Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Radio Electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

W-band system-on-chip electron cyclotron emission imaging system on DIII-D

Monolithic, millimeter wave “system-on-chip” (SoC) technology has been employed in heterodyne receiver integrated circuit radiometers in a newly developed Electron Cyclotron Emission Imaging (ECEI) system on the DIII-D tokamak for 2D electron temperature profile and fluctuation evolution diagnostics. Here, a prototype module operating in E-band (72-80 GHz) was first employed in a 2 x 10 element array that demonstrated significant improvements over the previous quasi-optical Schottky diode mixer arrays during the 2018 operational campaign of the DIII-D tokamak. For compatibility with International Thermonuclear Experimental Reactor (ITER) relevant scenarios on DIII-D, the SoC ECEI system was upgraded with 20 horn-waveguide receiver modules. Each individual module contains a University of California at Davis designed W-band (75 -110 GHz) receiver die that integrates a broadband low noise amplifier (LNA), a double balanced down-converting mixer, and a x4 multiplier on the local oscillator (LO) chain. A x2 multiplier and two IF amplifiers are packaged and selected to further boost the signal strength as well as downconvert the signal frequency. The upgraded W-band array exhibits > 30 dB additional gain and 20x improvement in noise temperature comparing with the previous Schottky diode radio frequency (RF) mixer input systems; an internal 8 times multiplier chain is used to bring down the LO frequency below 12 GHz, thereby obviating the need for a large aperture for quasi-optical LO coupling and replacing it with coaxial connectors. The horn-waveguide shielding housing avoids out-of-band noise interference on each individual module. The upgraded ECEI system plays an important role for absolute electron temperature evolution and fluctuation measurements for edge and core region transport physics studies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Feasibility study for the hard x-ray free electron laser based on synergistic use of conventional and plasma accelerator technologies

Hard x-ray free electron lasers (XFELs) are great diagnostic tools in modern science. A number of XFELs have been constructed worldwide in the past decade. In the past, Los Alamos National Laboratory has expressed interest in hosting a similar facility to support ongoing Programs. The facility has been envisioned based on a conventional radio frequency (RF) accelerator technology. As a result, the estimated size and cost of the anticipated facility turned out to be large, which significantly decreased attractiveness of this project.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Measurement and modeling of the radio frequency sheath impedance in a large magnetized plasma

The DC and RF properties of radio frequency (RF) driven sheaths were studied in the Large Plasma Device (LAPD) at the University of California, Los Angeles. The experiments diagnosed RF sheaths on field lines connected to a grounded plate at one end and an ion cyclotron range of frequencies (ICRF) antenna at the other end. The experimental setup permitted measurement of the RF sheath impedance at the plate as a function of DC sheath voltage, with the latter controlled by varying the RF current applied to the antenna. Here, the DC current-voltage characteristics of these sheaths and the RF sheath impedance measurements were compared with modeling. Hot electrons, present in the LAPD plasma, were inferred to contribute significantly to both the DC and RF currents and hence the RF impedance. It was postulated that at very low power hot electrons could not access the region of the plasma subject to RF waves, resulting in an increased RF impedance. Within some experimental limitations and significant assumptions, an RF sheath impedance model was verified by the experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

A semi-analytical model of RF condensation that can handle localized power depositions

A nonlinear effect, RF (radio frequency) condensation, can be used to facilitate RF stabilization of magnetic islands. Previously studied semi-analytical models for RF condensation are suited mainly for broad deposition profiles and are unable to handle power depositions that are localized in the interior of a magnetic island. The power deposition profile of electron cyclotron waves, in particular, can be highly localized near a cyclotron resonance. Here, a model is developed that can handle both localized profiles and broad profiles. This allows a comparison of RF condensation for narrow vs broad deposition profiles, and it allows a study of the dependence of RF condensation of localized deposition profiles on key parameters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Structural Analysis of the US ITER ECH Transmission Line System

