Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reduced Defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Investigation of the Effect of In-Plane Fiber Waviness in Composite Materials through Multiple Scales of Testing and Finite Element Modeling

Defects in materials can reduce strengths and lifetimes of manufactured parts. The number of possible defects increases with the complexity inherent in composite materials. The wind industry uses composite wind turbine blades in which the manufacturing process induces a number of defects. In order for the wind industry to continue sustainable expansion, the effects of defects must be better understood. In-plane (IP) fiber waviness is the focus of this work. The three main parts of this work include testing on the coupon level, modeling on the coupon level, and testing of beams in four-point bending (with and without defects). The coupon level testing includes partial IP waves, similar to those in manufactured parts, rather than full width IP waves. This allows investigation into complex interactions and varying failure mechanisms caused by the fiber misalignment gradient. Partial waves are also modeled to both validate testing as well as to increase robustness of a previously developed progressive damage modeling method. Lastly, a sandwich beam test specimen for testing in 4-point bending is developed to investigate the effects of fiber waviness in both tension and compression when loaded in flexure.

36 MATERIALS SCIENCE↗

Revealing Anisotropic Spinel Formation on Pristine Li- and Mn-Rich Layered Oxide Surface and Its Impact on Cathode Performance

Surface properties of cathode particles play important roles in the transport of ions and electrons and they may ultimately dominate cathode's performance and stability in lithium-ion batteries. Through the use of carefully prepared Li 1.2 Ni 0.13 Mn 0.54 Co 0.13 O 2 crystal samples with six distinct morphologies, surface transition-metal redox activities and crystal structural transformation are investigated as a function of surface area and surface crystalline orientation. Complementary depth-profiled core-level spectroscopy, namely, X-ray absorption spectroscopy, electron energy loss spectroscopy, and atomic-resolution scanning transmission electron microscopy, are applied in the study, presenting a fine example of combining advanced diagnostic techniques with a well-defined model system of battery materials. Here, we report the following findings: (1) a thin layer of defective spinel with reduced transition metals, similar to what is reported on cycled conventional secondary particles in the literature, is found on pristine oxide surface even before cycling, and (2) surface crystal structure and chemical composition of both pristine and cycled particles are facet dependent. Oxide structural and cycling stabilities improve with maximum expression of surface facets stable against transition-metal reduction. Finally, the intricate relationships among morphology, surface reactivity and structural transformation, electrochemical performance, and stability of the cathode materials are revealed.

36 MATERIALS SCIENCE↗

In situ microstructural evolution in face-centered and body-centered cubic complex concentrated solid-solution alloys under heavy ion irradiation

This study characterizes the microstructural evolution of single-phase complex concentrated solid-solution alloy (CSA) compositions under heavy ion irradiation with the goal of evaluating mechanisms for CSA radiation tolerance in advanced fission systems. Three such alloys, Cr 18 Fe 27 Mn 27 Ni 28 , Cr 15 Fe 35 Mn 15 Ni 35 , and equimolar NbTaTiV, along with reference materials (pure Ni and E90 for the Cr-FeMnNi family and pure V for NbTaTiV) were irradiated at 50 K and 773 K with 1 MeV Kr ++ ions to various levels of displacements per atom (dpa) using in-situ transmission electron microscopy. Cryogenic irradiation resulted in small defect clusters and faulted dislocation loops as large as 12 nm in face-centered cubic (FCC) CSAs. With thermal diffusion suppressed at cryogenic temperatures, defect densities were lower in all CSAs than in their less compositionally complex reference materials indicating that point defect production is reduced during the displacement cascade stage. High temperature irradiation of the two FCC CSA resulted in the formation of interstitial dislocation loops which by 2 dpa grew to an average size of 27 nm in Cr 18 Fe 27 Mn 27 Ni 28 and 10 nm in Cr 15 Fe 35 Mn 15 Ni 35 . This difference in loop growth kinetics was attributed to the difference in Mn-content due to its effect on the nucleation rate by increasing vacancy mobility or reducing the stacking-fault energy.

