Gentle support stands for fluid-line mockups
Screw clamp stand for fluid-line mockup support prevents distortion of tubing by color coded indicator lamps that acknowledge clamp contact.
Millet, A. U.↗
SEARCH · Engineering Papers
Results for “STAND”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Measurements of the Poynting vector of standing hydromagnetic waves at geosynchronous orbit
The observation is discussed of a train of hydromagnetic waves with a period of about 150 sec seen at synchronous orbit by the ATS 6 spacecraft on June 27, 1974. The critical observation is a phase shift of 90 deg between east-west oscillations of the particle flow and the east-west component of magnetic field oscillations. This phase shift alone suggests a standing rather than a propagating hydromagnetic wave. Careful processing of the particle data makes it possible to determine the drift velocity and hence the electric field of the wave. The wave electric field together with the time-varying magnetic field reveals an oscillating Poynting vector with zero mean component aligned with the ambient magnetic field and nonzero azimuthal (westward) component.
Cummings, W. D.↗
Static test-stand performance of the YF-102 turbofan engine with several exhaust configurations for the Quiet Short-Haul Research Aircraft (QSRA)
The performance of a YF-102 turbofan engine was measured in an outdoor test stand with a bellmouth inlet and seven exhaust-system configurations. The configurations consisted of three separate-flow systems of various fan and core nozzle sizes and four confluent-flow systems of various nozzle sizes and shapes. A computer program provided good estimates of the engine performance and of thrust at maximum rating for each exhaust configuration. The internal performance of two different-shaped core nozzles for confluent-flow configurations was determined to be satisfactory. Pressure and temperature surveys were made with a traversing probe in the exhaust-nozzle flow for some confluent-flow configurations. The survey data at the mixing plane, plus the measured flow rates, were used to calculate the static-pressure variation along the exhaust nozzle length. The computed pressures compared well with experimental wall static-pressure data. External-flow surveys were made, for some confluent-flow configurations, with a large fixed rake at various locations in the exhaust plume.
Mcardle, J. G.↗
On the pressure field of nonlinear standing water waves
The pressure field produced by two dimensional nonlinear time and space periodic standing waves was calculated as a series expansion in the wave height. The high order series was summed by the use of Pade approximants. Calculations included the pressure variation at great depth, which was considered to be a likely cause of microseismic activity, and the pressure distribution on a vertical barrier or breakwater.
Schwartz, L. W.↗
Use of Seasat satellite radar imagery for the detection of standing water beneath forest vegetation
The Seasat synthetic aperture radar, operating at a 23-cm, L-band wavelength, detected anomalous tonal patterns in areas having relatively uniform vegetable canopy. These anomalously high radar returns were shown to be related more to the underlying terrain (areas of standing water) than to the vegetation canopy. These results show that L-band radars, imaging forested terrain in a Seasat configuration, are sensitive to gross changes in vegetation, and may even penetrate the vegetation canopy, providing an unmistakable radar signature. Properly designed space imaging radar shuttle experiments, using multiple frequency and polarization radars of various depression angles, may provide documentation for a flood-monitoring capability. Height, configuration, and density of the biomass in conjunction with frequency and incidence angle of the imaging system are shown to be important factors in formulating a backscatter model, but the relative significance of each is yet to be determined.
Macdonald, H. C.↗
Operational evaluation of a proppeller test stand in the quiet flow facility at Langley Research Center
Operational proof tests of a propeller test stand (PTS) in a quiet flow facility (QFF) are presented. The PTS is an experimental test bed for acoustic propeller research in the quiet flow environment of the QFF. These proof tests validate thrust and torque predictions, examine the repeatability of measurements on the PTS, and determine the effect of applying artificial roughness to the propeller blades. Since a thrusting propeller causes an open jet to contract, the potential flow core was surveyed to examine the magnitude of the contraction. These measurements are compared with predicted values. The predictions are used to determine operational limitations for testing a given propeller design in the QFF.
Block, P. J. W.↗
Standing waves along a microwave generated surface wave plasma
Two surface wave plasma columns, generated by microwave power in argon at gas pressures of 0.05 torr to 330 torr, interact in the same discharge tube to form standing surface waves. Radial electric field and azimuthal magnetic field outside the discharge tube are measured to be 90 deg out of phase with respect to axial position and to decay exponentially with radial distance from the tube axis. Maximum light emission occurs at the position of maximum azimuthal magnetic field and minimum radial electric field. Electron temperature and density are measured at low pressures with double probes inserted into the plasma at a null of radial electric field. Measured electron densities compare well with those predicted by Gould-Trivelpiece surface wave theory.
