Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RECOILS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

He, Ne and Ar in chondritic Ni-Fe as irradiation hardness sensors.

Noble gas analyses of the Ni-Fe of 9 L, 5 H, and 2 LL chondrites quantitatively support previous suggestions of radiogenic He-4 recoil and He-3 deficits. Furthermore, noble gases in the Ni-Fe show evidence for in situ produced radiogenic He-4 and in some cases for recoil loss of Ar-38 and gain of Ne-21. The ratio of spallogenic Ar-38 and Ne-21 in the metal phase is found to correlate strongly with He-3/Ne-21 and Ne-22/Ne-21 in bulk samples of these chondrites. This is proof of the dependence of these ratios on the irradiation hardness experienced by the meteoroid in space. 'Hardness indices' n equals 1.9-2.2 are found, indicating that on the average the stone meteoroids from which the samples came were smaller in mass than iron meteoroids. The spallogenic Ne-21/Ar-38 ratio in metallic Ni-Fe can be used with the semi-empirical production model deduced from the Grant iron meteorite to calibrate spallogenic He-3/Ne-21 and Ne-21/Ar-38 in bulk samples of L, LL and H chondrites for meteoroid size and sample location allowing the estimation of minimal meteoroid masses.

Nyquist, L.↗

Single event upset (SEU) of semiconductor devices - A summary of JPL test data

The data summarized describe single event upset (bit-flips) for 60 device types having data storage elements. The data are from 15 acceleration tests with both protons and heavier ions. Tables are included summarizing the upset threshold data and listing the devices tested for heavy ion induced bit-flip and the devices tested with protons. With regard to the proton data, it is noted that the data are often limited to one proton energy, since the tests were usually motivated by the engineering requirement of comparing similar candidate devices for a system. It is noted that many of the devices exhibited no upset for the given test conditions (the maximum fluence and the maximum proton energy Ep are given for these cases). It is believed, however, that some possibility of upset usually exists because there is a slight chance that the recoil atom may receive up to 10 to 20 MeV of recoil energy (with more energy at higher Ep).

Nichols, D. K.↗

Electron-positron pair production by ultrarelativistic electrons in a soft photon field

The fully differential cross section for photon-electron pair production is integrated numerically over phase space. Results are obtained for the astrophysically interesting case in which the interaction between an ultrarelativistic electron and a soft photon results in electron-positron pair production. The positron spectrum is a function of the energies of both the photon and the electron, as well as the angle of interaction. It is found that the energy at which the positron distribution peaks is inversely proportional to the photon energy and independent of the electron energy. The positron spectrum is integrated once more over initial electron energies for a power-law energy distribution of primary electrons. The same procedure is repeated for the recoil particle; it is shown that the peak of the recoil energy distribution depends linearly on the energy of the primary electron. Finally, semianalytical expressions are obtained for the energy losses of the primary electrons.

Mastichiadis, A.↗

Absolute flux measurements for swift atoms

While a torsion balance in vacuum can easily measure the momentum transfer from a gas beam impinging on a surface attached to the balance, this measurement depends on the accommodation coefficients of the atoms with the surface and the distribution of the recoil. A torsion balance is described for making absolute flux measurements independent of recoil effects. The torsion balance is a conventional taut suspension wire design and the Young modulus of the wire determines the relationship between the displacement and the applied torque. A compensating magnetic field is applied to maintain zero displacement and provide critical damping. The unique feature is to couple the impinging gas beam to the torsion balance via a Wood's horn, i.e., a thin wall tube with a gradual 90 deg bend. Just as light is trapped in a Wood's horn by specular reflection from the curved surfaces, the gas beam diffuses through the tube. Instead of trapping the beam, the end of the tube is open so that the atoms exit the tube at 90 deg to their original direction. Therefore, all of the forward momentum of the gas beam is transferred to the torsion balance independent of the angle of reflection from the surfaces inside the tube.

Fink, M.↗

Infrared absorption study of neutron-transmutation-doped germanium

Using high-resolution far-infrared Fourier transform absorption spectroscopy and Hall effect measurements, the evolution of the shallow acceptor and donor impurity levels in germanium during and after the neutron transmutation doping process was studied. The results show unambiguously that the gallium acceptor level concentration equals the concentration of transmutated Ge-70 atoms during the whole process indicating that neither recoil during transmutation nor gallium-defect complex formation play significant roles. The arsenic donor levels appear at full concentration only after annealing for 1 h at 450 C. It is shown that this is due to donor-radiation-defect complex formation. Again, recoil does not play a significant role.

