Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REDOX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Near Neutral pH Redox Flow Battery with Low Permeability and Long-Lifetime Phosphonated Viologen Active Species

A highly stable phosphonate-functionalized viologen is introduced in this work as the redox-active material in a negative potential electrolyte for aqueous redox flow batteries (ARFBs) operating at nearly neutral pH. The solubility is 1.23 m and the reduction potential is the lowest of any substituted viologen utilized in a flow battery, reaching –0.462 V versus SHE at pH = 9. The negative charges in both the oxidized and the reduced states of 1,1'-bis(3-phosphonopropyl)-[4,4'-bipyridine]-1,1'-diium dibromide ( BPP–Vi ) effect low permeability in cation exchange membranes and suppress a bimolecular mechanism of viologen decomposition. A flow battery pairing BPP–Vi with a ferrocyanide-based positive potential electrolyte across an inexpensive, non-fluorinated cation exchange membrane at pH = 9 exhibits an open-circuit voltage of 0.9 V and a capacity fade rate of 0.016% per day or 0.00069% per cycle. Overcharging leads to viologen decomposition, causing irreversible capacity fade. Our research introduces extremely stable, extremely low-permeating and low reduction potential redox active materials into near neutral ARFBs.

25 ENERGY STORAGE↗
DOE OSTI2021

Importance of Superstructure in Stabilizing Oxygen Redox in P3‐Na 0.67 Li 0.2 Mn 0.8 O 2

Abstract Activation of oxygen redox represents a promising strategy to enhance the energy density of positive electrode materials in both lithium and sodium‐ion batteries. However, the large voltage hysteresis associated with oxidation of oxygen anions during the first charge represents a significant challenge. Here, P3‐type Na 0.67 Li 0.2 Mn 0.8 O 2 is reinvestigated and a ribbon superlattice is identified for the first time in P3‐type materials. The ribbon superstructure is maintained over cycling with very minor unit cell volume changes in the bulk while Li ions migrate reversibly between the transition metal and Na layers at the atomic scale. In addition, a range of spectroscopic techniques reveal that a strongly hybridized Mn 3d–O 2p favors ligand‐to‐metal charge transfer, also described as a reductive coupling mechanism, to stabilize reversible oxygen redox. By preparing materials under three different synthetic conditions, the degree of ordering between Li and Mn is varied. The sample with the maximum cation ordering delivers the largest capacity regardless of the voltage windows applied. These findings highlight the importance of cationic ordering in the transition metal layers, which can be tuned by synthetic control to enhance anionic redox and hence energy density in rechargeable batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A Stable, Low Permeable TEMPO Catholyte for Aqueous Total Organic Redox Flow Batteries

We report aqueous organic redox flow batteries (AORFBs) are highly attractive for large-scale energy storage because of their nonflammability, low cost, and sustainability. (2,2,6,6-Tetramethylpiperidin-1-yl)oxyl (TEMPO) derivatives, a class of redox active molecules bearing air-stable free nitroxyl radicals and high redox potential (>0.8 V vs NHE), has been identified as promising catholytes for AORFBs. However, reported TEMPO based molecules are either permeable through ion exchange membranes or not chemically stable enough for long-term energy storage. Herein, a new TEMPO derivative functionalized with a dual-ammonium dicationic group, N 1 , N 1 , N 1 , N 3 , N 3 , 2, 2, 6, 6-nonamethyl-N 3 -(piperidinyloxy)propane-1,3-bis(ammonium) dichloride (N 2 -TEMPO) as a stable, low permeable catholyte for AORFBs is reported. Ultraviolet–visible (UV–vis) and proton nuclear magnetic resonance ( 1 H-NMR) spectroscopic studies reveal its exceptional stability and ultra-low permeability (1.49 × 10 -12 cm 2 s -1 ). Coupled with 1,1'-bis[3-(trimethylammonio)propyl]-4,4'-bipyridinium tetrachloride ((NPr) 2 V) as an anolyte, a 1.35 V N2-TEMPO/(NPr)2V AORFB with 0.5 m electrolytes (9.05 Wh L -1 ) delivers a high power density of 114 mW cm -2 and 100% capacity retention for 400 cycles at 60 mA cm-2. At 1.0 m electrolyte concentrations, the N 2 -TEMPO/(NPr) 2 V AORFB achieves an energy density of 18.1 Wh L -1 and capacity retention of 90% for 400 cycles at 60 mA cm -2 .

