Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SHADOW EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

The ionization of a low-density intercloud medium by a single O star

The ionization structure of hydrogen in a cloud-containing low-density gas surrounding an O star is calculated, emphasizing how UV photons cause the ionization of hydrogen in regions which are totally obscured from the star by neutral clouds. Particular consideration is given to the ionization of such obscured regions by diffuse Lyman continuum radiation produced when H(+) recombines directly to the ground state. The assumed physical structure of the cloud-containing neighborhood of an O star is discussed, a method is outlined for expressing the emission and absorption properties of the neutral clouds and their shadows in terms of effective volume emissivities and absorption coefficients on a line of sight, and equations of radiative transfer are derived for diffuse and stellar radiation in a cloud-containing H II region. Reradiation of Lyman continuum photons from the ionized boundary layer of a neutral cloud or shadow is analyzed. The expected emission measure across a large cloud-containing H II region is determined and found to compare well with that obtained from observations of H-alpha emission around runaway O stars. It is shown that the hydrogen in cloud shadows may be completely ionized by diffuse radiation within approximately half the Stroemgren radius, depending on the extent of that radius, the average frequency of the Lyman continuum radiation from the star, and the average cloud size.

Elmegreen, B. G.↗

Employing static excitation control and tie line reactance to stabilize wind turbine generators

An analytical representation of a wind turbine generator is presented which employs blade pitch angle feedback control. A mathematical model was formulated. With the functioning MOD-0 wind turbine serving as a practical case study, results of computer simulations of the model as applied to the problem of dynamic stability at rated load are also presented. The effect of the tower shadow was included in the input to the system. Different configurations of the drive train, and optimal values of the tie line reactance were used in the simulations. Computer results revealed that a static excitation control system coupled with optimal values of the tie line reactance would effectively reduce oscillations of the power output, without the use of a slip clutch.

Hwang, H. H.↗

Measurement of satellite PCS fading using GPS

A six-channel commercial GPS receiver with a custom-made 40 deg tilted, rotating antenna has been assembled to make fade measurements for personal satellite communications. The system can measure up to two times per minute fades of up to 15 dB in the direction of each tracked satellite from 10 to 90 deg elevation. Photographic fisheye lens images were used to categorize the fade data obtained in several test locations according to fade states of clear, shadowed, or blocked. Multipath effects in the form of annular rings can be observed when most of the sky is clear. Tree fading by a Pecan exceeding 3.5 dB and 12 dB at 50 to 10 percent probability, respectively, compared with median fades of 7.5 dB measured earlier and the discrepancy is attributed to the change in ratio when measuring over an area as opposed to along a line. Data acquired inside buildings revealed 'rf-leaky' ceilings. Satellite diversity gain in a shadowed environment exceeded 6 dB at the 10 percent probability.

Vogel, Wolfhard J.↗

Estimates of RF-Induced Erosion at Antenna-Connected Beryllium Plasma-Facing Components in JET