Rogers, J.↗
The effects of controls and controllable and storage loads on the performance of stand-alone photovoltaic systems
Stand-alone photovoltaic systems have been modeled and analyzed from sunlight in to consumer product out. By including the consumer product in the analysis, concepts such as 'product storage' (a storage tank for water or cold-plates for refrigeration) and loads controllable by the system controller have been added to the system analysis. From a controls analysis viewpoint, this adds state variables to the system. The result is that the system controller can make operating control decisions on the energy flow between these various system elements to optimize system performance and reduce system cost. The effects on system performance of various control schemes employing these concepts are presented. Analysis of water pumping and/or refrigeration systems show possible performance improvements of greater than 15% with the addition of controllable loads with product storage.
Cull, R. C.↗
DOE and AID stand-alone photovoltaic activities
The NASA Lewis Research Center (LeRC) is managing stand-alone photovoltaic (PV) system activities sponsored by the U.S. Department of Energy (DOE) and the U.S. Agency for International Development (AID). The DOE project includes village PV power demonstration projects in Gabon (four sites) and the Marshall Islands, PV-powered medical refrigerators in six countries, PV system microprocessor control development activities and PV-hybrid system assessments. The AID project includes a large village system in Tunisia, a water pumping/grain grinding project in Upper Volta, five medical clinics in four countries, PV-powered remote earth station application. These PV activities and summarizes significant findings to data are reviewed.
Bifano, W. J.↗
Effects of wind on turbofan engines in outdoor static test stands
Wind can affect measured thrust and can cause turbofan engine speed to fluctuate during outdoor testing. Techniques used at an outdoor test stand at NASA Lewis Research Center to make testing easier and faster and to improve data repeatability include using an inflow control device (ICD) to make fan speed steadier, taking many raw data samples for better averaging, and correcting thrust for wind direction and speed. Data from engine tests are presented to show that the techniques improve repeatability of thrust and airflow measurements under various wind conditions.
Mcardle, J. G.↗
Photovoltaic stand-alone modular systems, phase 2
The final hardware and system qualification phase of a two part stand-alone photovoltaic (PV) system development is covered. The final design incorporated modular, power blocks capable of expanding incrementally from 320 watts to twenty kilowatts (PK). The basic power unit (PU) was nominally rated 1.28 kWp. The controls units, power collection buses and main lugs, electrical protection subsystems, power switching, and load management circuits are housed in a common control enclosure. Photo-voltaic modules are electrically connected in a horizontal daisy-chain method via Amp Solarlok plugs mating with compatible connectors installed on the back side of each photovoltaic module. A pair of channel rails accommodate the mounting of the modules into a frameless panel support structure. Foundations are of a unique planter (tub-like) configuration to allow for world-wide deployment without restriction as to types of soil. One battery string capable of supplying approximately 240 ampere hours nominal of carryover power is specified for each basic power unit. Load prioritization and shedding circuits are included to protect critical loads and selectively shed and defer lower priority or noncritical power demands. The baseline system, operating at approximately 2 1/2 PUs (3.2 kW pk.) was installed and deployed. Qualification was successfully complete in March 1983; since that time, the demonstration system has logged approximately 3000 hours of continuous operation under load without major incident.
Naff, G. J.↗
Formation of standing shocks in stellar winds and related astrophysical flows
Stellar winds and other analogous astrophysical flows can be described, to lowest order, by the familiar one dimensional hydrodynamic equations which, being nonlinear, admit in some instances discontinuous as well as continuous transonic solutions for identical inner boundary conditions. The characteristics of the time dependent differential equations of motion are described to show how a perturbation changes profile in time and, under well defined conditions, develops into a stationary shock discontinuity. The formation of standing shocks in wind type astrophysical flows depends on the fulfillment of appropriate necessary conditions, which are determined by the conservation of mass, momentum and energy across the discontinuity, and certain sufficient conditions, which are determined by the flow's history.