36 MATERIALS SCIENCE↗

Reinforcement induced microcracking during the conversion of polymer-derived ceramics

This study investigates the role of discontinuous reinforcement on the microcracking of a preceramic polymer matrix during polymer to ceramic conversion. The material system comprised a carbosilane-based, preceramic polymer reinforced with mullite particles. The preceramic resin slurry was formulated for photopolymerization on a digital light projection 3D printer. Micro X-ray computed tomography, using a synchrotron light source, monitored a printed composite part during pyrolysis. The conversion of the carbosilane matrix into Si(O)C generated microcracks in the matrix that radially extended from particles. The likelihood of microcrack formation positively correlated with particle size. The largest particles (>10 4 µm 3 volume or >60 µm side length) always abutted microcracks, while the matrix surrounding smaller particles (<5 µm) was free of microcracks. Numerical calculations showed the particles resist the shrinking matrix during its conversion. This created tensile stresses within the matrix. The driving force for microcrack growth was also analyzed with regard to the influence of matrix material parameters, particle form-factor and crack length. These results reveal the need to consider the form factor of discontinuous reinforcements, with regard to the material properties of the polymer-derived ceramic, in order to reduce or eliminate defects in the final part.

36 MATERIALS SCIENCE↗

Charge trapping properties of Ge nanocrystals grown via solid-state dewetting

In the present work, we report on the charge trapping properties of Germanium Nanocrystals (Ge NCs) self assembled on SiO 2 thin layer for promising applications in next-generation non volatile memory by the means of Deep Level Transient Spectroscopy (DLTS) and high frequency C-V method. The Ge NCs were grown via dewetting phenomenon at solid state by Ultra-High Vacuum (UHV) annealing and passivated with silicon before SiO 2 capping. The role of the surface passivation is to reduce the electrical defect density at the Ge NCs-SiO 2 interface. The presence of the Ge NCs in the oxide of the MOS capacitors strongly affects the C-V characteristics and increases the accumulation capacitance, causes a negative flat band voltage (VFB) shift. The DLTS has been used to study the individual Ge NCs as a single point deep level defect in the oxide. DLTS reveals two main features: the first electron traps around 255 K could correspond to dangling bonds at the Si/SiO2 interface and the second, at high-temperature (>300 K) response, could be originated from minority carrier generation in Ge NCs.

36 MATERIALS SCIENCE↗

Structural, optical and waveguiding properties improvement of SiO{sub 2}/TiO{sub 2} Bragg reflectors processed by the sol–gel method under the effect of Ni-doped TiO{sub 2} and annealing duration

Highlights: • The formation of anatase phase only, whatever are Ni content and annealing duration. • Transmission and PL spectra redshifted with Ni content and annealing duration. • PL lowering with Ni content is due to the recombination rate of electron–hole reduction. • Annealing duration increases the recombination rate and then the PL intensity rises. • Increasing Ni content improves waveguiding properties and then two TE modes appear. - Abstract: We investigated the nickel doped TiO{sub 2} layer and annealing duration effects on SiO{sub 2}/TiO{sub 2} Bragg reflectors. The films crystallize in pure anatase phase whatever is the Ni content and the annealing duration. In UV–vis-NIR analyses, variations of width, position and transmission coefficient of the stop-band were observed. The PL spectra red-shifted when the Ni content and annealing duration increased. As the annealing duration increases, an additional sharp emission peak appears around 867 nm, indicating a reduced number of defects. As Ni content increased, the M-lines spectroscopy shows two transverse electric polarization guided modes TE{sub 0} and TE{sub 1}, which indicates a decreased refractive index and an increased film thickness.

36 MATERIALS SCIENCE↗

Atomic Structure, Dynamics, Changes in Chemical Bonding and Semiconductor-Metal Transition in Sb 2 Se 3 : A Remarkable Material for Quantum Networks and Energy Applications