TEMPO↗
DOE OSTI2022

An SECM-Based Spot Analysis for Redoxmer-Electrode Kinetics: Identifying Redox Asymmetries on Model Graphitic Carbon Interfaces

The fundamental process in non-aqueous redox flow battery (NRFB) operation revolves around electron transfer (ET) between a current collector electrode and redox-active organic molecules (redoxmers) in solution. Here, we present an approach utilizing scanning electrochemical microscopy (SECM) to evaluate interfacial ET kinetics between redoxmers and various electrode materials of interest at desired locations. This spot-analysis method relies on the measurement of heterogeneous electron transfer rate constants (k f or k b ) as a function of applied potential (E-E 0 '). As demonstrated by COMSOL simulations, this method enables the quantification of Butler-Volmer kinetic parameters, the standard heterogeneous rate constant, k 0 , and the transfer coefficient, α. Our method enabled the identification of inherent asymmetries in the ET kinetics arising during the reduction of ferrocene-based redoxmers, compared to their oxidation which displayed faster rate constants. Similar behavior was observed on a wide variety of carbon electrodes such as multi-layer graphene, highly ordered pyrolytic graphite, glassy carbon, and chemical vapor deposition-grown graphite films. However, aqueous systems and Pt do not exhibit such kinetic effects. Our analysis suggests that differential adsorption of the redoxmers is insufficient to account for our observations. Displaying a greater versatility than conventional electroanalytical methods, we demonstrate the operation of our spot analysis at concentrations up to 100 mM of redoxmer over graphite films. Looking forward, our method can be used to assess non-idealities in a variety of redoxmer/electrode/solvent systems with quantitative evaluation of kinetics for applications in redox-flow battery research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Concentration‐dependent Cycling of Phenothiazine‐based Electrolytes in Nonaqueous Redox Flow Cells

Increasing redox-active species concentrations can improve viability for organic redox flow batteries by enabling higher energy densities, but the required concentrated solutions can become viscous and less conductive, leading to inefficient electrochemical cycling and low material utilization at higher current densities. To better understand these tradeoffs in a model system, we study a highly soluble and stable redox-active couple, N-(2-(2-methoxyethoxy)ethyl)phenothiazine (MEEPT), and its bis(trifluoromethanesulfonyl)imide radical cation salt (MEEPT-TFSI). We measure the physicochemical properties of electrolytes containing 0.2–1 M active species and connect these to symmetric cell cycling behavior, achieving robust cycling performance. Specifically, for a 1 M electrolyte concentration, we demonstrate 94% materials utilization, 89% capacity retention, and 99.8% average coulombic efficiency over 435 h (100 full cycles). This demonstration helps to establish potential for high-performing, concentrated nonaqueous electrolytes and highlights possible failure modes in such systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Characterizing the Impact of Oligomerization on Redox Flow Cell Performance

Abstract Redox flow batteries (RFBs) are hindered by complex failure modes, particularly crossover through the membrane, resulting in capacity fade and reduced cycling efficiencies. Redox‐active oligomers (RAOs) have recently been proposed for mitigating this phenomenon while maintaining sufficient transport properties; however, to date, few studies have quantified how the chemical and electrochemical properties of RAOs influence their performance in redox flow cells. Here, we demonstrate that oligomeric derivatives of 2,2,6,6‐tetramethylpiperidine 1‐oxyl (TEMPO) exhibit lower diffusivities than the monomeric species but retain facile charge transfer characteristics. The size‐dependent variations in mass transport rates directly translate to differences in flow cell polarization and symmetric cycling performance. Post‐mortem analyses reveal that oligomerization does not meaningfully alter decay processes as evinced by similar capacity fade across all species. Broadly, these findings corroborate and extend upon previously developed relationships between molecular size, electrochemical properties, and flow cell performance.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electronic Structure Distortions in Chromium Chelates Impair Redox Kinetics in Flow Batteries