The electron cyclotron heating (ECH) and current drive system is one of the main plasma heating systems for ITER. It uses high-power microwave beams with the power deposition location steerable across the plasma cross section. Microwave power is conveyed via transmission lines (TLs) that run from the gyrotrons in the radio frequency building through the assembly hall and tokamak building to the ECH launchers within the tokamak vacuum vessel. The ECH system includes a vast array of interconnected TL waveguides, in-line components, and support structures.Finite element (FE) modeling provides an essential means of simulating the system, applying loads and determining deflections, rotations, forces, moments, and stresses in order to evaluate various structural and microwave transmission performance metrics. A representative FE model of the overall ECH TL system is developed in ANSYS®. This top-level model defines the centerline of the waveguide system. Waveguide segments are represented by line elements (beams and pipes) with equivalent section properties, and support structures are represented by boundary conditions. A systematic approach is used to model each ECH component with lumped masses and structurally equivalent stiffness matrices or ANSYS superelements.The top-level TL FE model is used to evaluate the various loads (thermal, vacuum, seismic, etc.) and operating scenarios. The top-level model directly calculates stresses in the straight aluminum waveguide segments. The model provides the forces and moments acting on the in-line components for detailed submodel assessments. Displacement results from the top-level analysis feed into a separate microwave performance model to help determine operational efficiency. All TL performance and thermal-structural requirements are met, as specified by the applicable codes and standards, and successfully documented in numerous technical reports and demonstrated at the final design review.

Shanmugasundaram, Aravind↗
DOE OSTI2023

Wireless System Development for GaN-Based Transmitters for Advanced Nuclear Reactor Environments

The market for consumer electronics is dominated by Si-based electronics. Many Si-based complementary metal–oxide–semiconductor (CMOS) devices are reaching their limitations in terms of switching frequencies, voltages, currents, and temperatures. Furthermore, these devices are widely known to be susceptible to ionizing radiation and neutrons. Advanced nuclear reactors, especially microreactors and small modular reactors, require wireless electronics that can survive larger neutron and gamma doses than Si CMOS. Because of their size, electronics will need to be placed closer to the reactor cores, and cabling capabilities may be limited. However, GaN high-electron-mobility transistors (HEMTs) have been shown to switch faster with higher gains, and they can achieve current and voltage limits beyond traditional Si CMOS. However, they have less market maturity and have undergone less testing. These GaN HEMTs have been shown to survive ionizing radiation with little effects, but the effects of neutron radiation remain widely unknown. In this report, a wireless electronic system capable of supporting multiple radiation-hardened (rad-hard) sensors is presented. The proposed transmission scheme was designed to be simple to increase the likelihood of success in the immature GaN HEMT process and in high-radiation environments. The transmission system was tested using software-defined radios to emulate the transmission scheme before the transmitter circuitry in the GaN process was developed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Sheath formation around a dielectric droplet in a He atmospheric pressure plasma

Interactions at the interface between atmospheric pressure plasmas and liquids are being investigated to address applications ranging from nanoparticle synthesis to decontamination and fertilizer production. Furthermore, many of these applications involve activation of droplets wherein the droplet is fully immersed in the plasma and synergistically interacts with the plasma. To better understand these interactions, two-dimensional modeling of radio frequency (RF) glow discharges at atmospheric pressure operated in He with an embedded lossy dielectric droplet (tens of microns in size) was performed. The properties of the sheath that forms around the droplet were investigated over the RF cycle. The electric field in the bulk plasma polarizes the dielectric droplet while the electron drift in the external electric field is shadowed by the droplet. The interaction between the bulk and sheath electric fields produces a maximum in E/N (electric field/gas number density) at the equator on one side of the droplet where the bulk and sheath fields are aligned in the same direction and a minimum along the opposite equator. Due to resistive heating, the electron temperature T e is maximum 45° above and below the equator of the droplet where power deposition per electron is the highest. Although the droplet is, on the average, negatively charged, the charge density on the droplet is positive on the poles and negative on the equator, as the electron motion is primarily due to diffusion at the poles but due to drift at the equator.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Temperature, rf field, and frequency dependence performance evaluation of superconducting niobium half-wave coaxial cavity