Antimony sesquiselenide has become an outstanding functional material for photovoltaics, energy storage and transformation, memory and photonic applications. Sb 2 Se 3 is one of the most successful emerging solar light absorbers and has also been identified as a highly promising ultralow-loss phase-change material (PCM) for next-generation coherent nanophotonic processors, photonic tensor cores, quantum and neuromorphic networks. Unlike benchmark telluride PCMs, Sb 2 Se 3 features a quasi-one-dimensional (1D) crystalline structure consisting of (Sb 4 Se 6 ) ∞ ribbons, lacks the typical PCM chemical bonding, and undergoes an extended semiconductor-metal transition above the melting point. Consequently, the origin of high optical contrast between crystalline (SET) and amorphous (RESET) logic states remains elusive and presents a significant challenge. Using high-energy X-ray diffraction and Raman spectroscopy over a wide temperature range, supported by first-principles simulations and complemented by thermal, optical and electrical measurements, as well as by 121 Sb-Mossbauer spectroscopy, the quasi-1D network of orthorhombic antimony sesquiselenide was found to undergo significant evolution in amorphous and supercooled Sb 2 Se 3 , leading to lower coordination, shorter interatomic distances and a higher p-electron density on antimony, indicating changes in chemical bonding. The observed novel Sb 2 Se 3 nanocrystalline polymorph, characterized by trigonal antimony coordination and more isolated Sb-Se ribbons, could help reduce multiple trapping defect states in the bandgap, which are typical of orthorhombic Sb 2 Se 3 , thereby enhancing the power-conversion efficiency of photovoltaic devices. Semimetallic and metallic liquid Sb 2 Se 3 exhibit a gradual transformation into a denser 2D and/or 3D network with higher antimony coordination. Localized electron states in the pseudogap are becoming extended, leading to an increase in electronic conductivity σ following the relationship σ ∝ N(E F ) 2 . Liquid Sb 2 Se 3 also appears to be strongly fragile, with a nonmonotonic change in viscosity and higher atomic mobility in the metallic liquid. Furthermore, these results explain extraordinary functionalities of Sb 2 Se 3 for photonic and energy applications.

antimony↗

Tailoring the Intermediate Phase to Control Formation of γ‑CsPbI3 Films

Controlling the crystallization pathway of inorganic CsPbI3 perovskite is essential for achieving high efficiency and stability in optoelectronic devices. Here, we report a solvent-engineering strategy that combines an antisolvent process with vacuum treatment (AVT) to modulate evaporation dynamics of the precursor, guiding the formation of highly oriented (CH3)2NH2PbI3 (DMAPbI3) and Cs4PbI6 intermediate phases. Synchrotron and in situ analyses revealed correlations between intermediate orientation and γ-CsPbI3 crystallinity. This directional crystallization pathway promotes vertical alignment and grain enlargement in γ-CsPbI3 films, resulting in fewer voids, lower defect densities, and reduced tensile strain. Photovoltaic devices based on AVT-processed films achieved a power conversion efficiency of 18.47% with a fill factor of 83.14% and retained 101.9% of their initial efficiency after 526 h without encapsulation. This study first reports that the quality of DMAPbI3 and Cs4PbI6 intermediates, controlled by combination of antisolvent and vacuum treatment, plays a crucial role in achieving high-quality γ-CsPbI3 films.

Yoon, Geon Woo↗

Slow-Light Mid-IR Silicon Photonic Chips for NO 2 and CH 4 Gas Detection

A compact, chip-scale mid-infrared gas sensor is demonstrated, leveraging a two-dimensional photonic crystal waveguide (PCW) fabricated on a silicon-on-insulator (SOI) platform. The PCW comprises a hexagonal lattice with lattice constant a = 860 nm and hole radius r = 0.22a, incorporating a central line defect of reduced-radius holes (r s = 0.7r) to induce slow-light propagation near the photonic band edge with a group index of approximately 73, thereby enhancing light-matter interaction. The sensor operates at fundamental absorption wavelengths of 3.42 μm for nitrogen dioxide (NO 2 ) and 3.40 μm for methane (CH 4 ), utilizing the strongest molecular vibrational transitions for maximum sensitivity. Experimental validation was conducted using dynamically diluted gas mixtures generated by mass flow controllers, with signal acquisition performed by a liquid nitrogen-cooled InSb detector. For NO 2 , the sensor exhibited excellent linear response over 5–25 ppm (part per million) with coefficient of determination R 2 = 0.9934, achieving a detection limit of 210 ppb (part per billion)─representing the first reported silicon photonic-based NO 2 detection. For CH 4 , exposure to 25 ppm resulted in a 6.4% decrease in transmitted intensity, demonstrating multigas sensing capability. The CMOS-compatible fabrication process and compact 3 mm device footprint establish this SOI-PCW platform as a scalable, low-power solution for integrated mid-infrared gas sensing, with significant potential for environmental monitoring and industrial safety applications.