Park, I. S.↗

Multistroke cloud-to-ground strike to the NASA F-106B airplane

An analysis of electromagnetic waveform records and video images of a multistroke cloud-to-ground (CG) strike to the NASA F-106B instrumented airplane is presented. The CG flash started as a lightning strike triggered by the airplane and later produced multiple return strokes to the ground (the ground strike network registered six return strokes). Although there are some uncertainties in data interpretation resulting from lack of independent measurements with other than the airborne instruments, recoil streamers and eight sequences of dart leaders followed by return strokes (two more than were indicated by the ground network) were identified in the airborne data. At least three of the subsequent return strokes were attached to the airplane. The analysis provides evidence that formation of recoil streamers and dart leaders is accompanied by a surge in continuous current. This feature is similar to that observed in the bidirectional leader development during lightning initiation on the airplane.

Mazur, Vladislav↗

Description and interpretation of aircraft lightning attachment electric and magnetic field measurements and video observation

In 1988, ONERA carried out a complete airborne lightning characterization program. Among other features, the program has provided a significant amount of data from analog records of electric and magnetic field sensors to give a description of all stages of the lightning process. The initiation phase has a description of all stages of the lightning process. The initiation phase has been described in the past, so the present objective is to give a description of the other stages of the discharge, based on the observation of analog electromagnetic waveforms and of fast video (200 f/s) image processed pictures. During lightning attachment, the aircraft remains electrically connected to the lightning channel where a large variety of physical processes occur. These physical processes include recoil streamers, return strokes, and even other initiation processes of secondary discharges. Typical records of analog electromagnetic field along with relative luminosity variation of the channel, which shows that there is no extinction of the continuous current throughout the discharge process. A computation of current and potential waveforms using the transmission line formalism is presented and gives satisfactory results for the representation of two of the typical waveforms observed in the recoil streamer processes.

Moreau, J. P.↗

The evolution of a primordial binary population in a globular cluster

A simple model is presented for the evolution of a primordial binary population in a globular cluster. Monte Carlo simulations are given for an initial population of 50,000 binaries against a fixed background population of 500,000 single stars in a tidally truncated cluster model. Individual histories of all binaries are followed through mass segregation, scattering recoil, escape from the cluster, or coalescence. It is found that most binaries are destroyed by binary-binary interactions, with the rest escaping in the point-mass approximation. In a more realistic model, the majority of the rest merge. At any instant, most of the remaining binaries are drifting in toward the center before their first strong encounter. A typical binary spends most of its active life in or near the cluster core. The few binaries which receive a recoil sufficient to place them in the halo past the half-mass radius remain there long enough to make a significant contribution to the radial binary distribution.

Hut, Piet↗

Formation of very strongly magnetized neutron stars - Implications for gamma-ray bursts

It is proposed that the main observational signature of magnetars, high-field neutron stars, is gamma-ray bursts powered by their vast reservoirs of magnetic energy. If they acquire large recoils, most magnetars are unbound from the Galaxy or reside in an extended, weakly bound Galactic corona. There is evidence that the soft gamma repeaters are young magnetars. It is argued that a convective dynamo can also generate a very strong dipole field after the merger of a neutron star binary, but only if the merged star survives for as long as about 10-100 ms. Several mechanisms which could impart a large recoil to these stars at birth, sufficient to escape from the Galactic disk, are discussed.

Duncan, Robert C.↗

Bremsstrahlung emission of the SN1987A interior

The down-scattering of gamma photons stores a significant fraction of the total energy in recoil electrons. This paper presents the bremsstrahlung emission of those recoil electrons in SN1987A. If the bolometric luminosity derives from radioactive decay, the bremsstrahlung emissivity must be present, but has not previously been treated. Initially it was our hope to account for the Ginga 16-28 keV measurement of SN1987A or to find a detectable X-ray luminosity near 1 keV for ROSAT. Although this bremsstrahlung emission fails to explain Ginga fluxes, it dominates the X-ray fluxes below 20 keV and can have detectable consequences for the X-ray lines from circumstellar matter. Results for day 175, 500, 1000, and 1500 are shown.

