior of exhaust clouds is presented as well as the results of laboratory analysis of elemental composition of particulate samples collected by the aircraft. Observed results from the STS-1 launch are compared with earlier Titan III results. Shuttle effluent concentrations are found to be within the range of Titan III observations.

Gregory, G. L.↗
NASA NTRS1983

Role of simulation and emulation in the development of Shuttle-Centaur (STS-Centaur)

To support the task of integrating the Centaur liquid-fueled upper-stage space vehicle into the space shuttle program. A system to simulate and emulate the STS-Centaur avionic flight system and its supporting ground control and checkout equipment was selected and designated the systems integration facility (SIF). Located in San Diego, California, the SIF is composed of integrated simulators that form a composite control system complement to the STS-Centaur airborne and avionic support equipment. An off-line capability to verify the system design of the Centaur airborne support equipment (CASE) and the Centaur avionic flight system is provided as well as a realistic medium for the development and integration of ground checkout and airborne control software programs. Each simulator is composed of prototype hardware, where feasible, to maximize configuration likeness. Where emulated flight or ground hardware is used, it provides physical characteristics (loads, signals, etc.) equivalent to those of the flight hardware. The hardware and software implementation of the SIF are described.

Gordan, A. L.↗
NASA NTRS1983

Observations of optical emissions on STS-4

Following the discovery of intense vehicle glow of the Space Shuttle on the STS-3 mission, a new experiment to probe this phenomenon was developed and flown on the Shuttle STS-4 mission. A conventional camera was equipped with an objective transmission grating and several photographic exposures were taken of the Shuttle tail from the aft flight deck window. Vehicle glow surrounding Shuttle surfaces exposed to the ram direction was observed on a long (400 second) exposure. From analysis of the resulting spectral data it appears that the Shuttle glow has a diffuse spectral component in the region 6300 to 8000A. In addition, it has been possible to assess the spectral character of light emitted by the firing of a reaction control system thruster. Our data show that the light emitted from the thruster gases is confined to wavelengths shorter than 7200A.

Mende, S. B.↗
NASA NTRS1983

Shuttle Entry Air Data System concepts applied to Space Shuttle Orbiter flight pressure data to determine air data - STS 1-4

The Shuttle Entry Air Data System (SEADS) is the implementation of a new concept in air data systems, with application to entry vehicles. This concept incorporates an array of flush orifices in the nose and forward fuselage of the vehicle and a new flowfield modeling concept for the analysis of flight data and the determination of the required air data parameters. Although the SEADS has not been fully demonstrated, a developmental analysis capability has been assembled and demonstrated. This analytical capability has been used to analyze selected Development Flight Instrumentation (DFI) pressure data from STS-1 through STS-4 and determine angle of attack and freestream dynamic pressure. The results of this study verify the potential of the SEADS as a highly fault tolerant operational air data system. In addition, the transition of SEADS from its present status as an experimental system to an operational system is shown to be readily achievable.

Siemers, P. M., III↗
NASA NTRS1984

Atmospheric environment for Space Shuttle (STS-11) launch

Atmospheric conditions observed near Space Shuttle STS-11 launch time on February 3, 1984, at Kennedy Space Center, Florida are summarized. Values of ambient pressure, temperature, moisture, ground winds, visual observations (cloud), and winds aloft are included. The sequence of prelaunch Jimsphere measured vertical wind profiles are reported. Wind and thermodynamic parameters representative of surface and aloft conditions in the SRB descent/impact ocean area are presented. Meteorological tapes, which consist of wind and thermodynamic parameters vesus altitude, for STS-11 vehicle ascent and SRB descent/impact were constructed.

Johnson, D. L.↗
NASA NTRS1984

Atmospheric environment for space shuttle (STS-13) launch

Selected atmospheric conditions observed near Space Shuttle STS-13 launch time on April 6, 1984, at Kennedy Space Center Florida are summarized. Values of ambient pressure, temperature, moisture, ground winds, visual observations (cloud), and winds aloft are included. The sequence of prelaunch Jimsphere measured vertical wind profiles is given. The final meteorological tape, which consists of wind and thermodynamic parameters versus altitude, for STS-13 vehicle ascent was constructed by Marshall Space Flight Center in response to shuttle task agreement No. 561-81-22-368 with Johnson Space Center.