Tsinganos, K.↗
Effects of wind on turbofan engines in outdoor static test stands
Wind can affect measured thrust and can cause turbofan engine speed to fluctuate during outdoor testing. Techniques used at an outdoor test stand at NASA Lewis Research Center to make testing easier and faster and to improve data repeatability include using an inflow control device (ICD) to make fan speed steadier, taking many raw data samples for better averaging, and correcting thrust for wind direction and speed. Data from engine tests are presented to show that the techniques improve repeatability of thrust and airflow measurements under various wind conditions. Previously announced in STAR as N83-34945
Mcardle, J. G.↗
Standing hydromagnetic oscillations in the magnetosphere
The mechanisms for generating Alfven waves in the magnetosphere are determined, on the basis of a comprehensive survey of satellite magnetometer data. The mechanisms are classified in terms of the physical properties of standing Alfven waves such as the direction of the major axis of polarization, harmonic mode, and the azimuthal wave number. In an analysis of the statistical organization of the pulsations, it is shown that the most common transverse waves seem to be azimuthally polarized waves involving the fundamental and several harmonics, with radially polarized waves excited at the second harmonic. The former are probably driven externally, while the latter are likely to be excited internally through particle-wave interactions.
Takahashi, K.↗
The formation of a standing shock in a polytropic solar wind model within 1-10 Rs
It is shown how a one-fluid polytropic solar wind model exhibits properties similar to an isothermal wind when localized momentum and/or rapid area divergence produce multiple critical points in the flow. In particular, it is shown that when the sonic transition in the flow occurs closer to the coronal base, multiple steady solutions can exist. These multiple steady solutions consist of a contiuous solution passing through the innermost critical point and other steady solutions involving a steady shock transition. By following the temporal evolution of the solar wind from a steady state with one critical point to a steady state with three critical points, it is shown that a standing shock solution is more likely to develop than a continuous solution when momentum deposition occurs close to the coronal base and the equation of motion admits multiple steady solutions. This result is particularly relevant to the solar wind when momentum deposition occurs as a result of a rapidly diverging coronal hole geometry.
Habbal, S. R.↗
Force on a heated sphere in a horizontal plane acoustic standing wave field
The force on a heated sphere in a horizontal plane acoustic standing wave field is the subject of this investigation. The heated sphere produces a thermal gradient in the resonance chamber. The force on the sphere in a direction perpendicular to that of gravity is measured. This force is enhanced in the region near the pressure node, and is weakened in the region near the pressure antinode. Measurements of the force on a heated sphere with sound pressure levels between 148 and 156 dB are presented.
Leung, E. W.↗
Status of DOE and AID stand-alone photovoltaic system field tests
The NASA Lewis Research Center (LeRC) is managing stand-alone photovoltaic (PV) system projects sponsored by the U.S. Department of Energy (DOE) and the U.S. Agency for International Development (AID). The DOE project includes village PV power demonstration projects in Gabon (four sites) and the Marshall Islands, and PV-powered vaccine refrigerator systems in six countries. The AID project includes a large village power system, a farmhouse system and two water pumping-irrigation systems in Tunisia, a water pumping/grain grinding system in Upper Volta, five medical clinic systems in four countries, PV-powered vaccine refrigerator systems in 18 countries and a PV-powered remote earth station in Indonesia. This paper reviews these PV projects and summarizes significant findings to date.
Bifano, W. J.↗
Spectral Characterization of Suspected Acid Deposition Damage in Red Spruce (picea Rubens) Stands from Vermont
In an attempt to demonstrate the utility of remote sensing systems to monitor sites of suspected acid rain deposition damage, intensive field activities, coupled with aircraft overflights, were centered on red spruce stands in Vermont during August and September of 1984. Remote sensing data were acquired using the Airborne Imaging Spectrometer, Thematic Mapper Simulator, Barnes Model 12 to 1000 Modular Multiband Radiometer and Spectron Engineering Spectrometer (the former two flown on the NASA C-130; the latter two on A Bell UH-1B Iroquois Helicopter). Field spectral data were acquired during the week of the August overflights using a high spectral resolution spectrometer and two broad-band radiometers. Preliminary analyses of these data indicate a number of spectral differences in vegetation between high and low damage sites. Some of these differences are subtle, and are observable only with high spectral resolution sensors; others are less subtle and are observable using broad-band sensors.
Vogelmann, J. E.↗