During high-power, ion cyclotron resonance heating (ICRH), RF sheath rectification and RF induced plasma-wall interactions (RF-PWI) can potentially limit long-pulse operation. With toroidally-spaced ICRH antennas, in an ITER-like wall (ILW) environment, JET provides an ideal environment for ITER-relevant, RF-PWI studies. JET pulses combining sequential toggling of the antennas with q95 (edge safety factor) sweeping were recently used to localize RF-enhanced Be I and Be II spectral line emission at outboard poloidal (beryllium) limiters. These measurements were carried out in the early stages of JET-ILW and in ICRF-only, L-mode discharges. The appearance of enhanced emission spots was explained by their magnetic connection to regions of ICRH antennas associated with higher RF-sheath rectification [1]. The measured emission lines were the same as those already qualified in ERO modelling of inboard limiter beryllium erosion in JET limiter plasmas [2]. In the present work, we revisit this spectroscopic study with the focus on obtaining estimates of the impact of these RF-PWI on sputtering and on net erosion of the affected limiter regions. To do this, the ERO erosion and re-deposition code [2] is deployed with the detailed geometry of a JET outboard limiter. The effect of RF-PWI on sputtering is represented by varying the surface negative biasing, which affects the incidence energy and the resulting sputtering yield. The observed variations in line emission, from [1], for JET pulse 81173 of about factor 3 can be reproduced with ~ 100 200 V bias. ERO simulations show that the influence of the respective E-field on the local Be transport is localized near the surface and relatively small. Still, the distribution of the 3D plasma parameters, shadowing and other geometrical effects are quite important. The plasma parameter simulated by Edge2D-EIRENE [3] are extrapolated towards the surface and mapped in 3D. These initial modelling results are consistent with the range of potentials anticipated through RF sheath rectification (see, e.g., [4]). Shortcomings from both the modelling and experimental side will be discussed, as will be plans for improvements in both areas method for the upcoming 2015 - 2016 JET campaign. [1] C.C. Klepper et al., J. Nucl. Mater. 438 (2013) S594 S598 [2] D. Borodin et al., Phys. Scr. T159 (2014) 014057 [3] M. Groth et al., Nucl. Fusion 53 (2013) 093016 [4] Jonathan Jacquot et al., Phys. Plasmas 21 (2014) 061509 *Corresponding author: presently at CCFE (UK) tel.: +44 1235 46 4304, e-mail: kleppercc@ornl.gov **See the Appendix of F. Romanelli et al., Proc. of the 25th IAEA Fusion Energy Conference 2014, Saint Petersburg, Russia Work supported, in part, by US DOE under Contract DE-AC05-00OR22725 with UT-Battelle, LLC.

Borodin, D.↗

Gluino production in ultrarelativistic heavy ion collisions and nuclear shadowing

In this paper, we investigate the influence of nuclear effects in the production of gluinos in nuclear collisions at the Large Hadron Collider, and estimate the transverse momentum dependence of the nuclear ratios R{sub pA}=(d{sigma}(pA)/dyd{sup 2}p{sub T})/A(d{sigma}(pp)/dyd{sup 2}p{sub T}) and R{sub AA}=(d{sigma}(AA)/dyd{sup 2}p{sub T})/A{sup 2}(d{sigma}(pp)/dyd{sup 2}p{sub T}). We demonstrate that depending on the magnitude of the nuclear effects, the production of gluinos could be enhanced, compared to proton-proton collisions. The study of these observables can be useful to determine the magnitude of the shadowing and antishadowing effects in the nuclear gluon distribution. Moreover, we test different snowmass points and slopes scenarios, corresponding to different soft, supersymmetry breaking mechanisms, and find that the nuclear ratios are strongly dependent on that choice.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Computational investigation of incident ion angles and material erosion at rough graphite and silicon carbide divertor surfaces

We present a computational investigation of the dependence of material erosion on the incident ion angle at rough graphite and silicon carbide divertor surfaces. Ion angle distributions (IADs) for D plasmas at NSTX-U and DIII-D divertors were calculated by an equation-of-motion model that traces the ion trajectories in the sheath. Then, the effective sputtering yields and ion shadowed area fractions were calculated by a Monte Carlo micro-patterning and roughness code that applied the calculated IADs to surface topographic data that were obtained from optical confocal microscopy of rough graphite and SiC divertor surfaces from NSTX-U and DIII-D experiments. The calculations found that the effective sputtering yields, the sputtering pattern, and the shadowed area are determined by the detailed surface topology rather than the root mean square roughness R RMS , which represents deviations from a flat surface. The suppression of the effective sputtering yields for rough surfaces compared to the yield for a smooth surface was accounted for by the change of the mean local incident ion angle (LIIA) (θ'). The mean surface inclination angle distribution (SIAD) (δ) was found to be a useful parameter to estimate the LIIA from the calculated IADs. We report global empirical formulas for the mean LIIA and fraction of the area shadowed from the main ions for D plasmas for rough surfaces with B-field incident angles α = 85°–89° as a function of the mean SIAD (δ). We propose the use of the mean LIIA (θ') to estimate the sputtering yield for rough surfaces from the angular dependence of the sputtering yield.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Production of inclusive Υ{hooktop}(1S) and Υ{hooktop}(2S) in p–Pb collisions at √ s NN = 5.02 TeV