Recent advancement in superconducting radio frequency cavity processing techniques, with diffusion of impurities within the RF penetration depth, resulted in high quality factor with increase in quality factor with increasing accelerating gradient. The increase in quality factor is the result of a decrease in the surface resistance as a result of nonmagnetic impurities doping and change in electronic density of states. The fundamental understanding of the dependence of surface resistance on frequency and surface preparation is still an active area of research. Here, we present the result of RF measurements of the TEM modes in a coaxial half-wave niobium cavity resonating at frequencies between 0.3 ? 1.3 GHz. The temperature dependence of the surface resistance was measured between 4.2 K and 1.6 K. The field dependence of the surface resistance was measured at 2.0 K. The baseline measurements were made after standard surface preparation by buffered chemical polishing.

Dhakal, P.↗
DOE OSTI2021

High Field Side Launch of RF Waves: A New Approach to Reactor Actuators

Launching radio frequency (RF) waves from the high field side (HFS) of a tokamak offers significant advantages over low field side (LFS) launch with respect to both wave physics and plasma material interactions (PMI). For lower hybrid (LH) waves, the higher magnetic field opens the window between wave accessibility and the condition for strong electron Landau damping, allowing LH waves from the HFS to penetrate into the core of a burning plasma, while waves launched from the LFS are restricted to the periphery of the plasma. The lower of waves absorbed at higher yields a higher current drive efficiency as well. In the ion cyclotron range of frequencies (ICRF), HFS launch allows for direct access to the mode conversion layer where mode converted waves absorb strongly on thermal electrons and ions, thus avoiding the generation of energetic minority ion tails. The absence of turbulent heat and particle fluxes on the HFS, particularly in double null configuration, makes it the ideal location to minimize PMI damage to the antenna structure. The quiescent SOL also eliminates the need to couple LH waves across a long distance to the separatrix, as the antenna can be located close to plasma without risking damage to the structure. Improved impurity screening on the HFS will help eliminate the long-standing issues of high Z impurity accumulation with ICRF.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Investigating the Chemical Reactivity of Lithium Silicate Model SEI Layers

Silicon anodes suffer from an unstable solid electrolyte interphase (SEI) layer that contributes to undesirable capacity fade with cycling. A key part to addressing this unstable SEI formation is to examine how certain components of the SEI react with the electrolyte over time. One SEI component that has not been thoroughly studied in the context of the chemical reactivity against the electrolyte is lithiated silicate. Four model silicate thin films with increasing lithium content were deposited by radio frequency (RF) magnetron sputtering to study how the lithiation of the native oxide on a silicon anode affects the chemical stability of the anode surface. SiO2, Li2Si2O5, Li2SiO3, and Li3SiOx films were exposed to 1.2 M LiPF6 in the 3:7 wt% ethylene carbonate/ethyl methyl carbonate (EC/EMC) electrolyte for periods of time that are representative of the amount of time it takes to undergo cell formations. Soaked samples were rinsed, dried, and characterized by a combination of attenuated total reflectance-infrared spectroscopy (ATR-IR), focused ion beam-secondary electron microscopy (FIB-SEM), and X-ray photoelectron spectroscopy (XPS) depth profiling. It was found that the rate of the decrease in film thickness of the silicates exposed to the electrolyte over time increases as a function of the lithium content in the thin film. This reaction involves HF etching and LiPF6 salt degradation leading to silicate loss and fluorination throughout the bulk. Understanding this chemical instability is critical to determining the overall mechanism of SEI degradation over time.

ADVANCED PROPULSION SYSTEMS,ENERGY STORAGE↗
DOE OSTI2022

Advanced Diagnostics of Broad Spectrum Multipactor

Multipactor is a resonance event between electron emission and RF fields causing exponential secondary electron re-emission growth when the secondary electron yield of the primary electron impact energy exceeds unity. Multipactor is a serious problem in vacuum electron devices (VEDs) such as particle accelerators, radars, electronic warfare systems, directed energy devices, and even Hall effect thrusters. It also poses an even greater threat to space communication systems where high power, multi-channel links are required. The UC Davis and SLAC team will conduct basic research to advance the fundamental understanding of multipactor physics by developing and carrying out full spectrum, radio frequency (RF) laboratory tests aimed at understanding both single and two-surface multipactor phenomena and at evaluating novel multipactor mitigation approaches for accelerator, space-based RF systems, as well as high power microwave (HPM) applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Multiple frequency electron cyclotron resonance thruster