Johnson, D. L.↗
NASA NTRS1984

STS-13 (41-C) BET products

Results from the STS-13 (41-C) Shuttle entry flight are presented. The entry trajectory was reconstructed from an altitude of 700 kft through rollout on Runway 17 at EAFB. The anchor epoch utilized was April 13, 1984 13(h)1(m)30.(s)0 (46890(s).0) GMT. The final reconstructed inertial trajectory for this flight is BT13M23 under user catalog 169750N. Trajectory reconstruction and Extended BET development are discussed in Section 1 and 2, respectively. The NOAA totem-pole atmosphere extracted from the JSC/TRW BET was adopted in the development of the LaRC Extended BET, namely ST13BET/UN=274885C. The Aerodynamic BET was generated on physical nine track reel NC0728 with a duplicate copy on NC0740 for back-up. Plots of the more relevant parameters from the AEROBET are presented in Section 3. Section 4 discusses the MMLE input files created for STS-13. Appendices are attached which present spacecraft and physical constants utilized (Appendix A), residuals by station and data type (Appendix B), a two second spaced listing of trajectory and air data parameters (Appendix C), and input and output source products for archival (Appendix D).

Findlay, J. T.↗
NASA NTRS1983

Medical results from STS 1-4 - Analysis of body fluids

Venous blood was drawn from the eight crewmembers of Space Shuttle flights STS-1 through STS-4 three times before lift-off and twice after landing, and the characteristics of biochemical blood components were evaluated. Twenty-four-hour urine pools were collected 30 d before flight and on landing day or day 4 after landing, and electrolytes, selected hormones and other components were measured. The results indicated that, although fluid and electrolyte loss occur during space flight, conservation of these substances is begun almost immediately upon cessation of weightlessness. Enzyme and hormone measurements indicated that landing may have caused some stress on crewmembers.

Leach, C. S.↗
NASA NTRS1983

Temperature-controlled quartz crystal microbalance measurements on Space Transport System (STS-2)

The purpose of the Temperature-Controlled Quartz Crystal Microbalance (TQCM) system on STS-2 was to measure condensible molecular flux in the payload bay of the Space Shuttle as a function of temperature, direction, and time. Five quartz crystal microbalance sensors were located in the IECM to measure molecular adsorption in each of the Orbiter axes, +X (fore), -X (aft), +Y (starboard), -Y (port), and -Z (up, perpendicular to payload bay). The temperature of each sensor was controlled by a thermoelectric device so contamination could be measured as a function of four preset temperatures: +30, 0, -30, and -60 C. When orbital altitude was reached, the TQCM sensors began their orbital measuring cycle routine. The sensors were commanded to 80 C for 30 min, which was used as an initial clean-up. They were then stepped through a program of 2-nr collection periods at each temperature with a 30-min, 80 C period between each collection period. The collection periods progressed in descending order from +30 to -60 C and, then the cycle was repeated. Since the STS-2 orbital phase lasted approximately 53 hrs, the TQCM system completed four cycles and was in the fifth when the mission was terminated.

Fountain, J. A.↗
NASA NTRS1983

Electrophoretic purification of cells in space - Evaluation of results from STS-3

The procedure and results of Electrophoresis Equipment Verification Test, designed to examine electrophoretic behavior of animal cells is suspension more concentrated than possible on earth and flown on the Shuttle flight STS-3, were discussed. Ground-based laboratory values of electrophoretic mobilities of a mixture of human and rabbit aldehyde-fixed red blood cells (RBC) were compared with those recorded at 11 minute intervals on the Shuttle STS-3. RBC migration and separation observed through photographic records were not as expected. However, cell mobilities and migrating band profiles were consistent with the results of laboratory simulation experiments. It was concluded that zero G electrophoresis of very high concentrations (1 x 10 to the 9th) is possible and similar to electrophoresis of normal cell concentrations on earth.