We report on the production of inclusive Y{hooktop}(1S) and Y{hooktop} (2S) in p–Pb collisions at √ s NN = 5.02 TeV at the LHC. The measurement is performed with the ALICE detector at backward (-4.46< ycms <-2.96) and forward (2.03< ycms <3.53) rapidity down to zero transverse momentum. The production cross sections of the Υ{hooktop}(1S) and Υ{hooktop}(2S) are presented, as well as the nuclear modification factor and the ratio of the forward to backward yields of Υ{hooktop}(1S). A suppression of the inclusive Υ{hooktop}(1S) yield in p–Pb collisions with respect to the yield from pp collisions scaled by the number of binary nucleon–nucleon collisions is observed at forward rapidity but not at backward rapidity. The results are compared to theoretical model calculations including nuclear shadowing or partonic energy loss effects.

Abelev, B.↗

Experimental Study of Noise Shielding by a NACA 0012 Airfoil

The effects of sound source location, Mach number and angle of attack on the shielding of a laser-induced sound source by a NACA 0012 airfoil are examined. The sound source is a small plasma generated by a high energy, laser beam focused to a point. In-flow microphone measurements are acquired in the midspan plane of the airfoil over a broad range of streamwise stations, and shielding levels are calculated over different frequency ranges from the measurements acquired with and without the airfoil installed. Shielding levels are shown to increase as the source is positioned closer to the mid-chord of the airfoil, and to significantly decrease with increasing flow Mach number, except when the source is positioned near the leading edge of the airfoil. Both with and without flow, changes in angle of attack are associated with a corresponding shift of the shadow region. Finally, the effects of multipath signals, observer distance and signal scatter on the measured shielding levels are discussed.

Hutcheson, Florence V.↗

Variable Shadow Screens for Imaging Optical Devices

Variable shadow screens have been proposed for reducing the apparent brightnesses of very bright light sources relative to other sources within the fields of view of diverse imaging optical devices, including video and film cameras and optical devices for imaging directly into the human eye. In other words, variable shadow screens would increase the effective dynamic ranges of such devices. Traditionally, imaging sensors are protected against excessive brightness by use of dark filters and/or reduction of iris diameters. These traditional means do not increase dynamic range; they reduce the ability to view or image dimmer features of an image because they reduce the brightness of all parts of an image by the same factor. On the other hand, a variable shadow screen would darken only the excessively bright parts of an image. For example, dim objects in a field of view that included the setting Sun or bright headlights could be seen more readily in a picture taken through a variable shadow screen than in a picture of the same scene taken through a dark filter or a narrowed iris. The figure depicts one of many potential variations of the basic concept of the variable shadow screen. The shadow screen would be a normally transparent liquid-crystal matrix placed in front of a focal-plane array of photodetectors in a charge-coupled-device video camera. The shadow screen would be placed far enough from the focal plane so as not to disrupt the focal-plane image to an unacceptable degree, yet close enough so that the out-of-focus shadows cast by the screen would still be effective in darkening the brightest parts of the image. The image detected by the photodetector array itself would be used as feedback to drive the variable shadow screen: The video output of the camera would be processed by suitable analog and/or digital electronic circuitry to generate a negative partial version of the image to be impressed on the shadow screen. The parts of the shadow screen in front of those parts of the image with brightness below a specified threshold would be left transparent; the parts of the shadow screen in front of those parts of the image where the brightness exceeded the threshold would be darkened by an amount that would increase with the excess above the threshold.