Crystals↗

Atomic-scale visualization of defect-induced localized vibrations in GaN

Phonon engineering is crucial for thermal management in GaN-based power devices, where phonon-defect interactions limit performance. However, detecting nanoscale phonon transport constrained by III-nitride defects is challenging due to limited spatial resolution. Here, we used advanced scanning transmission electron microscopy and electron energy loss spectroscopy to examine vibrational modes in a prismatic stacking fault in GaN. By comparing experimental results with ab initio calculations, we identified three types of defect-derived modes: localized defect modes, a confined bulk mode, and a fully extended mode. Additionally, the PSF exhibits a smaller phonon energy gap and lower acoustic sound speeds than defect-free GaN, suggesting reduced thermal conductivity. Our study elucidates the vibrational behavior of a GaN defect via advanced characterization methods and highlights properties that may affect thermal behavior.

36 MATERIALS SCIENCE↗

Using machine learning with optical profilometry for GaN wafer screening

Abstract To improve the manufacturing process of GaN wafers, inexpensive wafer screening techniques are required to both provide feedback to the manufacturing process and prevent fabrication on low quality or defective wafers, thus reducing costs resulting from wasted processing effort. Many of the wafer scale characterization techniques—including optical profilometry—produce difficult to interpret results, while models using classical programming techniques require laborious translation of the human-generated data interpretation methodology. Alternatively, machine learning techniques are effective at producing such models if sufficient data is available. For this research project, we fabricated over 6000 vertical PiN GaN diodes across 10 wafers. Using low resolution wafer scale optical profilometry data taken before fabrication, we successfully trained four different machine learning models. All models predict device pass and fail with 70–75% accuracy, and the wafer yield can be predicted within 15% error on the majority of wafers.

36 MATERIALS SCIENCE↗

Structural relaxation in amorphous oxide semiconductor, a-In-Ga-Zn-O

Amorphous In-Ga-Zn-O (a-IGZO) is expected as a backplane transistor material to drive next-generation flat-panel and flexible displays. It has been elucidated that thermal annealing even at low temperatures <200 deg. C reduces deep subgap defects and those at {>=}300 deg. C further improve device characteristics, stability, and uniformity. These temperatures are much lower than the reported crystallization temperature (T{sub X}{approx} 600 deg. C). In this work, we investigate effects of thermal annealing on the structural and optical properties of a-IGZO thin films. We performed classical molecular dynamics simulation (CMD) and optical interference analyses including spectroscopic ellipsometry (SE). CMD reproduced the x-ray diffraction pattern of a-IGZO and exhibited a glass transition. Experimentally, it was found that T{sub X} depends largely on deposition methods and conditions, probably due to different chemical compositions. Sputter-deposited a-IGZO films exhibited onset T{sub X}{approx} 600 deg. C and crystalline volume fraction X{sub C} increased linearly from 600 deg. C. 1.2% of film densification occurred even at 600 deg. C due to crystallization. High-temperature in situ SE measurements did not detect a symptom of a glass transition temperature (T{sub g}) presumably because the T{sub X} is close to T{sub g} similar to the case of amorphous metals.

36 MATERIALS SCIENCE↗

Epitaxial Si encapsulation of highly misfitting SiC quantum dot arrays formed on Si (001)

This work examines Si overgrowth to encapsulate 3C-SiC quantum dot arrays epitaxially grown on Si substrates. Using transmission electron microscopy, we show how the crystalline quality of the Si cap depends on the growth conditions. Overgrowth at 300 °C leads to a planar, epitaxial Si cap, but with small crystallographic rotations in the cap above each quantum dot. At 400 °C growth temperature, Si exhibits reduced sticking to the SiC, leading to a non-planar cap. However, a two-step process, with thin layer grown at 250 °C followed by growth at 500 °C, leads to a planar cap with a much-reduced density of defects.

36 MATERIALS SCIENCE↗

Enhanced dielectric nonlinearity in epitaxial Pb{sub 0.92}La{sub 0.08}Zr{sub 0.52}Ti{sub 0.48}O{sub 3} thin films