The, Lih-Sin↗

Search for Cm-248 in the early solar system

Possible evidence for the presence of Cm-248 in the early solar system was reported from fission gas studies (Rao and Gopalan, 1973) and recently from studies of very high nuclear track densities (not less than 5 x 10 exp 8/sq cm) in the merrillite of the H4 chondrite Forest Vale (F.V.) (Pellas et al., 1987). We report here an analysis of the isotopic abundances of xenon in F.V. phosphates and results of track studies in phosphate/pyroxene contacts. The fission xenon isotopic signature clearly identifies Pu-244 as the extinct progenitor. We calculate an upper limit Cm-248/Pu-244 to be less than 0.0015 at the beginning of Xe retention in F.V. phosphates. This corresponds to an upper limit of the ratio Cm-248/U-235 of not greater than 5 x 10 exp -5 further constraining the evidence for any late addition of freshly synthesized actinide elements just prior to solar system formation. The fission track density observed after annealing the phosphates at 290C (1 hr, which essentially erases spallation recoil tracks) is also in agreement with the Pu-244 abundance inferred from fission Xe. The spallation recoil tracks produced during the 76 Ma cosmic-ray exposure account for the very high track density in merrillites.

Lavielle, B.↗

Monte Carlo Treatment of Displacement Damage in Bandgap Engineered HgCdTe Detectors

The conclusion are: 1. Description of NIEL calculation for short, mid, and longwave HgCdTe material compositions. 2. Full recoil spectra details captured and analyzed Importance of variance in high Z materials. 3. Can be applied directly to calculate damage distributions in arrays. 4. Future work will provide comparisons of measured array damage with calculated NIEL and damage energy distributions. 5. Technique to assess the full recoil spectrum behavior is extendable to other materials.

Fodness, Bryan C.↗

Modeling Kicks from the Merger of Generic Black-hole Binaries

Recent numerical relativistic results demonstrate that the merger of comparable-mass spinning black holes has a maximum "recoil kick" of up to approx. 4000 km/s. However the scaling of these recoil velocities with mass ratio is poorly understood. We present new runs showing that the maximum possible kick parallel to the orbital axis does not scale as approx. eta(sup 2) (where eta is the symmetric mass ratio), as previously proposed, but is more consistent with approx. eta(sup 3). We discuss the effect of this dependence on galactic ejection scenarios and retention of intermediate-mass black holes in globular clusters. S

Baker, John G.↗

Human Outer Solar System Exploration via Q-Thruster Technology

Propulsion technology development efforts at the NASA Johnson Space Center continue to advance the understanding of the quantum vacuum plasma thruster (QThruster), a form of electric propulsion. Through the use of electric and magnetic fields, a Q-thruster pushes quantum particles (electrons/positrons) in one direction, while the Qthruster recoils to conserve momentum. This principle is similar to how a submarine uses its propeller to push water in one direction, while the submarine recoils to conserve momentum. Based on laboratory results, it appears that continuous specific thrust levels of 0.4 - 4.0 N/kWe are achievable with essentially no onboard propellant consumption. To evaluate the potential of this technology, a mission analysis tool was developed utilizing the Generalized Reduced Gradient non-linear parameter optimization engine contained in the Microsoft Excel® platform. This tool allowed very rapid assessments of "Q-Ship" minimum time transfers from earth to the outer planets and back utilizing parametric variations in thrust acceleration while enforcing constraints on planetary phase angles and minimum heliocentric distances. A conservative Q-Thruster specific thrust assumption (0.4 N/kWe) combined with "moderate" levels of space nuclear power (1 - 2 MWe) and vehicle specific mass (45 - 55 kg/kWe) results in continuous milli-g thrust acceleration, opening up realms of human spaceflight performance completely unattainable by any current systems or near-term proposed technologies. Minimum flight times to Mars are predicted to be as low as 75 days, but perhaps more importantly new "retro-phase" and "gravity-augmented" trajectory shaping techniques were revealed which overcome adverse planetary phasing and allow virtually unrestricted departure and return opportunities. Even more impressively, the Jovian and Saturnian systems would be opened up to human exploration with round-trip times of 21 and 32 months respectively including 6 to 12 months of exploration at the destinations. Finally, interstellar trip times are assessed at milli-g acceleration levels.