Aminopolycarboxylate chelates are emerging as a promising class of electrolyte materials for aqueous redox flow batteries, offering tunable redox potentials, solubility, and pH stability through careful selection of ligands and transition metal ions. Despite their potential, the impact of molecular structure modifications on the electronic and electrochemical properties of these chelates remains underexplored. Here, in this study, we examine how introducing a hydroxyl group, often employed for its solubilizing properties, to the backbone of CrPDTA, a reference chelate material, significantly changes the thermodynamics and kinetics of the chelate's redox process. We correlate changes in molecular and electronic structures to different electrochemical responses resulting from the hydroxyl addition and show that the introduction of this functional group leads to a distortion in the octahedral coordination of chromium. Furthermore, increased anisotropic spin density and nonintegral oxidation state changes in the Cr metal center result in a larger barrier for electron transfer in CrPDTA‐OH. It is demonstrated that preserving a hexacoordinate chelate structure across a broad pH range is crucial for efficient flow battery application and it is emphasized that ligand modifications must avoid distorting the octahedral coordination of the transition metal.

25 ENERGY STORAGE↗
DOE OSTI2021

Bifunctional Ionic Covalent Organic Networks for Enhanced Simultaneous Removal of Chromium(VI) and Arsenic(V) Oxoanions via Synergetic Ion Exchange and Redox Process

Chromium (VI) and arsenic (V) oxoanions are major toxic heavy metal pollutants in water threatening both human health and environmental safety. Here, the development is reported of a bifunctional ionic covalent organic network (iCON) with integrated guanidinium and phenol units to simultaneously sequester chromate and arsenate in water via a synergistic ion-exchange-redox process. The guanidinium groups facilitate the ion-exchange-based adsorption of chromate and arsenate at neutral pH with fast kinetics and high uptake capacity, whereas the integrated phenol motifs mediate the Cr(VI)/Cr(III) redox process that immobilizes chromate and promotes the adsorption of arsenate via the formation of Cr(III)-As(V) cluster/complex. The synergistic ion-exchange-redox approach not only pushes high adsorption efficiency for both chromate and arsenate but also upholds a balanced Cr/As uptake ratio regardless of the change in concentration and the presence of interfering oxoanions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Redox‐Functionalized Semiconductor Interfaces for Photoelectrochemical Separations

Redox-mediated electrosorption is a promising platform for selective electrochemical (EC) separations, due to its molecular selectivity, high uptake, and tunability for target ions. However, the electrical energy required is mainly generated by non-renewable energy sources, which limits its sustainability and overall impact to decarbonization. Here, a redox-mediated photoelectrochemical (PEC) separation process using polyvinyl ferrocene functionalized TiO 2 nanorod electrodes is proposed, which integrates direct solar energy as a driver for the selective electrosorption. The photoelectrochemically-driven oxidation and reduction with both homogeneous and heterogeneous ferrocene-systems is investigated to establish the underlying mechanism. The PEC system can separate heavy metal oxyanions at lower voltages or even without electrical energy. At 0.3 V versus SCE, a 124 mg g −1 uptake for Mo is achieved, which is comparable to the performance of EC cells at 0.75 V versus SCE. Thus, PEC systems not only can generate energy for spontaneous redox-separations, but also can reduce electrical energy consumption by 51.4% compared to EC cells for separation processes when coupled with an external electrical energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Experimental evaluation of the role of redox during glauconite-CO 2 -brine interactions