An electron cyclotron resonance (ECR) thruster includes a magnetic field source configured to generate a magnetic field, a thruster body that defines a chamber, the thruster body being disposed relative to the magnetic field source such that the magnetic field is present in the chamber and such that a magnetic nozzle is established, an antenna configured to propagate radio frequency (RF) power within the chamber, and a waveform generator coupled to the antenna to generate an RF waveform for the RF power. The waveform generator is configured such that the RF waveform includes multiple frequencies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

A MeerKAT-meets-LOFAR study of Abell 1413: a moderately disturbed non-cool-core cluster hosting a ~500 kpc ‘mini’-halo

Many relaxed cool-core clusters host diffuse radio emission on scales of hundreds of kiloparsecs: mini-haloes. However, the mechanism responsible for generating them, as well as their connection with central active galactic nuclei, is elusive and many questions related to their physical properties and origins remain unanswered. This paper presents new radio observations of the galaxy cluster Abell 1413 performed with MeerKAT (L-band; 872 to 1712 MHz) and LOFAR HBA (120 to 168 MHz) as part of a statistical and homogeneous census of mini-haloes. Abell 1413 is unique among mini-halo clusters as it is a moderately disturbed non-cool-core cluster. Our study reveals an asymmetric mini-halo up to 584 kpc in size at 1283 MHz, twice as large as first reported at similar frequencies. The spectral index is flatter than previously reported, with an integrated value of α = −1.01 ± 0.06, shows significant spatial variation, and a tentative radial steepening. We studied the point-to-point X-ray/radio surface brightness correlation to investigate the thermal/non-thermal connection: our results show a strong connection between these components, with a superlinear slope of $b = 1.63^{+0.10}_{-0.10}$ at 1283 MHz and $b = 1.20^{+0.13}_{-0.11}$ at 145 MHz. We also explore the X-ray surface brightness/radio spectral index correlation, finding a slope of $b = 0.59^{+0.11}_{-0.11}$. Both investigations support the evidence of spectral steepening. Finally, in the context of understanding the particle acceleration mechanism, we present a simple theoretical model which demonstrates that hybrid scenarios – secondary electrons (re-)accelerated by turbulence – reproduce a superlinear correlation slope.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Similarity properties in capacitive radio frequency plasmas with nonlinear collision processes

Abstract Similarity laws (SL) are essential for correlating the characteristics of plasmas at different dimensional scales, which have been validated for radio frequency (rf) discharges at low pressure but under limited conditions. In this work, we evaluate the effects of nonlinear collisions (e.g. stepwise ionization) on the similarity properties in capacitive rf discharges in argon across a wide range of pressure regimes via fully kinetic particle-in-cell simulations. The SL scalings of fundamental discharge parameters, e.g. the electron power absorption and electron energy probability function, are examined with and without nonlinear collisions, respectively. Without the nonlinear collisions, the similarity scalings are found to be rigorously valid. When the nonlinear collisions are considered, the similarity properties in rf discharges still exist approximately, which indicates that the violations caused by the nonlinear collisions are still minor in the studied cases. The reasons for the effectiveness of SL scalings with nonlinear collision processes are also discussed. The results from this study confirmed the validity of similarity transformations with more complex reaction kinetics, which may promote the applicability of the SL scalings for the design and fabrications of plasma devices.