High quality c-axis oriented epitaxial Pb{sub 0.92}La{sub 0.08}Zr{sub 0.52}Ti{sub 0.48}O{sub 3} films were fabricated using pulsed laser deposition on (001) LaAlO{sub 3} substrates with conductive LaNiO{sub 3} buffers. Besides confirmation of the in-plane and out-of-plane orientations using X-ray diffraction, transmission electron microscopy study has revealed columnar structure across the film thickness with column width around 100 nm. Characterization of ferroelectric properties was carried out in comparison with polycrystalline Pb{sub 0.92}La{sub 0.08}Zr{sub 0.52}Ti{sub 0.48}O{sub 3} films to extract the effect of epitaxial growth. It is found that the ratio between the irreversible Rayleigh parameter and reversible parameter increased up to 0.028 cm/kV at 1 kHz on epitaxial samples, which is more than twice of that on their polycrystalline counterparts. While this ratio decreased to 0.022 cm/kV with increasing frequency to100 kHz, a much less frequency dependence was observed as compared to the polycrystalline case. The epitaxial Pb{sub 0.92}La{sub 0.08}Zr{sub 0.52}Ti{sub 0.48}O{sub 3} films exhibited a higher mobility of domain wall and the higher extrinsic contribution to the dielectric properties, as well as reduced density of defects, indicating that it is promising for tunable and low power consumption devices.

36 MATERIALS SCIENCE↗

Low-voltage and hysteresis-free organic thin-film transistors employing solution-processed hybrid bilayer gate dielectrics

This study presents a promising approach to realize low-voltage (<3 V) organic thin-film transistors (OTFTs) exhibiting improved electrical and optical stability. Such device performance results from the use of solution-processed hybrid bilayer gate dielectrics consisting of zirconium dioxide (high-k dielectric) and amorphous fluoropolymer, CYTOP{sup ®} (low-k dielectric). Employing a very thin amorphous fluoropolymer film reduces interfacial defect-states by repelling water molecules and other aqueous chemicals from an organic semiconductor active layer due to the hydrophobic surface-property. The chemically clean interface, stemming from decrease in density of trap states improves all the key device properties such as field-effect mobility, threshold voltage, and sub-threshold swing. Furthermore, degradation by electrical bias-stress and photo-induced hysteresis were suppressed in OTFTs employing hybrid bilayer gate dielectrics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of disorder on properties of non-conventionally prepared barium titanate

Barium titanaten (BaTiO{sub 3}) nanoparticles were prepared by non-conventional as well as conventional solid state reaction. A better response about the grain size distribution was obtained in the former. The former was then milled to get grains of successive reduced sizes. The defects induced within the samples were studies by positron annihilation spectroscopy. The effect of defects on dielectric property of sample with finest grains was measured. Dielectric stability with temperature was increased with decreasing grain size and the peak was shifted towards the lower value due to the enhancement of grain boundary defects generated due to milling for long time.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ge{sub 1−x−y}Si{sub x}Sn{sub y} light emitting diodes on silicon for mid-infrared photonic applications

This paper reports initial the demonstration of prototype Ge{sub 1−x−y}Si{sub x}Sn{sub y} light emitting diodes with distinct direct and indirect edges and high quality I-V characteristics. The devices are fabricated on Si (100) wafers in heterostructure pin geometry [n-Ge/i-Ge{sub 1−x−y}Si{sub x}Sn{sub y}/p-Ge(Sn/Si)] using ultra low-temperature (T < 300 °C) depositions of the highly reactive chemical sources Si{sub 4}H{sub 10}, Ge{sub 4}H{sub 10}, Ge{sub 3}H{sub 8}, and SnD{sub 4}. The Sn content in the i-Ge{sub 1−x−y}Si{sub x}Sn{sub y} layer was varied from ∼3.5% to 11%, while the Si content was kept constant near 3%. The Si/Sn amounts in the p-layer were selected to mitigate the lattice mismatch so that the top interface grows defect-free, thereby reducing the deleterious effects of mismatch-induced dislocations on the optical/electrical properties. The spectral responsivity plots of the devices reveal sharp and well-defined absorption edges that systematically red-shift in the mid-IR from 1750 to 2100 nm with increasing Sn content from 3.5% to 11%. The electroluminescence spectra reveal strong direct-gap emission peaks and weak lower energy shoulders attributed to indirect gaps. Both peaks in a given spectrum red-shift with increasing Sn content and their separation decreases as the material approaches direct gap conditions in analogy with binary Ge{sub 1−y}Sn{sub y} counterparts. These findings-combined with the enhanced thermal stability of Ge{sub 1−x−y}Si{sub x}Sn{sub y} relative to Ge{sub 1−y}Sn{sub y} and the observation that ternary alloy disorder does not adversely affect the emission properties—indicate that Ge{sub 1−x−y}Si{sub x}Sn{sub y} may represent a practical target system for future generations of group-IV light sources on Si.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