Lu, Ed↗

Observations and Simulations of Dropout Events and Flux Decays in October 2013: Comparing MEO Equatorial With LEO Polar Orbit

We compare ESA PROBA-V observations of electron flux at LEO with those from the NASA Van Allen Probes mostly at MEO for October 2013. Dropouts are visible at all energy during four storms from both satellites. Equatorially trapped electron fluxes are higher than at LEO by 10 2 (<1 MeV) to 10 5 (>2.5 MeV). We observe a quite isotropic structure of the outer belt during quiet times, contrary to the inner belt, and pitch angle dependence of high energy injection. We find a very good overlap of the outer belt at MEO and LEO at ~0.5 MeV. We use test-particle simulations of the energetic electrons trapped in the terrestrial magnetic field to study the outer radiation belt electron flux changes during geomagnetic storms. We show that the Dst (Disturbance storm time) effect during the main phase of a geomagnetic storm results in a betatron mechanism causing outward radial drift and a deceleration of the electrons. This outward drift motion is energy independent, pitch angle-dependent, and represents a significant distance (~1 L-shell at L = 5 for moderate storms). At fixed L-shell, this causes a decay of the LEO precipitating flux (adiabatic outward motion), followed by a return to the normal state (adiabatic inward motion) during main and recovery phases. Dst effect, associated with magnetopause shadowing and radial diffusion can explain the main characteristics of outer radiation belt electron dropouts in October 2013. We also use Fokker-Planck simulations with event-driven diffusion coefficients at high temporal resolution, to distinguish instantaneous loss from the gradual scattering that depopulates the slot region and the outer belt after storms. Simulations reproduce the slot formation and the gradual loss in the outer belt. The typical energy dependence of these losses leads to the absence of scattering for relativistic and ultra-relativistic electrons in the outer belt, oppositely to dropouts.

79 ASTRONOMY AND ASTROPHYSICS↗

Pre-sheath density drop induced by ion-neutral friction along plasma blobs and implications for blob velocities

The pre-sheath density drop along the magnetic field in field-aligned, radially propagating plasma blobs is investigated in the TORPEX toroidal experiment [Fasoli et al., Plasma Phys. Controlled Fusion 52, 124020 (2010)]. Using Langmuir probes precisely aligned along the magnetic field, we measure the density n{sub se} at a poloidal limiter, where blobs are connected, and the upstream density n{sub 0} at a location half way to the other end of the blobs. The pre-sheath density drop n{sub se}/n{sub 0} is then computed and its dependence upon the neutral background gas pressure is studied. At low neutral gas pressures, the pre-sheath density drop is ≈0.4, close to the value of 0.5 expected in the collisionless case. In qualitative agreement with a simple model, this value decreases with increasing gas pressure. No significant dependence of the density drop upon the radial distance into the limiter shadow is observed. The effect of reduced blob density near the limiter on the blob radial velocity is measured and compared with predictions from a blob speed-versus-size scaling law [Theiler et al., Phys. Rev. Lett. 103, 065001 (2009)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Centrality, rapidity, and transverse-momentum dependence of cold nuclear matter effects on J/psi production in dAu, CuCu, and AuAu collisions at sq root(s{sub NN})=200 GeV

We have carried out a wide study of cold nuclear matter (CNM) effects on J/psi production in dAu, CuCu and AuAu collisions at sq root(s{sub NN})=200 GeV. We have studied the effects of three different gluon-shadowing parametrizations, using the usual simplified kinematics for which the momentum of the gluon recoiling against the J/psi is neglected as well as an exact kinematics for a 2->2 process; namely g+g->J/psi+g as expected from LO pQCD. We have shown that the rapidity distribution of the nuclear modification factor R{sub dAu}, and particularly its antishadowing peak, is systematically shifted toward larger rapidities in the 2->2 kinematics, irrespective of which shadowing parametrization is used. In turn, we have noted differences in the effective final-state nuclear absorption needed to fit the PHENIX dAu data. Taking advantage of our implementation of 2->2 kinematics, we have also computed the transverse momentum dependence of the nuclear modification factor, which cannot be predicted with the usual simplified kinematics. All the corresponding observables have been computed for CuCu and AuAu collisions and compared to the PHENIX and STAR data. Finally, we have extracted the effective nuclear absorption from the recent measurements of R{sub CP} in dAu collisions by the PHENIX collaboration.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Charged current neutrino cross section and tau energy loss at ultrahigh energies