Physics↗
DOE OSTI2023

Evolution and feedback of AGN jets of different cosmic ray composition

Jet feedback from active galactic nuclei (AGN) is one of the most promising mechanisms for suppressing cooling flows in cool-core clusters. However, the composition of AGN jets and bubbles remains uncertain; they could be thermally dominated, or dominated by cosmic ray proton (CRp), cosmic ray electron (CRe), or magnetic energy. In this work, we investigate the evolution and feedback effects of CRp and CRe dominated jets by conducting 3D magnetohydrodynamic simulations of AGN jet-inflated bubbles in the intracluster medium using the FLASH code. We present the evolution of their energies, dynamics, and heating, and model their expected cavity-power versus radio-luminosity relation (P cav –L R ). We find that bubbles inflated by CRe dominated jets follow a very similar dynamical evolution to CRp dominated bubbles even though CRe within bubbles suffer significantly stronger synchrotron and inverse-Compton cooling. This is because, as CRe lose their energy, the jet-inflated bubbles quickly become thermally dominated within ∼30 Myr. Their total energy stops decreasing with CR energy and evolves similarly to CRp dominated bubbles. The ability of CRe and CRp dominated bubbles to heat the intracluster medium is also comparable; the cold gas formed via local thermal instabilities is well suppressed in both cases. The CRp and CRe bubbles follow different evolutionary trajectories on the P cav –L R plane, but the values are broadly consistent with observed ranges for FR-I sources. We also discuss observational techniques that have potential for constraining the composition of AGN jets and bubbles.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2019

High-Brightness Beam Technology Development for a Future Dynamic Mesoscale Materials Science Capability

A future capability in dynamic mesoscale materials science is needed to study the limitations of materials under irreversible and extreme conditions, where these limitations are caused by nonuniformities and defects in the mesoscale. This capability gap could potentially be closed with an X-ray free-electron laser (XFEL), producing 5 × 10 10 photons with an energy of 42 keV, known as the Matter–Radiation Interactions in Extremes (MaRIE) XFEL. Over the last few years, researchers at the Los Alamos National Laboratory have developed a preconceptual design for a MaRIE-class XFEL based on existing high-brightness beam technologies, including superconducting L-band cryomodules. However, the performance of a MaRIE-class XFEL can be improved and the risk of its operation reduced by investing in emerging high-brightness beam technologies, such as the development of high-gradient normal conducting radio frequency (RF) structures. Additionally, an alternative XFEL architecture, which generates a series of high-current microbunches instead of a single bunch with uniformly high current along it, may suppress the most important emittance degradation effects in the accelerator and in the XFEL undulator. In this paper, we describe the needed dynamic mesoscale materials science capability, a MaRIE-class XFEL, and the proposed microbunched XFEL accelerator architecture in detail.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Realizing a topological diode effect on the surface of a topological Kondo insulator

Introducing the concept of topology into material science has sparked a revolution from classic electronic and optoelectronic devices to topological quantum devices. The latter has potential for transferring energy and information with unprecedented efficiency. Here, we demonstrate a topological diode effect on the surface of a three-dimensional material, SmB 6 , a candidate topological Kondo insulator. The diode effect is evidenced by pronounced rectification and photogalvanic effects under electromagnetic modulation and radiation at radio frequency. Our experimental results and modeling suggest that these prominent effects are intimately tied to the spatially inhomogeneous formation of topological surface states (TSS) at the intermediate temperature. This work provides a manner of breaking the mirror symmetry (in addition to the inversion symmetry), resulting in the formation of pn-junctions between puddles of metallic TSS. Further, this effect paves the way for efficient current rectifiers or energy-harvesting devices working down to radio frequency range at low temperature, which could be extended to high temperatures using other topological insulators with large bulk gap.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Design Criteria for High-Gradient Radio-Frequency Linacs

This article will review methods used at the SLAC National Accelerator Laboratory and other world accelerator laboratories to design high-gradient normal conducting accelerating structures. A quest for compact radio-frequency linacs fueled decades of studies toward a higher accelerating gradient. A major phenomena limiting the increase of the gradient is vacuum radio-frequency breakdown; therefore, this paper will address the breakdown physics and discuss approaches that reduce the breakdown probability. This discussion will cover both the electrical design and fabrication technology of the accelerating structures to achieve practical operating accelerating gradients in excess of 100 MV/m. Most of the data described here were obtained during the development of 11 GHz linacs for electron–positron linear colliders, so extrapolation of the results to other frequencies should be performed cautiously.

Dolgashev, Valery A. (ORCID:0000000166715402)↗