Greensands formations are globally abundant sedimentary rocks rich in Fe clays (typically glauconite) that commonly contain natural hydrocarbon accumulations and may be important reservoirs for geologic storage of anthropogenic CO 2 . Diagenesis in greensands is commonly accompanied by the conversion of primary glauconite to siderite (FeCO 3 ), a process that could be exploited for the permanent trapping of CO 2 . Importantly, siderite formation after glauconite requires that the mostly oxidized Fe in the primary Fe clay minerals is reduced during diagenetic interactions. Here, we explore the effect of solution redox state on the stability of glauconite in sandstones with implications for the diagenetic and/or engineered formation of siderite. We performed two flow-through experiments on intact, glauconite-rich sandstone cores at 150 °C and 150 bar. Both experiments employed a 1 mol NaCl/kg, 0.1 mol NaHCO 3 /kg solution charged with ~0.58 mol CO 2 /kg solution, but the redox state of the injected fluid was manipulated between experiments in order to compare glauconite reactivity and siderite saturation state at oxidizing and reducing end-member conditions. After reaction with the oxidizing (O 2 (aq) ≈ 6 μmol/kg) fluid, chemical and Mӧssbauer spectroscopic analyses indicate the production of Fe(III)-oxy/hydroxide minerals from glauconite, whereas, in the reducing (H 2 (aq) ≈ 5–40 mmol/kg) experiment, thermodynamic calculations and coupled chemical, mineralogical, and Mӧssbauer analyses suggest glauconite dissolution and precipitation of an Fe(II) mineral, likely siderite, and minor magnetite formation. These experimental results, along with thermodynamic calculations, confirm that solution redox state is the master variable dictating siderite formation in greensands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Evidence of redox cycling as a sub-mechanism in hydrogen production during ethanol steam reforming over La 0.7 Sr 0.3 MnO 3-x perovskite oxide catalysts

Ethanol steam reforming (ESR) is of societal interest. Here, in this work, experiments were conducted to ascertain if some of the H 2 is produced by a redox cycle involving H 2 O filling oxygen vacancies over reducible oxide catalysts. Redox cycling experiments were performed over La 0.7 Sr 0.3 MnO 3-x (100) in ultra-high vacuum. It was found that H 2 was produced from redox cycling with alternating ethanol and water exposures over La 0.7 Sr 0.3 MnO 3-x (100), with both half-cycles occurring at temperatures ≤800 K. In the first half-cycle, ethanol ‘directly’ reduced the surface to create oxygen vacancies (not by a CO intermediate), and in the second half-cycle water filled oxygen vacancies to make H 2 . The H 2 production during the water exposure has a half-cycle turnover frequency of >3.2 × 10 -2 molecules site -1 s -1 in the temperature range of 700–800 K, which is fast enough to be part of the ESR full catalytic cycle. Flowing both reactant gases together, ethanol and water, over La 0.7 Sr 0.3 MnO 3-x (100) and La 0.7 Sr 0.3 MnO 3-x powders significantly increases hydrogen production compared to pure ethanol. The results suggest that steady state ESR includes a sub-mechanism of ethanol ‘directly’ reducing the surface to create oxygen vacancy, and water filling oxygen vacancy to make some of the H 2 by a Mars van Krevelen type mechanism.

08 HYDROGEN↗
DOE OSTI2021

A Transient-Response methodology based on experiments and modeling for Cu-Redox Half-Cycle kinetic analysis on a Cu-SSZ-13 SCR catalyst

In this report the Standard SCR reaction catalyzed by Cu-SSZ-13 is a redox process consisting of a reduction half cycle (RHC) and an oxidation half cycle (OHC) that cycle the active Cu sites between the Cu(II) and Cu(I) states. In the current work, a transient-response methodology consisting of experimental transient response Cu-redox (TRCR) measurements and kinetic modeling was developed for detailed study of individual SCR Cu-redox half cycles. The TRCR protocol allows quantification of the reducible Cu density, Cu(II)-Cu(I) partitioning, relative native RHC and OHC rates, and limiting half cycle during SCR. The half-cycle kinetics are studied over a wide (170–450 °C) temperature, and in differential segments along the catalyst length using spatially resolved capillary inlet mass-spectrometry (SpaciMS). The protocol alone provides two independent measures indicating that OHC increases faster than RHC with temperature, and that at all but the lowest temperature SCR is RHC limited. Introducing the transient kinetic models allows half-cycle reaction pathways, orders and activation energies to be studied and determined; e.g., RHC involves surface and gas-phase NH 3 routes, and OHC with O 2 involves dimer formation. Application of the full methodology provides further confirmation and quantification of the protocol conclusions, and specifically the first measurements of RHC and OHC activation energies; specifically for parallel RHC surface and gas-phase routes, and experimentally obtained OHC activation energy vs. first-principle calculations in the literature. Beyond insights related to the degreened catalyst studied here, the methodology provides a broadly available approach for quantifying how aging processes selectively impact RHC and OHC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Enabling high rate capability, low internal resistance, and excellent cyclability for vanadium redox flow batteries utilizing ultrafast laser-structured graphite felt