We evaluate both the tau-lepton energy loss produced by photonuclear interactions and the neutrino charged current cross section at ultrahigh energies, relevant to neutrino bounds with Earth-skimming tau neutrinos, using different theoretical and phenomenological models for nucleon and nucleus structure functions. The theoretical uncertainty is estimated by taking different extrapolations of the structure function F{sub 2} to very low values of x, in the low and moderate Q{sup 2} range for the tau-lepton interaction and at high Q{sup 2} for the neutrino-nucleus inelastic cross section. It is at these extremely low values of x where nuclear shadowing and parton saturation effects are unknown and could be stronger than usually considered. For tau and neutrino energies E=10{sup 9} GeV we find uncertainties of a factor 4 for the tau energy loss and of a factor 2 for the charged current neutrino-nucleus cross section.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Specificity of probe measurements in diffuse plasmas of dense gases in strong electric fields

The article is devoted to extending the applicability of the probe diagnostics to the range of higher pressures of the plasma-forming gas by taking into account the effect of the probe shadow on the anode. The probe current–voltage characteristic in the diffuse plasma of a dense gas in a strong electric field was measured, and the influence of the probe potential and probe current on the dimensions of the probe shadow on the anode was studied experimentally. The experiments were carried at different currents of a steady-state glow discharge and different velocities of the gas flow through the discharge. The plasma-forming gas was nitrogen at a pressure of P = 100 Torr.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Amorphous ice on Saturnian rings and on icy satellites - Its formation, stability, and observability

Saturnian rings and icy satellites may be covered with amorphous rather than crystalline ice. Its likely source is water molecules sputtered by particles in the radiation belts, it may be stable, and its presence could be deduced from the rate of temperature drop in a shadow. Observation of this effect is, however, difficult, especially for the rings. A possible relation to the brightness anisotropy of ring A is pointed out.

Smoluchowski, R.↗

Thermal analysis of a strongback structure for a high-frequency microwave antenna concept in geosynchronous orbit

The effects of the geosynchronous thermal environment on the performance of a tetrahedral truss strongback structure for a high-frequency microwave antenna concept for earth science monitoring have been studied. Two orbit conditions (an equinox orbit with a 72-minute eclipse and a solstice orbit with no eclipse) and a range of thermal control approaches were investigated under steady state and transient conditions. The thermal control approaches included aluminum surface coatings with high and low solar-absorptivity-to-infrared-emissivity ratios, multi-layer insulation, a sun shield, and various truss element materials. The effects of both earth shadowing and shadowing by the antenna reflector on temperatures were also examined. Temperatures and corresponding structural distortion results are presented.

Farmer, Jeffery T.↗

Comparison of FFP predictions with measurements of a low-frequency signal propagated in the atmosphere

An experimental study of low-frequency propagation over a distance of 770 m was previously reported (J. Acoust. Soc. Am. Suppl. 1 86, S120 (1989)). For that study, sound speed profiles were reconstructed entirely from surface-layer micrometeorological data. When the acoustic data were compared with theoretical predictions from a fast field program (FFP), it was found that the FFP underpredicted sound levels measured in a shadow zone. Here, the effect on the predictions of including meteorological data for heights greater than the surface layer, i.e., wind profiles measured by a Doppler sodar, is discussed. Vertical structure of turbulence is simulated by stochastically perturbing the mean profiles, and the agreement between the acoustic data and FFP predictions is improved.

Wilson, K. Keith↗

Growth of Disturbances in a Flame-Generated Shear Region

Results are presented of an experimental and theoretical investigation of the growth of transverse velocity disturbances in the shear region caused by a flame in a duct. In the theoretical stability analysis, a flow field arising from a flame in a duct was analyzed. The flow was neutrally stable to symmetric disturbances and unstable to antisymmetric ones. In the experimental part of the program disturbances of various frequencies were imposed on a flame stabilized in a duct, and the effects were measured by shadow photography and photomultiplier-probe surveys.

Blackshear, Perry L , Jr↗