Joosten, B. Kent↗

Neutron Structure Functions at Large Bjorken X

The E12-10-002 (F2) experiment ran in Hall C at JLab to extract the F2 structure functions of proton and neutron from inclusive H(e, e0) and D(e, e0) reactions in the high Bjorken x region. Those extractions put constraints on the Parton Distribution Functions PDFs (especially at large Bjorken x), and facilitate the study of Quark Hadron Duality. The F2 experiment measurements covers a large kinematic range in x from 0.2 to 1.0, and in Q2 from 4 to 16 GeV2 . While the proton F2 structure function has been studied extensively through inelastic electron-proton scattering, much less is known about neutron structure due to the unavailability of high density, free neutron targets. The BONuS12 experiment was proposed to measure the neutron F2 on a nearly free neutron within a weakly bound deuteron target via the spectator tagging method. Tagging the slow backward moving spectator protons minimizes both off-shell and final-state interaction effects, and the measured proton momentum is used to correct for the initial-state momentum of the struck neutron. The recoil detector is used to detect spectator protons with momenta 70 < ps < 150 MeV/c. This dissertation outlines the design, construction and testing of the recoil detector, Radial Time Projection Chamber (RTPC) and discusses the results of the H(e, e0) and D(e, e0) cross sections and the F2 structure functions obtained from the Hall C F2 data analysis.

Nadeeshani, Sooriyaarachchilage↗

Scintillating Bubble Chambers for Direct Dark Matter Detection, and an Update on SBC-LAr10

The Scintillating Bubble Chamber (SBC) Collaboration aims to use the liquid-noble bubble chamber technology as a low-threshold detector for dark matter particles of 1-10 GeV/c2. The detector combines the remarkable electron recoil (ER) discrimination of the bubble chamber with the event-by-event energy resolution provided by liquid argon (LAr) scintillation, with the crucial added benefit that ER discrimination in liquid-noble bubble chambers extends to much lower thresholds than in past freon-filled bubble chambers, with the potential for quasi-background-free operation at thresholds of 100 eV in nuclear recoil (NR) energy. SBC has developed two functionally identical 10 kg detectors: SBC-LAr10 at Fermilab will calibrate low-threshold performance, while the radio-pure SBC-SNOLAB chamber will execute SBC s first deep-underground dark matter search. SBC-LAr10 at Fermilab was recently installed in the MINOS tunnel 100 meters underground, and the first bubbles are expected this fall. I will present the current status of SBC-LAr10 and describe the suite of gamma and neutron calibrations we will execute. The calibrations will confirm the physics reach of this new technology, motivating not just the SBC-SNOLAB chamber now being assembled but also future searches into the solar neutrino fog at 1 GeV/c2.

Sheng, Zhiheng↗

Doppler effect in rotating systems and Mössbauer rotor experiments

We address once more the problem of the physical interpretation of the Mössbauer effect in a rotating system in the view of the recently discovered extra energy shift (EES) between emitted and absorbed resonant radiation, which emerges in addition to the usual second order Doppler shift for an orbiting absorber. We highlight that both fractional components of the total energy shift have the same sign and correspond to the blueshift of the resonant radiation propagating from the rotational axis to the rotor rim. We indicate a possible way of understanding the origin of the EES in terms of combining metric effects in rotating systems with the quantum mechanical description of resonant nuclei confined in crystal cells by taking into account the recoil-free essence of the Mössbauer effect, where no energy is transmitted to the source (absorber) during the emission (absorption) of resonant radiation.

36 MATERIALS SCIENCE↗

Microstructural banding of directed energy deposition-additively manufactured 316L stainless steel

The microstructures of 316 L stainless steel created by rapid solidification are investigated here by comparing the similar microstructures of individual hatches of directed energy deposition additive manufacturing (DED-AM) and those of single, laser surface-melted tracks formed on a solid plate. High recoil pressure, which is exponentially dependent on the laser beam power density, induces convection of the melt pool, which causes formation of microstructural bands in the as-solidified microstructure. The microstructural bands are associated with changes in the chromium concentration and are a significant component of the inhomogeneous microstructure of DED-AM.

36 MATERIALS SCIENCE↗