The electrochemical performance of vanadium redox flow batteries (VRFBs) was enhanced via laser-patterned graphite felt (GF) electrodes. The laser-structured GF electrodes engineered via preparing a series of well-ordered microscopic channel structures with an average width of 200 μm, creating a three-dimensional carbon framework. The ultrafast laser patterning increased the porosity by 10%, as compared to pristine electrode. The analysis of the overpotential distribution using electrochemical impedance spectroscopy revealed that the electrode polarization involving charge transfer and diffusion resistance is strongly alleviated with the aid of carbon micro-perforation. The advanced design of laser-structured GF electrode also exhibits high rate capability, low internal resistance, and excellent cyclability. The improved performance was attributed to the synergistic effect involving (i) high electrochemically active surface area for rapid electrochemical reactions (i.e., V(II)/V(III) and V(IV)/V(V) redox couples) and (ii) excellent transport properties for facile electron/ion/species transport. The micro-scale channels created with the laser-ablation technique act as capillary structures and enabled homogeneous and rapid wetting of GF electrodes as formulated with the classical Washburn equation. The VRFB equipped with the laser-structured GF electrodes delivered a high discharge capacity with exceptional capacity retention upon extended cycling (>84.9%). In conclusion, accordingly, the design of laser-structured electrode paves the pathway towards finely tuning the electrode internal microstructure for improved cyclability, durability, and capacity retention in various electrochemical energy storage/conversion devices (e.g. all-vanadium redox flow batteries).

25 ENERGY STORAGE↗
DOE OSTI2023

Colocalized Raman spectroscopy – scanning electrochemical microscopy investigation of redox flow battery dialkoxybenzene redoxmer degradation pathways

Non-aqueous redox flow batteries offer high voltages for grid-level energy storage technologies. However, decomposition of the redoxmers - redox-active molecules that make up the anolyte and catholyte in the negative and positive cell compartments - is an important challenge to overcome for long-term storage. Here, we present a spectroelectrochemical study of the catholyte candidate 2,3-dimethyl-1,4-dialkoxybenzene (C7) and its decomposition mechanisms in the presence of a model nucleophilic base, pyridine. We utilize colocalized Raman microscopy and scanning electrochemical microscopy (Raman-SECM) to quantify the chemical rates of decom-position and qualitatively identify the reaction intermediates and products. A detailed study on how the Raman-SECM parameters (electrode distance, substrate electrode, and laser focal height) influence the Raman signal of the charged catholyte C7 ∙+ is presented. Using optimized conditions, we monitored the deprotonation of C7 ∙+ via Raman spectroscopy and the subsequent hydrogen abstraction from solvent molecules to regenerate C7 via electrochemistry. Finite element modeling was used to fit electrochemical and spectroscopic data, quantifying the deprotonation rates as k dep = 2000 and 700 L mol -1 s -1 and abstraction rates as k abs = 0.5 and 0.2 s - 1 in propylene carbonate and acetonitrile solvents, respectively. Our results show the value of spatiotemporal reso-lution in evaluating the chemical and electrochemical behavior of materials for redox flow batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Techno-economic analysis of non-aqueous hybrid redox flow batteries

Renewable energy has become indispensable to improving human life, but its growth is hampered by a lack of cost-effective energy storage systems to solve the intermittency problem. Non-aqueous hybrid redox flow batteries (NAqHRFBs), based on lithium metal anode and organic redox molecules (redoxmers), have been investigated as an attractive energy storage option because of their high cell voltages and energy densities compared to other redox flow battery candidates. However, little is known about the economic potential of NAqHRFBs, as well as the operational and materials impacts. This research establishes a techno-economic model to analyze the capital costs of NAqHRFBs with selected organic redoxmers, including 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO). Sensitivity analyses for current density, area-specific resistance, cell voltage, electrolyte composition, redoxmer price, and equivalent molecular weight indicate the key factors in controlling NAqHRFB capital cost. To make the current NAqHRFB cost-effective, the first priority is to increase the operation current density over 10 times of those used in lab-scale tests, followed by adjusting redoxmer-related characteristics to afford more cost reduction space such as decreasing the unit price by ~20 fold. The results have shed light on potential material development and system engineering directions to make NAqHRFBs viable for renewable energy storage.