Sarnoff, B. E.↗
NASA NTRS1984

STS atmospheric luminosities

During the STS-8 space shuttle mission special photographic and TV operations were carried out to record the properties of the spacecraft induced luminosities. One of these luminous phenomena is the quiescent vehicle glow which was photographed during the STS-8 mission with an image intensified photographic camera, with and without an objective grating. During the latter part of the mission the altitude of the shuttle was relatively low (120 n.m. = 222 km) and unprecedentedly high intensity of the glow was observed. The crew reported that the glow was easily visible to the naked eye. The proper orientation of the shuttle with respect to the velocity vector and the objective grating permitted the exposure of good objective spectrum of the glow in the visible region. From the results it is clear that the spectrum appears to be a continuum as observed by the image intensifier objective grating camera. Qualitative examination of the data shows that there is very tail little glow ion the wavelength range of 4300 to about 5000 angstroms. Above 5000 angstroms the glow becomes stronger towards the red and then it falls off towards higher wavelength and of the spectrum presumably because of the responsivity of the device.

Mende, S. B.↗
NASA NTRS1985

STS 8 Orbiter mission window pitting and the possible association with the El Chichon eruption of March and April 1982

The possibility that the pitting that occurred in the STS-8 Orbiter windows was caused by dust from the El Chichon volcano eruption in March-April 1982 is considered. The pit density was more than 30/sq cm, most being 2.5-5 microns deep, and showed no evidence of impact melting. An 'alley' of higher incidence of pits in one window coincided with the line of a seam between TPS tiles. The particles causing the sandblasting were concluded to have arrived in parallel and could not be attributed to the ET, SRBs or a dust storm. The sulfuric gas-rich El Chichon plume injected sufficient material into the atmosphere so that the globe was soon encircled. Most of the resulting particulates (480-8400 tons) stayed in the Northern Hemisphere, and H2SO4 and ash concentrations were high during the STS-8 mission. The Orbiter cut through the debris layer at 19.8 km altitude at a 10 deg angle of attack, which matches the particle crater impact angle in the Orbiter windows. Since the passage was at night, larger H2SO4 droplets may have coalesced and formed larger particles on available solid nuclei, thus producing the 20-40 microns cratering observed in the windows.

Cour-Palais, B. G.↗
NASA NTRS1985

The role of artificial intelligence and expert systems in increasing STS operations productivity

Artificial Intelligence (AI) is discussed. A number of the computer technologies pioneered in the AI world can make significant contributions to increasing STS operations productivity. Application of expert systems, natural language, speech recognition, and other key technologies can reduce manpower while raising productivity. Many aspects of STS support lend themselves to this type of automation. The artificial intelligence section of the mission planning and analysis division has developed a number of functioning prototype systems which demonstrate the potential gains of applying AI technology.

Culbert, C.↗
NASA NTRS1985

STS flight operations - Concept versus reality

The NASA Lyndon B. Johnson Space Center Mission Operations Directorate (MOD) has the responsibility for planning, training, and implementing of flight operations in support of the National Space Transportation System (STS) Program. In this role, MOD has responsibility for the operational interface with customers and the translation of customer requirements into operating plans to satisfy their objectives. The basic objectives of flight operations are to maximize mission success, to minimize risks to the Orbiter and the crew, to decrease operating costs, and to achieve an effective balance in the application of all operational resources. In the National STS Program, to date, 20 missions have been flown and the process for planning, training, and flight operations has been thoroughly exercised. In this paper, MOD's performance is assessed, and those areas in which our initial operating concepts have been successful as well as those in which significant additional work is required are identified.

Kranz, E. F.↗
NASA NTRS1987

Effect of STS space suit on astronaut dominant upper limb EVA work performance

The STS Space Suited and unsuited dominant upper limb performance was evaluated in order to quantify future EVA astronaut skeletal muscle upper limb performance expectations. Testing was performed with subjects standing in EVA STS foot restraints. Data was collected with a CYBEX Dynamometer enclosed in a waterproof container. Control data was taken in one g. During one g testing, weight of the Space Suit was relieved from the subject via an overhead crane with a special connection to the PLSS of the suit. Experimental data was acquired during simulated zero g, accomplished by neutral buoyancy in the Weightless Environment Training Facility. Unsuited subjects became neutrally buoyant via SCUBA BC vests. Actual zero g experimental data was collected during parabolic arc flights on board NASA's modified KC-135 aircraft. During all test conditions, subjects performed five EVA work tasks requiring dominant upper limb performance and ten individual joint articulation movements. Dynamometer velocities for each tested movement were 0 deg/sec, 30 or 60 deg/sec and 120 or 180 deg/sec, depending on the test, with three repetitions per test. Performance was measured in foot pounds of torque.

Greenisen, Michael C.↗