25 ENERGY STORAGE↗
DOE OSTI2021

In situ spectroscopic insights into the redox and acid-base properties of ceria catalysts

Cerium oxide (ceria) plays an important and fascinating role in heterogeneous catalysis as illustrated by its versatile use as a catalyst, a catalyst support, or a promotor in various oxidation and reduction reactions. Central to these reactions is the rich defect chemistry, facile redox capability, and unusual acid-base properties of ceria. Understanding the unique redox and acid-base properties of ceria is essential to build the structure-catalysis relationship so that improved catalytic functions can be achieved for ceria-based materials. Among the characterization toolbox, spectroscopic approach indisputably stands out for its unparalleled power in offering chemical insights into the surface properties of ceria at atomic and molecular level. In this review, we summarize advances in revealing the redox and acid-base properties of ceria via a variety of spectroscopic methods including optical, X-ray, neutron, electronic and nuclear spectroscopy. Both direct spectroscopy characterization and its coupling with probe molecules are analyzed to illustrate how the nature, strength and density of different surface sites are influenced by the pretreatment, the morphology and size of ceria nanoparticles. Further directions in taking advantage of in situ/operando spectroscopy for better understanding the catalysis of ceria-based materials are detailed in the summary and outlook section.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

High Throughput Mapping of Single Molecules’ Redox Potentials on Electrode

By synchronizing electrochemical potential scanning with a single-molecule localization super-resolution fluorescence microscope, kinetic fluorescence changes of hundreds of single molecular redox events were tracked simultaneously with high throughput, and subsequent cross-correlation function analysis mapped single molecules’ redox potentials (times) out on the imaging area from site to site in unprecedented detail by extracting electrochemically induced fluorescence change from apparently random fluorescence on/off blinking. This work paves the way toward mapping redox states at single-molecule levels in high throughput in chemical and biological systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Thermal Gradient Effects on Redox Evolution and Volatility-Driven Fractionation in Ternary U/Ce/Cs Condensates

Understanding how thermal history influences redox evolution and chemical fractionation is essential for characterizing high-temperature condensation in complex materials, including nuclear debris. Here, we tested the hypothesis that distinct thermal regimes in a plasma flow reactor influence redox pathways and elemental partitioning in ternary U/Ce/Cs systems. A configurable plasma flow reactor was modified with an external tube furnace to impose two distinct thermal gradients: continuous ambient cooling and a furnace-assisted thermal hold-up near 1400 K followed by rapid cooling. Transmission electron microscopy characterized phase identity, morphology, and nanoscale element distributions, while inductively coupled plasma-mass spectrometry quantified bulk elemental ratios. Across both thermal regimes, uranium and cerium condensed as UO 2 and CeO 2 as dominant refractory oxide products. Uranium partially oxidized to α-UO 3 during extended ambient cooling, while furnace-assisted hold-up preserved UO 2 and produced partial reduction of cerium to Ce 2 O 3 . Cesium remained volatile upstream and condensed later in the reactor, forming Cs 2 O and Cs-uranate phases with the highest incorporation after thermal hold-up. Bulk ICP-MS measurements supported these observations. U/Ce ratios remained comparatively stable and Cs displayed delayed and apparent transient enrichment that matched the nanoscale measurements. This integrated approach provides a quantitative method for linking thermal gradients to redox evolution and volatility-driven fractionation. These results show how the plasma flow reactor can identify where equilibrium descriptions remain adequate and where kinetic effects from residence time and temperature history must be considered when interpreting condensation behavior in multicomponent systems.

and nuclear chemistry↗